Using The Stereo Adapter - Silvercrest BTST-9300 Owner's Manual & Service Information

Once you have successfully paired the headphones and the stereo adapter, you only need to

connect or disconnect them when you want to use them.

Disconnecting the stereo adapter from the headphones

To disconnect the Bluetooth connection between both devices, press and hold the control

button on the stereo adapter for approx. one or two seconds. The audio connection gets lost

and the blinking frequency of the blue indicator will change from 3 short to 1 short light. The

device is now in idle mode.

Powering the stereo adapter off

In order to power the stereo adapter off after it has been disconnected, press and hold the

control button for approx. four to five seconds. The red indicator on the stereo adapter will

blink 4 times shortly to confirm and the device powers off.

Powering the stereo adapter on

Press and hold the control button for approx. four to five seconds until the blue indicator lights

up to indicate idle mode.

Establishing a connection to the headphones

After the blue indicator on the stereo adapter indicates idle mode, you can establish a

connection with the paired headphones by pressing the control button once. This process may

take a few seconds.

12