Ps591 Hardware Specifications - Toshiba V Series User Manual
Integrated controller, loop controller
Hide thumbs
Also See for V Series:
- Manual (264 pages) ,
- User manual (258 pages) ,
- Operation manual (126 pages)
Table of Contents
A.9 PS591 Hardware Specifications
Environmental
conditions
Input
Output
Accessories
Casing
Note 1: The rated output current is 2 A, 24 VDC, maximum.
Note 2: When a maximum output load, capacitive, for example, is applied, the power
6F8C1005
Table A-20 PS591 Hardware Specifications
Item
Operating ambient
0 to 55
temperature
Storage temperature
-25 to 70
Relative humidity
10% to 90% (with no condensation)
Dust concentration
0.3 mg/m
Corrosion resistance
No corrosive gas shall be present.
Vibration resistance
9.8m/S
Impact resistance
40G or less
Altitude
2000 m or lower
Rated voltage
100 VAC/240 VAC (85 to 132 VAC, 187 to 264 VAC)
Power consumption
About 140 VA
Rated frequency
50/60 Hz (47 to 63 Hz)
Retentive power
Normal operation on 0.5 cycle at 1-second intervals
interruption
Rush current
25 A peak or lower (after instantaneous power failure of
5 seconds or longer)
Grounding current
1.5 mA or less
Insulation resistance
50 MΩ or higher as measured with a 500 VDC megger
(between batch input and each insulated part)
Withstand voltage
1500 VAC/minute (between batch input and each
insulated part)
Grounding
Exclusive Class-D grounding
Output
24 VDC, 2A max.
Max. ripple voltage
200mV
Overvoltage protection Provided
Overcurrent protection Provided
Status indicator
POWER (24 V output, green)
Fuse
240 V - 2A
Hot swap
Not possible
Weight
About 600 g
160H × 400W × 110D (including the terminal block)
Dimensions
Material
Iron plate case, Panel: Resin mold
External line terminal
8 terminals - M3 screw terminals
block
Output current changes depending on the input voltage and ambient
temperature.
• 100 VAC input
The maximum output current is 2 A at an ambient temperature is 35
If the ambient temperature increases by 10
10% (0.2A) is required.
The aluminum electrolytic capacitor used in this unit has a limited life, lasting
about 10 years at an ambient temperature of 35
• 240 VAC input
The maximum output current is 2 A at an ambient temperature is 30
If the ambient temperature increases by 10
10% (0.2A) is required.
The aluminum electrolytic capacitor used in this unit has a limited life, lasting
about 10 years at an ambient temperature of 30
unit may not be able to be activated.
It is recommended that this unit be used with an allowance of 10% or more in
terms of maximum output load.
A.9 PS591 Hardware Specifications
Specifications
o
C
o
C
3
or less
2
(5 to 33Hz, 15 minutes), X, Y and Z
P-P
o
C, reduction of output current by
o
C.
o
C, reduction of output current by
o
C.
Remarks
A
See Notes.
o
C.
o
C.
117
- Quick Links:
- Cpu Module L1Pu11H
Hide quick links:
Table of Contents
