Table of Contents
Quick Links
Table of Contents
Related Manuals for Fujitsu ESPRIMO P7XX
Summary of Contents for Fujitsu ESPRIMO P7XX
- Page 1 System Operating Manual ESPRIMO P7XX / P9XX...
- Page 2 Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can receive automatic driver updates from: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2013. All rights reserved. Publication Date 07/2013 Order No.: A26361-K1015-Z320-2-7619, edition 2...
- Page 5 ESPRIMO P7XX / P9XX Operating Manual Your ESPRIMO Ports and operating elements Important notes Getting started Operation Troubleshooting and tips System expansions Technical data Index...
- Page 6 Trademarks Fujitsu, the Fujitsu logo and ESPRIMO are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries. Kensington and MicroSaver are registered trademarks of ACCO World Corporation.
-
Page 7: Table Of Contents
Troubleshooting and tips ............. . 30 Fujitsu... - Page 8 Index ................. . 59 Fujitsu...
-
Page 9: Your Esprimo
Some of the manuals listed can be found in electronic form on the "Drivers & Utilities" DVD. You can access and view the required information using the Acrobat Reader program, which is also included on the DVD. You can of course also print out a copy of the manual if you prefer. Fujitsu... -
Page 10: Validity Of The Reference Manual
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 11: Ports And Operating Elements
5 = Headphone port 2 = Insert/eject button (CD/DVD) (optional) 6 = Microphone jack 3 = Module bay for 3 inch drives 7 = USB ports 4 = ON/OFF switch 8 = Latch with optional casing lock Fujitsu... -
Page 12: Rear
Device with alternating voltage socket, monitor socket and emergency on button 1 = Monitor socket (AC OUT) 4 = Ports for external devices (device-dependent) 2 = Alternating voltage socket (AC IN) 5 = Slot covers 3 = Emergency on button Fujitsu... - Page 13 3 = Ports for external devices (device-dependent) Device with alternating voltage socket and monitor socket 1 = Alternating voltage socket (AC IN) 4 = Slot covers 2 = Monitor socket (AC OUT) 3 = Ports for external devices (device-dependent) Fujitsu...
-
Page 14: Important Notes
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu... -
Page 15: Cleaning The Device
Contact the corresponding government office in the respective country for current information on possible operating restrictions. If your country is not included in the list, then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country. Fujitsu... -
Page 16: Fcc Compliance Statement
• Consult the dealer or an experienced radio/TV technician for help. Fujitsu not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user. -
Page 17: Getting Started
Drives and boards If you have received drives or boards with your device, please do not install them until after first-time setup. How to install drives and boards is described in the "System expansions", Page 35 chapter. Fujitsu... -
Page 18: Setting Up The Device
"Technical data", Page section "Ambient conditions"). Protect the device against dust, humidity and heat. Connecting the machine to the mains Mainsadapter, ► Connect the mains cable to the machine (1). ► Plug the mains plug into a three-pin socket (2). Fujitsu... -
Page 19: Connecting External Devices
Disconnecting cables ► Switch off all affected devices. Cable ► Remove power plugs from the mains outlets for all devices. ► Unplug all data communication cables from the utility sockets. ► Unplug all cables from the device and peripherals. Fujitsu... -
Page 20: Ports On The Device
Mouseport PS/2mouseport Audiooutput Lineout USB - Universal Serial Bus, LAN port black LANport UniversalSerialBus DVI-I monitor port DisplayPort Some of the connected devices require special software (e.g. drivers) (refer to the documentation for the connected device and operating system). Fujitsu... -
Page 21: Connecting A Monitor
► Depending on your device configuration level, plug the monitor power cable into either the monitor socket of the device (1) or a grounded power outlet (2). When you connect the monitor to the monitor socket of the device, it automatically switches off as soon as the device switches off. Fujitsu... -
Page 22: Connecting The Mouse
For an exact description of how to connect external devices to the corresponding port, please refer to the documentation of the external device. Port settings Parallelport Serialport, You can change the port settings (e.g. address, interrupt) in the BIOS Setup. Fujitsu... -
Page 23: Connecting External Devices To The Usb Ports
Plan a reasonable amount of time for this, as this process must not be interrupted. You may need the licence number for Windows during the installation. The licence number is located on a sticker on your device. Fujitsu... -
Page 24: Switching On Monitor And Device
= Device is on ► Switch the device on with the main power switch (1) on the back of the device. ► Press the ON/OFF switch (2) on the front of the device. The ON/OFF switch lights up, the device starts. Fujitsu... -
Page 25: Installing The Software
Help in your operating system. You will find more information on the system, as well as drivers, utilities and updates on the "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You will find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com"... -
Page 26: Operation
After the emergency on button (1) has been pressed for a short time, the device can be switched on again using the ON/OFF switch at the front of the device. ► Press the emergency on button (1) to start the device. Fujitsu... -
Page 27: Switching Off The Device
The main switch and the ON/OFF switch do not disconnect the device from the mains voltage. To completely disconnect from the mains voltage, remove the power plug from the power socket. ► If necessary, switch the monitor off (see the operating manual for the monitor). Fujitsu... -
Page 28: Indicators On The Device
The device is switched off (main power switch at 0 or disconnected from the mains). If the device is ready it can be switched on with the ON/OFF switch. Hard disk indicator The indicator lights up when the hard disk drive of the device is accessed. Fujitsu... -
Page 29: Keyboard
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced Configuration and Power Management Interface). Otherwise the key is inoperative. The mainboard must support this function. Keys, Keys, Keys, Enter key confirms the highlighted selection. The Enter key is also referred to as the "Return" key. Fujitsu... -
Page 30: Settings In Bios Setup
In BIOS Setup, you can set the system functions and the hardware configuration of the device. When the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for the mainboard). You can customise these settings to your requirements in the BIOS Setup. Fujitsu... -
Page 31: Property And Data Protection
Consult the manual for your Kensington Lock. Lead-sealing To prevent unauthorised persons from opening the casing, the casing can be lead-sealed. To do this, feed the sealing chain through the holes (1) and seal the chain with the lead seal. Fujitsu... -
Page 32: Mechanical Casing Lock (Optional)
Key turned towards the closed lock: The device is locked. • Key turned towards the open lock: The device is unlocked. Locking the casing ► Turn the key towards the closed lock. Unlocking the casing ► Turn the key towards the open lock. Fujitsu... -
Page 33: Bios Setup Security Functions
Operation is not permitted in Taiwan. ► Connect the external SmartCard reader to your system as described in the instructions for the SmartCard reader. SmartCard reader, After the device is switched on, you will be prompted to insert your SmartCard. Fujitsu... -
Page 34: Troubleshooting And Tips
► For further clarification of the problem, contact the Service Desk for your country (see the Service Desk list or visit the Internet at "http://support.ts.fujitsu.com/contact/servicedesk"). When you do this, please have ready the identity number and serial number of your system. -
Page 35: The Device Cannot Be Switched Off With The On/Off Switch
The device cannot be switched on with the ON/OFF switch (0-Watt devices) Cause Troubleshooting The lithium battery is discharged. ► Press the emergency on button at the rear of the device, see chapter "Switching on a device when the lithium battery is discharged (0-Watt devices)", Page Fujitsu... -
Page 36: Monitor Remains Blank
Incorrect setting for the monitor ► Restart the system. ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu... -
Page 37: No Mouse Pointer Displayed On The Screen
(see "Replacing the lithium battery", Page 56). Error messages on the screen Error messages and their explanations are provided: • in the technical manual for the mainboard • in the documentation for the programs used Fujitsu... -
Page 38: Installing New Software
You will find the instructions for restoring the contents of the hard disk in the "Recovery Guide" manual. Tips Topic Out of system resources ► Close unnecessary applications. ► Run the applications in a different order. Other manuals Further manuals are provided as PDF files on the "Drivers & Utilities" DVD. Fujitsu... -
Page 39: System Expansions
An update of the BIOS may be required for a system expansion or hardware upgrade. Further information can be found in the BIOS help section or if necessary in the Technical Manual for the mainboard. Fujitsu... -
Page 40: Information About Boards
The equipment and tools you use must be free of static charges. • Only touch or hold the boards by the edge or, if present, at the areas marked green (Touch Points). • Never touch pins or conductors on boards fitted with ESDs. Fujitsu... -
Page 41: Opening The Casing
► On devices with a casing lock: Unlock the casing. ► Lay the device on its side in the manner shown. ► Pull the locking device (1) and swivel the side part in the direction of the arrow (2). Fujitsu... -
Page 42: Closing The Casing
• one drive bay for a non-accessible 2 inch drive (hard disk) "Accessible drives" are e.g. DVD or CD ROM drives, into which a data medium can be inserted from outside. "Non-accessible drives" are for example hard disk drives. Fujitsu... -
Page 43: Installing And Removing The Accessible 5
Proceed as follows: ► Open the casing (see "Opening the casing", Page 37). ► Remove the drive cover from the bracket in the direction of the arrow (1). ► Connect the drive cover to the drive (1). Fujitsu... -
Page 44: Installing An Accessible Drive
► Slide the accessible drive into the casing until it snaps in place (1). ► Connect the cables to the drive. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 38). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu... -
Page 45: Removing An Accessible Drive
► If you are not installing a new drive, reinstall the previously removed cover (optional) for the purposes of cooling, fire protection and to prevent foreign objects from getting into the casing. ► Close the casing (see "Closing the casing", Page 38). Fujitsu... -
Page 46: Installing/Removing The Smartcard Reader And/Or Wlan Module (Optional, 3½-Zoll)
If you want to install the SmartCard reader and the WLAN module together, first install the WLAN module. Removal is performed in the reverse order. If you have ordered a device without a WLAN module or SmartCard reader, a blind cover is installed instead of the module holder. Fujitsu... -
Page 47: Removing The Module Holder
Screwing the WLAN module onto the module holder ► Push the WLAN module - with the component side facing downwards - in the direction of the arrow (1) into the guide on the module holder (a). ► Fasten the WLAN module with the screws (2). Fujitsu... -
Page 48: Screwing The Smartcard Reader Onto The Module Holder
► Push the module holder into the casing in the direction of the arrow (1). ► Fasten the module holder with the screws (2). ► Connect the cables to the boards and the mainboard. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 38). Fujitsu... -
Page 49: Removing The Module Holder With Smartcard Reader And/Or Wlan Module
"Removing the SmartCard reader from the module holder", Page 46 "Removing the WLAN module from the module holder", Page 46) and install a blind cover in the drive bay. ► Close the casing (see "Closing the casing", Page 38). Fujitsu... -
Page 50: Removing The Smartcard Reader From The Module Holder
► Pull the SmartCard reader out of the module holder in the direction of the arrow (2). Removing the WLAN module from the module holder ► Undo the screws (1). ► Pull the WLAN module out of the module holder in the direction of the arrow. Fujitsu... -
Page 51: Removing And Installing The Memory Card Reader (Optional, 3½ Inch, Multicard)
► Fasten the memory card reader with the screws (2). ► Connect the cables to the memory card reader and to the mainboard. Make sure the polarity is correct. ► Close the casing (see "Closing the casing", Page 38). Fujitsu... -
Page 52: Removing The Memory Card Reader
► Remove the screws (1). ► Slide the memory card reader out of the casing in the direction of the arrow (2). ► Install a blind cover in the drive bay. ► Close the casing (see "Closing the casing", Page 38). Fujitsu... -
Page 53: Installing And Removing The Hard Disk Drive
You can find EasyChange rails for a second 3 inch hard disk drive on the drive cage. EasyChange rails for a second 2 inch hard disk drive are provided together with the drive. 1 = 2 inch hard disk 2 = 3 inch hard disks Fujitsu... -
Page 54: Installing A Hard Disk Drive
(1). Check that the component side of the hard disk drive faces inwards towards the casing floor. ► Connect the cables to the hard disk drive. ► Close the casing (see "Closing the casing", Page 38). It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu... -
Page 55: Removing The Hard Disk Drive
► Pull the EasyChange rails off the hard disk drive. ► If you no longer need the EasyChange rails, secure them again at their location in the drive cage. It may be necessary to modify the entry for the drive in the BIOS Setup. Fujitsu... -
Page 56: Installing And Removing A Board
► Open the casing (see "Opening the casing", Page 37). Board ► Swivel the retaining clamp (1) around towards the back wall of the device. ► Pull the slot cover out of the slot in the direction of the arrow (2). Fujitsu... - Page 57 ► Close the casing (see "Closing the casing", Page 38). If you have installed or removed a board, please check the relevant PCI slot settings in the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI board documentation. Fujitsu...
-
Page 58: Removing A Board
Push the plastic catch to the side to release the card. You can then remove the card as described below. ► Pull the board out of the slot in the direction of the arrow (2). ► Place the board in suitable packaging. Fujitsu... -
Page 59: Installing And Removing Heat Sinks
► Lift the heat sink out of the casing. You can now replace the processor. Never operate the device without a heat sink! Before initial startup, install the heat sink again in the same way as it was installed in the device before removal. Fujitsu... -
Page 60: Installing The Heat Sink
The lithium battery must then be replaced. For 0-Watt devices: As an interim solution, the device can be started using the emergency on button at the rear, see chapter "Switching on a device when the lithium battery is discharged (0-Watt devices)", Page Fujitsu... - Page 61 ► Press the catch in the direction of the arrow (1). The battery jumps out of the holder slightly. ► Remove the battery (2). ► Push the new lithium battery of the same type into the holder (3) and press it downward until it engages. Fujitsu...
-
Page 62: Technical Data
10 mm / 0.39 in with air vents min. 200 mm / 7.87 in The data sheets of these devices contains further technical data. The data sheets can be found on our website at "http://www.fujitsu.com/fts/". Fujitsu... -
Page 63: Index
19 Components installing/removing 35 Connecting a PS/2 keyboard 18 Function keys 25 Connecting, keyboard 18 mouse 18 PS/2 keyboard 18 Getting started 13 PS/2 mouse 18 USB keyboard 18 Contents of delivery 13 Headphones 16 Cord see Cable 15 Fujitsu... - Page 64 Line out 16 port 18 Lithium battery 56 replacing 57 Lock 28 Low voltage directive 11 Recycling 11 Replacing lithium battery 57 Replacing, lithium battery 57 Main memory 56 Retransportation 10–11 upgrading 56 Mainboard Upgrades 56 Mains adapter, Safety information 10 Fujitsu...
- Page 65 BIOS Setup 26 connecting keyboard 18 SmartCard reader, connecting the mouse 18 operating 29 User Documentation DVD 11 Software, installing 19, 21 System expansion 35 Workstation 14 System settings, BIOS Setup 26 System unit, see Device 11 Transportation 10–11 Fujitsu...