Makita HP2050 Instruction Manual
2-speed
Hide thumbs
Also See for HP2050:
- User manual ,
- Instruction manual (57 pages) ,
- Technical information (17 pages)
Related Manuals for Makita HP2050
Summary of Contents for Makita HP2050
- Page 1 INSTRUCTION MANUAL 2-Speed Hammer Drill HP2050 HP2050F HP2051 HP2051F 002989 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
EC Declaration of Conformity have reached the end of their life must Makita Corporation responsible be collected separately and returned to manufacturer declare that the following Makita environmentally compatible machine(s): recycling facility. Designation of Machine: ENE039-1... -
Page 3: General Power Tool Safety Warnings
Tomoyasu Kato If operating a power tool in a damp location is Director unavoidable, use a ground fault circuit Makita Corporation interrupter (GFCI) protected supply. Use of an 3-11-8, Sumiyoshi-cho, GFCI reduces the risk of electric shock. Anjo, Aichi, JAPAN Personal safety 10. -
Page 4: Specific Safety Rules
19. Disconnect the plug from the power source Always be sure you have a firm footing. and/or the battery pack from the power tool Be sure no one is below when using the tool in before making any adjustments, changing high locations. -
Page 5: Speed Change
for lower speed. Speed change Lighting up the lamps 1. Arrow 2. Speed change For Model HP2050F, HP2051F knob 1. Lamp 002691 Two speed ranges can be preselected with the speed 002689 change knob. To change the speed, turn the speed change knob so CAUTION: that the arrow on the tool body points toward the "I"... -
Page 6: Depth Gauge
Then tighten the grip by turning clockwise at the desired position. It may be swung 360° so as to be secured at any position. Installing or removing drill bit For Model HP2050, HP2050F 1. Chuck key 002696 The depth gauge is convenient for drilling holes of uniform depth. -
Page 7: Maintenance
Always secure small workpieces in a vise or similar • If you need any assistance for more details regarding hold-down device. these accessories, ask your local Makita Service Center. When drilling in wood, metal or plastic materials, turn the Tungsten-carbide tipped hammer bit •... - Page 8 Makita Corporation Anjo, Aichi, Japan 884428E224...