Contents Before Use USB/SD card Precautions ..............4 Connecting a USB device ........27 Safety Precautions Inserting the SD card ..........28 and Important Information ........5 USB/SD card Basic Operation .......28 How to read this manual ......... 6 Search Operation ............30 Basic Operations iPod/iPhone Functions of the Buttons on the Front Panel ...
Page 3
Bluetooth Control Connection/Installation Information for using Bluetooth® devices ..48 Before Installation ............76 Register from the Bluetooth unit ......49 Installing the unit .............77 Bluetooth Setup ............50 Troubleshooting Playing Bluetooth Audio Device ......52 Using Hands-Free Unit ..........54 Problems and Solutions .........84 Hands-Free Setup .............58 Error Messages ............85 Other External Components Appendix...
Called • When you purchase optional accessories, lens fogging, this condensation on the lens check with your KENWOOD dealer to make may not allow discs to play. In such a situation, sure that they work with your model and in remove the disc and wait for the condensation your area.
• You cannot play a disc that has not been and follow the instructions in this manual. finalized. (For the finalization process see your Neither KENWOOD nor Garmin shall be liable for writing software, and your recorder instruction problems or accidents resulting from failure to manual.)
• In this manual, each model name is conditions, or other factors that may affect safety abbreviated as follows. or timing while driving. – DNX8170DABS: Use the navigation system only as a navigational – DNX7170DABS: aid. Do not attempt to use the navigation system –...
Basic Operations Basic Operations Functions of the Buttons on the Front Panel DNX8170DABS/ DNX7170DABS NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
Page 8
Basic Operations Number Name Motion Disc insert • A slot to insert a disc media. slot SD card slot • A slot to insert an SD card. • You can play audio/visual file in the card. * • An SD card slot for upgrading the map. For how to upgrade the map, refer to the instruction manual of the navigation system.
Basic Operations Number Name Motion • Displays the navigation screen. • Displays the APP (CarPlay) screen. • Pressing for 1 second displays the Voice Recognition screen (P.55). Volume • Turn to adjust the volume. Knob • Press to display the pop-up menu. •...
Basic Operations Initial Settings Display Set the button illumination color. If it is hard to see the image on the screen Initial setup even after adjusting the front panel angle, adjust the viewing angle. Perform this setup when you use this unit first 1 Touch [Display].
Page 11
Basic Operations Security Code Setup Enter the same code again and touch [Enter]. You can set up a security code to protect your Now, your security code is registered. receiver system against theft. When the Security Code function is activated, NOTE the code cannot be changed and the function •...
Basic Operations Calendar/clock settings Adjusting the volume To adjust the volume (0 to 40), Press the [MENU] button. Popup menu appears. Press [R] to increase, and press [S] to decrease. Touch [SETUP]. Holding [R] increases the volume continuously to level 15. SETUP Menu screen appears.
Basic Operations Detaching The Front Panel Attaching the front panel: Hold the panel securely so as not to drop it accidentally, and fit it onto the attaching plate until it is firmly locked. You can detach the front panel to prevent theft.
Basic Operations HOME screen descriptions Source selection screen descriptions Most functions can be performed from the HOME screen. You can display all playback sources and options on the source selection screen. • Displays the control screen of current source. • Changes the playback source. •...
Page 15
Basic Operations To select the playback source on the • Plays a disc. (P.22) HOME screen • Plays an iPod/iPhone. (P.31) • Plays files on a USB device. (P.28) (P.28) • Plays files on an SD card. * • Switches to the Spotify. (P.38) The 3 items displayed on the source selection •...
Basic Operations Put the unit in standby Source control screen descriptions Touch [ ] on the HOME screen. There are some functions which can be Touch [STANDBY]. operated from most screens. Indicators Customize Short-cut buttons on HOME screen Navigation information You can arrange the position of the source icons as you like.
Basic Operations Popup menu Secondary screen • [ ] [ ] : The Secondary screen changes every time you touch it. You can also change the Press the [MENU] button. Secondary screen by flicking left or right on the screen. •...
Basic Operations List screen Navigation Operation There are some common function keys in the For details on the navigation function, please list screens of most sources. refer to the Navigation Instruction Manual. Display the navigation screen Press the [NAV] button. The navigation screen appears.
Page 19
[Where To?]. limit signs and to use safe driving judgment 2 Search for the extra stop. at all times. Garmin and JVC KENWOOD will 3 Touch [Go!]. not be responsible for any traffic fines or 4 Touch [Add to Active Route] to add this citations that you may receive for failing to follow all applicable traffic laws and signs.
Page 20
Displays the navigation and control keys of the current source. • Traffic service is not available in some areas or countries. • Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the traffic information. • You can receive INRIX traffic information and weather forecast by connecting your iPhone or Android smartphone in which the “KENWOOD...
Page 21
SETUP Menu screen appears. installed to this unit. Touch [Navigation]. Preparation • Install the latest version of the KENWOOD Traffic Powered By INRIX application on your iPhone or Android. – iPhone: Search for "KENWOOD Traffic Powered By INRIX" in the Apple App Store to find and install the most current version.
Disc Disc Touch [DISC EJECT]. Playing a disc When removing a disc, pull it horizontally. Ñ Insert a disc Press the [G] button. Press the [G] button. Press the [G] button. DVD/ VCD Basic Operation Most functions can be controlled from the source control screen and playback screen.
Page 23
Disc • VER2: The VCD version is 2. • [Hide]: Hides the control screen. • [ ] : Repeats the current content. Each time Searching area you touch the key, repeat mode switches in Touch to search the next/previous content. the following sequence;...
Disc [MENU CTRL] (DVD only) • [ ] : Randomly plays all tracks in current folder/disc. Each time you touch the key, Touch to display the DVD-VIDEO disc menu random mode switches in the following control screen. See DVD Disc Menu Operation sequence;...
Disc DVD Disc Menu Operation Content list panel Displays the playing list. When you touch a track/ You can set up some items in the DVD-VIDEO file name on the list, playback will start. disc menu. Video screen Touch illustrated area during playback. Searching file area (Video file only) Touch to search the next/previous file.
Disc DVD Setup Switches the subtitle language Touch [Subtitle]. Each time you touch this key, language is switched. You can set up the DVD playback functions. Switches the audio language Touch illustrated area during playback. Touch [Audio]. Each time you touch this key, language is switched.
USB/SD card USB/SD card Screen Ratio Sets the screen display mode. 16:9 (Default): Displays wide pictures. 4:3 LB: Displays wide pictures in the Letter Connecting a USB device Box format (having black stripes at the top and bottom of screen). Connect the USB device with the USB 4:3 PS: Displays wide pictures in the Pan &...
USB/SD card Ñ Inserting the SD card Remove the SD card Press the [G] button. Press the [G] button. Touch [OPEN] to the panel fully opens. Push the SD card until it clicks and then remove your finger from the card. The card pops up so that you can pull it out with your fingers.
Page 29
USB/SD card Content list panel Content list Touch on the right side of the screen to display the Content list. Touch again to close the list. Indicator Items • VIDEO: Identifies the video file. • MUSIC: Identifies the music file. Artwork/ Play mode indicator/ Playing time ] / [...
USB/SD card Ñ Search Operation Link search You can search a file of same artist/album/ You can search music or video files by the genre as the current track. following operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
(P.83) NOTE • Latest compatible list of iPod/iPhone. For details, Press the [HOME] button. see www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with Touch [ an optional accessory iPod connection cable KCA-iP103, you can supply power to your iPod/ Touch [iPod].
iPod/iPhone Touch [AV]. [Function bar AV screen appears. • 1] : Searches track/file. For details on search operation, see Search Operation (P.33). Touch [iPod Bluetooth Connection]. • E] [F] : Searches the previous/next track/ Bluetooth (Default): Output sound using a file.
iPod/iPhone Ñ Search Operation Link search You can search a file of same artist/album/ You can search music files by the following genre/composer as the current track. operations. Touch [Link Search]. Touch [1]. Touch the desired tag type. You can select Touch [S].
Ñ Preparation Touch [HDMI Mirroring]. (P.14) Touch [Agree]. Preparation • Install the latest version of the KENWOOD Smartphone Control application on your Android. Search for “KENWOOD Smartphone Control” in Google play to find and install the most current version. For details, see web site. http://www.kenwood.
CarPlay takes the things Preparation you want to do with iPhone while driving and • Install the latest version of the KENWOOD Music displays them on the screen of the product. Control application on your Android.
Page 36
APPS—Android Auto™/Apple CarPlay/Mirroring Ñ Ñ Operation buttons and Use Siri available Apps on the home You can activate Siri. screen of CarPlay Press the [ ] button for 1 second. You can use the Apps of the connected iPhone. The items displayed and the language used Press for 1 second on the screen differ among the connected devices.
APPS—Android Auto™/Apple CarPlay/Mirroring Android Auto™ Operation Android Auto enables you to use functions of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient functions on the Android device while driving. For details about Android Auto, visit https:// Application/information buttons www.android.com/auto/ and https://support.
APPS—Android Auto™/Apple CarPlay/Mirroring Spotify Operation Content information Displays the information of the current content You can listen to the Spotify on this unit by being played. controlling the application installed in the ] / [ ] / [ ] / [ iPhone or Android.
Page 39
APPS—Android Auto™/Apple CarPlay/Mirroring About Spotify® iPhone or iPod touch • Install the latest version of the Spotify application on your iPhone or iPod touch. (Search for “Spotify” in the Apple App Store to find and install the most recent version.) Android™...
Radio Radio Radio Basic Operation Function bar • [E] [F] : Tunes in a station. The method of Most functions can be controlled from the frequency switching can be changed (see 2 source control screen. in table). To enter Radio source, touch [Radio] icon in •...
Radio Ñ Function panel Memory Operation Touch on the left side of the screen. Ñ Auto memory You can store stations with good reception in memory automatically. Touch desired band key. The functions of each key are as follows. Touch on the left side of the screen. TI] (FM only) Touch [AME].
Radio Selecting Operation Traffic Information (FM only) You can listen and watch the traffic Ñ Search by program type information automatically when a traffic (FM only) bulletin starts. However, this feature requires a Radio Broadcast Data System that includes the You can tune to a station with a specific TI information.
Tuner Setup DNX5170DABS/ DNX317DABS) You can set tuner related parameters. Touch on the left side of the screen. DAB Basic Operation Touch [SETUP]. Most functions can be controlled from the source control screen. To enter DAB source, touch [DAB] icon in the source selection screen.
Page 44
Ñ Function panel [AUTO1] / [AUTO2] / [MANUAL] Switches the seek mode in the following Touch on the left side of the screen. sequence; [AUTO1], [AUTO2], [MANUAL]. • [AUTO1]: Tunes in a ensemble with good reception automatically. • [AUTO2]: Tunes in ensemble in memory one after another.
Storing Service in Preset Touch [Search]. Memory You can store the current receiving service in memory. Select a service you wish to store in memory. Touch on the right side of the screen. You can search a station of the selected program type.
Traffic Information Replay You can listen and watch the traffic You can replay last 30 minutes of current information automatically when a traffic station. bulletin starts. However, this feature requires a Touch on the left side of the screen. Digital Radio that includes the TI information. Touch [Instant Replay].
DAB Setup [Related Service] When you select ON, the unit switches to a related service (if exists) when a DAB service You can set Digital Radio related parameters. network is not available. Touch on the left side of the screen. Default is “OFF”.
• For the cell-phones verified for compatibility, device. access the following URL: • This unit may not work for some Bluetooth http://www.kenwood.com/cs/ce/bt/. devices. • The units supporting the Bluetooth function have • Connecting conditions may vary depending on been certified for conformity with the Bluetooth your environment.
Bluetooth Control Register from the Bluetooth Step 2: Connection settings • When the HFP profile is supported, Hands Free unit 1 or 2 is automatically selected for connection, proceeding to the next step. It is necessary to register the Bluetooth audio •...
Bluetooth Control Bluetooth Setup Step 3: Phonebook transfer Select if you want to transfer your phonebook data. Press the [MENU] button. This message appears if the device Popup menu appears. supports PBAP. Touch [SETUP]. SETUP Menu screen appears. Touch [Bluetooth]. The phonebook data transmission starts.
Page 51
Bluetooth Control Touch the device name you want to To delete the registered Bluetooth unit connect. Touch [Delete]. Profile select screen appears. Touch the device name to check. NOTE • If the icon is lighted, it means that the unit will use that device.
Bluetooth Control Ñ Change the PIN code Playing Bluetooth Audio Device Touch [PIN Code] in the Bluetooth SETUP screen. Most function can be controlled from the PIN Code Set screen appears. source control screen. To enter Bluetooth source, touch [Bluetooth] Input the PIN code.
Page 53
Bluetooth Control Touch the device name you want to Function panel connect. Touch on the left side of the screen to display the function panel. Touch again to close the panel. • BT DEVICE CHANGE] : Selects the device to connect via Bluetooth audio (A2DP) or APP (SPP).
Bluetooth Control Using Hands-Free Unit Select the cell-phone to use When you connect two cell-phones You can use telephone function by connecting 1) Touch [ ] to select the phone the Bluetooth telephone to this unit. you want to use. Bluetooth SETUP NOTE 1) Touch [...
Page 55
Bluetooth Control Call using the preset number Select the phone number from the list. Touch [ Touch the Name or phone number. NOTE • You can set the list to arrange in the order of last name or first name. For details, see Hands-Free Setup (P.58).
Page 56
Bluetooth Control Ñ Receive a call Adjust the receiver volume Press the [S] or [R] button. Touch [ ] to answer a phone call or ] to reject an incoming call. Turn to the right to increase, and turn to the left to decrease.
Page 57
Bluetooth Control Ñ Ñ Phone number preset Phonebook transfer You can register frequently used phone You can transfer the phonebook in your numbers to this unit. Bluetooth smartphone via PBAP. Touch [ Touch [ Touch [Edit]. Touch [ The phonebook data transmission starts. Phonebook deletion Select where to preset.
Bluetooth Control Hands-Free Setup Auto Response* Sets an automatic response time to pick-up an incoming call. You can perform various setup about OFF (Default): Automatic response is not handsfree function. available. Press the [MENU] button. 1/ 5/ 10/ 15/ 20/ 25/ 30: Set calling ring Popup menu appears.
Other External Components Other External Components View Camera Switching the Angle Touching each time changes camera angles: Available when [Dashboard Camera / NOTE Front Camera] is set to [CMOS 3-Series • To connect a camera, see P.81. Camera]. • To use a rear view camera, a REVERSE lead •...
Page 60
Other External Components To adjust the parking guidelines R-CAM Settings ( If you select [CMOS 3-Series Camera] for NOTE [Rear Camera], adjusts the CMOS-3xx series • Install the rear view camera in the appropriate with ID 1 set. For details, see the instruction position according to the instructions supplied manual of your camera.
Other External Components Use Dashboard Camera External audio/video players— AV-IN A Dashboard Camera, DRV-N520 (optional Connect an external component to the accessory), connected to this unit lets you play AV-IN input terminal. (P.81) video-recorded data and so on. For details, see the instruction manual of Select [AV-IN] as the source.
Setting Up Setting Up TV tuner ( You can connect the TV tuner (commercially Monitor Screen Setup available) with this unit and watch TV. Preparation You can adjust image quality in video, menu • When you use TV control function, connect the screen, etc.
Displays the vehicle information. • Set up camera (P.59) This function requires a commercial adaptor. • Set up special (P.65) Consult your KENWOOD dealer for details. • Set up Bluetooth (P.50) Beep for Parking distance control* • Set up security (P.11) Sets whether to generate a warning tone •...
Page 64
“Left”/ “Right” (Default) Touch [Time Zone] in the User Interface screen. This function requires a commercial adaptor. Consult your KENWOOD dealer for details. Select the time zone. Language Select Mode Touch [Clock Adjust] in the User Interface Selects the mode to select a language.
Setting Up Special Setup Initialize Touch [Initialize] and then touch [Yes] to set all the settings to the initial default settings. You can setup Special parameters. • Audio SETUP Memory is not initialized. Press the [MENU] button. Ñ Popup menu appears. Software Information Touch [SETUP].
Setting Up Ñ Display Setup Customizing the key color You can set the button illumination color. Press the [MENU] button. Touch [Key Color] in the Display screen. Popup menu appears. Touch the desired color. Touch [SETUP]. SETUP screen appears. Touch [Display]. Display screen appears.
Page 67
Setting Up Ñ Change background image or To register original image color You can load an image from the connected USB device and set it for the background image. Touch [Background] in the Display screen. Before operating this procedure, it is necessary Select an image.
Controlling Audio Controlling Audio AV Setup You can set AV parameters. NOTICE Press the [MENU] button. Popup menu appears. • Each operation in this section can be started from the multi function menu. Touch [SETUP]. SETUP screen appears. You can adjust the various settings such as audio balance or subwoofer level.
Controlling Audio Speaker/ X’over setup Location (Only for Front, Rear) Select the speaker position you have fixed. Tweeter (Only for Front) Press the [MENU] button. Popup menu appears. You can set the tweeter when you are selecting front speakers. Touch [Audio]. None, Small, Medium, Large Audio screen appears.
Page 70
Controlling Audio Set each item as follows. FREQ (High Pass) High Pass Filter adjustment. (When tweeter is selected on Speaker Select screen) HPF FREQ, LPF FREQ (Band Pass) Band Pass Filter adjustment. (When mid range speaker is selected on Speaker Select screen) FREQ (Low Pass) Low Pass Filter adjustment.
Controlling Audio Select the crossover network mode. Fader / Balance Adjust the volume balance around the touched area. [C] and [D] adjust the right and left volume balance. [R] and [S] adjust the front and rear volume balance. [Center] Clear the adjustment. A confirmation screen appears.
Controlling Audio Volume Offset Initialize The current EQ curve returns to flat. Finely adjust the volume of the current source ALL SRC to minimize the difference in volume between Apply the adjusted equalizer to all sources. different sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.
Controlling Audio Zone Control NOTE • When the rear speaker sound is switched, the You can select different sources for both front audio source that is output at the AV OUTPUT and rear positions in the vehicle. terminal is also switched to the same source. •...
Controlling Audio Ñ Listening Position Drive Equalizer+ The sound quality is automatically optimized Adjust the sound delay time as nearer speakers to meet the current car speed by GPS. to the selected seat have more delay time, “OFF”, “ON” so that the sound from each speaker arrive a Space Enhancer listener at the same time.
Page 75
Controlling Audio Ñ Front Focus fine adjustment Touch [T] or [U] to adjust the sound level of the selected speaker. Touch [Adjust]. Touch [Delay]. Set each item as follows. NOTE • To return to the initial setting of Delay and Level, touch [Initialize] and [YES] in the confirmation screen.
Connection/Installation Connection/Installation Before Installation ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be Before installation of this unit, please note the drained. following precautions. •...
(Black 1 m) (3.5 m) (Gray 1 m) Bend the tabs of the mounting sleeve (3 m) with a screwdriver or similar utensil and attach it in place. Ñ Trim plate 1) Attach accessory 6 to the unit. only DNX8170DABS only English...
Page 78
Connection/Installation Ñ GPS antenna 5) Adjust the direction of the microphone (accessory 4) to the driver. GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals.
Page 79
Connection/Installation Ñ Ñ Removing the unit 3 way speaker system setup 1) Remove the trim plate by referring to step 1 in "Removing the trim plate". 2) Insert the two extraction key (accessory 5) deeply into the slots on each side, as shown. Subwoofer Preout Mid Range Preout 3) Lower the extraction key toward the bottom,...
Page 80
Connection/Installation Ñ Connecting wires to terminals A: Black (Ground wire) Fuse (15A) B: Yellow (Battery wire) C: Red (Ignition wire) Connector A Connector B Accessory 1 If no connections are made, do not let the cable come out from the tab. Light Blue/Yellow (Steering remote control wire) To steering remote...
Page 81
Connection/Installation Ñ Ñ Connecting the system and Wiring harness (Accessory 1) external components connector function guide Color and function Yellow Battery Blue/White Power Control Orange/White Dimmer Ignition (ACC) Black Earth (Ground) Connection B-1/ B-2 Purple (+) / Purple/Black (–) Rear Right B-3/ B-4 Gray (+) / Gray/Black (–) Front Right B-5/ B-6 White (+) / White/Black (–)
Page 82
Wireless Display Adapter: KCA-WL100 Accessory 4: Bluetooth Microphone (Sold separately) Connect to vehicle’s steering remote harness. Contact your KENWOOD dealer for details. Rear view camera input (Yellow) Front view camera/ Dashboard camera input (Yellow) only) Visual Output (Yellow) Ñ...
Page 83
Connection/Installation Ñ Ñ Connecting an iPod/iPhone Connecting an Android smartphone Lightning connector Android smartphone KCA-iP103 (0.8m) Lightning Digital AV (with Android Auto) [2][6] Adapter Micro USB to USB cable iPod/iPhone KCA-HD100 Accessory 3 (Gray) (1 m) (1.8 m) Accessory 2 (Black) (1 m) KCA-iP103 (0.8m) Accessory 3 (Gray) (1 m) Accessory 2 (Black) (1 m)
Troubleshooting Ñ Troubleshooting Connecting a Dashboard camera Front view camera/ Dashboard Problems and Solutions camera input (Yellow) DRV-N520 only) If any trouble occurs, first check the following table for possible problems. Visual (Yellow) NOTE • Some functions of this unit may be disabled by some settings made on this unit.
Navigation Error. Please turn on power again later. Eject the disc and try inserting it again. Contact the The communication error has occurred due to severely KENWOOD dealer if this indicator continues blinking cold temperature. or the disc cannot be ejected.
Appendix Appendix Playable Media and Files You can play various kinds of media and files on this unit. Ñ List of playable discs Disc types / Standard Support Remark DVD Video DVD Audio × DVD-VR × DVD-R* • MP3/ WMA/ AAC/ WAV/ FLAC/ Vorbis/ MPEG1/ MPEG2/ MPEG4/ H.264/ WMV/ MKV playback •...
Page 87
Appendix Ñ About files The following audio, video, and picture files are supported. Playable Audio files Format Bit rate Sampling frequency Bit count AAC-LC (.m4a) MPEG2/4 AAC LC 8 – 320kbps, VBR 16 – 48 kHz 16 bit HE-AAC(V1,V2) MP3 (.mp3) MPEG 1/2 Audio Layer 3 8 –...
Appendix Region Codes in the World The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Operation regulatory marks With this DVD, some functions of this unit such as the play function may be restricted depending on the location where the DVD is Indicates a region number.
Appendix DVD Language Codes Code Language Code Language Code Language Afar Interlingua Kirundi Abkhazian Interlingue Romanian Afrikaans Inupiak Russian Amharic Indonesian Kinyarwanda Arabic Icelandic Sanskrit Assamese Italian Sindhi Aymara Japanese Sangho Azerbaijani Javanese Serbo-Croatian Bashkir Georgian Singhalese Byelorussian Kazakh Slovak Bulgarian Greenlandic Slovenian...
Appendix Specifications USB interface section USB Standard Monitor section : USB 2.0 High Speed File System Picture Size : FAT 16/ 32, exFAT, NTFS : 6.95 inches (diagonal) wide Maximum Power Supply Current : 156.6 mm (W) × 81.6 mm (H) : DC 5 V 1.5 A ×...
Page 91
Appendix Bluetooth section Position Front / Rear /Subwoofer Delay Technology : 0 – 6.1 m (0.01 m Step) : Bluetooth Ver.3.0 Gain Frequency : -8 – 0 dB : 2.402 – 2.480 GHz Subwoofer level Output Power : -50 – +10 dB : +4dBm (MAX), 0dBm (AVE), Power Class2 DAB section ( Maximum Communication range...
Page 92
Appendix Video section Navigation section Color System of External Video Input Receiver : NTSC/PAL : High-sensitivity GPS receiver External Video Input Level (mini jack) Reception Frequency : 1 Vp-p/ 75 Ω : 1575.42 MHz (C/A code) External Audio Max Input Level (mini jack) Acquisition Times : 2 V/ 25 kΩ...
(“AVC VIDEO”) AND/OR (¡¡)DECODE AVC VIDEO trademarks owned by Bluetooth SIG, Inc. and any THAT WAS ENCODED BY A CONSUMER ENGAGED use of such marks by JVC KENWOOD Corporation is IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED under license. Other trademarks and trade names are FROM A VIDEO PROVIDER LICENSED TO PROVIDE those of their respective owners.
Page 94
Appendix • libFLAC DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2 OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 007,2008,2009 Josh Coalson NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE Redistribution and use in source and binary forms, GOODS OR SERVICES; LOSS OF USE, DATA, OR with or without modification, are permitted provided PROFITS;...
Page 95
Français Contact your local authority for details in locating a Par la présente, JVC KENWOOD déclare que l’ é quipement radio recycle facility nearest to you. DNX8170DABS/ DNX7170DABS/ DNX5170DABS/ DNX5170BTS/ Proper recycling and waste disposal will help conserve DNX317DABS/ DNX317BTS est conforme à...
Page 96
Latviešu Spole nost JVC KENWOOD tímto prohla uje, e rádiové za ízení DNX8170DABS/ DNX7170DABS/ DNX5170DABS/ DNX5170BTS/ JVC KENWOOD ar o deklar , ka radio aparat ra DNX8170DABS/ DNX317DABS/ DNX317BTS spl uje podmínky sm rnice 2014/53/EU. DNX7170DABS/ DNX5170DABS/ DNX5170BTS/ DNX317DABS/ Pln text EU prohlá ení o shod je dostupn na následující internetové...
Remote control Remote control This unit can be operated using the remote Battery Installation control KNA-RCDV331 (optional accessory). If the remote control operates only over # CAUTION shorter distances or does not operate at all, it is possible that the batteries are depleted. •...
Remote control Ñ Functions of the Remote Direct search mode control Buttons Using the remote control, you can jump directly to the desired file, track chapter, etc. with entering the number corresponding to Ñ Switch the operation mode the content. The functions operated from the remote NOTE control differ depending on the position of the...
Page 100
Remote control Mode Function Name switch Switches to the source to be played. In hands-free mode, hangs up the phone. − Switches between the navigation and the source screens. MENU Stops playing and memorizes the last point where the disc stopped. The last point is deleted by pressing twice.
Page 101
Remote control Mode Function Name switch VOICE Displays the control screen of current source. (USB, SD, iPod, DISC) Displays the DVD menu. Turns the playback control on or off while playing VCD. Speaks the voice guidance. VIEW AUD, DVD Switches the AV source to be output. Switches between 2D and 3D map displays.