Siemens CCIS1337-LP Configuration Manual

Super-high resolution indoor 1/3" day/night ip camera
Table of Contents
Super-high Resolution
Indoor 1/3" Day/Night
IP Camera CCIS1337-LP
Configuration Manual
V1.0
Fire Safety & Security Products
Siemens Building Technologies
Table of Contents
loading

Summary of Contents for Siemens CCIS1337-LP

  • Page 1 Super-high Resolution Indoor 1/3" Day/Night IP Camera CCIS1337-LP Configuration Manual V1.0 Fire Safety & Security Products Siemens Building Technologies...
  • Page 2 Copyrights Copyright 2006 © Fire & Security Products GmbH & Co. oHG All rights reserved. Siemens Fire & Security Products GmbH & Co. oHG confers upon the purchaser the right to use the software. It is not permitted to reproduce this manual in whole or in part or translate it into another language without our written consent.
  • Page 3 About this document This user guide explains the installation and configuration of the IP camera. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 4: Table Of Contents

    Configuring text overlay ................33 10.4.3 Configuring JPEG encoder settings............34 10.5 Configuring camera settings ..............36 10.5.1 Configuring day/night settings..............36 10.5.2 Setting the exposure ................38 10.5.3 Setting the synchronization ..............39 10.5.4 Setting the white balance ................40 Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 5 Live video in Gecko-based browsers ............51 10.10.2 Live video with Internet Explorer.............52 10.10.3 Incorporating a still image in an HTML page ..........53 Maintenance ..................54 11.1 Service mode ..................54 11.1.1 Resetting the IP address.................54 Disposal ....................56 Index.......................57 Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 7: Functional Description

    The live images can be transmitted via a TCP/IP-based network and viewed with a Web browser (such as Netscape V7.0+, Mozilla 7.0+ or Internet Explorer version 5.5 or later). Image parameters and network settings of the IP camera can be configured over the network. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 8: Safety

    Malfunctions The unit generates, uses and can emit radiofrequency energy. If not installed – and used according to instructions, interference with radio and television reception may result. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 9: Meaning Of The Signal Words

    Danger of minor bodily injury or property damage CAUTION Danger of malfunctions IMPORTANT Meaning of the hazard symbols The nature of the hazard is indicated by icons. Dangerous situation Electrical voltage Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 10: Guidelines And Standards

    EU Directive The product meets the requirements of the EU Directive 89/336/EEC on electromagnetic compatibility The EU declaration of conformity is available from: Siemens Building Technologies Fire & Security Products GmbH & Co. oHG 76181 Karlsruhe, Germany EU Directive 89/336/EEC on electromagnetic compatibility...
  • Page 11: Technical Specifications

    1/4000, 1/10000, 1/100000 sec. Gain control Selectable: normal, OFF, turbo; gain up to 30 dB Back light compensation 6 selectable ranges: center 1, center 2, upper half, lower half, center low, center high Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 12 Power supply +24 V AC ±10%, 50 Hz Power Over Ethernet (POE) Power requirement Normal operation Incl. blocking filter movement (< 1 s) 9.2 W (max. 9.66 W) max. 13.0 W Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 13: Ordering Information

    1.9 kg NOTE The 12 V power supply (order no. 2GF1800-8BE) found in the product range is not suited for use with this IP camera, because it does not provide enough power. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 14: Package Contents

    Package contents Package contents Super-high resolution indoor 1/3" day/night IP camera CCIS1337-LP C/CS mounting adapter Quick installation guide CD with operating manual CD with software Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 15: Unit Description

    +12 V DC / +24 V AC connection Connection for external control – GND Connection for external control – B/W Connection for external control – GND Connection for external control – AL. IN Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 16: Connector Socket Definition

    Video lens DC lens +12 V Damp- Damp+ VIDEO Drive + Drive - Y/C output Y (luminance, 1 V , 75 Ω) C (chrominance, 0.3 V (burst), 75 Ω) RJ-45 network connection Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 17: System Connections

    Unit description System connections Fig. 1 System connections Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 18: Accessing The Unit's Home Page

    SSDP (Simple Service Discovery Protocol / network protocol) – Start the Web-Cam IP Manager by loading IP Manager.exe. This application is found on the CD included with delivery. The Web-Cam IP Manager program window will open: Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 19 Select the device whose home page you want to access. Click the Home page of selected server... button The home page of the selected device will appear. See Section 7.5 Components of the unit home page. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 20: Components Of The Unit Home Page

    Display area for live video images. See Section 10.9.1 Displaying live video for more information. Buttons for displaying live video images. See Section 10.9.1 Displaying live video for more information. Submenu Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 21: Ptz Control

    To input two-digit position numbers, click the ./.. button first. Save position The current pan/tilt position is stored under the selected position number (point 6). Up to 64 positions can be stored for the SIEMENS PTZ; the SIEMENS CCDA can store up to 55 positions. Focus adjustment The focus can be set here.
  • Page 22: Assembly And Setup

    In order to reduce the electromagnetic radiation sufficiently, wrap the cable once around the core (see Fig. 2). Cable Illustration IP Camera Power supply cable Y/C cable LP/MP EIM-0050751G Fig. 4 Connecting the cable Set the focal length. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 23: Setting The Focal Length

    ) until the image is in focus. Tighten the screw ( ) again carefully. Connect the IP camera to the network using a network cable connected to the RJ-45 network jack ( Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 24: Operational Setup

    See Section 10.3 Changing the device IP address. 10. If applicable, restore the IP address of the client PC to the original settings. Repeat steps 1 to 7. When performing step 5, use your original client PC settings. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 25: Mapping A Network Route

    = 192.168.100.100 if the IP address set by the factory is used xxx.xxx.xxx.xxx = the IP address you have allocated to the device; e.g. 141.73.31.3. Press the Enter key. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 26: Configuration

    ISP. When the connection is interrupted, the newly allocated IP address must be assigned to your domain name, e.g. , so that your device can still be accessed using your domain name. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 27: Example Of Access Using A Dynamic Ip Address

    If it is now attempted to establish a connection to your domain name, www.myWebCam.de for example, the connection to your router will be built up via your ISP. The router must be configured to pass all incoming requests to the device. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 28: Configuring Network Settings

    Displays the network card ID. MAC Address Choose the speed from the dropdown list. The preferred setting is Link Speed “autosensing”. Click Save. Restart your IP camera. See Section 10.8 Restarting the camera. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 29: Changing The Device Ip Address

    Each time the device is restarted, the DHCP or BOOTP server will automatically reinstate the network settings (IP address, subnet mask and gateway, if applicable). Restart your IP camera. See Section 10.8 Restarting the camera for more information. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 30 255.255.255.0, the device can be accessed by a client PC with IP address 192.168.100.162 (and subnet mask 255.255.255.0). The IP address of the client PC and that of the device are both located in the same network segment. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 31: Changing The Ip Address Using The Web-Cam Ip Manager

    (printed on the underside of the device). Each device's IP address or MAC address is unique. Select the device whose IP address you want to change. Click the Set IP Address button. The following dialog appears: Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 32 There is an additional network connection (for example an ISDN modem) on the PC which is configured, activated and assigned an IP address for the TCP/IP protocol. Deactivate the network connection. The IP Manager can now find the IP camera. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 33: Configuring Image Parameters

    Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. Select Image parameters in the Configuration menu. The Image parameters dialog appears: Enter the desired settings in this dialog. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 34: Configuring Jpeg Encoder Settings

    The values shown relate to a color image of average complexity. Open the unit’s home page. See Section 7.4 Accessing the unit’s home page. Select Image parameters in the Configuration menu. The Image parameters dialog appears: Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 35 Select the font size for the text overlay from the options in the Display Font Size dropdown list: The following options are available: – (no text overlay) Small Large Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 36: Configuring Camera Settings

    This function is only in effect if the AUTO option has been selected for D/N mode. This allows the delay time for th day/night function to be set. Select 0, 5, 10, 15 or 20 seconds as the delay time for day/night switching. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 37 For use of the IP camera in conjunction with discrete infrared light we recommend the MANUAL option for D/N Mode to prevent continuous switching between color and black/white mode, which can occur with the AUTO setting. Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 38: Setting The Exposure

    ELC mode is intended for the use of lenses with manual aperture setting. Select a level from 0 to 9 for adaptation of the individual picture Level brightness for the ALC and ELC operating modes. Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 39: Setting The Synchronization

    Select a phase angle from 0 to 300° for the LL operating mode. The VPhase (0 to 300°) default setting is 0°. NOTE With DC operation SYNC automatically selects INT mode even if LL has been set. Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 40: Setting The White Balance

    MANUAL (R,B) To set the white balance manually, use the slide controls to adjust the red (R) and blue (B) values. Or enter the exact values in the corresponding fields. Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 41: Entering And Positioning The Id Text

    Any unpermitted characters are replaced by a period. Determine the position of the text by specifying the horizontal and Horizontal position vertical position on the live image. Vertical position Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 42: Configuring Other Settings

    Set the image definition here (LOW, STANDARD, HIGH). Aperture Choose a value between 1 and 8 for color intensity. Chroma Select ON or OFF to activate or deactivate the mirror function. Mirror Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 43: Service Configuration

    The following options for flange focal length (back focus) are available: Back focus The lens aperture is opened completely and the shutter speed set temporarily to AUTO to facilitate configuration. The function is deactivated. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 44: Setting The Date And Time

    Choose the desired settings from the dropdown list for each field. Click Save. 10.7 Configuring user names and passwords You can define user names and passwords for device configuration and image access (live image access rights). Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 45 Select Security in the Configuration menu. The Security dialog will appear: Fig. 15 Security Enter the desired user name (max. 32 characters). Enter the desired password (max. 32 characters). Confirm the password. Click Save. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 46: Restarting The Camera

    Click on the Restart now button. The device will restart immediately. The device requires about 30 to 40 seconds for the restart. No communication can take place with the device during this period. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 47: Time-Controlled Restart

    The timeout value must be a multiple of the cycle time (the value entered in Frequency). In the event of an unexpected system problem, this ensures the device becomes available again after 2 to 3 minutes. Restart the device to apply the new settings. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 48: Live Video

    In addition to Microsoft Internet Explorer (5.5 or later), you will need to install Java Runtime. Java Runtime can be found on the CD included in the package. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 49 See Section 7.5.1 PTZ control. Pause button Switches from live video display to still picture display Display live video button Switches from still picture display to live video display Resolution submenu Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 50: Setting Live Video Resolution

    Choose Save image as in the context menu (right-click with the mouse). The Save image dialog will appear. Indicate the storage location and the image file name in this dialog. Click the Save button. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 51: Embedding Live Video Images In A Dedicated Html Page

    Image offset, measured vertically from the top edge of the digital image qual JPEG coding quality in the range 0-100 Black/white display properties 1: black/white, 0: color limit Bandwidth limit in kilobits per second Changing parameters Tab. 1 Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 52: Live Video With Internet Explorer

    Image offset, measured vertically from the top edge of the digital image qual JPEG coding quality in the range 0-100 Black/white display properties 1: black/white, 0: color limit Bandwidth limit in kilobits per second Tab. 2 Changing parameters Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 53: Incorporating A Still Image In An Html Page

    Still pictures can be embedded in a dedicated HTML page as follows, for example: Use the parameters in the tables above. See Section 10.10.1 Live video in Gecko- based browsers and Section 10.10.2 Live video with Internet Explorer for more information. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 54: Maintenance

    Remove the power supply cable from the unit. Remove the network cable from the unit. Reconnect the power supply cable to the unit. The device will switch to service mode after 30 seconds. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 55 The permanent IP address will be applied only after the IP camera is restarted. See Section 10.3.1 Changing the device IP address via the device home page. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 56: Disposal

    Detailed information on the disposal of used equipment can be obtained from your local authorities, your waste disposal service or the authorized dealer from whom you purchased the product. Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 57: Index

    Directives Electromagnetic compatibility 10 Disposal 56 Password ~ configuration 44 Product specification 11 Establishing initial contact with the unit 24 Exposure 38 Resolution Setting live video resolution 50 Flip picture 33 Siemens Building Technologies Fire Safety & Security Products 09.2005...
  • Page 58 Components of the unit home page 20 Saving still pictures 50 User name Service 43 ~ configuration 44 Service mode 54 Synchronization 39 Web-Cam IP Manager Troubleshooting 32 Text overlay White balance 40 Siemens Building Technologies Fire Safety & Security Products 04.2006...
  • Page 60 Issued by © 2006 Copyright by Siemens Building Technologies Siemens Building Technologies AG Fire & Security Products GmbH & Co. oHG Data and design subject to change without notice. D-76181 Karlsruhe Supply subject to availability. Printed in the Federal Republic of Germany www.sbt.siemens.com...

Table of Contents