1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. FI-4860C2
  6. Cleaning instructions

Fujitsu fi-4860C2 Cleaning Instructions

Hide thumbs Also See for fi-4860C2:
1
2

Quick Links

See also: Operator's Manual, Installation Manual
C l e a n i n g I n s t r u c t i o n s f o r f i - 4 8 6 0 C 2 S c a n n e r
Cleaning the
1
Pull the ADF release lever towards you
and lift up the ADF upper sheet guide.
Guide Plate
Cleaning the Pick
1
While pulling the ADF lever towards you, lift
up the ADF upper sheet guide.
ADF Upper Sheet Guide
Guide Plate
Cleaning the Brake
1
While pulling the ADF lever towards you, lift
up the ADF upper sheet guide.
ADF Upper Sheet Guide
Guide Plate
* May be extended to 50,000 depending on paper type and condition
BEFORE CLEANING
Remove documents from
the stacker. Pull up the
lever on the right front of
the upper transport and
raise it
.
Pad—Recommended Cleaning Cycle Every 10,000* Sheets
2
Press down on the upper part of the
guide plate with your fingers at the two
positions shown, rotate the plate towards you
Pad Assy
and remove it.
Roller—Recommended Cleaning Cycle Every 10,000* Sheets
2
Slide the Pick Roller unit to the left to
disengage the clutch ring from the shaft.
Ring
Shaft
Rollers—Recommended Cleaning Cycle Every 10,000* Sheets
2
Press down on the upper part of the guide
plate with your fingers pull the plate towards
you to remove.
Guide Plate
.
Consumables
Consumable Kit
Cleaning Kit
3
Wipe the translucent rubber part of the pad
ASSY using cleaning paper moistened with
cleaner F1.
Guide
Plate
3
Wipe both Pick Rollers (2 positions) and
the Separation Roller using cleaning paper
moistened with F1cleaner.
Pick Roller Unit
3
Lift the bail of the Brake Roller upwards
and release the lock. Pull the Brake Roller
forward to remove it. Wipe roller
Pad Assy
surface using cleaning paper
moistened with cleaner F1.
Brake Roller
Part Number
CON-4315-008A
SC-CLE-HV
Pad (Cleaning Area)
Separation Roller
Pad
Assy
Ring
Pick Roller
Unit
Ball
loading

Related Manuals for Fujitsu fi-4860C2

Summary of Contents for Fujitsu fi-4860C2

  • Page 1 C l e a n i n g I n s t r u c t i o n s f o r f i - 4 8 6 0 C 2 S c a n n e r Consumables Part Number BEFORE CLEANING CON-4315-008A...
  • Page 2 Cleaning Instructions for fi-4860C2 Scanner PFU Imaging Solutions Europe Ltd Cleaning the Feed Rollers and Pinch Rollers—Recommended Cleaning Cycle Every 10,000* Sheets Wipe the metal feed rollers and pinch rollers using a lint free cloth moistened with cleaner F2. Wipe the rollers thoroughly. If the rollers have black...