Table of Contents
2.5
Additional functions
Output limit setting
This function enables the user to set the high/low output limit for digital inputs.
When the output limit function is set, if the set value of high limit value is more than the
user defined digital value, the analog output value is the high limit value. And, if the user
defined digital input is smaller than the low limit value, the analog output value is low
limit value.
Output limit: Disable/Enable
•
High limit value: -192~16191 (Actual range is from low limit value to 16191.)
•
Low limit value: -192~16191 (Actual range is from -192 to low limit value.)
•
Perform the following steps for I/O parameter setting.
Step
1
On the Project Window of SoftMaster, click I/O Parameters.
The I/O Parameter Setting window displays.
2
On the I/O Parameters Setting window, click the module area of the
concerned slot to select the applicable module.
Click the arrow button on the Module cell, to display the modules. Select the
applicable module.
3
Double-click the 2MLF-DC4S module.
The module's I/O Parameter Settings window displays.
R200
Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide
September 2010
Action
Honeywell
2. Specifications
2.5. Additional functions
37
Table of Contents
