Index Page General safety instructions 1. Description 2. Preparations 3. “i-Temp” function 4. “antiShine” function 5. Setting the temperature and steam amount 6. Ironing without steam 7. Vertical steam 8. Energy saving “eco” button 9. Auto shut-off 10. Fabric protection soleplate cover 11.
Online guarantee You can download this manual from registration. the local homepages of Bosch. General safety instructions ❐ The iron must not be left unattended while it is connected to the supply mains. ❐ Remove the plug from the socket before filling the appliance with water or before pouring out the remaining water after use.
Page 5
CAUTION. Hot surface. ❐ Surface is liable to get hot during use. ❐ This appliance is designed only for household use up to 2000m above sea level. • Carefully read through the operating • The appliance must never be placed instructions for the appliance and directly under the tap to fill the water safeguard them for future reference.
Description 1. Water tank 9. Mains cable with storage facility 2. Removable iron pad 10. Steam hose 3. Energy saving “eco” button (green) 11. Iron fixation system “SecureLock” 4. “Steam ready” / “Auto shut-off” pilot 12. “Calc’n’Clean Advanced” scale light* collector * 5.
8. This appliance has a built-in water Preparations level sensor. The “refill water tank” indicator (6) will light when the water tank is empty. Important: • Normal tap water can be used. To prolong the optimum steam function, mix tap water with distilled water 1:1.
Setting the “i-Temp” function temperature and steam amount (Model dependent) This steam station has a unique 1. Check the ironing instruction label on “i-Temp” function. If this function is the garment to determine the correct selected, an appropriate combination ironing temperature. of temperature and steam is set, which 2.
Therefore, it is advisable to try the Ironing without iron on the ironing board or a piece of steam cloth to start with. • For better ironing results, iron the 1. Select an appropriate temperature for last strokes without steam to dry the the type of material being ironed garment.
Energy saving Fabric protection “eco” button soleplate cover If the “Energy saving” button (3) is (Model dependent) switched on, you can save up to 25% of the energy and 40% of the water consumption (*), and still achieve good results when ironing most of your garments.
1. Check carefully that the appliance is Calc’n’Clean cold and unplugged for more than 2 Advanced hours, and that the water tank (1) is empty. 2. Fix the iron to the stand by inserting ~ 2 h. the tip of the iron into the front slot ºC and moving the fixation lever (11) against the heel of the iron.
Automatic clean warning 4. If the cloth is synthetic, it may melt due to the high temperature on the (Model dependent) soleplate (16). Switch off the steam Pilot light (6) will flash indicating that and rub off any residue immediately boiler must be rinsed.
2. Always allow the appliance to cool Tips to help you down before storing it. save energy 3. Place the iron on the iron pad (2), standing on the soleplate, and fix it Steam production consumes the most by inserting the tip of the iron into the energy.
Trouble shooting Problem Possible causes Solution Pilot light (6) • Boiler must be rinsed. • Rinse the boiler according to flashes. the cleaning instructions in this manual. The steam • There is a connection • Check the mains cable (9), the generator problem.
Page 15
Problem Possible causes Solution The ironed • The selected temperature • Select a suitable temperature garment turns is too high and has for the material being ironed and dark and/or damaged the garment. clean the soleplate with a damp sticks to the cloth.
Page 16
Customer Service Great Britain Bosch Customer Service UK +44 (0)344 892 8979 Grand Union House IRL +353 (0)1450 2655 Old Wolverton Road Milton Keynes www.bosch-home.co.uk MK12 5PT 002 DS37 i-Temp GB 03/15...