Related Manuals for Avantco UBB2448
Summary of Contents for Avantco UBB2448
- Page 1 User Manual Intertek Back Bar Refrigerator User’s Manual 05/2015 UBB2448, UBB2448G, 178UBB2448GS, UBB2460, UBB2460G, 178UBB2460GS, UBB2472F, UBB2472G, 178UBB2472GS Please read the manual thoroughly prior to equipment set-up, operation and maintenance. - 1 -...
-
Page 2: Installation
User Manual Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Important!!! Please Read Before Installation • If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before plugging it in. •... -
Page 3: Adjusting The Temperature
User Manual Electrical • Please ensure that the required voltage is being supplied at all times. • The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over-current protection. NEVER USE AN ADAPTER PLUG! Please refer to the electrical requirements on the unit’s nameplate. -
Page 4: Defrost System
User Manual Running a Manual Defrost Cycle This unit is pre-programmed to run automatic defrost cycles at preset intervals. However, if you would like to run a manual defrost cycle at any time, please follow the steps below: Refrigerators: Press the defrost button (snowflake symbol and down arrow) for approximately 3 seconds. -
Page 5: Troubleshooting
User Manual Cleaning the Interior of Unit • When cleaning the cabinet interior, use a solvent of warm water and mild soap. • Do not use steel wool, caustic soap, abrasive cleaners, or bleach that may damage the interior finish. •... -
Page 6: Warranty Information
Next, call 1-800-678-5517. Be sure to have the model number, cabinet serial number, and service plate number available when contacting service technicians. This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used outside of the United States.