Table of Contents
Quick Links
Internet: http://www.bosch-hausgeraete.de
Bosch Info-Team: de Tel. 01 80/5 30 40 50 (E 0,12/Min. DTAG)
de Gebrauchs- und
Montageanleitung
en Operating and
installation instructions
fr Mode d'emploi et
notice de montage
nl Gebruiksaanwijzing en
montagevoorschrift
it Istruzioni d'uso
e per il montaggio
es Instrucciones de uso
y de montaje
pt Instruções de serviçio
e de montagem
ru
Instrukciä po qkspluatacii
Rukovodstvo po montaøu
vytäønogo kolpaka
a
Table of Contents
Related Manuals for Bosch Household Appliance
Summary of Contents for Bosch Household Appliance
- Page 1 Instrucciones de uso y de montaje pt Instruções de serviçio e de montagem Instrukciä po qkspluatacii Rukovodstvo po montaøu vytäønogo kolpaka Internet: http://www.bosch-hausgeraete.de Bosch Info-Team: de Tel. 01 80/5 30 40 50 (E 0,12/Min. DTAG)
- Page 2 Seite 03 – 15 pagina 55 – 067 page 16 – 28 página 68 – 080 page 29 – 41 página 81 – 093 pagina 42 – 54 stranica 94 – 107 Abb. 1...
-
Page 3: Description Of Appliance
Operating instructions: Description of appliance Operating modes Heat shield Switch/light/ If the air intake is inadequate, there is a (hinged to increase the risk of poisoning from combustion gases suction area) which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be exceeded. -
Page 4: Before Using For The First Time
Before using for the first time Important notes: ❑ Before using your appliance for the first ❑ The Instructions for Use apply to several time, please read these Instructions for versions of this appliance. Accordingly, Use carefully. They contain important you may find descriptions of individual information concerning your personal features that do not apply to your... -
Page 5: Filters And Maintenance
Operating the extractor hood Filters and maintenance Different grease filters can be used to Cooking vapours are best eliminated absorb the grease particles in the kitchen vapours. ❑ Switching on the extractor hood when you start cooking. Fleece grease filter: ❑... - Page 6 Filters and maintenance Removing and installing the metal filter: Metal grease filter: 1. Press in the interlocks on the left and The filter mats consist of non-flammable right sides of the filter grille. material. Warning: A build up of greasy residue increases flammability, and the function of the extractor hood may be impaired.
- Page 7 Filters and maintenance Removing and installing the metal filter 3. Insert the activated carbon filter at the (See details for removing/inserting the rear, fold up and lock into position on the fleece filter): left and right with the wing nuts. 1.
-
Page 8: Cleaning And Care
Cleaning and care Replacing the light bulbs Isolate the extractor hood by pulling out 1. Switch off the extractor hood and isolate the mains plug or switching off the fuse. the extractor hood by pulling out the mains plug or switching off the fuse. ❑... -
Page 9: Installation Instructions
Installation Instructions: Important information Old appliances are not worthless Additional information concerning gas cookers: rubbish. Valuable raw materials can be reclaimed by recycling old appliances. When installing gas hotplates, comply Before disposing of your old appliance, with the relevant national statutory render it unusable. -
Page 10: Prior To Installation
Prior to installation Exhaust-air mode The exhaust air is discharged upwards This can be achieved if the combustion air through a ventilation shaft or directly is able to flow through non-lockable through the outside wall into the open. openings, e.g. in doors, windows and in conjunction with an air supply/air-intake wall Exhaust air must not be discharged via box or by other technical procedures such... -
Page 11: Before Installation
Before installation If the exhaust air is conveyed through Exhaust air upwards: the exterior wall, a telescopic wall box Pipe diameter: 100 or 120 mm should be used. ❑ Break off cover on the top of the extractor hood; strike the retaining points with a tool. -
Page 12: Electrical Connection
Before installation Circulating-air mode Exhaust air towards the rear: Pipe diameter: 100 mm ❑ Break off cover on the rear panel of the extractor hood; strike the retaining points with a tool. ❑ With activated carbon filter if exhaust-air mode is not possible. ❑... -
Page 13: Electrical Specifications
Electrical connection Fitting the extractor hood 3. Connect the brown (Live) wire to the 60 cm wide extractor hood: terminal marked ‘L’, or coloured red. With 3 screws. The extractor hood may be connected to a correctly installed earthed socket only. Attach the earthed socket near the extractor hood in an accessible position. - Page 14 Fitting the extractor hood To a wall-hanging cupboard 90 cm wide extractor hood: With 6 screws. 50 cm wide extractor hood: With 4 screws. 1. Dimensions for the mounting boreholes can be found in, or place a template on the base of the wall- 60 cm wide extractor hood: hanging cupboard.
-
Page 15: Final Assembly
Final assembly Exhaust-air mode: 2-motor extractor hood ❑ Stick the enclosed covering foil over the Selecting the operating mode: air outlet grille on the top of the ❑ Exhaust-air mode: Position 1 extractor hood. ❑ Circulating-air mode: Position 2 Ensure that the surface is clean. ❑... - Page 16 DHZ 2100 DHZ 1610 DHZ 1100 266657 084848 5750 205 314 Robert Bosch Hausgeräte GmbH Printed in Germany 0704 Es.