Sharp LC-40LE814E/RU Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. LCD TV
  5. LC-40LE814E/RU
  6. Service manual

Sharp LC-40LE814E/RU Service Manual

Hide thumbs
Table of Contents

Quick Links

TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its orig-
inal condition and only parts identical to those specified should be used.
This Service Manual covers the differences from LC-40/46LE810E and LC-40/46LE820E.
For other technical information, refer to the LC-40/46LE810E, LC-40/46LX810E (No. S30E940LE810E) Service
Manual and LC-40/46/52LE820E, LC-40/46LU820E (No. S30F240LE820E) Service Manual.
End of life disposal .................................................... v
MAJOR SERVICE PARTS ....................................... vi
[1]
SPECIFICATIONS .................................................1-1
[1]
OPERATION MANUAL ..........................................2-1
[1]
DIMENSIONS ........................................................3-1
[1]
ADJUSTMENT PROCEDURE ...............................4-1
Parts marked with "
" are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the
safety and performance of the set.

SERVICE MANUAL

LCD COLOUR TELEVISION
LC-40LE814E/RU
LC-46LE814E/RU
LC-40LE824E/RU
LC-46LE824E/RU
MODELS
OUTLINE
CONTENTS
[1]
TROUBLESHOOTING TABLE...............................5-1
[2]
[1]
MAJOR IC INFORMATIONS..................................6-1
[1]
(LC-40LE814E/RU) ................................................7-1
[2]
(LC-46LE814E/RU) ................................................7-2
[3]
(LC-40LE824E/RU) ................................................7-3
[4]
(LC-46LE824E/RU) ................................................7-4
[5]
[6]
Parts Guide
LC-40/46LE814/824E/RU (1st Edition)
No. S90K840LE814E
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Table of Contents
loading

Related Manuals for Sharp LC-40LE814E/RU

Summary of Contents for Sharp LC-40LE814E/RU

  • Page 1: Table Of Contents

    CHAPTER 5. TROUBLESHOOTING TABLE TROUBLESHOOTING TABLE.......5-1 OUTLINE..............i LED flashing specification at the time of the error . ..5-14 DIFFERENCES FROM BASE MODEL (LC-40LE814E/RU) ............ i DIFFERENCES FROM BASE MODEL CHAPTER 6. MAJOR IC INFORMATIONS MAJOR IC INFORMATIONS........6-1 (LC-46LE814E/RU) ............ i DIFFERENCES FROM BASE MODEL (LC-40LE824E/RU) ...........

  • Page 2: Outline And Differences From Base Model Outline

    OUTLINE This Service Manual covers the differences from LC-40/46LE810E and LC-40/46LE820E. For other technical information, refer to the LC-40/46LE810E, LC-40/46LX810E (No. S30E940LE810E) Service Manual and LC-40/46/52LE820E, LC-40/46LU820E (No. S30F240LE820E) Service Manual. DIFFERENCES FROM BASE MODEL (LC-40LE814E/RU) LC-40LE810E LC-40LE814E/RU Ref No.

  • Page 3: Differences From Base Model (Lc-40Le824E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) DIFFERENCES FROM BASE MODEL (LC-40LE824E/RU) LC-40LE820E LC-40LE824E/RU Ref No. Description Interchangeability Note (No. S30F240LE820E) (No. S90K840LE814E) PRINTED WIRING BOARD ASSEMBLIES MAIN Unit DKEYDF455FM01 DKEYDF455FM12 Changed ← ICON Unit DUNTKF493FM03 — No change ← LOGO Unit DUNTKF493FM04 — No change ←...

  • Page 4: Safety Precaution

    LC-40/46LE814/824E/RU (1st Edition) LC-40/46LE814/824E/RU (1st Edition) SAFETY PRECAUTION Service Manual IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING • Use an AC voltmeter having with 5000 ohm per volt, or higher, sen- sitivity or measure the AC voltage drop across the resistor.

  • Page 5: Precautions For Using Lead-Free Solder

    LC-40/46LE814/824E/RU (1st Edition) Precautions for using lead-free solder Employing lead-free solder • “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder. Example: F a/a Indicates lead-free solder of tin, silver and copper.

  • Page 6: End Of Life Disposal

    LC-40/46LE814/824E/RU (1st Edition) End of life disposal End of life disposal...

  • Page 7: Outline

    Therefore, please exchange of a TOUCH SENSOR Unit in the case of front cabinet exchange. OTHER UNIT Ref No. Parts Code Description R1LK400D3LWF2Y 40" LCD Panel Module Unit (LC-40LE814E/RU) R1LK460D3LWG2Y 46" LCD Panel Module Unit (LC-46LE814E/RU) R1LK400D3LWF0Y 40" LCD Panel Module Unit (LC-40LE824E/RU) R1LK460D3LWG0Y 46"...

  • Page 8: Chapter 1. Specifications Specifications

    The satellite channel’s frequency may vary according to satellites and antennas. • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

  • Page 9: Chapter 2. Operation Manual Operation Manual

    LC-40/46LE814/824E/RU (1st Edition) CHAPTER 2. LC-40/46LE814/824E/RU (1st Edition) OPERATION MANUAL Service Manual [1] OPERATION MANUAL TV (front view) (Volume buttons) (Programme [channel] buttons) INPUT (Input source button) MENU (Menu button) POWER (Power button) OPC sensor Remote control sensor Illumination LED TV (rear view) Antenna terminal Satellite antenna terminal...

  • Page 10: Remote Control Unit

    LC-40/46LE814/824E/RU (1st Edition) Remote control unit (Standby/On) LE824E ATV/DTV/SAT: Exit the “Menu” screen. NET: Return to the start page. Press to access conventional analogue TV mode. Press to access Net TV. Press to access digital TV mode. (Display information) Press to display the station information (channel number, signal, Press to access satellite mode.
  • Page 11 • Do not drop or place unnecessary stress on the stand when assembling and attaching or removing it. • Be sure to not accidentally hit the glass part of the stand with a sharp or hard object, as it may cause the glass to break.

  • Page 12: Chapter 3. Dimensions Dimensions

    LC-40/46LE814/824E/RU (1st Edition) CHAPTER 3. LC-40/46LE814/824E/RU (1st Edition) DIMENSIONS Service Manual [1] DIMENSIONS Unit: inch (mm) ) : LC-46LE824E LC-46LE824RU LC-46LE824E LC-46LE824RU ] : LC-40LE824E LC-40LE824RU LC-40LE824E LC-40LE824RU ( 1127.0 ) / [ 993.0 ] ( 1127,0 ) / [ 993,0 ] ( 1023.4 ) / [ 890.6 ] ( 1023,4 ) / [ 890,6 ] ( 540.0 )

  • Page 13: Chapter 4. Adjustment

    1. Procure the following units in order to replace the main unit MAIN UNIT: DKEYDF455FM11 (LC-40LE814E/RU, LC-46LE814E/RU) DKEYDF455FM12 (LC-40LE824E/RU, LC-46LE824E/RU) NOTE: [Caution when replacing ICs in the main unit (IC501, IC2002)] The above ICs are EEPROMs storing the EDID data of PC, and Monitor microcomputer.
  • Page 14 LC-40/46LE814/824E/RU (1st Edition) 2. Notes of Touch sensor unit (LC-40LE824E/RU, LC-46LE824E/RU) Touch sensor unit (RUNTKA761WJQZ) is fixed directly in the module glass. The unit cannot never be recycled when exfoliated from the module glass. Therefore, please exchange the touch sensor units when the module glass is changed. Please note the adhesion and mixing of dust for the module glass when the module glass and the touch sensor unit are exchanged.
  • Page 15 LC-40/46LE814/824E/RU (1st Edition) 6. Description of display (1) Present page / number of total pages (4) Inducing display (3) Present colour system (2) Input that has been selected now (5) Inch setting and Model name display 1/21 INPUT1 AUTO EURO xxxxx MAIN Version 1.00 (E 2009/**/** )

  • Page 16: Adjustment Process Mode Menu

    LC-40/46LE814/824E/RU (1st Edition) 7. Adjustment process mode menu The character string in brackets [ ] will appear as a page title in the adjustment process menu header. Page Line Item Description Remarks (adjustment detail, etc.) 1/21 MAIN Version 1xxx (xxxxx) Main software version BOOT Version xxxxxxx...
  • Page 17 LC-40/46LE814/824E/RU (1st Edition) Page Line Item Description Remarks (adjustment detail, etc.) 5/21 HDMI CEC TEST Enter HDMI CEC test INSPECT USB TERM Enter Reading inspection of USB memory terminal HDMI EDID WRITE Enter HDMI EDID WRITING MONIDATA READ [TEMP/OPC] MONITOR Temperature/OPC Acquisition tool. CAUSE RESET Enter Reset of standby cause...
  • Page 18 LC-40/46LE814/824E/RU (1st Edition) Page Line Item Description Remarks (adjustment detail, etc.) 14/21 FRV-N Firmware Version xxxxx FRC-N Boot Script Version xxxxx FRC-N Device Version xxxxx TCON FPGA1 Serial Flash Version xxxxx TCON FPGA2 Serial Flash Version xxxxx TCON FPGA1 Config Rom Version xxxxx TCON FPGA2 Config Rom Version xxxxx...

  • Page 19: Special Features

    LC-40/46LE814/824E/RU (1st Edition) Page Line Item Description Remarks (adjustment detail, etc.) 21/21 EEP SAVE Writing setting values to EEPROM. EEP RECOVER Reading setting values from EEPROM. MONITOR ERROR CAUSE RESET Reset of monitor error cause MODEL NAME LE824 MODEL NAME PANEL SIZE Panel size setting.
  • Page 20 LC-40/46LE814/824E/RU (1st Edition) 9. Lamp Error detection 1. Function This LCD colour TV set incorporates a Lamp error detection feature that automatically turns off the power for safety under abnormal lamp or lamp circuit conditions. If by any chance anything is wrong with the lamp or lamp circuit or if the lamp error detection feature is activated for some rea- son, the following will result.
  • Page 21 LC-40/46LE814/824E/RU (1st Edition) 10. Public Mode 1. Starting the Public Mode • There are two following ways to display the PUBLIC Mode setting screen. 1) Method of needing password a) Turn off the power, refer to “3. Method of shuts down for Power supply” b) While holding down the “INPUT”...
  • Page 22 LC-40/46LE814/824E/RU (1st Edition) 4. Basic operation in the Public Mode Change or execution of the set value. Vol (+/-) or Cursor ( / ) Movement to the selected item. CH ( ) or Cursor ( / ) Decision (ok) Execution (Used by the items “Execution” and “RESET”.) Public Mode setting screen.
  • Page 23 LC-40/46LE814/824E/RU (1st Edition) 2) Instantaneous current shutdown setting in turning off the power [SHUT DOWN MODE] Option “NORMAL” or “QUICK” Default NORMAL Function • This function decides whether scanning digital tuner is enabled or disabled when the power is standby. NORMAL : Scanning digital tuner is enabled when the power is standby.
  • Page 24 LC-40/46LE814/824E/RU (1st Edition) 7) Main Unit Operation [PANEL BUTTON] Option “RESPOND” or “NORESPOND” (loop enabled) Default “RESPOND” Function • RESPOND : The main unit’s keys are enabled. • NO RESPOND : The main unit’s keys are disabled excluding the POWER key (RECEPTION/STANDBY key).
  • Page 25 LC-40/46LE814/824E/RU (1st Edition) 10)OSD display [ON SCREEN DISPLAY] Option “YES”, “NO” or “LIMITED” (loop enabled) “LIMITED” is looped only in case of need (destination). Default “YES” Function • : OSD is displayed • : the following OSD is not displayed. Registration, setting, adjustment menu, channel call, volume bar, and input select •...

  • Page 26: Video Signal Adjustment Procedure

    LC-40/46LE814/824E/RU (1st Edition) 13)Speaker ON/OFF selection [LOUD SPEAKER] Option “ON” or “OFF” (loop enabled) Default Function : The sound from the speakers is output. : The sound from the speakers is not output even if the headphones are not used. Remarks •...
  • Page 27 LC-40/46LE814/824E/RU (1st Edition) 11.2. PAL signal adjustment Adjustment point Adjustment conditions Adjustment procedure Setting [Signal] • Feed the PAL full field colour bar signal (75% colour saturation) to EXT1 SCART IN. Full field colour bar composite [VIDEO input signal] signal [Terminal] 100% white Black...
  • Page 28 LC-40/46LE814/824E/RU (1st Edition) 11.5. ADC adjustment (Component 15K) Adjustment point Adjustment conditions Adjustment procedure Setting [Signal] • Feed the COMPONENT 15K 100% full field colour bar signal (100% COMP15K, 50Hz colour saturation) to EXT3 COMPONENT IN. 100% Full field colour bar Signal [Terminal] 100% white Black...

  • Page 29: White Balance Adjustment

    LC-40/46LE814/824E/RU (1st Edition) 12. White Balance Adjustment For white balance adjustment, adjust the offset values on pages 11/21. [Condition of the unit for inspection] : Modulated light (+16), Colour temperature (High) AV MODE: DYNAMIC Active Backlight: OFF OPC: OFF Asing Time: Min,60 minute [Input signal condition] : HDMI 1080i 15IRE (LO), 78IRE (HI) [Adjustment reference device]...

  • Page 30: Initialization To Factory Settings

    LC-40/46LE814/824E/RU (1st Edition) 14. Initialization to factory settings CAUTION: When the factory settings have been made, all user setting data, including the channel settings, are initialized. (The adjustments done in the adjustment process mode are not initialized.) Keep this in mind when initializing these settings. Adjustment point Adjustment conditions Adjustment procedure...
  • Page 31 LC-40/46LE814/824E/RU (1st Edition) 6. The caution for update showes up. • The picture will temporary go dark until the software update display apeeares • Wait several minutes and don't unplug the AC cord Select OK when if there is no problem. 7.

  • Page 32: Chapter 5. Troubleshooting Table Troubleshooting Table

    LC-40/46LE814/824E/RU (1st Edition) CHAPTER 5. LC-40/46LE814/824E/RU (1st Edition) TROUBLESHOOTING TABLE Service Manual [1] TROUBLESHOOTING TABLE No power (Central Icon LED failure to light up) or No startup (Central Icon LED is flashing) Is the AC cord connector tightly connected to the set? Reconnect the AC cord tightly and turn on the power again.
  • Page 33 LC-40/46LE814/824E/RU (1st Edition) The sound is not emitted from the Speaker & Woofer though the picture has come out. No sound output in all modes? Is the signal output from pins (F30/AOLRCK), (F28/AOBCK) Check IC3302 and its peripheral circuits. (G28/AOSDATA0) of IC3302 (Digital AV decode & Main CPU)? Is the signal sent to pins (7), (8), (9) of IC2701 (DSP)? Check the line between IC3302 and IC2701.
  • Page 34 LC-40/46LE814/824E/RU (1st Edition) No sound (during the reception of TV (ANALOG) broadcasting) Does not the sound go out though the picture has come out when UHF/VHF is received? Is a SIF signal output from pin (13) of TUNER (TU1101)? Check the tuner and its peripheral circuits. Replace as required.
  • Page 35 LC-40/46LE814/824E/RU (1st Edition) No sound (during the reception of TV (DIGITAL-Satellite) broadcasting) Does not the sound go out though the picture has come out when DTV is received? Is signal input to TU1301? Check the setting of an external input device that connects with TU1301.
  • Page 36 LC-40/46LE814/824E/RU (1st Edition) No sound from external input devices (1) Does not the sound of the audio signal input to EXT1 go out? Is there a audio input signal to pins (19/AUDIO_IN_L) and (21/ Check the setting of an external input device that connects with AUDIO_IN_R) of EXT1 (SC505)? EXT1.
  • Page 37 LC-40/46LE814/824E/RU (1st Edition) No sound from external output device (1) No audio signal output to EXT1 terminal. Is there a audio input signal to pins (10/AUDIO_OUT_L) and (12/ Check the setting of an external input device that connects with AUDIO_OUT_R) of EXT1 (SC505)? EXT1.
  • Page 38 LC-40/46LE814/824E/RU (1st Edition) No sound from external output device (3) No sound from DIGITAL AUDIO OUTPUT terminal. Is the audio signal output to pins (1) of sound output terminal Check D520 and peripheral circuits. (D520)? Is SPDIF_MUTE signal SPDIF_MUTE [H29/IC3302] or Check the peripheral circuits of IC3302 and SPDIF_MUTE.
  • Page 39 LC-40/46LE814/824E/RU (1st Edition) No picture on the display (1) The picture doesn't appear in all modes. Is the LVDS signal output from IC3302 (DIGITAL_AV_DECODER_&_MAIN_CPU_&_VIDEO PROCESSER) respectively? LVDS0_D0N/P (D14/C14), LVDS0_D1N/P (D15/C15), LVDS0_D2N/P (D16/C16), LVDS0_CLKN/P_83MHz (D17/C17), LVDS0_D3N/P (D18/C18), LVDS0_D4N/P (D19/C19), LVDS1_D0N/P (B14/A14), LVDS1_D1N/P (B15/A15), LVDS1_D2N/P (B16/A16), LVDS1_CLKN/P_83MHz (B17/A17), LVDS1_D3N/P (B18/A18), LVDS1_D4N/P (B19/A19) Check IC3302 and its peripheral control circuits.
  • Page 40 LC-40/46LE814/824E/RU (1st Edition) [External input EXT1] No picture on the display (5) Does not the picture of the CVBS signal input to EXT1 go out? Is CVBS signal sent to pin (14) of EXT1 (SC505)? Check the setting of an external input device that connects with EXT1.
  • Page 41 LC-40/46LE814/824E/RU (1st Edition) [External input EXT2] No picture on the display (8) Does not the picture of the CVBS signal input to EXT2 go out? Is a CVBS signal input to pin (3) of EXT8 (J505)? Check the setting of an external input device that connects with EXT2.
  • Page 42 LC-40/46LE814/824E/RU (1st Edition) [External input HDMI-1/2/3/4] No picture on the display (11) Does not the picture/sound of the HDMI signal input to HDMI-1/2/3/4 go out? Is the Hot plug detection function output from pin (19) of the Check the line between SC1503 and pin (45) of IC1504 (HDMI- HDMI-1 (SC1503) normal? SW).
  • Page 43 LC-40/46LE814/824E/RU (1st Edition) No picture on the monitor No picture appears on EXT1connected monitor during the ATV/DTV reception. Is CVBS signal output into pin (2) of EXT1 (SC505)? Check the setting of an external input device that connects with EXT1.
  • Page 44 LC-40/46LE814/824E/RU (1st Edition) No light (Back Light doesn't light) Is the AC cord connector tightly connected to the set? Reconnect the AC cord tightly and turn on the power again. Are the wire harnesses and other cables properly connected in Reconnect the wire harnesses and other cables properly in the the set? set.

  • Page 45: Led Flashing Specification At The Time Of The Error

    LC-40/46LE814/824E/RU (1st Edition) [2] LED flashing specification at the time of the error Display method • Refer to Table 1. • LED that can be used is only one of the central icons. This expresses the error situation by combining blinking at low speed and blinking at high speed. •...
  • Page 46 LC-40/46LE814/824E/RU (1st Edition) Table 1. Concrete flashing pattern Expression for a rough content Expression for Details Item low-speed high-speed low-speed high-speed Cause blinking blinking blinking blinking Lamp system failure Flashes once — Flashes once Flashes once Lamp error Power PWB failure Flashes twice —...
  • Page 47 LC-40/46LE814/824E/RU (1st Edition) LED flashing timing chart at the time of the error 100ms 400ms 1.6sec 1) Low-speed blinking Error type Expression of Central Icon LED Note: Pins are monitor microprocessor pins (IC2002). Lamp failure H: ON Refer to “Lamp failure details”. low-speed blinking LOW/High blinking by pressing the [MENU] key on the remote Flashes once...
  • Page 48 LC-40/46LE814/824E/RU (1st Edition) 4) Communication failure details (Low-speed blinking: Flashes 3 times + High-speed blinking) Note: Basically, debug print logs are analyzed or Error type Expression of Central Icon LED communication logs are analyzed by a bus monitor. Initial communication H: ON Initial communication from the main CPU is not received.

  • Page 49: Chapter 6. Major Ic Informations

    LC-40/46LE814/824E/RU (1st Edition) CHAPTER 6. LC-40/46LE814/824E/RU (1st Edition) MAJOR IC INFORMATIONS Service Manual [1] MAJOR IC INFORMATIONS REF NO Name Part Code Description [MAIN UNIT] IC8401 RH-iXD047WJQZQ Flash This IC is 1024Mbit NAND flash memory. This IC stores the software data that processes the system of TV such as the graphic processing, the LCD controls, and backlights etc.
  • Page 50 LC-40/46LE814/824E/RU (1st Edition) MEMO 6 – 2...

  • Page 51: Chapter 7. Overall Wiring/Block Diagram Overall Wiring Diagram (Lc-40Le814E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) LC-40/46LE814/824E/RU (1st Edition) CHAPTER 7. OVERALL WIRING/BLOCK DIAGRAM Service Manual [1] OVERALL WIRING DIAGRAM (LC-40LE814E/RU) 7 – 1...

  • Page 52: Overall Wiring Diagram (Lc-46Le814E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) [2] OVERALL WIRING DIAGRAM (LC-46LE814E/RU) 7 – 2...

  • Page 53: Overall Wiring Diagram (Lc-40Le824E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) [3] OVERALL WIRING DIAGRAM (LC-40LE824E/RU) 7 – 3...

  • Page 54: Overall Wiring Diagram (Lc-46Le824E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) [4] OVERALL WIRING DIAGRAM (LC-46LE824E/RU) 7 – 4...

  • Page 55: System Block Diagram (Lc-40Le814E/Ru)(Lc-46Le814E/Ru)

    LC-40/46LE814/824E/RU (1st Edition) [5] SYSTEM BLOCK DIAGRAM (LC-40LE814E/RU)(LC-46LE814E/RU) 7 – 5...

  • Page 56: System Block Diagram

    LC-40/46LE814/824E/RU (1st Edition) [6] SYSTEM BLOCK DIAGRAM (LC-40LE824E/RU)(LC-46LE824E/RU) 7 – 6...
  • Page 57 MODELS CONTENTS SUPPLIED ACCESSORIES PRINTED WIRING BOARD ASSEMBLIES PACKING PARTS LCD PANEL MODULE (NOT REPLACEMENT ITEM) (LC-40LE814/824E/RU) CABINET PARTS (LC-40LE814E/RU) PACKING PARTS CABINET PARTS (LC-46LE814E/RU) (NOT REPLACEMENT ITEM) (LC-46LE814/824E/RU) CABINET PARTS (LC-40LE824E/RU) CABINET PARTS (LC-46LE824E/RU) [10] SERVICE JIGS (USE FOR SERVICING) Parts marked with "...
  • Page 58 RUNTKA692WJQZ TOUCH SENSOR Unit (LC-40LE824E/RU)(LC-46LE824E/RU) RUNTKA761WJQZ LCD CONTROL Unit RUNTK4512TPZC [2] LCD PANEL MODULE 40" LCD Panel Module Unit (LC-40LE814E/RU) R1LK400D3LWF2Y 46" LCD Panel Module Unit (LC-46LE814E/RU) R1LK460D3LWG2Y 40" LCD Panel Module Unit (LC-40LE824E/RU) R1LK400D3LWF0Y 46" LCD Panel Module Unit (LC-46LE824E/RU)
  • Page 59 LC-40/46LE814/824E/RU (1st Edition) [3] CABINET PARTS (LC-40LE814E/RU) Note: Be sure to attach this insulation sheet. (Ref No. 2-6, 25, 53) Otherwise there is a risk of electric shock. 1-10 1-11 ICON Unit TOUCH SENSOR R/C, Unit LED Unit MAIN POWER...
  • Page 60 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [3] CABINET PARTS (LC-40LE814E/RU) Front Cabinet Ass'y (for Europe) CCABAC527WJ1A Front Cabinet Ass'y (for Russia) CCABAC527WJ1B Front Cabinet Not Available R/C Decoration Cover HDECQB442WJ1A Front Decoration HDECZA038WJSA Protect Tape, x4...
  • Page 61 LC-40/46LE814/824E/RU (1st Edition) [4] CABINET PARTS (LC-46LE814E/RU) Note: Be sure to attach this insulation sheet. (Ref No. 2-6, 27, 57) Otherwise there is a risk of electric shock. 1-10 1-11 ICON POWER Unit Unit TOUCH SENSOR R/C, Unit LED Unit MAIN Unit 46 46...
  • Page 62 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [4] CABINET PARTS (LC-46LE814E/RU) Front Cabinet Ass'y (for Europe) CCABAC528WJ1A Front Cabinet Ass'y (for Russia) CCABAC528WJ1B Front Cabinet Not Available R/C Decoration Cover HDECQB442WJ1A Front Decoration HDECZA039WJSA Protect Tape, x4 PSHEZA247WJZZ Protect Tape, x2 PSHEZA249WJZZ...
  • Page 63 LC-40/46LE814/824E/RU (1st Edition) [5] CABINET PARTS (LC-40LE824E/RU) Note: Be sure to attach this insulation sheet. (Ref No. 2-6, 25, 53) Otherwise there is a risk of electric shock. ICON LOGO Unit R/C, Unit Unit TOUCH SENSOR Unit MAIN POWER Unit Unit 40"...
  • Page 64 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [5] CABINET PARTS (LC-40LE824E/RU) Front Cabinet Ass'y CCABAC621WJ12 Front Cabinet Not Available R/C Decoration Cover HDECQB420WJ1A Front Decoration HDECZA028WJSA Spacer PSPAGA906WJZZ Double Side Tape, x5 PSPAZC495WJZZ Protect Tape, x4 PSHEZA246WJZZ Protect Tape, x2 PSHEZA248WJZZ...
  • Page 65 LC-40/46LE814/824E/RU (1st Edition) [6] CABINET PARTS (LC-46LE824E/RU) Note: Be sure to attach this insulation sheet. (Ref No. 2-6, 27, 57) Otherwise there is a risk of electric shock. LOGO Unit ICON R/C, Unit Unit POWER Unit d TOUCH SENSOR Unit MAIN Unit 46 46...
  • Page 66 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [6] CABINET PARTS (LC-46LE824E/RU) Front Cabinet Ass'y CCABAC612WJ12 Front Cabinet Not Available R/C Decoration Cover HDECQB420WJ1A Front Decoration HDECZA029WJSA Spacer PSPAGA907WJZZ Double Side Tape, x3 PSPAZC495WJZZ Protect Tape, x4 PSHEZA246WJZZ Protect Tape, x2 PSHEZA249WJZZ...

  • Page 67: (Lc-40Le824E/Ru)(Lc-46Le824E/Ru)

    DESCRIPTION PART RANK MARK DELIVERY [7] SUPPLIED ACCESSORIES Stand Support Ass'y CANGKC707WJ01 (LC-40LE814E/RU)(LC-40LE824E/RU) Stand Support Ass'y CANGKC708WJ01 (LC-46LE814E/RU)(LC-46LE824E/RU) Stand Unit (LC-40LE814E/RU)(LC-40LE824E/RU) CDAI-A709WJ04 Stand Unit (LC-46LE814E/RU)(LC-46LE824E/RU) CDAI-A710WJ04 Stand Screw Ass'y CX-BZA363WJ01 Cable Clamp LHLDWA298WJKA SCART Cable QCNWGA158WJPZ RGB Component Cable QCNWGA159WJPZ...
  • Page 68 LC-40/46LE814/824E/RU (1st Edition) [8] PACKING PARTS (NOT REPLACEMENT ITEM)(LC-40LE814/824E/RU) for Europe for Europe for Russia...
  • Page 69 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [8] PACKING PARTS (NOT REPLACEMENT ITEM)(LC-40LE814/824E/RU) Packing Case SPAKCF805WJZZ Wrapping Paper SPAKPB475WJZZ Wrapping Paper, x2 SPAKPB526WJZZ Wrapping Paper SPAKPB528WJZZ Packing Add. (Top) SPAKXC920WJZZ Packing Add. (Bottom) SPAKXD105WJZZ Polyethylene Bag SSAKAA009WJZZ Polyethylene Bag, x3 (for Europe) SSAKAA111WJZZ...
  • Page 70 LC-40/46LE814/824E/RU (1st Edition) [9] PACKING PARTS (NOT REPLACEMENT ITEM)(LC-46LE814/824E/RU) for Europe for Europe for Russia...
  • Page 71 LC-40/46LE814/824E/RU (1st Edition) PRICE PARTS CODE PART DESCRIPTION RANK MARK DELIVERY [9] PACKING PARTS (NOT REPLACEMENT ITEM)(LC-46LE814/824E/RU) Packing Case (Top) SPAKCF804WJZZ Packing Case (Bottom) SPAKCF496WJZZ Wrapping Paper SPAKPB477WJZZ Wrapping Paper, x2 SPAKPB527WJZZ Wrapping Paper SPAKPB529WJZZ Packing Add. (Top) SPAKXC921WJZZ Packing Add. (Bottom) SPAKXD106WJZZ Polyethylene Bag SSAKAA009WJZZ...
  • Page 72 LC-40/46LE814/824E/RU (1st Edition) COPYRIGHT 2010 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

This manual is also suitable for:

Lc-46le824e/ruLc-40le824e/ruLc-46le814e/ruLc-40le814eLc-46le814eLc-40le824e ... Show all

Table of Contents