Table of Contents
Quick Links
See also:
User Manual
Service Manual for L1 and L2
Nokia Asha 500 Dual SIM
RM-934, RM-972
Nokia Asha 500
RM-973
Key features
2.8" QVGA Display
Capacitive touch screen and back key
2 MP Camera
Wi-Fi support
Micro SD card support up to 32 GB
Version 1.0
Exploded view
Solder components
Service concept
Disassembly steps
More
Service devices
More
More
©2013 Nokia | Nokia Internal Use only | All Rights Reserved.
Check the repair
policy before
performing any
mechanical repair
on Service Level
1&2!
Assembly hints
More
Product controls and interfaces
More
More
More
Table of Contents
Related Manuals for Nokia Asha 500 Dual SIM RM 934
Summary of Contents for Nokia Asha 500 Dual SIM RM 934
- Page 1 Micro SD card support up to 32 GB Version 1.0 Exploded view Disassembly steps Assembly hints More More More Solder components Service devices Product controls and interfaces More More More Service concept More ©2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Page 2: Exploded View
RELEASE BUTTON I0022 GSM ANTENNA MODULE I0021 SCREW TORX+ SIZE 6 M1.6 x 4.3 B-COVER I0023 I0024 Only available Not reuseable Repair/swap as assembly after removal only in level 3 ©2013 Nokia | Nokia Internal Use only | All Rights Reserved. -
Page 3: Disassembly Steps
Nokia Asha 500 Dual SIM, Nokia Asha 500 RM-934 RM-972 (Dual SIM), RM-973 (Single SIM) Version 1.0 1) For disassembling you need the Nokia Standard toolkit version 2. You will also need the camera removal tool SS-276. 2) Protect the TOUCH PANEL with protective film. - Page 4 3) Push from the RELEASE BUTTON to release the B-COVER. 4) Remove the B-COVER.
- Page 5 5) Unscrew the four Torx+ size 6 screws in the order shown. 6) Start releasing the D-COVER from the top left corner with the SRT-6 to detach the two shown clips.
- Page 6 7) Then release the other clip on the left side of the device. 8) Then release the two clips on the right side of the device...
- Page 7 9) Remove the D-COVER. 10) Open the DISPLAY connector. Be careful not to damage the connector or any components nearby.
- Page 8 11) To remove the ENGINE BOARD, first release the shown clip with the SRT-6. 12) Then release the other shown clip with the SRT-6.
- Page 9 13) Remove the ENGINE BOARD. 14) Protect the DISPLAY with protective film.
- Page 10 15) Release the DISPLAY by carefully sliding the SS-93 under it to detach the adhesive. 16) Remove the DISPLAY.
- Page 11 17) Release one corner of the TOUCH IC GASKET with the dental tool and remove it with tweezers. Be careful not to injure yourself or damage the ENGINE BOARD with the sharp end of the dental tool. Do not use the TOUCH IC GASKET again. Disard it. 18) Peel off the two DISPLAY CONDUCTIVE ADHESIVES with the SS-93.
- Page 12 19) Use the SS-276 to remove the CAMERA. Push the SS-276 to the CAMERA socket and hold down the button on top of the SS-276. 20) Pull up the CAMERA.
- Page 13 21) Use the SS-93 to release the IHF SPEAKER. Remove the IHF SPEAKER with tweezers. 22) Remove and discard the SPEAKER BOTTOM GASKET with the dental tool.
- Page 14 23) Use the SS-93 to release the hook holding the ANTENNA MODULE. 24) Push up to release the ANTENNA MODULE as shown with the SRT-6. Remove the ANTENNA MODULE.
- Page 15 25) Release the RELEASE BUTTON with the SRT-6 and remove it. 26) Release one corner of the SPEAKER MESH with the dental tool and peel it off with tweezrs. Do not use the SPEAKER MESH again. DIscard it.
- Page 16 27) Protect the other side of the TOUCH PANEL with protective film. 28) Release the EARPIECE with the dental tool and remove it with weezers. Do not use the EARPIECE again. Discard it.
- Page 17 29) Remove and discard the EARPIECE GASKET. 30) The Nokia Asha 500 disassembly procedure is complete. -END OF DISASSEMBLY- ©2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Page 18: Assembly Hints
Nokia Asha 500 Dual SIM, Nokia Asha 500 RM-934 RM-972 (Dual SIM), RM-973 (Single SIM) Version 1.0 1) Fasten the four Torx+ size 6 screws in the order shown to the torque of 20 Ncm. ©2013 Nokia | Nokia Internal Use only | All Rights Reserved. -
Page 19: Solder Components
Service Manual Level 1 and 2 Solder components Nokia Asha 500 Dual SIM, Nokia Asha 500 RM-934 RM-972 (Dual SIM), RM-973 (Single SIM) Version 1.0 BOTTOM S1000 S1002 J7402 J7401 J7400 Volume + Volume - Power/Lock GSM Ant GSM Ant... -
Page 20: Service Devices
For more information, refer to the Service Bulletin (SB-011) on Nokia Online. Supplier or manufacturer contacts for tool re-order can be found in “Recommended service equipment” document on Nokia Online. ©2013 Nokia | Nokia Internal Use only | All Rights Reserved. - Page 21 8 — Volume/Zoom up 9 — Volume/Zoom down 10 — Lock/Power key 11 — Back cover release button 12 — BT/WLAN Antenna area 13 — Loudspeaker 14 — Main antenna area ©2013 Nokia | Nokia Internal Use only | All Rights Reserved.
- Page 22 Nokia Asha 500 Dual SIM, Nokia Asha 500 RM-934 RM-972 (Dual SIM), RM-973 (Single SIM) Version 1.0 Flashing concept Service CA-101 software Care Dummy Battery with power supply via Nokia charger or product specific battery Transceiver ©2013 Nokia | Nokia Internal Use only | All Rights Reserved.
-
Page 23: Version History
Service Manual Level 1 and 2 Version history Nokia Asha 500 Dual SIM, Nokia Asha 500 RM-934 RM-972 (Dual SIM), RM-973 (Single SIM) Version 1.0 Version Date Description 27.11.2013 First published version ©2013 Nokia | Nokia Internal Use only | All Rights Reserved.