Page 1
Home Network System Smart Plug KX-HNA101 Model No. Thank you for purchasing a Panasonic product. This document explains how to install the smart plug properly. For details about how to use the system, refer to the User’s Guide (page 9).
Table of Contents Important Information About this system ......3 For your safety ......3 Important safety instructions ..4 For best performance ....4 Other information .......5 Setup Part names and functions ..6 LED indicator ......6 Setup overview ......6 Connections .......7 Registering the smart plug ..8 Wireless communication range .........8 Appendix...
Failure to do so resulting in an accident. may cause electric shock and/or R Panasonic will not be held excessive heat resulting in a fire. responsible for damage or injury R Regularly remove any dust, etc.
The hub and other compatible determine if they are adequately Panasonic devices use radio waves to shielded from external RF (radio communicate with each other. frequency) energy. DECT features operate between 1.92 GHz and...
It should not be placed in rooms where the temperature is less than 0 °C (32 °F) or greater than 40 °C (104 °F). Damp basements should also be avoided. For assistance, please visit www.panasonic.com/support...
(i.e., indicator is turned not as part of a bundle). Confirm the usage area Green, lit Smart plug is on Read the information in this Green, Registration mode document to confirm that the blinking For assistance, please visit www.panasonic.com/support...
M N. Note about connections R The smart plug should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the smart plug to a ceiling-mounted AC outlet, as the For assistance, please visit www.panasonic.com/support...
R If registration fails, the hub sounds R The LED indicator blinks in red if it is several short beeps. out of range of the hub. In this case, confirm all connections, including those of the hub. For assistance, please visit www.panasonic.com/support...
(Sensor required.) – Timer on/off You can configure a timer to turn the electric device on and off at the desired times. – Overcurrent notification The smart plug can detect the current supplied to the connected For assistance, please visit www.panasonic.com/support...
R The illustrations in these instructions may vary slightly from the actual product. Trademarks R iPhone and iPad are registered trademarks of Apple Inc. R Android is a trademark of Google Inc. For assistance, please visit www.panasonic.com/support...
FCC RF exposure turning the equipment off and on, the requirements. user is encouraged to try to correct the For assistance, please visit www.panasonic.com/support...
Page 12
Appendix Notice: R FCC ID can be found on the rear of the unit. For assistance, please visit www.panasonic.com/support...
For hearing or speech impaired TTY users, TTY: 1-877-833-8855 Accessory Purchases (United States and Puerto Rico) Purchase Parts, Accessories and Owner’s Manual online for all Panasonic Products by visiting our Web Site at: www.pstc.panasonic.com or, send your request by E-mail to: [email protected] You may also contact us directly at:1-800-237-9080 (Fax Only) (Monday - Friday 9 am to 9 pm, EST.)
If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“Limited Warranty period”), at its option either (a) repair your product with new or...
Page 15
Send the unit to Panasonic Exchange Center, prepaid and adequately insured. Do not send your unit to Panasonic Corporation of North America listed on the back cover or to executive or regional sales offices. These locations do not repair consumer products.