Page 1
Cutting edge design, professional grade materials and components, simple operation and superior assembly quality - RCA Communications Systems Products have it all, including our exclusive, no-nonsense, three-year “Warranty Protection Program,” one of the most comprehensive warranties in the communications industry.
Only use RCA approved accessories this radio. For a warranty. complete list of RCA approved antennas, batteries, » Turn radio off when near electrical blasting chargers, holsters and audio accessories, visit: caps to avoid possible interference with www.RCACommunicationsSystems.com...
BR200 B2017LI immediately to your RCA Communications Systems Handheld Radio Li-Ion Battery (1700mAh) Sales and Service Center. Every BR200 radio comes with the following items: Item Qty.
Your radio is powered by a Lithium-Ion (Li-lon) battery. To avoid damage and comply with warranty terms, charge the battery using only an original RCA charger, exactly as described in the charger user guide. Insert the battery or the radio to be charged into the charger slot.
Connecting External Accessories The accessory connector is located on the side of the Turn Radio On/Off radio. It is used to connect RCA audio accessories Rotate the On/Off/Volume Control Knob clockwise to the radio. Be sure the accessory plug is properly until you hear a click.
If your radio does not power up, check your battery and. make sure it is charged and properly attached. If your radio still does not power up, contact your RCA Communications Systems dealer. Adjusting the Volume...
Professional Two-Way Radio Instruction Manual PROGRAMMABLE BUTTONS Receive a Call Release the PTT button and adjust the volume so Your RCA Communications Systems Dealer can set you can hear inbound calls. the programmable buttons as shortcuts to radio functions or preset channels/groups depending on...
The radio automatically exits Battery Save Mode when a call is received or a transmission Low Battery Warning is made. Ask your RCA Communications Systems A Low Battery Warning tone sounds and the LED Dealer about the different battery saving modes flashes when battery power goes below a preset that are available to increase battery active time.
The radio will stay on the priority channel and hold the button programmed as “Temporarily until the signals stop. Your RCA Communications Delete Noise Channel.” This will remove the channel Systems Dealer can program the time between the until the radio is turned off.
2. After the alarm tone, if the transmission • CTCSS/DCS signaling may not be continues past than the preset time limit, the identical. Please talk to your RCA Cannot talk to TOT will be activated, which prevents the radio Communications Systems dealer or hear other from transmitting.
Authorized RCA not responsible for any ancillary equipment which Communications Systems Sales and Service Center. is attached to or used in conjunction with RCA RCA Communications Systems will be responsible Communications Systems products. for all charges in returning the product to the end RCA Communications Systems offers to the original user via standard ground shipping service.
Page 27
TO USE THE PRODUCT. liquid damage, damaged screen, deep scratches, RCA Communications Systems endeavors to achieve bent or broken body or frame, damaged channel the accuracy and completeness of this manual, but...
Operating Instructions: the expressed, written permission from RCA Transmit no more than the rated duty factor of Communications Systems. 50% of the time. To transmit (talk), push the Push- The end-user of any two-way radio is solely responsible To-Talk (PTT) button.
Page 29
RF exposure decrease when increasing distance from the antenna. Use only RCA Communications Systems approved supplied or replacement antennas, batteries, and accessories. Using non-RCA antennas, batteries, and accessories may exceed the FCC RF exposure guidelines and is not recommended.