Sony BDP-S300 Service Manual
Hide thumbs Also See for BDP-S300:
SERVICE MANUAL
Ver. 1.1 2007.07
System
Laser: Semiconductor laser
Outputs
(Jack name: Jack type/Output level/
Load impedance)
AUDIO OUT L/R:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/−18 dBm (wave
length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
5.1CH OUTPUT:
Phono jack/2 Vrms/10 kilohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT(Y, /P
P
/C
):
R
R
Phono jack/Y: 1.0 Vp-p/P
progressive or interlace
= 0.7 Vp-p/75 ohms
BDP-S300/S301
Photo: BDP-S300
SPECIFICATIONS
VIDEO: Phono jack/1.0 Vp-p/75 ohms
S VIDEO: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.286 Vp-p/75ohms
1.0 Vp-p, C: 0.3 Vp-p (PAL)/Y: 1.0
Vp-p, C: 0.286 Vp-p (NTSC)/75ohms
1.0 Vp-p, C: 0.3 Vp-p (PAL)/75ohms
General
Power requirements:
120 V AC, 60 Hz (US, CND)
110–240 V AC, 50/60 Hz (E32)
220–240 V AC, 50/60 Hz
Power consumption: 33 W
Dimensions (approx.):
430 × 79 × 375 mm (17 × 3
/C
,
B
B
7
14
/
in.) (width/height/depth) incl.
8
/C
, P
/C
:
projecting parts
B
B
R
R
TM
(US, CND)
(SP)
(Except US, CND, SP)
(Except US, CND, E32)
1
×
/
8
BLU-RAY DISC PLAYER
RMT-B101A/B101P
US Model
Canadian Model
BDP-S300/S301
AEP Model
UK Model
E Model
Russian Model
Australian Model
Singapore Model
Thai Model
BDP-S300
Mass (approx.): 4.5 kg (10 lb)
Operating temperature:
5 °C to 35 °C (41°F to 95°F)
Operating humidity:
25 % to 80 %
Supplied accessories
• Video cord (phono plug × 1) (1)
• Stereo audio cord (phono plug × 2) (1)
• HDMI cord (1)
(supplied with BDP-S301 only)
• Power cord (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• Plug Adaptor (1) (E32)
• GNU License Information (1)
(Except US, CND)
Specifications and design are subject to
change without notice.
Abbreviation
CND : Canadian model
E32 : Latin American model
SP
: Singaporean model
Table of Contents
loading

Summary of Contents for Sony BDP-S300

  • Page 1 AEP Model UK Model E Model Russian Model Australian Model Singapore Model Thai Model BDP-S300 Photo: BDP-S300 SPECIFICATIONS Mass (approx.): 4.5 kg (10 lb) VIDEO: Phono jack/1.0 Vp-p/75 ohms System Operating temperature: S VIDEO: 4-pin mini DIN/Y: Laser: Semiconductor laser 5 °C to 35 °C (41°F to 95°F)
  • Page 2 FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS It is best to use only unleaded solder but unleaded solder may QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS also be added to ordinary solder.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page SERVICE NOTE SCHEMATIC DIAGRAMS AND PRINTED WIRING DISC REMOVAL PROCEDURE IF THE TRAY BOARDS CANNOT BE EJECTED (FORCED EJECTION) ..4 INSTALLATION METHOD OF EARTH SPRING 4-1. Frame Schematic Diagram ..........4-1 (FRONT) ................
  • Page 4: Service Note

    SERVICE NOTE 1. DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) 1. Remove the upper case. (Refer to page 2-1) 2. Insert a clip in the hole of a drive and open a tray. clip tray 2. INSTALLATION METHOD OF EARTH SPRING (FRONT) 1.
  • Page 5: Installation Method Of Non-Halogene Tape

    4. INSTALLATION METHOD OF NON-HALOGENE TAPE 1. Please connect a drive power supply harness after an exchange of a drive and fix by a reuse clamp. 2. Please stick a non-halogene tape so that a power supply harness may be fixed on the drive back. non-halogene tape 5.
  • Page 6 5-1-1. BLX-104 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 5-1-2. BLX-104 Menu Function (2) Main Menu To Main Menu after playback of T62_C1 To Main Menu after playback of T61_C1 To Main Menu after playback from T54_C1 to T60_C1 Sub_menu3 is displayed To Main Menu after playback of T21_C1...
  • Page 7 5-1-3. BLX-104 Menu Function (3) Main Menu To Main Menu after playback of T52_C1 To Main Menu after playback of T51_C1 To Main Menu after playback from T44_C1 to T50_C1 Sub_menu2 is displayed To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1 Sub_menu4 is displayed...
  • Page 8 5-1-4. BLX-104 Menu Function (4) Sub menu1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
  • Page 9 5-1-5. BLX-104 Menu Function (5) Sub menu2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 10 5-1-6. BLX-104 Menu Function (6) Sub menu3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 11 5-1-7. BLX-104 Menu Function (7) Sub menu4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
  • Page 12 5-2-1. BLX-204 Menu Function (1) Main Menu 1) When the disc is inserted, 1. Video Signal of 59.94Hz/1080i of the Main Menu is selectively displayed. 2-2-2. BLX-204 Menu Function (2) Main Menu To Main Menu after playback of T83_C1 To Main Menu after playback of T62 t T82 To Main Menu after playback of T61_C1 To Main Menu after playback of T54_C1-T60_C1 t T83_C1-T94_C1 Sub_menu3 is displayed...
  • Page 13 5-2-3. BLX-204 Menu Function (3) Main Menu To Main Menu after playback of T70_C1 To Main Menu after playback of T52_C1tT69 To Main Menu after playback of T51_C1 To Main Menu after playback of T44_C1-T50_C1tT71_C1-T81_C1 Sub_menu2 is displayed To Main Menu after playback of T68_C1 To Main Menu after playback of T42_C1 To Main Menu after playback of T41_C1 To Main Menu after playback from T23_C1 to T40_C1...
  • Page 14 5-2-4. BLX-204 Menu Function (4) Sub menu 1 1) At the display of Sub menu1, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu1 after seamless playback from T1_C1 to T1_C13. 1. Color Bar 100% is selectively displayed on Sub menu1 screen.
  • Page 15 5-2-5. BLX-204 Menu Function (5) Sub menu 2 1) At the display of Sub menu2, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu2 after seamless playback from T43_C1 to T43_C13. 1. Color Bar 100% is selectively displayed on Sub menu2 screen.
  • Page 16 5-2-6. BLX-204 Menu Function (6) Sub menu 3 1) At the display of Sub menu3, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu3 after seamless playback from T53_C1 to T53_C13. 1. Color Bar 100% is selectively displayed on Sub menu3 screen.
  • Page 17 5-2-7. BLX-204 Menu Function (7) Sub menu 4 1) At the display of Sub menu4, 1. Color Bar 100% is selectively displayed. 2) Selection of 1. Color Bar 100% t Return to Sub menu4 after seamless playback from T22_C1 to T22_C13. 1. Color Bar 100% is selectively displayed on Sub menu4 screen.
  • Page 18 MEMO – 18 –...
  • Page 19: General

    ‘BRAVIA’ Theatre Sync Function makes operations simple by This product incorporates copyright protection technology that connecting Sony components that are compatible with the is protected by U.S. patents and other intellectual property rights. HDMI Control function with an HDMI cord.
  • Page 20: Getting Started

    Digital and DTS bit stream (5.1ch signals up to 96 kHz, 16/20/ features (for HDMI connections only) 24bit). Stereo amplifier (receiver) and By connecting Sony components that are compatible with the two speakers Note HDMI Control function with an HDMI cord, operation is...
  • Page 21 Connecting to an AV amplifier Connecting to an AV amplifier Connecting to your TV Connecting to a stereo amplifier (receiver) having a Dolby Surround (Pro (receiver) with 5.1ch input jacks and 6 (receiver) and 2 speakers This connection will use your TV’s speakers for sound. Logic) decoder and 3 to 6 speakers speakers If your stereo amplifier (receiver) only has audio input jacks L...
  • Page 22: Basic Operations

    Easy Setup manufacturer’s code. You can control the volume, input source, and power switch of Before using, make some simple your Sony TV with the supplied remote. settings for the BD player. While holding down TV [/1, press the number Start buttons to select your TV manufacturer’s code...
  • Page 23 Press Z to close the disc tray. About the screen saver function Title List Guide to Displays Wait a short while until the disc type appears on the To prevent damage to your display device (ghosting), a screen For DATA DVDs, this display leads further to the Title Lists of front panel display.
  • Page 24 G SYSTEM MENU (page 22) I For TVs operable with the following buttons, see Searching using the remote Checking the Disc page 17. – Enters/exits the player’s start menu (“System Menu”). Information DATA DVD MUTING (page 17) TOP MENU (page 20) –...
  • Page 25: Watching Movie Files

    Setting the Parental Control for DVD Setting the Parental Control for BD- Locking a Disc Setting/changing the password VIDEOs ROMs Setup Setup Setup Video Setup Change Password Next Screen Audio Setup DVD Parental Control Next Screen Language BD Parental Control Next Screen Change Level Change Age Restriction...
  • Page 26: Listening To Music Files

    About the “Movies” (All Movies) Title List Browsing by Genre, Searching for a Title Playing a title display Quicklist, or Folder a After step 3 of “Viewing All Titles” above, All Movies select the title you want to play, and press 1214 items ENTER or H.
  • Page 27: Viewing Photo Files

    About the “Music” (All Songs) Title List display Browsing by Artist, Album, Searching for a Track Playing a track Genre, Quicklist, or Folder a After step 3 of “Viewing All Artists” above, All Songs 1214 items Never Let Me Down (Split Mix) 9:31 narrow down the list of tracks by selecting Policies of Truth...
  • Page 28: Changing The Initial Settings

    About the “Photos” (All Photos) Title List Browsing by Date, Searching for a Photo Playing a slideshow display Quicklist, or Folder a After step 3 of “Viewing All Folders” above, All Photos 1214 items press and select “All Photos” from the Browse menu.
  • Page 29: Video Setup

    To set the video output resolution Video Setup Press VIDEO FORMAT repeatedly to select the desired resolution. Note that the resolution differs depending on the display device, connecting jack and the source material as below. Connecting HDMI OUT COMPONENT VIDEO OUT VIDEO/S VIDEO jack Settings...
  • Page 30: Parental Control

    Language Parental Control Underlined items are the default settings. This function limits playback of DVD VIDEOs and BD-ROMs. To activate, see “Locking a Disc” (page 29). Notes The default settings are underlined. • When you select a language in “Audio,” “Subtitles,” “BD/DVD Menu” that is not recorded on the disc, one of the recorded languages is Notes automatically selected.
  • Page 31: Additional Information

    If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, Information consult your nearest Sony dealer (For customers in the USA only). HDMI FL OFF...
  • Page 32: Index To Parts And Controls

    Error code Cause and/or corrective action AACS ERR AACS read failure. Remove the protected disc. LSI1 ERR Contact your nearest Sony dealer LSI2 ERR or local authorized Sony service LSI3 ERR facility and give the error code. MEM ERR FLASH ERR...
  • Page 33 and recompiling it. And you must show them “this License”). Each licensee is addressed reasonably considered independent and on the Program), you indicate your Software Foundation, write to the Free If the program is interactive, make it output a acceptance of this License to do so, and all Software Foundation;...
  • Page 34: Specifications

    BD-ROM (page 5) Dolby TrueHD (page 48) DISCLAIMED. IN NO EVENT SHALL THE Glossary COPYRIGHT OWNER OR CONTRIBUTORS libpng versions 0.5, May 1995, through 0.88, Luxi fonts copyright (c) 2001 by Bigelow & BD-ROMs (Blu-ray Disc Read-Only Dolby TrueHD is a lossless coding BE LIABLE FOR ANY DIRECT, INDIRECT, January 1996, are Copyright (c) 1995, 1996 Guy Holmes Inc.
  • Page 35 Index Parental Control “Language” 49 Country/Area “Memory” 28 Code List “Movies” 32 MPEG 32 Words in quotations appear in the on- For details, see pages 50 and 52. “Music” 36 screen displays. Area (abbr.) Code Numerics Argentina (ar) 0118 “Options” 52 5.1CH OUTPUT 14 Australia (au) 0121...
  • Page 36 MEMO 1-18E...
  • Page 37: Disassembly And Reassembly

    BDP-S300/S301 SECTION 2 DISASSEMBLY AND REASSEMBLY 2-1. DISASSEMBLY • This set can be disassembled in the order shown below. 2-1-1. DISASSEMBLY FLOW 2-1-2. UPPER CASE (Page 2-1) 2-1-3. TRAY COVER ASSY 2-1-5. MAIN BOARD 2-1-6. AU-258 BOARD 2-1-7. POWER BLOCK...
  • Page 38: Tray Cover Assy

    2-1-3. TRAY COVER ASSY 1 Insert a clip in the hole of a drive and open a tray. 4 tray cover assy 3 two claws 2-1-4. BD DRIVE (SERVICE USE) 5 two screws 5 two screws 8 BD drive (service use) 7 connector 1 three claws 4 two screws...
  • Page 39: Main Board

    2-1-5. MAIN BOARD 8 six screws (BV3) 4 connector 9 MAIN board 5 two connectors 1 harness (MBD-003) 6 four screws (BV3) 7 screw (P3) 2 connector 3 connector 2-1-6. AU-258 BOARD 3 four screws (BV3) 1 connector 5 AU-258 board 2 three screws (BV3)
  • Page 40: Board

    2-1-7. POWER BLOCK 1 two connectors 2 connector 3 five screws (BV3) 4 power block 2-1-8. CIRCUIT BOARDS LOCATION AU-258 board MAIN board FL-176 board power block FR-271 board...
  • Page 41: Reassembly

    2-2. REASSEMBLY • This set can be assembled in the order shown below. 2-2-1. UPPER CASE 1 upper case 3 tapping screw 2 three screws 3 tapping screw 2-2-2. TRAY COVER ASSY 1 Insert a clip in the hole of a drive and open a tray.
  • Page 42: Bd Drive (Service Use)

    2-2-3. BD DRIVE (SERVICE USE) 4 two screws 4 two screws 1 BD drive (service use) 2 connector 8 three claws 5 two screws 6 connector 8 three claws 7 front panel assy 2-2-4. MAIN BOARD 2 six screws (BV3) 7 connector 1 MAIN board 6 two connectors...
  • Page 43: Fl-176 Board, Fr-271 Board

    2-2-5. FL-176 BOARD, FR-271 BOARD 1 FL-176 board 2 two screws 5 flexible flat cable (FLR-011) 4 two screws 3 FR-271 board 2-2-6. DC FAN 1 DC fan 3 connector 2 two screws...
  • Page 44 MEMO 2-8E...
  • Page 45: Block Diagrams

    BDP-S300/S301 SECTION 3 BLOCK DIAGRAMS 3-1. MAIN BLOCK DIAGRAM AUDIO (SEE PAGE 3-3) CN5701 MAIN BOARD 256MByte 128MByte (DB-BMB102) DDR 512Mbit DDR 512Mbit DRAM1 DRAM0 CN1802 BD-ROM ATAPI Parallel DIGITAL OUT DRIVE Flash 512Mbit (BDV-102SO) OPTICAL SPDIF1 COAXIAL 27MHz VIDEO OUT...
  • Page 46: Audio Block Diagram

    BDP-S300/S301 3-2. AUDIO BLOCK DIAGRAM AU-258 BOARD (SEE PAGE 4-5) ADATA5_1 ADATA5_2 DATA DATA ALRCK ALRCK LRCK LRCK ABCLK ABCLK BICK BICK Aout L- Aout L- MCLK MCLK MCLK MCLK IC011 IC010 IC008 IC007 AUDIO AUDIO DAC_XCS_2 DAC_XCS_2 X-MS X-MS DAC_XRST –...
  • Page 47: Fl/Fr Block Diagram

    BDP-S300/S301 3-3. FL/FR BLOCK DIAGRAM FL-176 BOARD (SEE PAGE 4-13) IC100 FL DRIVE ND100 S(1)-(16) FLUORESCENT SEG1 INDICATOR TUBE SEG16 COM(1)-(11) GRID2 GRID12 CN100 FR-271 BOARD LED_PON (SEE PAGE 4-17) FLDATA FLCLK FLSTB CN101 CN600 KEY0 KEY 0 S100 S600...
  • Page 48: Power 1 Block Diagram

    BDP-S300/S301 3-4. POWER 1 BLOCK DIAGRAM POWER BLOCK MAIN BOARD (DB-BMB102) CN202 CN6002 SW+12V SW+12V SW+3V SW+3V SW+5V SW+5V CN201 CN6051 SW+12V (A) SW+12V (A) SW-12V (A) SW-12V (A) EV+6V EV+6V SW+1.5V SW+1.5V P_ON P_ON Microcomputer ~AC IN CN102 FU101 CN5701 V–12A...
  • Page 49: Power 2 Block Diagram

    BDP-S300/S301 3-5. POWER 2 BLOCK DIAGRAM AU-258 BOARD (SEE PAGE 4-5) CN001 V-12A IC001 Q002 B- SWITCH REG. POWER 1 V+12A Q004 (SEE PAGE 3-8) B+ SWITCH V+3D Q005 SWITCH IC011 IC010 IC009 IC002 REG. IC003 REG. IC008 IC007 IC006...
  • Page 50: Power 3 Block Diagram

    BDP-S300/S301 3-6. POWER 3 BLOCK DIAGRAM FR-271 BOARD FL-176 BOARD (SEE PAGE 4-17) (SEE PAGE 4-13) CN101 CN100 CN600 IC601 POWER 1 V+5FL V+5E (SEE PAGE 3-8) REMOTO COMMANDER RECEIVER D601 (LED Blue) D603 IC100 HDMI FL DRIVE D604 D605...
  • Page 51: Power 4 Block Diagram

    BDP-S300/S301 SECTION 4 SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-1. FRAME SCHEMATIC DIAGRAM JA4101 VIDEO OUT VIDEO S VIDEO J001 JA4201 5.1CH OUTPUT AC-Inlet COMPONENT DIGITAL OUT J003 VIDEO OUT CN4501 JA5502 HDMI AUDIO REAR FRONT OPTICAL CENTER AC-259 JA5501...
  • Page 52 BDP-S300/S301 THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) • b: Pattern from the side which enables seeing. (The other layers’ patterns are not indicated) •...
  • Page 53: Printed Wiring Boards And Schematic Diagrams

    BDP-S300/S301 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS AU-258 (ANALOG AUDIO) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No. : AU-258 board; 1,000 series – • : Uses unleaded solder. • See page 2-4 for circuit boards location.
  • Page 54: Printed Wiring Board

    BDP-S300/S301 AU-258 BOARD (SIDE A) AU-258 (ANALOG AUDIO) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : AU-258 board; 1,000 series – IC004 H-11 IC006 : Uses unleaded solder.
  • Page 55 BDP-S300/S301 AU-258 BOARD (SIDE B) CN001 AUDIO OUT C033 R110 R084 C084 R083 R109 C120 R108 C056 Q002 R011 R138 IC009 Q019 IC001 R082 C081 R104 R105 R081 C119 R017 Q018 R103 R137 C035 R019 C C C R088 C088...
  • Page 56 BDP-S300/S301 FL-176 (FL/LED) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : FL-176 board; 2,000 series – : Uses unleaded solder. • See page 2-4 for circuit boards location.
  • Page 57 BDP-S300/S301 FL-176 (FL/LED) SCHEMATIC DIAGRAM • See page 4-11 for printed wiring board. – Ref. No. : FL-176 board; 2,000 series – ND100 FL-176 BOARD FLUORESCENT INDICATOR TUBE INDICATOR DRIVE -REF.NO.:2,000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE 10 11 12...
  • Page 58 BDP-S300/S301 FR-271 (SW/IR, INPUT/LED) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No. : FR-271 board; 2,000 series – : Uses unleaded solder. • See page 2-4 for circuit boards location.
  • Page 59: Fr-271 (Sw/Ir, Input/Led) Schematic Diagram

    BDP-S300/S301 FR-271 (SW/IR, INPUT/LED) SCHEMATIC DIAGRAM • See page 4-15 for printed wiring board. – Ref. No. : FR-271 board; 2,000 series – FR-271 BOARD LED DRIVE, FUNCTION KEY -REF.NO.:2,000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE S600 R606 CN600 1.8k...
  • Page 60 BDP-S300/S301 MEMO 4-20E...
  • Page 78 MEMO 5-18E...
  • Page 79: Repair Parts List

    X-2186-585-1 COVER ASSY, TRAY (S300BM/S301BM) 2-686-188-02 PLATE, BD INDICATION A001 1-479-848-41 REMOTE COMMANDER (RMT-B101A) (S300BM: E32) 4-942-568-41 EMBLEM (NO.5), SONY A001 1-480-207-21 REMOTE COMMANDER (RMT-B101P) 3-070-883-71 SCREW, TAPPING (S300BM: AEP, UK, RUS, SP, TH, AUS) A-1267-558-A CASE BLOCK ASSY (SERVICE USE SKZ)
  • Page 80: Main Chassis Block

    6-1-2. MAIN CHASSIS BLOCK not supplied not supplied not supplied not supplied (FL-176 board) not supplied main block not supplied (FR-271 board) Note: Please install it when Ref. No. 58 or 59 parts have not adhered when drive is exchanged. Please refer The components identified by Les composants identifiés par une to SERVICE NOTE for the installation method.
  • Page 81: Main Block

    6-1-3. MAIN BLOCK not supplied (AU-258 board) not supplied not supplied not supplied not supplied not supplied not supplied The components identified by mark 9 contain confidential information. Note: Please install it when Ref. No. 109 part have not adhered Strictly follow the instructions whenever the components are repaired when drive is exchanged.
  • Page 82: Electrical Parts List

    AU-258 6-2. ELECTRICAL PARTS LIST NOTE: The components identified by mark • Due to standardization, replacements in the • Items marked “*” are not stocked since they 0 or dotted line with mark 0 are parts list may be different from the parts speci- are seldom required for routine service.
  • Page 83 AU-258 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C134 1-136-165-00 FILM 0.1uF R011 1-216-833-11 METAL CHIP 1/10W C137 1-162-927-11 CERAMIC CHIP 100PF C138 1-162-927-11 CERAMIC CHIP 100PF R012 1-216-833-11 METAL CHIP 1/10W C139 1-162-927-11 CERAMIC CHIP 100PF R017 1-216-833-11 METAL CHIP...
  • Page 84 AU-258 FL-176 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R140 1-208-774-11 METAL CHIP 0.5% 1/10W D105 8-719-036-94 DIODE RD5.6SB-T1 R141 1-208-774-11 METAL CHIP 0.5% 1/10W < FUSE > R142 1-208-774-11 METAL CHIP 0.5% 1/10W R143 1-208-822-11 METAL CHIP 0.5% 1/10W...
  • Page 85 FL-176 FR-271 MAIN POWER BLOCK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > S100 1-771-410-21 SWITCH, TACTILE (I/1) < TRANSFORMER > 0 T100 1-445-229-11 TRANSFORMER, DC-DC CONVERTER ************************************************************ ************************************************************ FR-271 BOARD, COMPLETE (Ref. No. 2000 Series) ********************** 1-474-057-41 POWER BLOCK (ZSSR641GA) <...
  • Page 86 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-834-539-11 CORD, POWER (S300BM: TH) 3-196-787-11 MANUAL, INSTRUCTION (ENGLISH) (S300BJ: CND/S300BJP/S301BJ) 3-196-787-21 MANUAL, INSTRUCTION (FRENCH) (S300BJ: CND) 3-212-651-11 MANUAL, INSTRUCTION (ENGLISH) (S300BJ: US) 3-214-290-11 MANUAL, INSTRUCTION (ENGLISH) (S300BM: US, CND/S301BM) 3-214-290-21 MANUAL, INSTRUCTION (FRENCH) (S300BM/S301BM: CND) 3-214-800-11 MANUAL, INSTRUCTION (ENGLISH)
  • Page 87 BDP-S300/S301 Sony Corporation 2007G0500-1 9-883-948-22 Home Electronics Network Company © 2007.7 – 102 – Published by Quality Assurance Dept.
  • Page 88: Revision History

    BDP-S300/S301 REVISION HISTORY Ver. Date Description of Revision 2007.06 2007.07 Addition of AEP, UK, E, Russian, Australian, Singapore and Thai Models.

This manual is also suitable for:

Bdp-s301

Table of Contents