Sony HCD-GN700 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Hi Fi Component
  5. HCD-GN700
  6. Service manual

Sony HCD-GN700 Service Manual

Mini hi-fi component system
Hide thumbs Also See for HCD-GN700:
Table of Contents

Quick Links

See also: Service Manual
HCD-GN700/GX8800
SERVICE MANUAL
Ver 1.0 2003.04
HCD-GN700/GX8800 are the amplifier,
CD player, tape deck and tuner section
in MHC-GN700/GX8800.
AUDIO POWER SPECIFICATIONS
(MHC-GX8800 USA model only)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 6-ohm loads, both channels driven, from 120 Hz – 10 kHz; rates
200 watts per channel minimum RMS power, with no more than 10%
total harmonic distortion from 250 miliwatts to rated output.
Amplifier section
MHC-GX8800
Total harmonic distortion
Less than 0.1%
(6 ohms at 1 kHz, 100 W)
MHC-GN700
The following are measured at AC 127V, 60 Hz (Mexican model only)
The following are measured at AC 120, 220, 240V 50/60 Hz
(except Mexican model)
DIN power output (rated)
160 + 160 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
200 + 200 watts
(6 ohms at 1 kHz, 10% THD)
Inputs
GAME (VIDEO):
1 Vp-p, 75 ohms
(phono jack)
GAME (AUDIO):
Voltage 250 mV,
(phono jacks)
impedance 47 kilohms
MD/VIDEO (AUDIO) IN:
voltage 450 mV/250 mV,
(phono jacks)
impedance 47 kilohms
MIC:
sensitivity 1 mV,
(phone jack)
impedance 10 kilohms
Sony Corporation
9-877-280-01
2003D0200-1
Home Audio Company
C 2003.04
Published by Sony Engineering Corporation
Photo: HCD-GN700
Model Name Using Similar Mechanism
CD Mechanism Type
CD
Section
Base Unit Name
Optical Pick-up Name
Model Name Using Similar Mechanism
TAPE
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Outputs
VIDEO OUT:
(phono jacks)
PHONES:
(stereo mini jack)
FRONT SPEAKER:
SURROUND SPEAKER:
CD player section
System
Laser
Laser Output
Frequency response
Wave length
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wave length
Output Level
MiNi Hi-Fi COMPONENT SYSTEM
US Model
HCD-GX8800
E Model
HCD-GN700
NEW
CDM74-K6BD47S
BU-K6BD47S
KSM-213DCP
HCD-XGR66/XGR600
CWM43RR23
max. output level 1 Vp-p,
unbalanced, Sync.
negative load impedance 75 ohms
accepts headphones of
8 ohms or more
accepts impedance of 6 to 16 ohms
accepts impedance of 24 ohms or more
Compact disc and digital audio system
Semiconductor laser
(λ=795nm)
Max. 44.6 µW*
*This output is the value measured at a
distance of 200 mm from the objective
lens surface on the Optical Pick-up
Block with 7 mm aperture.
2 Hz – 20 kHz (±0.5 dB)
795 nm
660 nm
–18 dBm
– Continued on next page –
Table of Contents
loading

Related Manuals for Sony HCD-GN700

Summary of Contents for Sony HCD-GN700

  • Page 1 HCD-GN700/GX8800 SERVICE MANUAL US Model HCD-GX8800 Ver 1.0 2003.04 E Model HCD-GN700 HCD-GN700/GX8800 are the amplifier, CD player, tape deck and tuner section in MHC-GN700/GX8800. Photo: HCD-GN700 Model Name Using Similar Mechanism CD Mechanism Type CDM74-K6BD47S Section Base Unit Name...
  • Page 2 This appliance is classified as Recording system 4-track 2-channel stereo a CLASS 1 LASER product. Frequency response 50 – 13,000 Hz (±3 dB), using Sony The CLASS 1 LASER TYPE I cassette PRODUCT MARKING is located on the rear exterior.

  • Page 3: Table Of Contents

    HCD-GN700/GX8800 TABLE OF CONTENTS SERVICING NOTES 7-14. Schematic Diagram – Display Board – ......43 ..........4 7-15. Printed Wiring Board – Power Amp Board – ....44 7-16. Schematic Diagram – Power Amp Board – ....45 GENERAL 7-17. Printed Wiring Boards – Trans Board – ......46 Location of Controls ............

  • Page 4: Servicing Notes

    HCD-GN700/GX8800 SECTION 1 SERVICING NOTES • MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP – Back Panel – BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electro- PART No. static break-down because of the potential difference generated by the charged electrostatic load, etc.

  • Page 5: General

    HCD-GN700/GX8800 SECTION 2 This section is extracted from instruction manual. GENERAL Main unit ALPHABETICAL ORDER GAME INPUT (jacks) wj A - D R - Z GAME MIXING ef REC PAUSE/START qk ALBUM +/- qg GROOVE ed REPEAT 8 AMP MENU rd IR (receptor) rs SURROUND SPEAKER MODE w;...

  • Page 6: Remote Control

    HCD-GN700/GX8800 This section is extracted from instruction manual. Remote Control ALPHABETICAL ORDER TUNING + ws A - M VOL +/- 8 CD ql CLEAR 7 SYMBOLS CLOCK/TIMER SELECT 2 @/1 (power) 4 CLOCK/TIMER SET 3 1 2 3 nN (play) wg D.SKIP 9...

  • Page 7: Disassembly

    HCD-GN700/GX8800 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. CASE LOADING (PANEL) FRONT PANEL ASSY TUNER PACK, GAME IN BOARD, CD MECHANISM DECK SUB TRANS BOARD TAPE MECHANISM DECK CD SWITCH BOARD, DISPLAY BOARD...

  • Page 8: Case

    HCD-GN700/GX8800 Note: Follow the disassembly procedure in the numerical order given. 3-1. CASE 2 Five screws (+BVTT3 x 6) 6 Case 1 Three screws (case 3 TP2) 3 Two screws (+BVTT3 x 6) 1 Three screws (case 3 TP2) 3-2. LOADING (PANEL)

  • Page 9: Front Panel Assy

    HCD-GN700/GX8800 3-3. FRONT PANEL ASSY 8 Front panel ASSY 3 Screw (BVTP3 x 10) 1 Two wires (flat type) 7 From CN607 on Game in board MAIN board CN402 CN304 4 From deck B head 5 From CN606 on Game in board...

  • Page 10: Cd Mechanism Deck

    HCD-GN700/GX8800 3-5. CD MECHANISM DECK 2 Wire (flat type) (31 core) 4 CD mechanism deck 1 Two screws (BVTP3 x 10) CN201 3 CN701 MAIN board 3-6. GAME IN BOARD, TAPE MECHANISM DECK 2 Screw (+PTT2 x 4) 4 Two screws (+BVTP2.6 x 8)

  • Page 11: Cd Switch Board, Display Board

    HCD-GN700/GX8800 3-7. CD SWITCH BOARD, DISPLAY BOARD 1 Six screws 4 Five screws (+BVTP2.6 x 8) (+BVTP2.6 x 8) 2 CD SWITCH board 5 DISPLAY board 4 Five screws (+BVTP2.6 x 8) 3 Wire (flat type) (17 core) from CN604 3-8.

  • Page 12: Subwoofer Board, Rear Panel

    HCD-GN700/GX8800 3-9. REAR PANEL 6 rear panel with fan 1 two screws (+BVTT3 x 6) 2 two screws (+BVTP3 x 10) 3 three screws (+BVTP3 x 10) 4 three screws (+BVTP3 x 10) 5 connector CN851 main board 3-10. MAIN BOARD...

  • Page 13: Power Amp Board

    HCD-GN700/GX8800 3-11. POWER AMP BOARD 4 Two screws (+BVTP3 x 10) 6 Two screws (+BVTP3 x 10) 3 Bracket (HS) 5 Three screws (+BVTP3 x 10) 2 Two screws (+BVTP3 x 10) 7 POWER AMP board 1 Connector from CN997 3-12.

  • Page 14: Cd Board, Cd Block Assy

    HCD-GN700/GX8800 3-13. CD BOARD, CD BLOCK ASSY 3 Floating screw (+PTPWH M2.6) 1 Floating screw (+PTPWH M2.6) 6 Two insulators 2 Holder (213) ASSY qh CD block ASSY 5 Two coil springs 0 Two insulators (insulator) 9 Two coil springs...

  • Page 15: Motor (Tb) Board

    HCD-GN700/GX8800 3-15. MOTOR (TB) BOARD 6 Table motor ASSY (M741) 2 CN742 (flat type) 4 MOTOR (TB) board 5 Remove the two solderings of motor. 3 Two screws (+BTTP (M2.6)) 3-16. MOTOR (LD) BOARD 2 Two screws (+BTTP (M2.6)) 4 Remove the two solderings of motor.

  • Page 16: Test Mode

    HCD-GN700/GX8800 SECTION 4 TEST MODE [GC TEST MODE] * Check of Amplifier • This mode is used to check the fluorescent indicator tube, LED, 1. When button is pressed, GEQ increases to its maximum and model, destination, software version, volume, key and VACS a message “GEQ MAX”...
  • Page 17 HCD-GN700/GX8800 [COLD RESET] [AGING MODE] • The cold reset clears all data including preset data stored in the This mode can be used for operation check of CD section. RAM to initial conditions. Execute this mode when returning • If an error occurs, the aging operation would stops and the status the set to the customer.
  • Page 18 HCD-GN700/GX8800 • Display when an error occurred (CD Error Code Mode) 3) Display of no disc errors Procedure: Display [AMP MENU] [DISC 1] 1. Press button, button and button simultaneously to enter the error code display mode. D*$$%%&&##00 2. The fluorescent indicator tube displays the number of total error.
  • Page 19 HCD-GN700/GX8800 [CD SHIP MODE (WITHOUT MEMORY CLEAR)] [CD TRAY LOCK MODE] • This mode moves the optical pick-up to the position durable to • This mode let you lock the disc trays. When this mode is vibration. Use this mode when returning the set to the customer...

  • Page 20: Mechanical Adjustments

    HCD-GN700/GX8800 SECTION 5 SECTION 6 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS Precaution DECK SECTION 0 dB=0.775 V 1. Clean the following parts with a denatured alcohol-moistened swab: 1. Demagnetize the record/playback head with a head record/playback heads pinch rollers demagnetizer. erase head rubber belts 2.
  • Page 21 HCD-GN700/GX8800 2. Turn the adjustment screw and check output peaks. If the peaks REC BIAS ADJUSTMENT DECK B do not match for L-CH and R-CH, turn the adjustment screw so that outputs match within 1dB of peak. Procedure: In the MC test mode, the “REC memory mode” is convenient for this adjustment.

  • Page 22: Cd Section

    HCD-GN700/GX8800 REC LEVEL ADJUSTMENT DECK B CD SECTION Procedure: Note: In the MC test mode, the “REC memory mode” is convenient for 1. CD Block is basically designed to operate without adjustment. There- fore, check each item in order given.
  • Page 23 HCD-GN700/GX8800 RFAC Level Check E-F Balance Check Connection: Connection: oscilloscope oscilloscope CD board CD board TP5 (RFAC) TP2 (TE) TP7 (DVC) – TP7 (DVC) – Procedure: Procedure: Connect an oscilloscope to test point TP5 (RFAC) and TP Connect an oscilloscpe to test point TP2 (TE) and TP7 (DVC) 7(DVC) on the CD board.
  • Page 24 HCD-GN700/GX8800 Checking Location: – CD BOARD (SIDE B) – TP4 (FE) IC101 TP2 (TE) TP7 (DVC) TP5 (RFAC) IC104 IC103...

  • Page 25: Diagrams

    HCD-GN700/GX8800 SECTION 7 DIAGRAMS Note on Schematic Diagram: Note on Printed Wiring Boards: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics •...

  • Page 26: Circuit Board Location

    HCD-GN700/GX8800 7-1. CIRCUIT BOARD LOCATION TUNER PACK SUB TRANS board CD SWITCH board TRANS board POWER AMP board SENSOR board CD board SW board MOTOR (TB) board MOTOR (LD) board DRIVER board DISPLAY board MAIN board VOLUME board GAME IN board...
  • Page 27 HCD-GN700/GX8800 WAVEFORMS – MAIN BOARD – – CD BOARD – – DISPLAY BOARD – IC501 qa XC-OUT IC101 ra TE IC601 is X OUT 2.4Vp-p 3.0Vp-p 0.4Vp-p 32KHz VOL/DIV : 0.2V AC 4MHz VOL/DIV : 1V AC VOL/DIV : 1V AC TIME/DIV : 0.2msec...

  • Page 28: Block Diagram - Cd Servo Section

    HCD-GN700/GX8800 7-2. BLOCK DIAGRAM – CD SERVO Section – OPTICAL PICK-UP DIGITAL SERVO BLOCK DIGITAL SIGNAL PROC. RF AMP (KSS-213DCP) IC103 IC101 IC201 RF AC OPTICAL OPTICAL RFAC D OUT OUT(CD) CD A+3.3V RFDCO RFDC D/A CONV, MP3 DECODER RFDCI...

  • Page 29: Block Diagram - Tuner/Tape Deck Section

    HCD-GN700/GX8800 – TUNER/TAPE DECK Section – IC303 AMS DETECT R-CH Q390, 398, 399 MUTE Q306,389 DECK-A AIN1 L – CH EQ OUT1 TAPE L-CH PB OUT1 MAIN/POWER TAI1 HEAD SECTION R – CH R-CH CN301 BIN1 REC/PB SWITCH IC302 TEST...

  • Page 30: Block Diagram - Main/Power Section

    HCD-GN700/GX8800 – MAIN/POWER Section – REC L-CH TUNER/TAPE DECK SECTION SPEANA J631 DISPLAY SECTION R-CH D130 PHONES FEED BACK INPUT SELECT SWITCH, J117 SWITCH TONE CONTROL, Q101 ELECTRICAL VOLUME HEADPHONE MUTING IC102 Q671, 624 VIDEO/MD (AUDIO) IN R-CH BB A1...

  • Page 31: Block Diagram - Display Section

    HCD-GN700/GX8800 – DISPLAY Section – M+9V Q606 Q601 Q707 P1 – 36 SELECTOR Q605 FL601 FLUORESCENT BUFFER INDICATOR TUBE Q807, 808 D603, 605, 601 LED DRIVE D1002, 1004, 1006 Q602 – 604, D1008, 1010, 1012 Q1001 – 1006 G1 – 13, 16 – 21...

  • Page 32: Printed Wiring Board - Cd Board

    HCD-GN700/GX8800 7-3. PRINTED WIRING BOARD – CD Board – • See page 26 for Circuit Boards Location. CD BOARD (SIDE A) M102 CD BOARD (SIDE B) SPINDLE MOTOR S101 (LIMIT) M101 SLED MOTOR 1-686-782- (11) 1-686-782- (11) OPTICAL MAIN PICK-UP...

  • Page 33: Schematic Diagram - Cd Board

    HCD-GN700/GX8800 7-4. SCHEMATIC DIAGRAM – CD Board – • See page 49 for Pin Function Description. 0µH 0µH 0µH...

  • Page 34: Printed Wiring Board - Cd Mechanism Board

    HCD-GN700/GX8800 7-5. PRINTED WIRING BOARDS — CD MECHANISM Board — • Refer to page 26 for Circuit Boards Location. MAIN BOARD (Page 36) CN751 S751 • Semiconductor Location Ref. No. Location D701 D711 IC701 IC712 IC731 E-11 Q731...

  • Page 35: Schematic Diagram - Cd Mechanism Board

    HCD-GN700/GX8800 7-6. SCHEMATIC DIAGRAM – CD MECHANISM Board –...

  • Page 36: Printed Wiring Boards - Main Board

    HCD-GN700/GX8800 7-7. PRINTED WIRING BOARDS – MAIN Boards – • See page 26 for Circuit Boards Location. DRIVER BOARD BOARD TUNER (FOR CHECK) (FOR CHECK) (Page 34) (Page 32) PACK MAIN BOARD CD DIGITAL MD/VIDEO(AUDIO) DISPLAY BOARD (Page 42) • Semiconductor Location Ref.

  • Page 37: Schematic Diagram - Main Board (1/3)

    HCD-GN700/GX8800 7-8. SCHEMATIC DIAGRAM – MAIN Board (1/3) – • See page 51 for Pin Function Description. 100µH R347 5.6k...

  • Page 38: Schematic Diagram - Main Board (2/3)

    HCD-GN700/GX8800 7-9. SCHEMATIC DIAGRAM – MAIN Board (2/3) – GX8800...

  • Page 39: Schematic Diagram - Main Board (3/3)

    HCD-GN700/GX8800 7-10. SCHEMATIC DIAGRAM – MAIN (3/3) Boards –...

  • Page 40: Printed Wiring Boards - Game In, Cd Switch Board

    HCD-GN700/GX8800 7-11. PRINTED WIRING BOARD – GAME IN, CD SWITCH Board – • See page 26 for Circuit Boards Location. GAME IN BOARD DISPLAY BOARD VOLUME BOARD (Page 42) PHONES • Semiconductor AMP MENU DISPLAY Location TUNER MEMORY FM MODE...

  • Page 41: Schematic Diagram - Game In, Cd Switch Board

    HCD-GN700/GX8800 7-12. SCHEMATIC DIAGRAM – GAME IN, CD SWITCH Board –...

  • Page 42: Printed Wiring Board - Display Board

    HCD-GN700/GX8800 7-13. PRINTED WIRING BOARD – DISPLAY Board – • See page 26 for Circuit Boards Location. DISPLAY BOARD CD SWITCH BOARD (Page 40) TUNER/BAND TAPE A/B > > –, MD(VIDEO) ,ALBUM+ ,ALBUM– • Semiconductor GAME Location Ref. No. Location...

  • Page 43: Schematic Diagram - Display Board

    HCD-GN700/GX8800 7-14. SCHEMATIC DIAGRAM – DISPLAY Board – • See page 53 for Pin Function Description.

  • Page 44: Printed Wiring Board - Power Amp Board

    HCD-GN700/GX8800 7-15. PRINTED WIRING BOARDS – POWER AMP Boards – • See page 26 for Circuit Boards Location. FRONT SPEAKER SURROUND (IMPEDANCE SPEAKER USE 6–16Ω) (IMPEDANCE USE 24Ω) POWER AMP BOARD MAIN BOARD (Page 36) • Semiconductor Location Ref. No.

  • Page 45: Schematic Diagram - Power Amp Board

    HCD-GN700/GX8800 7-16. SCHEMATIC DIAGRAM – POWER AMP Boards – R556 (Page 47)

  • Page 46: Printed Wiring Boards - Trans Board

    HCD-GN700/GX8800 7-17. PRINTED WIRING BOARDS – TRANS Board – • See page 26 for Circuit Boards Location. MAIN BOARD AC IN (Page 36) SUB TRANS BOARD • Semiconductor Location GN700 Ref. No. Location D971 D972 D973 D974 D975 GN700 D977...

  • Page 47: Schematic Diagram - Trans Board

    HCD-GN700/GX8800 7-18. SCHEMATIC DIAGRAM – TRANS Board –...

  • Page 48: Ic Block Diagram

    HCD-GN700/GX8800 7-19. IC Block Diagrams IC101 CXD3068Q (CD BOARD) IC103 CXA2647N-T4 (CD BOARD) IC701 BA6956AN (DRIVER BOARD) IC712 BA6956AN (DRIVER BOARD) RW/ROM DC OFST RFDCI – – RFDCO CONTROL LOGIC – RW/ROM VOFST APC AMP EQ ON/OFF RFAC EQ IN...

  • Page 49: Ic Pin Function Description

    HCD-GN700/GX8800 7-20. IC Pin Function Description • IC104 CXD9717R-008 D/A Converter, MP3 Decoder (CD Board) Pin No. Pin Name Description RESET Reset input terminal “L”: reset MIMD Microcomputer interface mode selection input “H”: I2C, “L”: TSB (fixed at “L”) MICS/AD0...
  • Page 50 HCD-GN700/GX8800 Pin No. Pin Name Description BOOT/IO6 Terminal for test/SUBQ interface frame sync input (fixed at “L”) TXO/IO7 Flag signal input 2/SUBQ interface block sync input (fixed at “L”) VSSP – Ground for VCO circuit PLL phase error detection signal output...
  • Page 51 HCD-GN700/GX8800 • IC501 M30622MGN-B14FP SYSTEM CONTOL (MAIN Board) Description Pin No. Pin Name MP3 CS MP3 chip select signal output MP3 LP MP3 latch pules output MP3 ACK MP3 acknowledge signal input SIRCS SIRCS input MP3 DATA OUT Serial data output...
  • Page 52 HCD-GN700/GX8800 Discription Pin No. Pin Name ALC signal output TC-RELAY REC/PB selection signal output REC BIAS Bias on/off signal output CAPM-CONT Capstan motor REV/FWD/STOP control signal output B-TRIG TCM-B Trigger output A-TRIG TCM-A trigger output B-REC, REV Record tab switch for SIDE B signal output...
  • Page 53 HCD-GN700/GX8800 • IC601 MB90M407APF-G-124-BND DISPLAY CONTROL (DISPLAY Board) Description Pin No. Pin Name 1 to 7 G7 to G1 FLD grid output 8 to 10 P1 to P3 FLD segment output VSS-IO — Ground 12 to 22 P4 to P14...

  • Page 54: Exploded Views

    HCD-GN700/GX8800 SECTION 8 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Abbreviation The components identified by mark 0 or dotted line with mark may have some difference from the original AR : Argentine model 0 are critical for safety.

  • Page 55: Front Panel Section

    4-244-097-01 KNOB (VOL) 4-243-609-01 BELT (AF) 4-244-089-11 COVER (AL-STR) 4-243-610-01 BELT (AL) 4-951-620-01 SCREW (2.6X8), +BVTP 4-243-608-01 BELT (BR) 4-963-404-21 EMBLEM (5-A), SONY 4-224-104-11 DAMPER 1-751-688-11 WIRE (FLAT TYPE) (13 CORE) 3-378-434-01 CUSHION, SARANET 4-244-094-01 SPRING (L) FL601 1-518-862-11 INDICATOR TUBE, FLUORESCENT...

  • Page 56: Chassis Section

    HCD-GN700/GX8800 8-3. CHASSIS SECTION supplied supplied F974 T910 F978 F975 F976 F977 supplied supplied The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No.

  • Page 57: Cd Mechanism Deck Section-1 (Cdm74-K6Bd47S)

    HCD-GN700/GX8800 8-4. CD MECHANISM DECK SECTION-1 (CDM74-K6BD47S) M741 chassis assy Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-218-253-21 SCREW (M2.6), +BTTP 4-243-820-01 GEAR (TABLE) 1-776-182-11 WIRE (FLAT TYPE) (5 CORE) 1-687-134-11 MOTOR (TB) BOARD 4-243-819-01 GEAR (GENEVA)

  • Page 58: Cd Mechanism Deck Section-2 (Cdm74-K6Bd47S)

    HCD-GN700/GX8800 8-5. CD MECHANISM DECK SECTION-2 (CDM74-K6BD47S) RE701 M751 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No.

  • Page 59: Electrical Parts List

    HCD-GN700/GX8800 SECTION 9 ELECTRICAL PARTS LIST Ref. No. NOTE: Part No. Description Remarks Ref. No. Part No. Description Remarks • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark parts list may be different from the parts speci- are seldom required for routine service.
  • Page 60 HCD-GN700/GX8800 CD SWITCH DISPLAY Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks IC103 8-752-106-21 IC CXA2647N-T4 R254 1-216-845-11 METAL CHIP 100K 1/10W IC104 6-704-150-01 IC CXD9717R-008 R255 1-216-809-11 METAL CHIP 1/10W IC121 6-700-394-01 IC BA25BC0FP-E2 R257...
  • Page 61 HCD-GN700/GX8800 DISPLAY Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C104 1-126-964-11 ELECT 10uF D604 8-719-057-97 DIODE SEL5923A-TP15 (CD) C105 1-126-957-11 ELECT 0.22uF D605 8-719-057-97 DIODE SEL5923A-TP15 (TUNER/BAND) D606 8-719-057-97 DIODE SEL5923A-TP15 (TAPE A/B) C106 1-136-165-00 FILM 0.1uF...
  • Page 62 HCD-GN700/GX8800 DISPLAY DRIVER Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R138 1-249-417-11 CARBON 1/4W F S753 1-762-875-21 SWITCH, KEYBOARD (X) S754 1-762-875-21 SWITCH, KEYBOARD (-,.) R139 1-249-411-11 CARBON 1/4W S755 1-762-875-21 SWITCH, KEYBOARD (>,+) R140...
  • Page 63 HCD-GN700/GX8800 DRIVER GAME IN MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R733 1-249-417-11 CARBON 1/4W F R722 1-249-432-11 CARBON 1/4W R734 1-249-433-11 CARBON 1/4W R734 1-247-807-31 CARBON 1/4W R735 1-247-807-31 CARBON 1/4W R735 1-247-885-00 CARBON...
  • Page 64 HCD-GN700/GX8800 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C162 1-136-169-00 FILM 0.22uF C385 1-126-964-11 ELECT 10uF C386 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C163 1-136-171-00 FILM 0.33uF C387 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C167 1-126-961-11 ELECT 2.2uF...
  • Page 65 HCD-GN700/GX8800 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > FB516 1-414-772-11 FERRITE FB562 1-414-772-11 FERRITE CN201 1-779-299-11 CONNECTOR,FFC(LIF(NON-ZIF))31P * CN301 1-568-449-11 HOUSING, CONNECTOR(PC BOARD)3P < IC > * CN304 1-569-930-11 SOCKET, CONNECTOR 13P...
  • Page 66 HCD-GN700/GX8800 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Q301 8-729-141-73 TRANSISTOR 2SC3624A-T1L15L16 R154 1-216-821-11 METAL CHIP 1/10W Q302 8-729-142-46 TRANSISTOR 2SC2001TP-LK R155 1-216-841-11 METAL CHIP 1/10W Q303 8-729-142-46 TRANSISTOR 2SC2001TP-LK R156 1-216-833-11 METAL CHIP...
  • Page 67 HCD-GN700/GX8800 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R363 1-216-825-11 METAL CHIP 2.2K 1/10W R493 1-216-829-11 METAL CHIP 4.7K 1/10W R364 1-216-819-11 METAL CHIP 1/10W (GN700:AR,E2,E51,MX,GX8800) R365 1-216-833-11 METAL CHIP 1/10W R366 1-216-819-11 METAL CHIP...
  • Page 68 HCD-GN700/GX8800 MAIN MOTOR (LD) MOTOR (TB) POWER AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R592 1-216-829-11 METAL CHIP 4.7K 1/10W R593 1-216-825-11 METAL CHIP 2.2K 1/10W 1-687-133-11 MOTOR (LD) BOARD (GX8800) ***************** R593 1-216-821-11 METAL CHIP...
  • Page 69 HCD-GN700/GX8800 POWER AMP Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D506 8-719-991-33 DIODE 1SS133T-72 R527 1-249-438-11 CARBON 1/4W R528 1-249-437-11 CARBON 1/4W D507 8-719-991-33 DIODE 1SS133T-72 D508 8-719-991-33 DIODE 1SS133T-72 R529 1-249-433-11 CARBON 1/4W D509...
  • Page 70 HCD-GN700/GX8800 POWER AMP SENSOR SUB TRANS TRANS VOLUME Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < TERMINAL > 1-687-669-11 SW BOARD ********** TM501 1-694-877-11 TERMINAL BOARD (8P) (FRONT/SURROUND SPEAKER) < SWITCH > ************************************************************* S751 1-786-514-11 SWITCH, LEVER (SLIDE) (LEVER)
  • Page 71 HCD-GN700/GX8800 VOLUME Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D1004 6-500-529-01 DIODE SLI-325URT31W (VOL 4) S760 1-762-875-21 SWITCH, KEYBOARD (P.FILE) D1005 6-500-529-01 DIODE SLI-325URT31W (VOL 5) S761 1-762-875-21 SWITCH, KEYBOARD (ILLUMINATION) D1006 6-500-529-01 DIODE SLI-325URT31W (VOL 6)

This manual is also suitable for:

Hcd-gx8800

Table of Contents