Fujitsu ETERNUS DX100 S3 Setup Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Storage
  5. ETERNUS DX100 S3
  6. Setup manual

Fujitsu ETERNUS DX100 S3 Setup Manual

All flash array
Show thumbs Also See for ETERNUS DX100 S3:
1
2
3
4
5
6
7
8
Table Of Contents
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
Table of Contents

Quick Links

See also: Basic Operation Manual , Configuration Manual
P2X0-1250-06ENZ0
FUJITSU Storage
ETERNUS DX
Configuration Guide (Web GUI)
ETERNUS DX100 S3/DX200 S3,
ETERNUS DX500 S3/DX600 S3
Disk storage systems,
ETERNUS DX200F
All Flash Array
Table of Contents
loading

Related Manuals for Fujitsu ETERNUS DX100 S3

Summary of Contents for Fujitsu ETERNUS DX100 S3

  • Page 1 P2X0-1250-06ENZ0 FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array...
  • Page 2 This page is intentionally left blank.

  • Page 3: Structure Of This Manual

    DX100 S3/DX200 S3 Disk storage system, the FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage sys- tem, and the FUJITSU Storage ETERNUS DX200F All Flash Array (hereinafter referred to as "GUI"). It should be referred to when setting up and configuring environment of the ETERNUS DX100 S3/DX200 S3 Disk storage system, the ETERNUS DX500 S3/DX600 S3 Disk storage system, and the ETERNUS DX200F All Flash Array (hereinafter referred to as "ETERNUS DX"...
  • Page 4 ETERNUS Web GUI User's Guide (Settings) FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array • ETERNUS CLI User's Guide FUJITSU Storage ETERNUS DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3 Disk storage systems, ETERNUS DX200F All Flash Array •...
  • Page 5 ETERNUS DX storage systems. For basic settings that are not described in this FUJITSU Storage ETERNUS DX manual, refer to "FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage sys- Configuration Guide (Web GUI) tem Configuration Guide (Basic)", "FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)", or the "FUJITSU Storage ETER-...

  • Page 6: Naming Conventions

    Microsoft® Windows Server® 2008 R2 HPC Edition Microsoft® Windows Server® 2012 Datacenter Microsoft® Windows Server® 2012 Standard Windows Server 2012 Microsoft® Windows Server® 2012 Essentials Microsoft® Windows Server® 2012 Foundation FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 7 ETERNUS Disk storage system models The following naming conventions describe ETERNUS Disk storage system models in this manual. ETERNUS Disk storage system model Naming conventions ETERNUS DX100 S3/DX200 S3 Disk storage system, storage system ETERNUS DX500 S3/DX600 S3 Disk storage system, ETERNUS DX...
  • Page 8 Note that the screen shots in this manual were captured during development of the software and the actual screens may be different. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 9: Table Of Contents

    When Using SnapOPC+ (SDVs and SDPVs) ................. 53 When Using Thin Provisioning Volumes (TPVs) ..............54 4.4.1 Set Thin Provisioning ............................. 55 4.4.2 Create Thin Provisioning Pool ........................56 4.4.3 Create Volume ............................... 63 FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 10 Required Settings for the Key Management Function .................. 107 Appendix A Installing the Security Certificate For Internet Explorer......................111 For Firefox........................118 Appendix B Structures for Host Connection Appendix C Estimated Advanced Copy Source Capacity FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 11 Figure 7.1 Relation between the ETERNUS DX S3 series and the key server ............... 110 Figure B.1 Basic concept of host connection (when using host groups) ..............124 FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 12: Chapter 1 Outline

    *1: Connect the operation server and the ETERNUS DX with one of the following cables: Fibre Channel (FC) cable LAN cable SAS cable (available only for the ETERNUS DX100 S3/DX200 S3) Refer to "Chapter 2 Startup and Shutdown" (page 19) for details of GUI start up.

  • Page 13: Features

    ● Easy operation If a hardware failure is detected, the system administrator can receive a mail containing detected failure information. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 14: Notes For Using Gui

    Do not use the standard buttons of each browser (for example, the [Back] button, the [Forward] button, and the [Refresh] button), the [F5] (refresh) key, or the [Back Space] (back) key. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 15: Operating Environment

    The SmartScreen Filter function must be disabled. If the SmartScreen Filter function is enabled, click the [Custom Level] button under the Internet Options Security tab and disable [Use SmartScreen Filter]. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 16 On the Internet Options Advanced tab, scroll to Security, and select [Use SSL3.0] or [Use TLS1.0]. • On the Internet Options Advanced tab, scroll to Security, and clear the [Do not save encrypted pages to disk] checkbox. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 17: User Management

    ■ Guide of Initial User Accounts for Fujitsu Maintenance Engineers Fujitsu would like to thank you for purchasing our products. The following initial user accounts are available at factory default settings: • root (Admin user role, system administrator privilege) •...

  • Page 18: Screen Operations

    For details about the GUI screen structures and basic operations (such as filter settings and updating the screen display), refer to "Screen Operations" in "ETERNUS Web GUI User's Guide (Operation)". FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 19: Chapter 2 Startup And Shutdown

    Connect the PC and the ETERNUS DX using a LAN cable, and display the login screen via the web browser. The procedure to start up the login screen for GUI is as follows: ■ For ETERNUS DX100 S3/DX200 S3 and ETERNUS DX200F Procedure Directly connect the PC and RMT port of the ETERNUS DX via LAN cable.
  • Page 20 Refer to "Register SSL Certificate" in "ETERNUS Web GUI User’s Guide (Settings)" for details. Refer to "Create Self-signed SSL Certificate" in "ETERNUS Web GUI User’s Guide (Settings)" for details. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 21: Login

    • When applying controller firmware • When applying disk firmware • When performing the RAID group diagnosis • When performing the disk diagnosis FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 22  The operation screen appears. If the input error occurs, enter the User ID and Password again to log in to the ETERNUS DX. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 23: Logout

    Click the [Logout] link on the top right of the screen.  A confirmation screen appears. Click the [OK] button.  This completes the logging out process. The login screen appears. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 24: Exit From Gui

    The procedure to exit is as follows: Procedure Click the [Close] button for the web browser.  Exit from GUI. The login screen does not appear. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 25: Initial Setup

    [Initial Setup 2] wizard is displayed. For users without the required polices, the [Overview] screen is displayed at the first login. • The settings made in the Initial Setup can be changed individually later. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 26: Initial Setup 1

    Log out when the settings are complete. Log in again, and then proceed to "3.2 Initial Setup 2" (page 35). If SED has been installed before registering the SED authentication key, reboot the ETERNUS DX before logging in again. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 27 Click [Initial Setup] in [Action]. The [Initial Setup] screen is displayed after logging in for the first time. Click the [Next >>] button.  Initial Setup starts. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 28 Click the [Next >>] button  A confirmation screen appears. Click the [OK] button.  Setting of the storage system name starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 29 Click the [Skip] button to proceed to the next screen without setting. Click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  Changing of the password starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 30 Click the [Skip] button to proceed to the next screen without setting. Click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  The Thin Provisioning setting starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 31 Proceed to [Register Advanced Copy License]. Specify the parameters. The main setting items are as follows. Registration Method (only for the ETERNUS DX100 S3/DX200 S3 and the ETERNUS DX200F) License Key • When using ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express, refer to the documents that are supplied with ETERNUS SF AdvancedCopy Manager or ETERNUS SF Express.
  • Page 32 Click the [Skip] button to proceed to the next screen without setting.  A confirmation screen appears. Click the [OK] button.  SED Authentication Key registration starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 33 Click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  Setting of the network environment starts. Click the [Finish] button.  A completed screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 34 Restart the browser, and wait a few minutes before logging into the GUI again. After logging in again, continue with the initial setup. Proceed to Initial Setup 2. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 35: Initial Setup 2

    Set the E-mail notification for events that occur in the ETERNUS DX. (9) Setup Syslog Set the external servers (Syslog server) for sending logs of events that are detected by the ETERNUS DX. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 36 If all of the settings of Initial Setup 2 are not performed, click the [All Skip] button to exit the Initial Setup wizard. Click the [Next >>] button.  Initial Setup restarts. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 37 ETERNUS DX is successfully connected to the NTP server, start this function again and check "Access Status" in the "NTP Settings" field.  Setting of the date and time starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 38 Click the [Skip] button to proceed to the next screen without setting. Click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  Setting of the SNMP Agent basic starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 39 Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. The main setting items are as follows. IP Version Manager IP Address (IPv4) Manager IP Address (IPv6) FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 40 When the IP addresses are set, click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  Setting of the SNMP Manager starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 41 Click the [Add] button. Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. The main setting items are as follows. View Name Subtree FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 42 When the setting of the MIB Access Views is complete, click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  Setting of the SNMP Agent MIB Access View starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 43 SNMP Agent and SNMP Agent Manager. Click the [Add] button. Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 44 When the setting of the user information is complete, click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  The SNMP Agent User setting starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 45 SNMP Agent and SNMP Manager. The SNMP Agent Community setting is not necessary when using SNMPv3 only. Click the [Add] button. Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 46 When the setting of the community is complete, click the [Next >>] button.  A confirmation screen appears. Click the [OK] button.  The SNMP Agent Community setting starts. Click the [Done] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 47 Click the [Skip] button to proceed to the next screen without setting. Specify the parameters. The main setting items are as follows. Manager No. SNMP Version Community Name User Name Port No. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 48  A confirmation screen appears. Click the [OK] button.  The SNMP Agent Trap setting starts. Click the [Done] button. Proceed to [Setup E-Mail Notification]. 10-1 Specify the parameters. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 49 Click the [Skip] button to proceed to the next screen without setting. 11-2 Click the [Next >>] button.  A confirmation screen appears. 11-3 Click the [OK] button.  The Syslog setting starts. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 50 Click the [Done] button.  A completed screen appears. Click the [Finish] button.  Initial Setup 2 is complete, and the [Overview] screen appears. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 51: Chapter 4 Configuration Settings For Raid Groups Or Thin Provisioning

    Thin Provisioning enables operations to be started with less drive capacity even if the capacity require- ments cannot be estimated. Thin Provisioning Volumes (TPVs) are created in Thin Provisioning Pools. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 52: When Using Standard Volumes

    RAID in the ETERNUS DX Create a RAID group ( Refer to: "RAID Group Creation" in "FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)" "RAID Group Creation" in "FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)"...

  • Page 53: When Using Snapopc+ (Sdvs And Sdpvs)

    RAID in the ETERNUS DX Create a RAID group ( Refer to: "RAID Group Creation" in "FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)" "RAID Group Creation" in "FUJITSU Storage ETERNUS DX500 S3/DX600 S3 Disk storage system Configuration Guide (Basic)"...

  • Page 54: When Using Thin Provisioning Volumes (Tpvs)

    Create a volume (physical drive area in the Thin Provisioning Pool). A volume is a structural unit of a Thin Provisioning Pool that can be recognized from the server. Select "Thin Provisioning" for "Type". Refer to: Create Volume FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 55: Set Thin Provisioning

    Set Thin Provisioning This function enables the Thin Provisioning function. Note that the Thin Provisioning function is not provided for the ETERNUS DX100 S3 1CM model. In addition, the "Thin Provisioning" navigation is not displayed for this model. The procedure to enable the Thin Provisioning function is as follows: Procedure Click [Set Thin Provisioning] in [Action].

  • Page 56: Create Thin Provisioning Pool

    Flexible Tier Pools (FTRPs) that can be created in the ETERNUS DX. There are two methods to create a TPP; automatic drive selection and manual drive selection. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 57  The [Create Thin Provisioning Pool] screen appears. Select "Automatic" for the create mode and specify the other parameters. The main setting items are as follows. ● New Thin Provisioning Pool • Name FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 58 Number of member drives High Performance (RAID1+0) 4, 8, 16, 24 High Capacity (RAID5) 4, 5, 8, 9, 13 High Reliability (RAID6) 6, 8, 10 Mirroring (RAID1) Striping (RAID0) FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 59 (striping multiple drives) divided into two or more lines (for the ETERNUS DX500 S3/DX600 S3). The procedure to create a TPP by selecting drives manually is as follows: Procedure Click [Create] in [Action].  The [Create Thin Provisioning Pool] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 60 New Thin Provisioning Pool • Name ● Manual Setting • Drive Type • RAID Level • Alarm Click the [Add] button.  The [Add RAID Group] screen is displayed. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 61 Click the [RAID Level] link to change the Controlling CM and configuration drives of the RAID group. • Click the [Delete] button to delete a RAID group. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 62  A confirmation screen appears. Click the [OK] button.  Create Thin Provisioning Pool starts. Click the [Done] button to return to the [Thin Provisioning Pool] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 63: Create Volume

    The procedure to create TPVs by selecting destinations automatically is as follows: Procedure Click [Create] in [Action].  The [Create Volume] screen appears. Select "Automatic" for "RAID Group/TPP Selection". FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 64 Click the [Create] button.  A confirmation screen appears. Click the [OK] button.  TPV creation starts. Click the [Done] button to return to the [Volume] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 65 TPP in which the volumes are to be created. The main setting items are as follows. ● New Volume • Name • Capacity • Type FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 66 Click the [Create] button.  A confirmation screen appears. Click the [OK] button.  TPV creation starts. Click the [Done] button to return to the [Volume] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 67: Chapter 5 Host Interface Management

    Create a CA port group (a group of CA ports that are connected to the specified host group) that is used for the server to access the ETERNUS DX. Refer to: Create CA Port Groups FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 68 Create Host Affinity Set CA Reset Group Set member ports for a CA reset group to reduce the effect when ports become inaccessible. Refer to: Modify CA Reset Group FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 69: Add Lun Group

    The procedure to create a LUN group is as follows: Procedure Click [Add LUN Group] in [Action].  The [Add LUN Group] screen appears. Specify the LUN group name. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 70 Click the [OK] button.  Returns to the [Add LUN Group] screen. Repeat Step 3 through Step 5 to set multiple allocation information between the LUNs and the volumes. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 71  A confirmation screen appears. Click the [OK] button.  Adding LUN group starts. Click the [Done] button to return to the [LUN Group] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 72: Modify Port Parameters

    Select which FC port to set the parameters for (multiple selections can be made) and click [Configure FC Port] in [Action].  The [Modify FC Port Parameters] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 73 ■ When the port mode is "CA" The main setting items are as follows. ● Port Settings • Port • Connection • Set Loop ID • Loop ID • Transfer Rate FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 74 The main setting items are as follows. ● Port Settings • Port • Connection • Set Loop ID • Loop ID • Transfer Rate ■ When the port mode is "Initiator" FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 75 Click the [OK] button.  Setting of the FC port parameters starts. Click the [Done] button to return to the [FC Port] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 76: Modify Iscsi Port Parameters

    Multiple ports can be set with the same or with different parameters in a single operation. To set parameters to multiple ports, select the target ports and specify the parameters for each port. After the specification is complete, click the [Modify] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 77 IP Version IP Address Subnet Mask Gateway IPv6 Link Local Address IPv6 Connect IP Address IPv6 Gateway TCP Port No. TCP Window Scale VLAN ID Jumbo Frame FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 78 Jumbo Frame ■ When the port mode is "RA" When the type is "1G iSCSI" or "10G iSCSI" and the port mode is "RA", specify the following items: FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 79 IPv6 Link Local Address IPv6 Connect IP Address IPv6 Gateway TCP Port No. TCP Window Scale VLAN ID • Security Setting CHAP CHAP User ID New Password Confirm new Password FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 80 TCP/IP Settings IP Version IP Address Subnet Mask Gateway IPv6 Link Local Address IPv6 Connect IP Address IPv6 Gateway TCP Port No. TCP Window Scale VLAN ID FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 81 TCP Window Scale Jumbo Frame ■ [Send ping] Screen Checks the connection status between the target port and the destination storage system. The main setting items are as follows. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 82  A confirmation screen appears. Click the [OK] button.  Modification of the iSCSI port parameters starts. Click the [Done] button to return to the [iSCSI Port] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 83: Modify Sas Port Parameters

    Multiple ports can be set with the same or with different parameters in a single operation. To set parameters to multiple ports, select the target ports and specify the parameters for each port. After the specification is complete, click the [Modify] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 84  A confirmation screen appears. Click the [OK] button.  Modification of the SAS port parameters starts. Click the [Done] button to return to the [SAS Port] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 85: Modify Fcoe Port Parameters

    Multiple ports can be set with the same or with different parameters in a single operation. To set parameters to multiple ports, select the target ports and specify the parameters for each port. After the specification is complete, click the [Modify] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 86  A confirmation screen appears. Click the [OK] button.  Modification of the FCoE port parameters starts. Click the [Done] button to return to the [FCoE Port] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 87: Create Ca Port Groups

    The procedure to create an FC port group is as follows: Procedure Click [Create FC Port Group] in [Action].  The [Create FA Port Group] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 88 Click the [OK] button.  Registration of the FC port group starts. Click the [Done] button to return to the [CA Port Group] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 89: Set Host Response

    For details about the recommended patterns of host responses, refer to "Add Host Response" in "ETERNUS Web GUI User’s Guide (Settings)". For details on assigning an appropriate host response, refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-". For details on modifying the host response settings, refer to "Add Host Response"...

  • Page 90: Add Host Groups

    The total number of hosts irrespective of the interface types. To assign an appropriate host response to a created host group, refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-" for each OS type. The host response configures the operation mode that is appropriate for the host.
  • Page 91 Input a host group name to be created, and select a host response to be assigned to the host group. The main setting items are as follows. ● Host Group Setting • Host Group Name • Host Response FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 92 ETERNUS DX. If there is no error in the connection environment, contact the Support Department, or specify the WWN manually. Click the [Add] button.  A confirmation screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 93 The main setting item is as follows. ● Host Setting Click the [OK] button.  Returns to the [Manual Input] screen. Repeat Step (2) through Step (4) to set more WWNs. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 94  Registration of the FC host group starts. Click the [Done] button to return to the [Host Group] screen. Click the [Continue] button to continue adding FC host groups. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 95: Create Host Affinity

    The procedure to create a host affinity when the target connection is "Host Group - CA Port Group" is as follows: Procedure Click [Create Host Affinity] in [Action].  The [Create Host Affinity] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 96 ■ When "Host Group" is selected Select a host group to configure a host affinity, and click the [OK] button.  The display returns to the initial screen. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 97 "All" is displayed in "All (host response name)" format.  The display returns to the initial screen. Click the [Browse...] button for the CA port group.  The [Select CA Port Group] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 98 The CA port is used in the CA port group The CA port group is used by another host affinity Click the [Browse...] button for the LUN group.  The [Select LUN Group] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 99 To edit the path between a host and a CA port, click the [Edit] button for the path to be edited.  The [Select CA Port] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 100 Click the [OK] button. Confirm the host affinity setting and the path between the host and the CA port, click the [Create] button.  A confirmation screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 101 5.6 Create Host Affinity Click the [OK] button.  The host affinity creation starts. Click the [Done] button to return to the [Connectivity] screen. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 102: Modify Ca Reset Group

    All the ports are configured in one reset group in the initial setting. It is not necessary to change the setting for normal use. For details on changing the CA reset group according to instructions in "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-", refer to "Modify CA Reset Group" in "ETERNUS Web GUI User's Guide (Settings)".

  • Page 103: Chapter 6 Settings For The Advanced Copy Environment

    REC Buffer setting Modify REC Buffer REC Disk Buffer setting Create REC Disk Buffer REC Disk Buffer allocation Assign REC Disk Buffer REC multiplicity setting Modify REC Multiplicity FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 104 (2) Copy path setting Set the Copy path information between local and remote devices. (3) REC Buffer setting Set the transfer buffer when performing REC in asynchronous consistency mode. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 105: Copy Session Management

    For REC sessions, checking copy path and buffer status are also available. Refer to "Copy Path" and "REC Buffer" in "ETERNUS Web GUI User’s Guide (Operation)" for details. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 106: Required Settings For The Advanced Copy Function (Odx)

    Disable the ODX function. Refer to "Disable ODX" in "ETERNUS Web GUI User's Guide (Settings)" for details. Reboot any servers that are connected to the ETERNUS DX. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 107: Chapter 7 System Environment Settings

    RAID groups that use the common key and RAID groups that use the key in the key server (RAID groups that are registered in the key group) can be used in the same storage system. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...
  • Page 108 Refer to "Import SSL/KMIP Certificate" in "ETERNUS Web GUI User's Guide (Settings)". For details on how to export the SSL/KMIP certificate, refer to the manuals of the key management soft- ware "ETERNUS SF KM". FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 109 "Normal", communication between the ETERNUS DX S3 series and the key server has been successfully established. Refer to "Key Group" in "ETERNUS Web GUI User's Guide (Operation)". FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 110: Figure 7.1 Relation Between The Eternus Dx S3 Series And The Key Server

    The ETERNUS DX S3 series obtains the key from the key server by using the "Storage System Group Name", "Key Management Machine Name", and "Key Group Name" as the password. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 111: Appendix A Installing The Security Certificate

    "Trusted Sites". Procedure Enter the IP address for the storage system in the address bar of the web browser.  A confirmation screen for security certificate appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 112 A.1 For Internet Explorer Click the [Continue to this website (not recommended)] link.  The login screen for GUI is displayed. Click the "Certificate Error".  A warning message appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 113  The site certificate information appears. Click the [Copy to File...] button on the [Details] tab.  The [Certificate Export Wizard] screen appears. Click the [Next >] button. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 114 Select the file name that is to be exported, and then click the [Next >] button. Click the [Finish] button.  The information of the exported certificate is displayed. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 115 To accept only the currently logged in user with the current PC, select "Current User". To accept other users that log in with the current PC, select "Local Machine". FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...
  • Page 116 "Certificate Import Wizard", an error may occur in the security certificate according to the customer environment. Select the "Trusted Root Certification Authorities", and click the [OK] button. Click the [Finish] button.  The [Security Warning] dialog box appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 117 After clicking the [No] button, the operation may not be continuable. If this occurs, restart the web browser.  The completion screen appears. Click the [OK] button.  The security certificate is installed. Restart the web browser. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 118: For Firefox

    Enter the IP address for the storage system in the address bar of the web browser.  A confirmation screen for security certificate appears. Click the "Or you can add an exception..." link. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 119 Appendix A Installing the Security Certificate A.2 For Firefox Click the [Add Exception...] button.  The [Add Exception] screen appears. Click the [Get Certificate] button.  The status of certificate is displayed. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 120  The [Certificate Viewer] screen appears. Click the [Export...] button on the [Details] tab. Specify the file name and save the certificate.  Returns to the [Add Security Exception] screen. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 121 Specify "https ://IP address of the storage system" (Default IP address is "192.168.1.1"). Select [Tools]  [Options]  [Advanced], and click the [View Certificates] button on the [Encryption] tab.  The [Certificate Manager] screen appears. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 122 Specify the file name and save the certificate.  The [Add Security Exception] screen appears. Click the [Confirm Security Exception] button.  The security certificate is installed. Restart the web browser. End of procedure FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 123: Appendix B Structures For Host Connection

    In addition, by configuring the groups of hosts (HBAs) and ports that access the same LUN group, GUI operation can be simplified. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED...

  • Page 124: Figure B.1 Basic Concept Of Host Connection (When Using Host Groups)

    Host B - HBA1 Default Host B - HBA2 Host Group C Host C - HBA1 Default Host C - HBA2 Host D - HBA1 Host D - HBA2 FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 125 In setting example No.4, the "CA port group Y" for which "All" is selected cannot be used for setting host affinity with the specified host group (setting examples No.3 and No.4 cannot be configured in the same environment). FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...

  • Page 126: Appendix C Estimated Advanced Copy Source Capacity

    (4092.9) (8185.8) (16371.5) (4GB)) (Using 1TB=1,024GB Decimals rounded off at the second place) REC is available for the ETERNUS DX200 S3/DX500 S3/DX600 S3 and the ETERNUS DX200F. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 127 (8179.5) (4GB)) (Using 1TB=1,024GB Decimals rounded off at the second place) The copy source capacity is assumed that almost 100% of the copy table size is used. FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI) Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0...
  • Page 128 However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.

This manual is also suitable for:

Eternus dx200 s3Eternus dx500 s3Eternus dx600 s3

Table of Contents