Fujitsu ETERNUS DX200F Setup Manual
All flash array
Hide thumbs
Also See for ETERNUS DX200F:
- Configuration manual (142 pages) ,
- Operation manual (48 pages) ,
- User manual (1082 pages)
Table of Contents
Quick Links
See also:
Configuration Manual, Operating Manual
FUJITSU Storage
ETERNUS DX200F All Flash Array
Preparation
STEP
An installation space and network environment must be prepared in advance.
Prepare the following manuals:
●
Manuals for the ETERNUS DX200F All Flash Array
●
Related manuals, such as manuals for the server or the networking equipment that is used
Installation Space
Site Planning Guide
Installation space
Check that the installation area meets the space requirements of the rack in which the ETERNUS DX200F All Flash
Array (hereafter referred to as "ETERNUS DX") is to be installed.
Environmental considerations for installation
Check if the installation area for the ETERNUS DX meets the environmental conditions and installation environment
conditions.
Power outlets
Check the type and the number of power outlets/sockets that are required to install the ETERNUS DX.
Network Environment
Configuration Guide (Basic)
•
Configuration Guide (Web GUI)
•
Completing and attaching the Network Settings label
Write down the IP address for the ETERNUS DX on the Network Settings label and attach it inside the rack.
Settings for the PC
●
Setup Network Environment
-
IP address : 192.168.1.2
-
Subnet mask : 255.255.255.0
●
Set the Web browser
Refer to "Configuration Guide (Web GUI)" for details on the settings that are required.
Setup Guide
Setup Guide
P3AM-8482-01ENZ0
Table of Contents
Related Manuals for Fujitsu ETERNUS DX200F
Summary of Contents for Fujitsu ETERNUS DX200F
- Page 1 Installation Space Site Planning Guide Installation space Check that the installation area meets the space requirements of the rack in which the ETERNUS DX200F All Flash Array (hereafter referred to as "ETERNUS DX") is to be installed. Environmental considerations for installation Check if the installation area for the ETERNUS DX meets the environmental conditions and installation environment conditions.
-
Page 2: Installation In A Rack
Flange cover M5 screws Flange cover Make sure to install or remove the controller enclosure to or from a rack with two or more people. IMPORTANT FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 3: Cable Connection
Power Cords Connect the power cords to the inlets of the power supply unit. Use release ties to hold the power cords in place. Cable Rear view FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 4: Basic Setup
To change the user interface language, click the [Option] button and select "English" or "Japanese" in "Language". Enter the Username and Password. User name: root Password: root (by default) After logging in, the Initial Setup screen of ETERNUS Web GUI appears. FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 5: Initial Setup
ETERNUS DX Discovery function is enabled for the MNT port. Make sure to set up the network environment and disable the ETERNUS DX Discovery function. FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 6: Raid Configuration Settings
Select the RAID group that is used as the Dedicated Hot Spare and click the [Assign] button. In the confirmation screen that appears, click the [OK] button. FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 7: Host Affinity Settings
(LUN group). To display the screen to add a LUN group: Click [Add LUN Group] in [Action] under [LUN Group] in [Category] on the [Connectivity] tab. FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 8: Monitoring Setup
After the server connection setup, confirm that the volumes in the ETERNUS DX can be recognized by the server. All necessary settings are complete, and the ETERNUS DX is now ready for normal operation. Configuration Guide (Basic) • Configuration Guide -Server Connection- • FUJITSU Storage ETERNUS DX200F All Flash Array Setup Guide P3AM-8482-01ENZ0 Copyright 2014 FUJITSU LIMITED... -
Page 9: Operation And Maintenance
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. • Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information in this manual.