Programming Stay Mode 2 Bypass Zones - Bosch Solution 2000 User Manual

14

en | Operation with ICON LCD Codepad

5.1.5

Programming zones to be automatically isolated in STAY Mode 2 are only carried out if you

have a Master Code or Installer Code.

How to Program STAY Mode 2 Zones

1.

2.

3.

5.2

Disarming the System

When you enter the premises after the system is armed in AWAY mode, or if you armed the

system in STAY Mode 1 or STAY Mode 2, you must disarm the system to disable detection

devices that activate an alarm.

If there was an alarm condition prior to disarming the system, a flashing zone indicator

displays, indicating a previous alarm on that zone.

How to Disarm the System

Enter your user code followed by the [#] button (for example, [2580#]). Two beeps sound.

5.3

Arming/Disarming Areas

The control panel can be partitioned into two individual areas. User codes with authority levels

can arm/disarm each area or both areas from the area codepads.

This feature is only applicable if your installer assigned the zones, codepads,and user codes to

Area 1 , Area 2 or both areas.

How to arm both areas in AWAY Mode

This feature is only applicable if your installer programmed the user codes allowed to arm/

disarm both areas at same time.

Enter your user code followed by [0] and the [#] button ( for example, [25800#]). Two beeps

sound and the AWAY indicator displays. Exit Time starts counting.

How to disarm both areas

Enter your user code followed by [0] and the [#] button ( for example, [25800#]). Two beeps

sound and the AWAY indicator extinguishes.

How to arm Area 1 or Area 2 in AWAY Mode

Enter your user code followed by [0][1] and the [#] button ( for example, [258001#]) to arm

Area 1; or enter your user code followed by [0][2] and the [#] button ( for example,

[258002#]) to arm Area 2. Two beeps sound and the AWAY indicator displays. Exit Time starts

counting.

How to disarm Area 1 or Area 2 in AWAY Mode

Enter your user code followed by [0][1] and the [#] button ( for example, [258001#]) to

disarm Area 1; or enter your user code followed by [0][2] and the [#] button ( for example,

[258002#]) to disarm Area 2. Two beeps sound and the AWAY indicator extinguishes.

2017.09 | 04 | F.01U.298.028

Enter your Master Code or Installer Code, followed by [4] and the [#] button (for

example, followed [25804#]). Three beeps sound and the STAY indicator flashes.

Enter the zone number to be automatically isolated, followed by the [*] button (for

example, [1*] = Zone 1, [2*] = Zone 2). The selected zone flashes. If you make a mistake,

enter the same zone number followed by the [#] button to clear the incorrect zone. To

select additional zones to be automatically isolated in STAY Mode 2, repeat Step 2 as

many times as required.

Press the [#] button to exit this mode when you finish selecting all zones to be

automatically isolated in STAY Mode 2. Two beeps sound and the STAY and AWAY

indicators turn off.

User's Guide

Control Panel

Bosch Security Systems, Inc.