Page 1 R A M T R U C K 2 0 1 5 1 5 0 0 / 2 5 0 0 / 3 5 0 0 O W N E R ’ S M A N U A L...
Page 2 VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name This manual illustrates and describes the operation of Chrysler Group LLC shall be deemed to be deleted and the features and equipment that are either standard or op- name Chrysler Canada Inc.
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5 INTRODUCTION CONTENTS INTRODUCTION ......4 VAN CONVERSIONS/CAMPERS ... .6 HOW TO USE THIS MANUAL .
Page 6: Introduction
4 INTRODUCTION When it comes to service, remember that your authorized INTRODUCTION dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new Chrysler Group nicians and genuine parts, and cares about your satisfac- LLC vehicle. Be assured that it represents precision tion.
Page 7 INTRODUCTION 5...
Page 8: Van Conversions/Campers
6 INTRODUCTION Operating instructions for the special equipment in- WARNINGS AND CAUTIONS stalled by the conversion/camper manufacturer should This Owners Manual contains WARNINGS against op- also be supplied with your vehicle. If these instructions erating procedures that could result in a collision or are missing, please contact your authorized dealer for bodily injury.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 frame and underbody as well as the Automobile Infor- VEHICLE MODIFICATIONS/ALTERATIONS mation Disclosure Label affixed to a window on your vehicle, the vehicle registration and title. WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
Page 11: Things To Know Before Starting Your Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A WORD ABOUT YOUR KEYS ... . .12 VEHICLE SECURITY ALARM ....21 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Using The Panic Alarm ....28 KEYLESS ENTER-N-GO™ ....42 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Exhaust Gas ......115 ▫ Periodic Safety Checks You Should Make Outside The Vehicle .
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS Your vehicle uses either a key start ignition system or keyless ignition system. The key start ignition system consists of a either a bladed key with an immobilizer chip in it, or a Key Fob with Remote Keyless Entry (RKE) transmitter and an Ignition Node Module (IGNM).
Page 15: Keyless Ignition Node (Kin) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Keyless Ignition Node (KIN) — If Equipped This feature allows the driver to operate the ignition switch with the push of a button, as long as the Remote Keyless Entry (RKE) transmitter is in the passenger compartment. The Keyless Ignition Node (KIN) has four operating positions, three of which are labeled and will illuminate when in position.
Page 16: Key Fob
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When using the emergency key to gain access to Key Fob your vehicle, be aware that the security alarm may be Key Fob — If Equipped triggered. Insert the Key Fob into the ignition and place The Key Fob operates the ignition switch.
Page 17 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 KIN Key Fob — If equipped NOTE: When using the emergency key to gain access to your vehicle, be aware that the security alarm may be This KIN Key Fob allows the driver to operate the triggered.
Page 18: Removing Key Fob From Ignition
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with a touchscreen radio, refer Removing Key Fob From Ignition to “Uconnect® Settings” in “Understanding Your In- Place the shift lever in PARK (if equipped with an strument Panel” for further information. automatic transmission).
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 WARNING! WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or • Before exiting a vehicle, always apply the parking in a location accessible to children, and do not brake, shift the transmission into PARK, and push leave the ignition of a vehicle equipped with ignition button to place ignition in OFF mode.
Page 20: Key-In-Ignition Reminder
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Key-In-Ignition Reminder SENTRY KEY® Opening the driver’s door when the Key Fob is in the The Sentry Key® Immobilizer System prevents unau- ignition and the ignition switch position is OFF or ACC, thorized vehicle operation by disabling the engine.
Page 21: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 During normal operation, after turning on the ignition CAUTION! switch, the Vehicle Security Light will turn on for three seconds for a bulb check. If the light remains on after the The Sentry Key® Immobilizer system is not compat- bulb check, it indicates that there is a problem with the ible with some aftermarket remote starting systems.
Page 22: Customer Key Programming
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming CAUTION! Programming Key Fobs or RKE transmitters may be • Always remove the Key Fobs from the vehicle and performed at an authorized dealer. lock all doors when leaving the vehicle unattended. •...
Page 23: Vehicle Security Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 VEHICLE SECURITY ALARM To Arm The System The Vehicle Security Alarm monitors the vehicle doors Follow these steps to arm the Vehicle Security Alarm: and ignition for unauthorized operation. When the Ve- 1.
Page 24: To Disarm The System
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE same exterior zone (refer to Keyless Enter- N-Go™ To Disarm The System in Things To Know Before Starting Your Vehicle for The Vehicle Security Alarm can be disarmed using any of further information). the following methods: •...
Page 25: Security System Manual Override
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 5. For vehicles not equipped with Keyless Enter-N-Go™, Security System Manual Override insert a valid key into the ignition switch and turn the The Vehicle Security Alarm will not arm if you lock the key to the ON position.
Page 26: Remote Keyless Entry (Rke)
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock all doors, • The front courtesy overhead console and door cour- tailgate, and the RamBox® (if equipped) as well as tesy lights will not turn off if the dimmer control is in activate the Panic Alarm from distances up to approxi- the “Dome ON”...
Page 27 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Key Fob With Remote Keyless Entry (RKE) Transmitter Key Fob With RKE Transmitter Keyless Enter-N-Go™ (IGNM) Fob (KIN)
Page 28: Remote Unlock The Doors
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Settings (Customer-Programmable Features)” in “Un- Remote Unlock The Doors derstanding Your Instrument Panel” for further informa- Push and release the UNLOCK button on the RKE tion. transmitter once to unlock the driver’s door. Push the unlock button twice within five seconds to unlock all •...
Page 29: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 Flash Lamps With Remote Key Lock To Lock The Doors This feature will cause the turn signal lights to flash when Push and release the LOCK button on the RKE transmit- the doors are locked or unlocked with the RKE transmit- ter to lock all doors, the tailgate and the RamBox®...
Page 30: Using The Panic Alarm
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with a touchscreen radio, refer The Panic Alarm will stay on for three minutes unless to “Uconnect® Settings” in “Understanding Your In- you turn it off by either pushing the PANIC button a strument Panel”...
Page 31: Rke Air Suspension (Remote Lowering Of The Vehicle) - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Cancelling Remote Lowering RKE Air Suspension (Remote Lowering Of The Vehicle) — If Equipped Vehicle lowering can be cancelled at anytime. When vehicle lowering is cancelled, the vehicle will raise up to For easy entry and loading, your vehicle can be the next defined level and lock out the remote lowering lowered by pushing the Key Fob air suspension...
Page 32: Programming Additional Transmitters
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Remove the emergency key by sliding the mechanical Programming Additional Transmitters latch on the back of the RKE transmitter sideways If you do not have a programmed RKE transmitter, with your thumb and then pull the key out with your contact your authorized dealer for details.
Page 33 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 2. Separating RKE halves requires screw removal – if equipped, and gently prying the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal. Keyless Ignition Node (KIN) Emergency Key Removal Remove Screw From Transmitter Case...
Page 34 32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Separating Ignition Node Module (IGNM) Transmitter Separating Keyless Ignition Node (KIN) Transmitter Case Case 3. Remove the battery by turning the back cover over (battery facing downward) and tapping it lightly on a solid surface such as a table or similar, then replace the battery.
Page 35: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 clip, located on the back cover. Avoid touching the • This device must accept any interference received, new battery with your fingers. Skin oils may cause including interference that may cause undesired op- battery deterioration.
Page 36: Remote Starting System - If Equipped
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE STARTING SYSTEM — IF EQUIPPED How To Use Remote Start All of the following conditions must be met before the This system uses the Remote Keyless Entry engine will remote start: (RKE) transmitter to start the engine conve- •...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • Remote Start Cancelled — Fuel Low WARNING! • Remote Start Cancelled — System Fault • Do not start or run an engine in a closed garage or • Remote Start Disabled — Start Vehicle to Reset confined area.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • If an engine fault is present or fuel level is low, the To Exit Remote Start Mode Without Driving The vehicle will start and then shut down in 10 seconds. Vehicle Push and release the REMOTE START button one time or •...
Page 39: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 Remote Start Comfort Systems — If Equipped DOOR LOCKS When remote start is activated, the heated steering wheel Manual Door Locks and driver heated seat features will automatically turn on Front and rear doors may be locked by moving the lock in cold weather.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Front doors may be opened with the inside door handle WARNING! (Continued) without lifting the lock knob. • Before exiting a vehicle, always turn the vehicle Doors locked before closing will remain locked when OFF, apply the parking brake, shift the automatic closed.
Page 41: Power Door Locks - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 WARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go™...
Page 42 40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE operate. A chime will sound if the Key Fob is in the Automatic Doors Unlock Programming — If ignition switch and a door is open, as a reminder to Equipped remove the Key Fob. The Automatic Doors Unlock feature can be enabled or disabled as follows: Automatic Door Locks —...
Page 43: Child-Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 engage and disengage the Child-Protection locks. When Child-Protection Door Lock the system on a door is engaged, that door can only be To provide a safer environment for children riding in the opened by using the outside door handle even if the rear seat, the rear doors (if equipped) of your vehicle inside door lock is in the unlocked position.
Page 44: Keyless Enter-N-Go
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE KEYLESS ENTER-N-GO™ WARNING! The Passive Entry system is an enhancement to the Avoid trapping anyone in a vehicle in a collision. vehicle’s Remote Keyless Entry (RKE) system and a Remember that the rear doors can only be opened feature of Keyless Enter-N-Go™.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 • If the vehicle is unlocked by the Passive Entry Door Handle, and no door goes ajar within 60 seconds, the vehicle will re-lock and if equipped will arm the security alarm. •...
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE To Unlock From The Passenger Side: Preventing Inadvertent Locking Of Passive Entry RKE Transmitter In Vehicle With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the passenger door handle, grab the front To minimize the possibility of unintentionally locking a passenger door handle to unlock all doors automatically.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 To Lock The Vehicle’s Doors Do NOT grab the door handle when pushing the door handle lock button. This could unlock the door(s). With one of the vehicle’s Passive Entry RKE transmitters within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock all doors.
Page 48: Windows
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WINDOWS • After pushing the door handle LOCK button, you Power Windows — If Equipped must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle. This is done to allow you to check if the vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 the front passenger door for passenger window control WARNING! (Continued) and on the rear doors of the Quad Cab and Crew Cab particularly unattended children, can become en- models. The windows will operate when the ignition trapped by the windows while operating the power switch is turned to the ON/RUN or ACC position, and window switches.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Up Feature With Anti-Pinch Protection WARNING! (4-Door Models Driver And Front Passenger Door Only) — If Equipped There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the Lift the window switch fully upward to the second window before closing.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Window LOCKOUT Switch (4–Door Models Only) The window LOCKOUT switch on the driver’s door allows you to disable the window control on the rear passenger doors. To disable the window controls on the rear passenger doors, push the window LOCK button into the latched or down position.
Page 52: Wind Buffeting
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Wind Buffeting Important Safety Precautions Wind buffeting can be described as the perception of Please pay close attention to the information in this pressure on the ears or a helicopter-type sound in the section.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 restraints or belt-positioning booster seats. Older chil- side air bags will inflate forcefully into the space dren who do not use child restraints or belt- between you and the door and you could be injured. positioning booster seats should ride properly buckled 9.
Page 54: Seat Belt Systems
52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE driver or outboard front seat passenger is unbelted, Seat Belt Systems the Seat Belt Reminder Light will turn on and remain Buckle up even though you are an excellent driver, even on until both outboard front seat belts are buckled. on short trips.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 object is on the outboard front passenger seat or when the The seat belt webbing retractor will lock only during very seat is folded flat (if equipped). It is recommended that sudden stops or collisions. This feature allows the shoul- pets be restrained in the rear seat (if equipped) in pet der part of the seat belt to move freely with you under harnesses or pet carriers that are secured by seat belts,...
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • In a collision, you and your passengers can suffer • Wearing your seat belt incorrectly could make your much greater injuries if you are not properly buck- injuries in a collision much worse.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 WARNING! (Continued) WARNING! (Continued) • A twisted seat belt may not protect you properly. In • A seat belt that is worn under your arm is danger- a collision, it could even cut into you. Be sure the ous.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) • A frayed or torn seat belt could rip apart in a collision and leave you with no protection. Inspect the seat belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be re- placed immediately.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.” across your hips, below your abdomen.
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is comfort- able and not resting on your neck. The retractor will withdraw any slack in the shoulder belt. 6.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Inserting Latch Plate In Use Position 2. Grasp the mini-latch plate and pull the seat belt over the seat. 3. Route the shoulder belt to the inside of the [right/ left] head restraint.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. When the seat belt is long enough to fit, insert the 9. To release the seat belt, push the red button on the mini-latch plate into the mini-buckle until you hear a buckle.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 3. Slide the latch plate upward over the folded webbing. WARNING! (Continued) The folded webbing must enter the slot at the top of • When reattaching the mini-latch and mini-buckle, the latch plate. ensure the seat belt webbing is not twisted.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- ton.
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 The pretensioners are triggered by the Occupant Re- WARNING! straint Controller (ORC). Like the air bags, the preten- sioners are single use items. A deployed pretensioner or • ONLY use a Seat Belt Extender if it is physically a deployed air bag must be replaced immediately.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belts And Pregnant Women Center Lap Belts We recommend that pregnant women use the seat belts The center seating position for the Quad Cab®, Mega throughout their pregnancy. Keeping the mother safe is Cab®...
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 Restraints Using The Vehicle Seat Belt” under the “Child Restraints” section of this manual. The table below defines the type of feature for each seating position. Quad Cab®/Mega Cab®/Crew Cab • ALR = Switchable Automatic Locking Retractor If the passenger seating position is equipped with an ALR and is being used for normal usage: Standard Cab...
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE as to not activate the ALR. If the ALR is activated, you WARNING! will hear a clicking sound as the seat belt retracts. Allow the webbing to retract completely in this case and then •...
Page 69: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 How To Disengage The Automatic Locking Mode WARNING! (Continued) Unbuckle the combination lap/shoulder belt and allow it • Do not use the Automatic Locking Mode to restrain to retract completely to disengage the Automatic Locking occupants who are wearing the seat belt or children Mode and activate the vehicle sensitive (emergency) who are using booster seats.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Knee Impact Bolsters • Advanced Front Air Bags • Supplemental Side Air Bags • Front And Side Impact Sensors — If Equipped • Seat Belt Pretenioners • Seat Belt Buckle Switch Advanced Front Air Bags This vehicle has Advanced Front Air Bags for both the driver and front passenger as a supplement to the seat...
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Advanced Front Air Bag Features WARNING! The Advanced Front Air Bag system has multistage • Being too close to the steering wheel or instrument driver and front passenger air bags. This system provides panel during Advanced Front Air Bag deployment output appropriate to the severity and type of collision as could cause serious injury, including death.
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) • Relying on the air bags alone could lead to more • No objects should be placed over or near the air severe injuries in a collision. The air bags work bag on the instrument panel or steering wheel, with your seat belt to restrain you properly.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 On the other hand, depending on the type and location of way as the air bags inflate to their full size. The Advanced impact, Advanced Front Air Bags may deploy in crashes Front Air Bags fully inflate in less time than it takes to with little vehicle front-end damage but that produce a blink your eyes.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Supplemental Side Air Bags Your vehicle is equipped with two types of side air bags: 1. Supplemental Seat-Mounted Side Air Bags (SABs): Located in the outboard side of the front seats. The SABs are marked with a “SRS AIRBAG”...
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 When the SAB deploys, it opens the seam on the out- board side of the seatback’s trim cover. The inflating SAB deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure you if you are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rollover events, in addition to the injury reduction poten- WARNING! tial provided by the seat belts and body structure. • Your vehicle is equipped with left and right The SABICs deploy downward, covering the side win- Supplemental Side Air Bag Inflatable Curtains dows.
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 The SABICs and SABs (“Side Air Bags”) are designed to Seat belts (and child restraints where appropriate) are activate in certain side impacts and certain rollover necessary for your protection in all collisions. They also events.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE deploys the left Side Air Bags only and a right side WARNING! (Continued) impact deploys the right Side Air Bags only. • Relying on the Side Air Bags alone could lead to The Side Air Bags will not deploy in all side collisions, more severe injuries in a collision.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 event may be in progress and whether deployment is If you do have a collision, which deploys the air bags, any appropriate. A slower-developing event may deploy the or all of the following may occur: seat belt pretensioners on both sides of the vehicle.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE continues, see your doctor. If these particles settle on • After any collision, the vehicle should be taken to an your clothing, follow the garment manufacturer’s in- authorized dealer immediately. structions for cleaning. Enhanced Accident Response System Do not drive your vehicle after the air bags have de- In the event of an impact, if the communication network...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 System Reset Procedure The ORC contains a backup power supply system that may deploy the air bags even if the battery loses power or In order to reset the Enhanced Accident Response System it becomes disconnected prior to deployment.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE free, if any of the following occurs, have an authorized WARNING! dealer service the air bag system immediately. Ignoring the Air Bag Warning Light in your instru- • The Air Bag Warning Light does not come on during ment panel could mean you won’t have the air bags the four to eight seconds when the ignition switch is to protect you in a collision.
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Maintaining Your Air Bag System WARNING! (Continued) • Do not attempt to modify any part of your air bag WARNING! system. The air bag may inflate accidentally or may • Modifications to any part of the air bag system not function properly if modifications are made.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Event Data Recorder (EDR) These data can help provide a better understanding of the circumstances in which crashes and injuries occur. This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in NOTE: EDR data are recorded by your vehicle only if a certain crash or near crash-like situations, such as an air non-trivial crash situation occurs;...
Page 85: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Child Restraints WARNING! (Continued) Everyone in your vehicle needs to be buckled up at all great that you could not hold the child, no matter times, including babies and children. how strong you are. The child and others could be badly injured.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: • www.tc.gc.ca/eng/roadsafety/safedrivers- childsafety-index-53.htm • For additional information, refer to www.seatcheck.org or call 1–866–SEATCHECK (732–8243). Canadian resi- dents should refer to Transport Canada’s website for additional information: Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Recommended Type Of Child Restraint...
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 Child Size, Height, Weight Or Recommended Type Of Child Restraint Larger Children Children who have out-grown Belt Positioning Booster Seat and their forward-facing child restraint, the vehicle seat belt, seated in the but are too small to properly fit rear seat of the vehicle the vehicle’s seat belt...
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE have outgrown the rear-facing weight or height limit of WARNING! their rear-facing convertible child seat. Children should remain in a forward-facing child seat with a harness for • Never place a rear-facing child restraint in front of as long as possible, up to the highest weight or height an air bag.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 WARNING! WARNING! (Continued) • When your child restraint is not in use, secure it in • Improper installation can lead to failure of an the vehicle with the seat belt or LATCH anchor- infant or child restraint.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Do the child’s knees bend comfortably over the front WARNING! of the vehicle seat – while they are still sitting all the way back? Never allow a child to put the shoulder belt under an arm or behind their back.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lower Anchors And Tethers For Children (LATCH) Your vehicle is equipped with the child restraint anchor- Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 LATCH Positions For Installing Child Restraints In This Vehicle Standard Cab Quad Cab®/Crew Cab Full Bench Lower Anchorage Symbol 2 anchorages per Lower Anchorage Symbol 2 anchorages per • • seating position seating position Top Tether Anchorage Symbol Top Tether Anchorage Symbol...
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Quad Cab®/Mega Cab®/Crew Cab Split Bench Lower Anchorage Symbol 2 anchorages per • seating position Top Tether Anchorage Symbol •...
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 What is the weight limit (child’s 65 lbs (29.5 kg) Use the LATCH anchorage system weight + weight of the child re- until the combined weight of the straint) for using the LATCH an- child and the child restraint is chorage system to attach the child 65 lbs (29.5 kg).
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Can two child restraints be at- Never “share” a LATCH anchorage tached using a common lower with two or more child restraints. LATCH anchorage? If the center position does not have dedicated LATCH lower anchor- ages, use the seat belt to install a child seat in the center position next to a child seat using the...
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Locating The LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating The LATCH Anchorages Regular Cab models have tether strap anchor- ages behind the front center and right seats. Quad Cab®, Mega Cab® and Crew Cab mod- els have tether strap anchorages located behind each of the rear seats.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 tether strap. The tether strap will have a hook at the end to attach to the top tether anchorage and a way to tighten the strap after it is attached to the anchorage. Center Seat LATCH —...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Center Seat LATCH — Quad Cab®/Mega To Install A LATCH-Compatible Child Restraint Cab®/Crew Cab Split Bench If the selected seating position has a Switchable Auto- If a child restraint installed in the center position blocks matic Locking Retractor (ALR) seat belt, stow the seat the seat belt webbing or buckle for the outboard position, belt, following the instructions below.
Page 101 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 3. Attach the lower hooks or connectors of the child How To Stow An Unused ALR Seat Belt: restraint to the lower anchorages in the selected seat- When using the LATCH attaching system to install a ing position.
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Vehicle Seat WARNING! Belt • Improper installation of a child restraint to the The seat belts in the passenger seating positions are LATCH anchorages can lead to failure of the re- equipped with either a Switchable Automatic Locking Re- straint.
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle Standard Cab Quad Cab®/Mega Cab®/Crew Cab • ALR = Switchable Automatic Locking Retractor • ALR = Switchable Automatic Locking Retractor • Cinch = Cinching Latch Plate •...
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to with the seat belt to attach a forward...
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Installing A Child Restraint With A Switchable 4. Pull on the webbing to make the lap portion tight Automatic Locking Retractor (ALR) against the child seat. 1. Place the child seat in the center of the seating 5.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the tether strap to the anchorage and tighten the tether rear-most position to make room for the child seat. You may also move the front seat forward to allow strap. See the section “Installing Child Restraints more room for the child seat.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 6. Test that the child restraint is installed tightly by into the buckle again. If you still cannot make the child pulling back and forth on the child seat at the belt restraint installation tight, try a different seating position.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Route the tether strap to provide the most direct path between the anchorage and the child seat. The tether strap should go between the head restraint posts underneath the head restraint. You may need to adjust the head restraint to the upward position to pass the tether strap underneath the head restraint and be- tween its posts.
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 WARNING! Never place a rear facing infant seat in front of an air bag. A deploying Passenger Advanced Front Air Bag can cause death or serious injury to a child 12 years or younger, including a child in a rearward facing infant seat.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Right or Left Outboard Seats: 1. Raise the head restraint and reach between the rear seat and rear glass to access the tether strap loop. Tether Strap Loop With Center Head Restraint In Raised Position 2.
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 3. Pass the tether strap hook under the head restraint 4. Attach the hook to the center tether strap loop (see behind the child seat, though the tether strap loop diagram). Tighten the tether strap according to the behind the seat and over to the center tether strap child seat manufacturer’s instructions.
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If there are child seats in both of the outboard (left and right) seating positions, the tether strap hooks of both child seats should be connected to the center tether strap loop. This is the correct way to tether two outboard child seats.
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 3. Pass the tether strap hook under the head restraint 4. Attach the hook to the outboard tether strap loop (see behind the child seat, though the tether strap loop diagram). Tighten the tether strap according to the behind the seat and over to the right or left outboard child seat manufacturer’s instructions.
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Three Child Restraints: 1. Place a child restraint on each outboard rear seat. Route the tether straps following the directions for right and left seating positions, above. 2. Attach both hooks to the center tether strap loop, but do not tighten the straps yet.
Page 115: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 ENGINE BREAK-IN RECOMMENDATIONS WARNING! A long break-in period is not required for the engine and • An incorrectly anchored tether strap could lead to drivetrain (transmission and axle) in your vehicle. increased head motion and possible injury to the Drive moderately during the first 300 miles (500 km).
Page 116: Safety Tips
114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CAUTION! WARNING! Never use Non-Detergent Oil or Straight Mineral Oil • Do not leave children or animals inside parked in the engine or damage may result. vehicles in hot weather. Interior heat build-up may cause serious injury or death.
Page 117 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 118 116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE not lit during starting, see your authorized dealer. If the Safety Checks You Should Make Inside The light stays on, flickers, or comes on while driving, have Vehicle the system checked by an authorized dealer. Seat Belts Defroster Inspect the seat belt system periodically, checking for...
Page 119 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 WARNING! WARNING! (Continued) • Check mounting of mats on a regular basis. Always Pedals that cannot move freely can cause loss of properly reinstall and secure floor mats that have vehicle control and increase the risk of serious per- been removed for cleaning.
Page 120 118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Periodic Safety Checks You Should Make Outside The Vehicle Check for positive closing, latching, and locking. Tires Fluid Leaks Examine tires for excessive tread wear and uneven wear Check area under vehicle after overnight parking for fuel, patterns.
Page 121: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......126 ▫ Power Mirrors — If Equipped ... .138 ▫...
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Passenger’s Power Seat — If Equipped ..145 ▫ Easy Entry/Exit Seat ....163 ▫...
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 ▫ Lights-On Reminder ....172 ▫ Windshield Washers ....179 ▫...
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ To Accelerate For Passing ....191 ▫ ParkSense® Warning Display ... . .202 PARKSENSE®...
Page 125 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 ▫ Programming A Non-Rolling Code ..218 ▫ Sunshade Operation....226 ▫...
Page 126 124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE STORAGE ......237 ▫ Manual Sliding Rear Window — If Equipped .
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 ▫ Camper Applications ....268 TRI-FOLD TONNEAU COVER — IF EQUIPPED......271 EASY-OFF TAILGATE .
Page 128: Mirrors
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield. The mirror installs on the windshield button with a counterclockwise rotation and requires no tools for mounting.
Page 129: Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 • Press the Mirror Dimmer button a second time to turn Automatic Dimming Mirror — If Equipped the feature Off. A single ball joint mirror is provided in the vehicle. It is a twist on mirror that has a fixed position at the wind- shield.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The ASSIST and 9–1–1 features operate through • Vehicle Customer Care – Total support for all other the Uconnect® Access service. These buttons will only vehicle issues. operate as long as your Uconnect® Access service is 9-1-1 Call active.
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 3. Once a connection between the vehicle and a 9-1-1 NOTE: Once a connection is made between the vehicle’s operator is made, the 9-1-1 Call system may transmit 9-1-1 Call system and the 9-1-1 operator, the 9-1-1 opera- the following important vehicle information to a 9-1-1 tor may be able to open a voice connection with the operator:...
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) • The 9-1-1 Call system is embedded into the vehi- • If anyone in the vehicle could be in danger (e.g., cle’s electrical system. Do not add aftermarket fire or smoke is visible, dangerous road conditions electrical equipment to the vehicle’s electrical sys- or location), do not wait for voice contact from a tem.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 • The Phone Screen will display the following message WARNING! (Continued) “Vehicle phone requires service. Please contact your • Modifications to any part of the 9-1-1 Call system dealer.” could cause the air bag system to fail when you •...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The ignition key is in OFF position. WARNING! (Continued) • The vehicle’s electrical systems are not intact. • The Occupant Restraint Control module turns on the Air Bag Warning Light on the instrument panel •...
Page 135: Automatic Dimming Mirror With Rear View Camera Display - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 NOTE: Never place anything on or near the vehicle’s CAUTION! wireless and GPS antennas. You could prevent wireless and GPS signal reception, which can prevent your vehicle To avoid damage to the mirror during cleaning, never from placing an emergency call.
Page 136: Outside Mirrors
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the vehicle is placed into reverse gear a video Outside Mirrors display illuminates to display the image generated by the To receive maximum benefit, adjust the outside mirrors rear view camera located on the tailgate handle. The auto to center on the adjacent lane of traffic with a slight dimming feature is also disabled to improve rear view overlap of the view obtained on the inside mirror.
Page 137: Outside Mirrors Folding Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Outside Mirrors Folding Feature CAUTION! All outside mirrors are designed to be able to be manu- It is recommended to fold the mirrors into the full ally folded both forward and rearward to prevent dam- rearward position to resist damage when entering a age.
Page 138: Power Folding Outside Mirrors For Standard And Trailer Tow - If Equipped
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is equipped with a touchscreen, this Power Folding Outside Mirrors For Standard And feature can be programmed through the Uconnect® Trailer Tow — If Equipped system. Refer to “Uconnect® Settings” in “Understand- If equipped with power folding mirrors, they can be ing Your Instrument Panel”...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 • The mirrors are accidentally manually folded/ unfolded. • The mirrors come out of the unfolded position. • The mirrors shake and vibrate at normal driving speeds. To reset the power folding mirrors: Fold and unfold them by pressing the button (this may require multiple button pushes).
Page 140: Power Mirrors - If Equipped
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors — If Equipped The controls for the power mirrors are located on the driver’s door trim panel. Power Mirror Controls 1 — Mirror Select Buttons 2 — Four-Way Mirror Control Switch Power Mirror Controls Location To adjust a mirror, press either the L (left) or R (right) The power mirror controls consist of mirror select but-...
Page 141: Heated Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Using the mirror control switch, press on any of the four Heated Mirrors — If Equipped arrows for the direction that you want the mirror to move. These mirrors are heated to melt frost or ice. This feature can be activated whenever you turn on the rear window defroster (if equipped).
Page 142: Trailer Towing Mirrors - If Equipped
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Fold the trailer towing mirrors rearward prior to Trailer Towing Mirrors — If Equipped entering an automated car wash. These mirrors are designed with an adjustable mirror head to provide a greater vision range when towing A small blindspot mirror is located next to main mirror extra-wide loads.
Page 143: Illuminated Vanity Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Illuminated Vanity Mirror — If Equipped “Slide-On-Rod” Features Of Sun Visor — If Equipped Illuminated vanity mirrors are located on each sun visor. To use the mirror, rotate the sun visor down and swing The sun visor “Slide-On-Rod”...
Page 144: Seats
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS Seats are a part of the Occupant Restraint System of the vehicle. WARNING! • It is dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 145: Driver's Power Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Driver’s Power Seat — If Equipped Some models may be equipped with an eight-way power driver’s seat. The power seat switches are located on the outboard side of the driver’s seat cushion. There are two power seat switches that are used to control the move- ment of the seat cushion and the seatback.
Page 146 144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Adjusting The Seat Forward Or Rearward Reclining The Seatback The seat can be adjusted both forward and rearward. The angle of the seatback can be adjusted forward or Push the seat switch forward or rearward, the seat will rearward.
Page 147: Passenger's Power Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Passenger’s Power Seat — If Equipped WARNING! (Continued) Some models are equipped with a six-way power pas- • Do not ride with the seatback reclined so that the senger seat. The power seat switch is located on the shoulder belt is no longer resting against your outboard side of the seat.
Page 148: Heated Seats - If Equipped
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped On some models, the front and rear seats may be equipped with heaters located in the seat cushions and seat backs. WARNING! • Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaus- tion or other physical condition must exercise care...
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 • Press the heated seat button a second time to turn WARNING! (Continued) the Low setting On. • Do not place anything on the seat or seatback that • Press the heated seat button a third time to turn insulates against heat, such as a blanket or cushion.
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles Equipped With Remote Start Rear Heated Seats On some models, the two outboard seats are equipped On models that are equipped with remote start, the with heated seats. The heated seat switches for these heated seats can be programed to come on during a seats are located on the rear of the center console.
Page 151: Ventilated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 • The engine must be running for the heated seats to The front ventilated seats control buttons are located on operate. the center instrument panel below the climate controls. If your vehicle is equipped with a touchscreen, the front When the HIGH-level setting is selected, the heater will ventilated seats control buttons are also located within provide a boosted heat level during the first four minutes...
Page 152: Manual Seat Adjuster - If Equipped
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Vehicles Equipped With Remote Start Manual Seat Adjuster — If Equipped Both front seats are adjustable forward or rearward. The On models that are equipped with remote start, the manual seat adjustment handle is located under the seat ventilated seats can be programed to come on during a cushion at the front edge of each seat.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 have reached the desired position. Then, using body Dump Feature (Manual Recline Seat Only) — pressure, move forward and rearward on the seat to be Standard Cab sure that the seat adjusters have latched. Actuating the recliner handle will allow the seatback to swing (dump) forward on manual recliner seats.
Page 154: 40-20-40 Front Bench Seat - If Equipped
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 40-20-40 Front Bench Seat — If Equipped The seat is divided into three segments. The outboard seat portions are each 40% of the total width of the seat. On some models the back of the center portion (20%) easily folds down to provide an armrest/center storage compartment.
Page 155 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 Folding Rear Seat (Table Mode) — If Equipped 2. Fold the seatback forward. Both the left and right rear seatbacks can be folded down and used as a table. To fold down either rear seatback: 1.
Page 156 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat — If Equipped WARNING! (Continued) Both the outboard rear seats will drop and move forward • Cargo must be securely tied down before driving when the seatback is folded flat. your vehicle.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Folding Rear Seat Handle Rear Passenger Fold-Flat Seats 2. Fold the seatback down and push the seat forward. 3. Lift the seatback, to return the seat to the upright position. Be sure the seat is locked in place.
Page 158: Head Restraints
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) vehicle or occupying a seat. Head restraints should An improperly latched seat could cause serious in- never be adjusted while the vehicle is in motion. jury or death. Make sure that the seatback is securely Driving a vehicle with the head restraints improperly locked into position.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 WARNING! A loose head restraint thrown forward in a collision or hard stop could cause serious injury or death to occupants of the vehicle. Always securely stow re- moved head restraints in a location outside the occu- pant compartment.
Page 160: Driver Memory Seat - If Equipped
158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Head Restraints NOTE: The rear seats are equipped with adjustable head re- • The rear center head restraint (Crew Cab and Quad straints. To raise the head restraint, pull upward on the Cab) has only one adjustment position that is used to head restraint.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 presets. Your Remote Keyless Entry (RKE) transmitter can also be programmed to recall the same positions when the UNLOCK button is pressed. NOTE: Your vehicle is equipped with two RKE trans- mitters, one RKE transmitter can be linked to memory position 1 and the other transmitter can be linked to memory position 2.
Page 162: Programming The Memory Feature
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Programming The Memory Feature NOTE: To create a new memory profile, perform the • Memory profiles can be set without the vehicle in following: PARK, but the vehicle must be in PARK to recall a memory profile.
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 Uconnect® system. Refer to “Uconnect® Settings ” in NOTE: If a memory profile has not already been set, refer “Understanding Your Instrument Panel” for further to Programming The Memory Feature for instructions information. on how to set a memory profile.
Page 164: Memory Position Recall
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To recall the memory settings for driver one using the Memory Position Recall RKE transmitter, press the UNLOCK button on the NOTE: For vehicles equipped with an automatic trans- RKE transmitter linked to memory position 1. mission, the vehicle must be in PARK to recall memory positions.
Page 165: Easy Entry/Exit Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 • When you remove the Key Fob from the ignition (or Easy Entry/Exit Seat change the ignition to OFF, for vehicles equipped with This feature provides automatic driver seat positioning to Keyless Enter-N-Go™), the driver seat will move to a enhance driver mobility when entering and exiting the position 0.3 in (7.7 mm) forward of the rear stop if the vehicle.
Page 166: To Open And Close The Hood
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Easy Entry/Exit feature is not enabled when the vehicle is delivered from the factory. The Easy Entry/Exit feature is enabled (or later disabled) through the programmable features in the Uconnect® system. Refer to “Uconnect®...
Page 167: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 WARNING! Be sure the hood is fully latched before driving your vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. Failure to follow this warning could result in serious injury or death.
Page 168: Headlights
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- lowed by rinsing. CAUTION! Do not use abrasive cleaning components, solvents, steel wool or other abrasive materials to clean the lenses.
Page 169: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 90 seconds after you turn the ignition switch to the OFF Automatic Headlights — If Equipped position. To turn the automatic headlights off, turn the This system automatically turns the headlights on or off headlight switch out of the AUTO position.
Page 170: Daytime Running Lights (Drl) - If Equipped
168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is not equipped with a touchscreen, this Headlight Delay feature can be programmed through the Electronic Ve- To aid in your exit, your vehicle is equipped with a hicle Information Center (EVIC) or Driver Information headlight delay that will leave the headlights on for Display (DID).
Page 171: Automatic High Beam Headlamp Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 Center (EVIC)” or “Driver Information Display (DID)” in NOTE: “Understanding Your Instrument Panel” for further in- • If your vehicle is equipped with a touchscreen the formation. Automatic High Beam Headlamp Control can be turned on or off using the Uconnect®...
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To opt out of the Advanced Auto High-Beam Sensitiv- If your vehicle is not equipped with a touchscreen, the ity Control (default) and enter Reduced High-Beam Automatic High Beams are enabled through the Elec- Sensitivity Control (not recommended), toggle high- tronic Vehicle Information Center (EVIC) or Driver Infor- beam lever 6 full on/off cycles within 10 seconds of...
Page 173: Parking Lights And Panel Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 2. Push back on the multifunction lever once again to reactivate the system. Parking Lights And Panel Lights To turn on the parking lights and instrument panel lights, rotate the headlight switch clockwise. To turn off the parking lights, rotate the headlight switch back to the O (Off) position.
Page 174: Lights-On Reminder
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE eight minutes. If the headlights are turned on and left on Lights-On Reminder for eight minutes while the ignition is OFF, the exterior If the headlights, parking lights, or cargo lights are left on lights will automatically turn off.
Page 175 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 The brightness of the instrument panel as well as the ambient lighting can be regulated by rotating the dimmer control right (brighter) or left (dimmer). When the head- lights are on you can supplement the brightness of the odometer, trip odometer, radio and overhead console by rotating the control to the right until you hear a click.
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Courtesy/Reading Lights Both lights in the overhead console and rear passenger compartment will illuminate as courtesy lights when a door is opened, when the dimmer control is rotated to the courtesy light position (full right position), or when the UNLOCK button is pressed on the Remote Keyless Entry (RKE) transmitter, if equipped.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 Ambient Light The overhead console is equipped with an ambient light feature. This light casts illumination for improved visibil- ity of the floor console area. Rear Passenger Courtesy/Reading Light NOTE: The courtesy/reading lights will remain on until the switch is pressed a second time, so be sure they have been turned off before leaving the vehicle.
Page 178: Cargo Light
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Light Multifunction Lever The cargo lights are turned on by pressing on the cargo The multifunction lever is located on the left side of the button. steering column. Turn Signals Move the multifunction lever up or down and the arrows on each side of the instrument cluster flash to show proper operation of the front and rear turn signal lights.
Page 179: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Lane Change Assist Tap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn off. Flash-To-Pass You can signal another vehicle with your headlights by partially pulling the multifunction lever toward the steer- ing wheel.
Page 180: High/Low Beam Switch
178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE High/Low Beam Switch WINDSHIELD WIPERS AND WASHERS Push the multifunction lever toward the instrument Windshield Wipers panel to switch the headlights to high beam. Pulling the The wipers and washers are operated by a switch in the multifunction lever back toward the steering wheel will multifunction lever.
Page 181: Windshield Wiper Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Windshield Wiper Operation Windshield Washers Rotate the end of the lever upward, to the first detent past To use the windshield washer, push the washer knob, the intermittent settings for low-speed wiper operation. located on the end of the multifunction lever, inward to Rotate the end of the lever upward to the second detent the second detent.
Page 182: Mist Feature
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rain Sensing Wipers — If Equipped WARNING! This feature senses moisture on the windshield and Sudden loss of visibility through the windshield automatically activates the wipers for the driver. The could lead to a collision. You might not see other feature is especially useful for road splash or overspray vehicles or other obstacles.
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 The sensitivity of the system can be adjusted with the The Rain Sensing system has protection features for the multifunction lever. Wiper delay position 1 is the least wiper blades and arms, and will not operate under the sensitive, and wiper delay position 5 is the most sensi- following conditions: tive.
Page 184: Tilt Steering Column
182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Remote Start Mode Inhibit — On vehicles equipped with Remote Starting system, Rain Sensing wipers are not operational when the vehicle is in the remote start mode. Once the operator is in the vehicle and has placed the ignition switch in the RUN position, rain sensing wiper operation can resume, if it has been selected, and no other inhibit conditions (mentioned previously) exist.
Page 185: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 If your vehicle is equipped with a touchscreen, the heated WARNING! (Continued) steering wheel control button is located within the cli- the driver to lose control of the vehicle. Failure to mate or controls screen of the touchscreen. follow this warning may result in serious injury or •...
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If your vehicle is equipped with a touchscreen, this WARNING! feature can be programmed through the Uconnect® system. Refer to “Uconnect® Settings” in “Understand- • Persons who are unable to feel pain to the skin ing Your Instrument Panel”...
Page 187: Driver Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 DRIVER ADJUSTABLE PEDALS — IF EQUIPPED The adjustable pedals system is designed to allow a greater range of driver comfort for steering wheel tilt and seat position. This feature allows the brake, accelerator, and clutch pedals (if equipped) to move toward or away from the driver to provide improved position with the steering wheel.
Page 188: Electronic Speed Control
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE if the pedals are attempted to be adjusted when the CAUTION! system is locked out (“Adjustable Pedal Disabled — Cruise Control Engaged” or “Adjustable Pedal Disabled Do not place any article under the adjustable pedals —...
Page 189: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 The Electronic Speed Control buttons are located on the NOTE: In order to ensure proper operation, the Elec- right side of the steering wheel. tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time.
Page 190: To Set A Desired Speed
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 The drivers preferred units can be selected through the Metric Speed (km/h) instrument panel settings if equipped. Refer to “ Under- • Pressing the RES (+) button once will result in a standing Your Instrument Panel” for more information. 1 km/h increase in set speed.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Decrease Speed Metric Speed (km/h) When the Electronic Speed Control is set, you can de- • Pressing the RES (+) button once will result in a crease speed by pushing the SET (-) button. 1 km/h increase in set speed.
Page 193: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 To Accelerate For Passing WARNING! Press the accelerator as you would normally. When the Electronic Speed Control can be dangerous where the pedal is released, the vehicle will return to the set speed. system cannot maintain a constant speed.
Page 194: Parksense® Sensors
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® will retain the last system state (enabled or ParkSense® Sensors disabled) from the last ignition cycle when the ignition is The four ParkSense® sensors, located in the rear fascia/ changed to the ON/RUN position. bumper, monitor the area behind the vehicle that is within the sensors’...
Page 195: Parksense® Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 The ParkSense® Warning screen will only be displayed if ParkSense® Display Sound and Display is selected. When the vehicle is in REVERSE, the warning display will turn ON indicating the system status. NOTE: If your vehicle is equipped with a touchscreen, this feature can be programmed through the Uconnect®...
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Single 1/2 Second Tone Slow Tone...
Page 197 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Fast Tone Continuous Tone...
Page 198 196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than...
Page 199: Enabling And Disabling Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 Adjustable Chime Volume Settings Enabling And Disabling ParkSense® The Rear chime volume settings are programmable. ParkSense® can be enabled and disabled with the ParkSense® switch. • If your vehicle is equipped with a touchscreen, the When the ParkSense switch is pressed to dis- settings may be programmed through the Uconnect®...
Page 200: Service The Parksense® Rear Park Assist System
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense® switch LED will be ON when system has detected a faulted condition, the EVIC/DID ParkSense® is disabled or defective. The ParkSense® will display the PARKSENSE UNAVAILABLE WIPE switch LED will be OFF when the system is enabled. REAR SENSORS or the PARKSENSE UNAVAILABLE SERVICE REQUIRED message for as long as the vehicle If the ParkSense switch is pressed, and the system is...
Page 201: Cleaning The Parksense® System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 • When you move the shift lever to the REVERSE Cleaning The ParkSense® System position and ParkSense® is turned off, the instrument Clean the ParkSense® sensors with water, car wash soap cluster will display PARKSENSE OFF message for as and a soft cloth.
Page 202 200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE system misinterpreting a close obstacle as a sensor CAUTION! (Continued) problem, causing the PARKSENSE UNAVAILABLE • The vehicle must be driven slowly when using SERVICE REQUIRED message to be displayed in the ParkSense® in order to be able to stop in time instrument cluster.
Page 203: Parksense® Front And Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 up or moving forward, e.g. during a parking maneuver. WARNING! (Continued) Refer to ParkSense® System Usage Precautions for limi- • Before using ParkSense®, it is strongly recom- tations of this system and recommendations. mended that the ball mount and hitch ball assem- ParkSense®...
Page 204: Parksense® Sensors
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ParkSense® Sensors ParkSense® Warning Display The four ParkSense® sensors, located in the rear fascia/ The ParkSense® Warning screen is located within the bumper, monitor the area behind the vehicle that is Electronic Vehicle Information Center (EVIC) or Driver within the sensors’...
Page 205: Parksense® Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 NOTE: If your vehicle is equipped with a touchscreen, ParkSense® Display this feature can be programmed through the Uconnect® The warning display will turn ON indicating the system system. Refer to “Uconnect® Settings” in “Understand- status when the vehicle is in REVERSE or when the ing Your Instrument Panel”...
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79...
Page 207: Enabling And Disabling Front And/Or Rear Parksense
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Front Park Assist Audible Alerts Center (EVIC)” or “Driver Information Display (DID)” in “Understanding Your Instrument Panel” for further infor- ParkSense® will turn off the Front Park Assist audible mation. alert (chime) after approximately three seconds when an obstacle has been detected, the vehicle is stationary, and Enabling And Disabling Front And/Or Rear brake pedal is applied.
Page 208: Service The Parksense® Park Assist System
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE When the shift lever is moved to REVERSE and the Front Service The ParkSense® Park Assist System or Rear system is disabled, the EVIC/DID will display During vehicle start up, when the ParkSense® System the FRONT PARKSENSE OFF or REAR PARKSENSE has detected a faulted condition, the instrument cluster OFF message for five seconds, followed by a car graphic...
Page 209: Cleaning The Parksense® System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 is functioning properly. These arc alerts will interrupt the If the PARKSENSE UNAVAILABLE SERVICE RE- PARKSENSE UNAVAILABLE WIPE REAR SENSORS , QUIRED message appears in the EVIC/DID, see an PARKSENSE UNAVAILABLE WIPE FRONT SEN- authorized dealer.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • When you turn Front or Rear ParkSense® off, the Failure to do so can result in the system not working instrument cluster will display “FRONT PARKSENSE properly. The ParkSense® system might not detect an OFF”...
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 CAUTION! WARNING! • ParkSense® is only a parking aid and it is unable to • Drivers must be careful when backing up even recognize every obstacle, including small obstacles. when using ParkSense®. Always check carefully Parking curbs might be temporarily detected or not behind your vehicle, look behind you, and be sure detected at all.
Page 212: Parkview® Rear Back Up Camera - If Equipped
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW® REAR BACK UP CAMERA — IF WARNING! (Continued) EQUIPPED • Before using ParkSense®, it is strongly recom- Your vehicle may be equipped with the ParkView® Rear mended that the ball mount and hitch ball assem- Back Up Camera that allows you to see a image of the bly is disconnected from the vehicle when the rear surroundings of your vehicle whenever the shift...
Page 213 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 When the vehicle is shifted out of REVERSE (with camera The following table shows the approximate distances for delay turned ON), The rear camera image will be dis- each zone: played for up to 10 seconds after shifting out of RE- Zones Distance to the rear of VERSE unless the forward vehicle speed exceeds 8 mph...
Page 214: Overhead Console - If Equipped
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE — IF EQUIPPED WARNING! (Continued) The overhead console is located on the headliner above must continue to pay attention while backing up. the review mirror. The overhead console contains the Failure to do so can result in serious injury or death. following features: •...
Page 215: Courtesy/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 (RKE) transmitter, if equipped. These lights are also operated individually as reading lights by pressing on the corresponding lens. Overhead Console Courtesy/Reading Lights Both lights in the overhead console and rear passenger Front Courtesy/Reading Lights compartment will illuminate as courtesy lights when a door is opened, when the dimmer control is rotated to the courtesy light position (full right position), or when the...
Page 216: Garage Door Opener - If Equipped
214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE GARAGE DOOR OPENER — IF EQUIPPED HomeLink® replaces up to three hand-held transmitters that operate devices such as garage door openers, motor- ized gates, lighting or home security systems. The HomeLink® unit is powered by your vehicles 12 Volt battery.
Page 217: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Before You Begin Programming HomeLink® Ensure your vehicle is parked outside of the garage before you begin programming. For efficient programming and accurate transmission of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink®...
Page 218: Programming A Rolling Code
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: • For vehicle’s equipped with Keyless Enter-N-Go™, place the ignition in the RUN position with the Engine ON. • Erasing all channels should only be performed when programming HomeLink® for the first time. Do not erase channels when programming additional buttons.
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 attached to the garage door opener/device motor. cm) away from the HomeLink® button you wish to Firmly push and release the “LEARN” or “TRAIN- program.
Page 220: Programming A Non-Rolling Code
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink® Button Programming A Non-Rolling Code (Rolling Code) For programming Garage Door Openers manufactured To reprogram a channel that has been previously trained, before 1995. follow these steps: 1. Turn the ignition switch to the ON/RUN position. 1.
Page 221 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 NOTE: Reprogramming A Single HomeLink® Button (Non — Rolling Code) • It may take up to 30 seconds or longer in some cases for the channel to train. To reprogram a channel that has been previously trained, follow these steps: •...
Page 222: Canadian/Gate Operator Programming
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Place the hand - held transmitter 1 to 3 inches (3 to 8 Canadian/Gate Operator Programming cm) away from the HomeLink® button you wish to For programming transmitters in Canada/United States program. that require the transmitter signals to “time-out”...
Page 223: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 5. Push and hold the programmed HomeLink® button. 3. Without releasing button proceed with The EVIC/DID will display “CHANNEL # TRANS- “Canadian/Gate Operator Programming” Step 2 and MIT.” If the device is plugged in and activates, pro- follow all remaining steps.
Page 224: Troubleshooting Tips
222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Interactive Display (DID) will display “CLEARING WARNING! CHANNELS.” Release the buttons when the EVIC/DID displays “CHANNELS CLEARED.” Vehicle exhaust contains carbon monoxide, a danger- ous gas. Do not run your vehicle in the garage while The HomeLink®...
Page 225: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 NOTE: WARNING! (Continued) • The transmitter has been tested and it complies with use a garage door opener without these safety fea- FCC and IC rules. Changes or modifications not ex- tures. Call toll-free 1-800-355-3515 or, on the Internet pressly approved by the party responsible for compli- at HomeLink.com for safety information or assis- ance could void the user’s authority to operate the...
Page 226: Power Sunroof - If Equipped
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE POWER SUNROOF — IF EQUIPPED WARNING! The power sunroof switch is located on the overhead • Never leave children unattended in a vehicle, or console between the courtesy/reading lights. with access to an unlocked vehicle. Never leave the Key Fob in or near the vehicle, or in a location accessible to children.
Page 227: Opening Sunroof - Manual Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 Opening Sunroof — Express WARNING! (Continued) Press the switch rearward and release it within one-half • Do not allow small children to operate the sunroof. second and the sunroof will open automatically from any Never allow your fingers, other body parts, or any position.
Page 228: Pinch Protect Feature
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Feature Sunshade Operation This feature will detect an obstruction in the opening of The sunshade can be opened manually. However, the the sunroof during Express Close operation. If an ob- sunshade will open automatically as the sunroof opens. struction in the path of the sunroof is detected, the NOTE: The sunshade cannot be closed if the sunroof is sunroof will automatically retract.
Page 229: Sunroof Maintenance
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 Sunroof Maintenance ELECTRICAL POWER OUTLETS Use only a nonabrasive cleaner and a soft cloth to clean The auxiliary 12 Volt (13 Amp) power outlets can provide the glass panel. power for in-cab accessories designed for use with the standard “cigar lighter”...
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The auxiliary power outlets can be found in the following • Lower left and lower right of the center stack when locations: equipped with a bench seat. CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts.
Page 231 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 • Center console when equipped with bucket seats. • Inside the upper lid of the center storage compartment — if equipped. Power Outlet — Center Console Power Outlet — Upper Lid...
Page 232 230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Rear of the center console storage compartment — Quad Cab® or Crew Cab. Power Outlet — Rear Center Console Fuse Power Outlet — Rear Center Console...
Page 233 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 The key symbol indicates that this outlet can supply power when the key is in the ON/RUN or ACC posi- tions. All accessories connected to the outlet(s) should be removed or turned off when the vehicle is not in use to protect the battery against discharge.
Page 234: Cigar Lighter And Ash Receiver - If Equipped
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CIGAR LIGHTER AND ASH RECEIVER — IF CAUTION! EQUIPPED • Many accessories that can be plugged in draw A removable ash receiver and cigar lighter are available. power from the vehicle’s battery, even when not in For vehicles with a bench seat the cupholder tray can be use (i.e., cellular phones, etc.).
Page 235: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 POWER INVERTER — IF EQUIPPED A 115 Volt (150 Watts Maximum) outlet is located on the center stack of the instrument panel, to the right of the radio. This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts.
Page 236: Cupholders
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Do not insert any objects into the receptacles. • Do not touch with wet hands. • Close the lid when not in use. • If this outlet is mishandled, it may cause an electric shock and failure.
Page 237: Front Instrument Panel Cupholders - Floor Mounted Shifter
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 Front Instrument Panel Cupholders — Floor Rear Cupholder — Quad Cab® Mounted Shifter Quad Cab® vehicles may be equipped with a rear For vehicles equipped with bucket seats there are two cupholder that consists of two cup wells for rear passen- cupholders located in the floor console.
Page 238: Rear Cupholder - Crew Cab
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Crew Cab vehicles may be equipped with a rear cup- Rear Cupholder — Crew Cab holder that consists of two cup wells for rear passenger Crew Cab vehicles are equipped with rear cupholders convenience.
Page 239: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 STORAGE Glove Compartment The glove compartment is located on the passenger side of the instrument panel and features both an upper and lower storage area. Glove Compartment 1 — Upper Glove Compartment 2 — Lower Glove Compartment...
Page 240 238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open the upper glove compartment push upward on To open the lower glove compartment, pull on the handle the handle release. The glove compartment door will to release the latch and lower the glove compartment automatically open.
Page 241: Door Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 Rear Door Storage — Crew Cab Door Storage Storage compartments are located in both the driver and Front Door Storage — If Equipped passenger door trim panels. Storage areas and bottle holders (drivers side only) are located in the door trim panels.
Page 242: Center Storage Compartment - If Equipped
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center Storage Compartment — If Equipped WARNING! The center storage compartment is located between the • This armrest is not a seat. Anyone seated on the driver and passenger seats. The storage compartment armrest could be seriously injured during vehicle provides an armrest and contains both and upper and operation, or a collision.
Page 243 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 Upper Storage Compartment Lower Storage Bin With the upper lid closed, pull on the lower handle to WARNING! open the lower storage bin. Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 244: Second Row In-Floor Storage Bin - If Equipped
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To open in-floor storage bin, lift upward on the handle of Second Row In-Floor Storage Bin — If Equipped the latch and open the lid. In-floor storage bins are located in front of the second row seats and can be used for extra storage.
Page 245: Seatback Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 Seatback Storage Storage (Regular Cab) Located in the back of both the driver and passenger The storage bin is located behind the front seats and runs front seats are pockets that can be used for storage. the length of the cab.
Page 246: Storage And Seats (Crew Cab)
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Storage and Seats (Crew Cab) The Crew Cab models provide additional storage under the rear seats. Lift the seats to access the storage com- partment. To open the storage compartments, lift upward on the handle of the latch and open the lid.
Page 247: Plastic Grocery Bag Retainers (Regular Cab Models)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 Plastic Grocery Bag Retainers (Regular Cab REAR WINDOW FEATURES Models) Rear Window Defroster Retainer hooks which will hold plastic grocery bag handles are built into the back panel of the cab, behind The rear window defroster button is located on the rear seat.
Page 248: Power Sliding Rear Window - If Equipped
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Sliding Rear Window — If Equipped CAUTION! The switch for the power sliding rear window is located Failure to follow these cautions can cause damage to on the overhead console. the heating elements: •...
Page 249: Manual Sliding Rear Window - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 Unfolding The Load Floor/Quad Cab® Manual Sliding Rear Window — If Equipped A locking device in the center of the window helps to 1. Lift the 60/40 seat cushion(s) to the upward position. prevent entry from the rear of the vehicle.
Page 250 248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Unfolding The Load Floor/Crew Cab® 1. Lift the 60/40 seat cushion(s) to the upward position. Load Floor In Open Position 3. Reverse the procedure to store the load floor. Load Floor Legs In Stowed Position 2.
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 Load Floor Legs In Opened Position Load Floor In Open Position 3. Lift the front panel until the load floor unfolds into 4. Reverse the procedure to store the load floor. position.
Page 252 250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Positioning The Load Floor For Storage Access Under Quad Cab® — If Equipped The Seat 1. Lift the 60/40 seat cushion(s) to the upward position. 2. Unsnap the securing snap located at either side of the load floor.
Page 253: Pickup Box
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 Crew Cab® — If Equipped PICKUP BOX The pickup box has many features designed for utility and convenience. Load Floor Securing Straps/Crew Cab® 4. Reverse the procedure to put the load floor back in the secured down position before you operate the vehicle.
Page 254 252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If you are installing a Toolbox, Ladder Rack or WARNING! (Continued) Headache Rack at the front of the Pickup Box, you must • Care should always be exercised when operating a use Mopar Box Reinforcement Brackets that are available vehicle with unrestrained cargo.
Page 255: Cargo Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 There are stampings in the sheet metal on the inner side NOTE: If the vehicle speed remains below 8 mph bulkheads of the box in front of and behind both wheel (13 km/h), the cargo camera image will be displayed housings.
Page 256: Rambox® - If Equipped
254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The Cargo Camera image may be deactivated by RamBox® Integrated Box Side Storage Bins pressing the Uconnect® display. The previous selected Cargo storage bins are located on both sides of the pickup screen will appear.
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 CAUTION! Failure to follow the following items could cause damage to the vehicle: • Assure that all cargo inside the storage bins is properly secured. • Do not exceed cargo weight rating of 150 lb (68 kg) 1500 series vehicles or 300 lbs (136 kg) for 2500 and 3500 series vehicles per bin.
Page 258: Locking And Unlocking Rambox
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) it is recommended that the bin lights be turned off manually using the on/off switch. Cargo bins feature two removable drain plugs (to allow water to drain from bins). To remove plug, pull up on the edge.
Page 259: Rambox® Safety Warning
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 the storage bin, insert the key into the keyhole on the RamBox® Safety Warning pushbutton and turn clockwise to lock or counterclock- Carefully follow these warnings to help prevent personal wise to unlock. Always return the key to the upright injury or damage to your vehicle: (vertical) position before removing the key from the pushbutton.
Page 260: Bed Extender - If Equipped
258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE RamBox® Storage Bin Cover Emergency Release NOTE: In the event of an individual being locked inside Lever — If Equipped the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever As a security measure, a Storage Bin Cover Emergency attached to the storage bin cover latching mechanism.
Page 261 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 1. Make sure the center handle is unlocked using the 2. With the side gates open, position the extender fully vehicle key and rotate the center handle vertically to forward in the bed against the front panel. release the extender side gates.
Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Cargo Tie Down Loop Side Gates Closed 4. Rotate the center handle horizontally to secure the side 5. Lock the center handle using the vehicle key to secure gates in the closed position. the panel into place.
Page 263 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 Divider Position The divider position is intended for managing your cargo and assisting in keeping cargo from moving around the bed. There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo.
Page 264 262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Aligning Gate To Slots Side Gates Closed 3. Rotate the side gates closed so that the outboard ends 5. Lock the center handle to secure the panel into place. are secured into the intended slots of the bed. 4.
Page 265 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 Extender Position The extender position allows you to load the bed of the truck beyond the tail gate. The bed extender will add an additional 15 in (38 cm) in the back of the truck when additional cargo room is needed.
Page 266 264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To install the bed extender into the extender position perform the following: 1. Lower the tailgate. 2. Make sure the center handle is unlocked and rotate the center handle vertically in order to release the ex- tender side gates.
Page 267 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 WARNING! (Continued) • Do not exceed cargo load rating of your vehicle. • Secure all loads to truck utilizing cargo tie downs. • Extender should not be used as cargo tie down. • When vehicle is in motion do not exceed 150 lbs (68 kg) load on the tailgate.
Page 268: Bed Rail Tie-Down System
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bed Rail Tie-Down System CAUTION! The maximum load per cleat should not exceed 250 lbs (113 kg) and the angle of the load on each cleat should not exceed 45 degrees above horizontal, or damage to the cleat or cleat rail may occur.
Page 269 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 out on the cleat and slide it to the detent nearest the To remove the cleats from the utility rail, remove the end desired location. Make sure the cleat is seated in the cap screw located in the center of the end cap, using a detent and tighten the nut.
Page 270: Slide-In Campers
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SLIDE-IN CAMPERS EASY-OFF TAILGATE To simplify mounting of a camper unit with an overhang, Camper Applications the tailgate can be removed. Certain truck models are not recommended for slide-in campers. To determine if your vehicle is excluded, please NOTE: If your vehicle is equipped with a rear camera or refer to the “Consumer Information Truck-Camper Load- RKE the electrical connector must be disconnected prior...
Page 271: Disconnecting The Rear Camera Or Remote Keyless
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 Disconnecting the Rear Camera or Remote Keyless Entry — If Equipped 1. Open the tailgate to access the rear camera or RKE connector bracket located on the rear sill. Locking Tab 3. Disconnect the chassis wiring harness, ensuring the connector bracket does not fall into the sill.
Page 272: Removing The Tailgate
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Connect the tailgate plug (provided in the glove box) to the tailgate wiring harness to ensure that the terminals do not corrode. 6. Tape the tailgate harness and bracket against the forward-facing surface of the tailgate. This will pre- vent damaging the connector and bracket when stor- ing or reinstalling the tailgate.
Page 273: Locking Tailgate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 5. Slide the entire tailgate to the right to free the left side TRI-FOLD TONNEAU COVER — IF EQUIPPED pivot. Your vehicle may be equipped with a Tri-Fold Tonneau Cover which consists of different features: 6.
Page 274: Tri-Fold Tonneau Cover Removal
272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tri-Fold Tonneau Cover Removal To remove the Tonneau Cover follow the following steps: 1. Lower the tailgate to gain access to the first set of two tonneau cover clamps located on the driver and pas- sengers under side of the tonneau cover.
Page 275 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 Semi Clamped Position Proper Released Position 3. Pull down on the clamp wire and push the clamp up NOTE: Be sure the clamp and clamp wire is in the into the proper released position. proper released position.
Page 276 274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Make sure the tonneau cover clamp and clamp wire is in the proper released position. If the clamp and clamp wire is not properly released, damage to the tonneau cover material will result. 4.
Page 277 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 Semi Clamped Position Proper Released Position 7. Pull down on the clamp wire and push the clamp up 8. Be sure to clip both stowage straps together to insure into the proper released position. the cover stays together.
Page 278: Tri-Fold Tonneau Cover Installation
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tri-Fold Tonneau Cover Installation To install the Tonneau Cover follow the following steps: 1. Position the folded Tonneau Cover on the truck bed and push the Cover forward against the front of the truck bed.
Page 279 Semi Clamped Position 3. Push clamp wires up and under the flange of box (or 4. Push clamp handles upward to the clamped position flange of Ram Box rail, if equipped) to the semi to properly engage the clamps. clamped position.
Page 280 278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Clamped Position Improper Clamp Position NOTE: Once clamped, be sure the clamps are not par- 5. Disengage the stowage straps. tially clamped to the truck bed flange. 6. Unfold Tonneau Cover to the intermediate position. NOTE: The vehicle cannot be driven when the Tonneau Cover is in this position.
Page 281 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 Intermediate Position (Vehicle Cannot Be Driven) Fully Unfolded Position 7. Completely unfold the Tonneau Cover. 8. Pull down on the second set of clamp handles to release the clamps from the stowed position.
Page 282 Semi Clamped Position 9. Push clamp wires up and under the flange of box (or 10. Push clamp handles upward to the clamped position flange of Ram Box rail, if equipped) to the semi to properly engage the clamps. clamped position.
Page 283 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 Clamped Position Improper Clamp Position NOTE: Once clamped, be sure the clamps are not par- The Tonneau Cover clamps can be locked when in the tially clamped to the truck bed flange. clamped position by placing a lock through the locking hole.
Page 284: Tri-Fold Tonneau Cover Cleaning
282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! It is the driver’s responsibility to ensure the Tonneau Cover is properly installed on the vehicle. Failure to follow this procedure can result in detachment of the Tonneau Cover from the vehicle and/or damage to the vehicle/Tonneau Cover.
Page 285: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..286 ▫ EVIC Red Telltales .....312 INSTRUMENT CLUSTER —...
Page 286 284 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ DID White Telltales ....345 ▫ CD Player — If Equipped....397 ▫...
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 Uconnect® Voice Recognition ....422 ▫ Voice Text Reply ..... .432 ▫...
Page 288: Instrument Panel Features
286 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Headlight Switch 7 — 115v Power Inverter Outlet 13 — Gear Selector/Transfer Case Position Switch — If Equipped 2 — Instrument Cluster 8 — Power Outlet — If Equipped 14 — Ignition Switch 3 —...
Page 289: Instrument Cluster - Midline (Evic)
UNDERSTANDING YOUR INSTRUMENT PANEL 287 INSTRUMENT CLUSTER — MIDLINE (EVIC) Electronic Vehicle Information Display (EVIC)
Page 290: Instrument Cluster - Premium (Did)
288 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM (DID) Driver Information Display (DID)
Page 291: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 289 If the ABS light remains on or turns on while driving, it INSTRUMENT CLUSTER DESCRIPTIONS indicates that the anti-lock portion of the brake system is 1. Tachometer not functioning and that service is required. However, The tachometer indicates engine speed in Revolutions the conventional brake system will continue to operate Per Minute (RPM x 1000).
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL testing the light will come on when the ignition is first CAUTION! (Continued) turned on and remain on for 15 seconds, then blink for 5 converter damage and power loss will soon occur. seconds, and remain on until the vehicle is started. If the Immediate service is required.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 NOTE: NOTE: The voltmeter may show a gauge fluctuation at various engine temperatures. This cycling operation is • A continuous chime will sound if the vehicle is caused by the post-heat cycle of the intake manifold driven more than 1 mile (1.6 km) with either turn heater system.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL hydraulic system malfunction or that a problem with the If brake failure is indicated, immediate repair is neces- Brake Booster has been detected by the Anti-Lock Brake sary. System (ABS) / Electronic Stability Control (ESC) system. In this case, the light will remain on until the condition WARNING! has been corrected.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 unless the parking brake is applied or a brake fault is 8. Seat Belt Reminder Light detected. If the light does not illuminate, have the light When the ignition switch is first turned to inspected by an authorized dealer. ON/RUN, this light will turn on for four to The light also will turn on when the parking brake is eight seconds as a bulb check.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL 10. Oil Pressure Gauge — If Equipped 14. Fuel Gauge The pointer should always indicate some oil pres- Shows level of fuel in tank when ignition switch is in the sure when the engine is running. A continuous high or ON/RUN position.
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 placard or tire inflation pressure label, you should deter- Your vehicle has also been equipped with a TPMS mine the proper tire inflation pressure for those tires). malfunction indicator to indicate when the system is not operating properly.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Front Fog Light Indicator — If Equipped CAUTION! This indicator will illuminate when the front The TPMS has been optimized for the original fog lights are on. equipment tires and wheels. TPMS pressures and warning have been established for the tire size 18.
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 NOTE: The highest available transmission gear is dis- 22. TOW/HAUL played in the lower right corner of the EVIC/DID The TOW HAUL button is located on the center whenever the Electronic Range Select (ERS) feature is stack upper switch bank.
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: The gauge pointer will likely indicate a higher tempera- ture when driving in hot weather, up mountain grades, • The “ESC Off Indicator Light” and the “ESC or when towing a trailer. It should not be allowed to Activation/Malfunction Indicator Light”...
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 26. Electric Power Steering Malfunction Warning Light — WARNING! If Equipped A hot engine cooling system is dangerous. You or This telltale is on when the Electric Power others could be badly burned by steam or boiling Steering is not operating and needs service.
Page 302 300 UNDERSTANDING YOUR INSTRUMENT PANEL If the light remains lit with the engine running, your 30. Air Suspension Off-Road 2 Indicator Lamp – If vehicle will usually be drivable. However, see an autho- Equipped rized dealer for service as soon as possible. If the light is This light will illuminate when the air suspension system flashing when the engine is running, immediate service is is set to the Off-Road 2 setting.
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 32. 4WD AUTO Indicator Light — If Equipped 33. 4WD Indicator Light — If Equipped This light alerts the driver that the vehicle is in This light alerts the driver that the vehicle is in the four-wheel drive auto mode, and the front the four-wheel drive mode, and the front and axle is engaged, but the vehicle’s power is sent...
Page 304: Electronic Vehicle Information Center (Evic)
302 UNDERSTANDING YOUR INSTRUMENT PANEL The EVIC Menu items consists of the following: ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) • Speedometer The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Info tures a driver-interactive display that is located in the instrument cluster. •...
Page 305 UNDERSTANDING YOUR INSTRUMENT PANEL 303 The system allows the driver to select information by • UP Arrow Button pushing the following EVIC Control buttons located on Push and release the UP arrow button to scroll the left side of the steering wheel: upward through the main menu items.
Page 306: Electronic Vehicle Information Center (Evic) Displays - 3.5" Display
304 UNDERSTANDING YOUR INSTRUMENT PANEL • LEFT Arrow Button Electronic Vehicle Information Center (EVIC) Displays — 3.5” Display Push and release the LEFT arrow button to return to the main menu, to exit the main menu push and release the UP or DOWN arrow to highlight Turn Menu Off, then push and re- lease the RIGHT arrow.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 1. Compass Display The main display area will normally display the main menu or the screens of a selected feature of the main Displays the current direction. For further information, menu. The main display area also displays “pop up” refer to “Compass Settings”...
Page 308: Oil Life Reset
306 UNDERSTANDING YOUR INSTRUMENT PANEL • Unstored Messages Oil Life Reset Your vehicle is equipped with an engine oil change This message type is displayed indefinitely or until the indicator system. The “Oil Change Required” message condition that activated the message is cleared. Examples will display in the EVIC display for approximately 10 of this message type are “Turn Signal On”...
Page 309: Evic Messages
UNDERSTANDING YOUR INSTRUMENT PANEL 307 3. Press and release the RIGHT arrow button to access 3. Press and release the RIGHT arrow button to access the ”Oil Life” screen. the “Vehicle Info” screen then scroll UP or DOWN to select “Oil Life” . 4.
Page 310 308 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Airbag System • Tire Pressure Screen With Low Tire(s) “Inflate Tire to XX” • Traction Control Off • Tire Pressure Information System (TPIS) • Washer Fluid Low • Service Tire Pressure System • Oil Pressure Low •...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Turn Signal On • Remote Start Aborted Time Expired • Sound Horn with Remote Lock: Off; 1st Press; 2nd • Remote Start Disabled Start to Reset Press • Service Airbag System • Vehicle Not in Park •...
Page 312 310 UNDERSTANDING YOUR INSTRUMENT PANEL • Automatic Unavailable Use Autostick Service Req. • Aerodynamic Ride Height Achieved • Transmission Getting Hot Press Brake • Off Road 1 Ride Height Achieved • Trans. Hot Stop Safely Shift to Park Wait to Cool •...
Page 313 UNDERSTANDING YOUR INSTRUMENT PANEL 311 • Battery Low Start Engine To Change Ride Height • Stop/Start Not Ready Engine Temperature Too High – If Equipped • Stop/Start Ready – If Equipped • Stop/Start Not Ready Engine Temperature Too Low – •...
Page 314: Evic Red Telltales
312 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start Not Ready Steering Wheel Turned – If The Reconfigurable Telltales section is divided into the Equipped white telltales area on the right, yellow telltales in the middle, and red telltales on the left. •...
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL 313 Do not operate the vehicle until the cause is corrected. If jump starting is required, refer to “Jump Starting This light does not show how much oil is in the engine. Procedures” in “What To Do In Emergencies”. The engine oil level must be checked under the hood.
Page 316: Evic Yellow Telltales
314 UNDERSTANDING YOUR INSTRUMENT PANEL required. You may experience reduced performance, an • Electric Power Steering Malfunction Warning Light elevated/rough idle or engine stall and your vehicle may This telltale is on when the Electric Power require towing. Steering is not operating and needs service. •...
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 • Windshield Washer Fluid Low Indicator CAUTION! This telltale will turn on to indicate the wind- Continuous driving with the Transmission Tempera- shield washer fluid is low. ture Warning Light illuminated will eventually cause severe transmission damage or transmission failure. •...
Page 318: Evic White Telltales
316 UNDERSTANDING YOUR INSTRUMENT PANEL • Air Suspension Payload Protection Telltale — If EVIC White Telltales Equipped • Electronic Speed Control ON This telltale will turn on to indicate that the This light will turn on when the electronic maximum payload may have been exceeded or speed control is ON.
Page 319: Evic Selectable Menu Items
UNDERSTANDING YOUR INSTRUMENT PANEL 317 • Transmission Temp (Automatic only) EVIC Selectable Menu Items Push and release the UP or DOWN arrow buttons until the • Oil Temp desired Selectable Menu item is highlighted in the EVIC. • Oil Pressure Speedometer •...
Page 320 318 UNDERSTANDING YOUR INSTRUMENT PANEL • Average Fuel Economy value Trip B Push and release Up & Down arrow button until the Trip • Range to Empty B menu item is highlighted in the EVIC. The Trip B Trip A information will display the following: Push and release the UP or DOWN arrow button until •...
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 Air Suspension — If Equipped Push and hold the RIGHT arrow button to reset all the information. Push and release the UP or DOWN arrow button until the Air Suspension menu item is highlighted in the EVIC. EVIC Messages Push and release the RIGHT arrow button to display the •...
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL • Service Electronic Throttle Control • Battery Voltage Low • Service Power Steering • Service Electronic Throttle Control • Cruise Off • Lights On • Cruise Ready • Right Turn Signal Light Out • Cruise Set To XXX MPH •...
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 • Remote Start Aborted Fuel Low • Doors Open • Remote Start Aborted Too Cold • Gear Not Available • Remote Start Aborted Door Open • Shift Not Allowed • Remote Start Aborted Hood Open •...
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL • Transmission Too cold Idle with Engine On • Vehicle Cannot Be Lowered Door Open • Washer Fluid Low • Off Road 2 Watch For Clearance • Service Air Suspension System • Entry/Exit Watch For Clearance •...
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 • Stop/Start Not Ready Fuel Level Low – If Equipped • Stop/Start Not Ready Max Cooling Or Heating Se- lected – If Equipped • Stop/Start Not Ready Steep Incline – If Equipped • Stop/Start Not Ready Front Defrost Selected – If •...
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start To Restart Shift Out Of Park – If Equipped Vehicle Settings Personal Settings allows the driver to set and recall • Stop/Start Off – If Equipped features when the transmission is in PARK. •...
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Language Select Language English, Spanish, French, Italian, German, Dutch Units Units U.S.; Metric ParkSense ParkSense • Notification — Sound Only; Sound & Display •...
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Automatic High- Auto Highbeams On; Off beams Flash Lights with Lights w/ Lock On; Off Lock Auto Lock Doors Auto Lock Doors On;...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Passive Entry Passive Entry On; Off Remote Start Com- Rmt Start Comfort On; Off fort System Easy Exit Seat Easy Exit Seat On;...
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Transport Mode Transport Mode On; Off Wheel Alignment Wheel Alignment On; Off Mode Horn w/ Remote Horn w/ Rmt Lwr On; Off Lower Lights w/ Remote Lights w/ Rmt Lwr...
Page 331 UNDERSTANDING YOUR INSTRUMENT PANEL 329 Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Trailer Name Trailer Name • Trailer # (# is equal to slot position) • Boat • Car • Cargo • Dump •...
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Ab- Setting Names breviated (Left Sub- Sub-Menus (Right Submenu Layer) menu Layer) Compass Variance Compass Var 1-15 increments of 1 Calibrate Compass Compass Cal Cancel; Calibrate Fuel Saver Display Fuel Saver On; Off Turn Menu OFF Push and release the RIGHT arrow button to exit the main menu.
Page 333: Driver Information Display (Did)
UNDERSTANDING YOUR INSTRUMENT PANEL 331 The DID Menu items consists of the following: DRIVER INFORMATION DISPLAY (DID) The Driver Information Display (DID) features a driver- • Digital Speedometer interactive display that is located in the instrument • Vehicle Info cluster. •...
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by • UP Arrow Button pushing the following buttons mounted on the steering Push and release the UP arrow button to scroll wheel: upward through main menu submenus.
Page 335: Driver Information Display (Did) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 333 • LEFT Arrow Button Driver Information Display (DID) Displays Push and release the LEFT arrow button to return to the main menu from an info screen or submenu item. The DID displays are located in the center portion of the cluster and consists of eight sections: 1.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Audio / Phone Information and Sub-menu Informa- The main display area will normally display the main tion — Whenever there are sub-menus available, the menu or the screens of a selected feature of the main position within the sub-menus is shown here.
Page 337: Oil Life Reset
UNDERSTANDING YOUR INSTRUMENT PANEL 335 • Unstored Messages Oil Life Reset Your vehicle is equipped with an engine oil change This message type is displayed indefinitely or until the indicator system. The “Oil Change Required” message condition that activated the message is cleared. Examples will flash in the DID display for approximately 10 of this message type are “Turn Signal On”...
Page 338: Did Messages
336 UNDERSTANDING YOUR INSTRUMENT PANEL 3. Push and release the RIGHT arrow button to access 4. Push and hold the RIGHT arrow button for one the ”Oil Life” screen. second to access the ” Oil Life Reset” screen. 4. Push and hold the RIGHT arrow button for one 5.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 • Traction Control Off • Tire Pressure Information System (TPIS) • Washer Fluid Low • Service Tire Pressure System • Oil Pressure Low • Parking Brake Engaged • Oil Change Due • Brake Fluid Low •...
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL • Sound Horn with Remote Lock: Off; 1st Press; 2nd • Remote Start Disabled Start to Reset Press • Service Airbag System • Vehicle Not in Park • Service Airbag Warning Light • Key in Ignition •...
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 • Transmission Getting Hot Press Brake • Off Road 2 Ride Height Achieved • Trans. Hot Stop Safely Shift to Park Wait to Cool • Entry/Exit Ride Height Achieved • Transmission Cool Ready to Drive •...
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL • Stop/Start Not Ready – If Equipped • Stop/Start Not Ready Driver Seatbelt Unbuckled – If Equipped • Stop/Start Not Ready Hood Open – If Equipped • Stop/Start Not Ready Driver Door Open – If Equipped •...
Page 343: Did Red Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 341 • Stop/Start To Restart Press Clutch Or Shift To Neutral – DID Red Telltales If Equipped This area will show reconfigurable red telltales. These telltales include: • Stop/Start Req’d Fault Detected – If Equipped • Door Ajar •...
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Temperature Warning Light • Electronic Throttle Control (ETC) Light This telltale indicates engine oil temperature is This light informs you of a problem with the high. If the light turns on while driving, stop Electronic Throttle Control (ETC) system.
Page 345: Did Yellow Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 343 • Engine Temperature Warning Light • Electric Power Steering Malfunction Warning Light This light warns of an overheated engine condi- This telltale is on when the Electric Power tion. As temperatures rise and the gauge ap- Steering is not operating and needs service.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL • Windshield Washer Fluid Low Indicator CAUTION! This telltale will turn on to indicate the wind- Continuous driving with the Transmission Tempera- shield washer fluid is low. ture Warning Light illuminated will eventually cause severe transmission damage or transmission failure. •...
Page 347: Did White Telltales
UNDERSTANDING YOUR INSTRUMENT PANEL 345 • Air Suspension Payload Protection Telltale — If • Loose Fuel Filler Cap Equipped This telltale will turn on to indicate that the fuel This telltale will turn on to indicate that the filler cap may be loose. maximum payload may have been exceeded or load leveling cannot be achieved at its current DID White Telltales...
Page 348: Did Selectable Menu Items
RIGHT arrow button to change the display • Tire Pressure Information System (3500 Series Heavy between mph and km/h. Duty Ram Trucks) Vehicle Info • Push and release the UP or DOWN arrow button until “Tire Pressure” is highlighted in the DID. Push and...
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 • If the Tire Pressure system requires service, “Service • Transmission Temp. (automatic only) Tire Pressure System” is displayed. • Oil Temperature • Oil Pressure • Tire PSI is an information only function and cannot be reset.
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL Trip A Trip B Push and release the UP or DOWN arrow The Trip B information will display the button until the Trip A icon/title is highlighted following: in the DID. The Trip A information will display the following: •...
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 Stop/Start – If Equipped Audio Push and release the UP or DOWN arrow Push and release the UP or DOWN arrow button until the Stop/Start icon is highlighted button until the Audio display icon is high- in the DID.
Page 352 350 UNDERSTANDING YOUR INSTRUMENT PANEL Screen Setup Vehicles Settings (Customer-Programmable Features) Push and release the UP or DOWN arrow NOTE: This feature is only available on 5.0 and button until the Screen Setup display icon is 8.4 Uconnect® Radios highlighted in the DID. Push and release the RIGHT arrow button to enter the Screen Setup Personal Settings allows the driver to set and recall submenu.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Language Select Language English, Spanish, French, Italian, German, Dutch Units Units U.S.; Metric ParkSense ParkSense • Notification — Sound Only; Sound & Display •...
Page 354 352 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Headlights On with Wipers Lights w/ Wipers On; Off Automatic Highbeams Auto Highbeams On; Off Flash Lights with Lock Lights w/ Lock On; Off Auto Lock Doors Auto Lock Doors On;...
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Commercial Settings Commercial • Aux Switches • Power Take-Off • PIN Setup Air Suspension Display Alerts Air Susp. Alerts All; Warnings Only Aero Ride Height Mode Aero Mode On;...
Page 356 354 UNDERSTANDING YOUR INSTRUMENT PANEL Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Trailer Name Trailer Name • Trailer # (# is equal to slot position) • Boat • Car • Cargo • Dump • Equipment •...
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 Setting Names Abbreviated Sub-Menus (Right Submenu Setting Names (Left Submenu Layer) Layer) Compass Variance Compass Var 1-15 increments of 1 Calibrate Compass Compass Cal Cancel; Calibrate Fuel Saver Display Fuel Saver On; Off Park Assist Front Chime Vol- Park Assist Front Chime Vol- On;...
Page 358: Uconnect® Settings
356 UNDERSTANDING YOUR INSTRUMENT PANEL Uconnect® SETTINGS The Uconnect® system uses a combination of buttons on the touchscreen and buttons on the faceplate located on the center of the instrument panel that allows you to access and change the customer programmable features. Many features can vary by vehicle.
Page 359: Buttons On The Faceplate
UNDERSTANDING YOUR INSTRUMENT PANEL 357 Buttons On The Faceplate Buttons on the faceplate are located below the Uconnect® system in the center of the instrument panel. In addition, there is a Scroll/Enter control knob located on the right side of the Climate Controls in the center of the instru- ment panel.
Page 360: Buttons On The Touchscreen
358 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Only one category may be selected at a time. Buttons On The Touchscreen Buttons on the touchscreen are accessible on the When making a selection, press the button on the touch- Uconnect® display. screen to enter the desired mode. Once in the desired mode, press and release the preferred setting until the Customer Programmable Features —...
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 Display • Units After pressing the “Display” button on the touchscreen When in this display, you may select to have the EVIC/ the following settings will be available. DID, odometer, and navigation system (if equipped) changed between US and Metric units of measure.
Page 362 360 UNDERSTANDING YOUR INSTRUMENT PANEL Display” button on the touchscreen select from “On” or touchscreen and select from “Always,” “With Help” or “Off.” Press the back arrow/Done button on the touch- “Never.” Press the back arrow/Done button on the screen to return to the previous menu. touchscreen to return to the previous menu.
Page 363 UNDERSTANDING YOUR INSTRUMENT PANEL 361 arrows above and below the current date to adjust. Press • Tilt Mirrors In Reverse — If Equipped the back arrow/Done button on the touchscreen to return When this feature is selected, the exterior sideview to the previous menu.
Page 364 362 UNDERSTANDING YOUR INSTRUMENT PANEL entire surroundings” across the top of the screen. After Assistance” button on the touchscreen. Press the five seconds, this note will disappear. To make your “Parkview Backup camera Delay” button on the touch- selection, press the “ParkView® Backup Camera Active screen to turn the ParkView®...
Page 365 UNDERSTANDING YOUR INSTRUMENT PANEL 363 Lights press the “Illuminated Approach” button on the touch- screen and choose either “0,” “30,” “60,” or “90” buttons After pressing the “Lights” button on the touchscreen, on the touchscreen to select your desired time interval. the following settings will be available: Press the back arrow/Done button on the touchscreen to •...
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL • Auto Dim High Beams — If Equipped • Flash Lights With Lock When this feature is selected, the high beam headlights When this feature is selected, the exterior lights will flash will activate/deactivate automatically under certain con- when the doors are locked or unlocked with the Remote ditions.
Page 367 UNDERSTANDING YOUR INSTRUMENT PANEL 365 or “Off.” Press the back arrow/Done button on the • Sound Horn With Remote Start touchscreen to return to the previous menu. When this feature is selected, the horn will sound when the • Auto Unlock On Exit remote start is activated.
Page 368 366 UNDERSTANDING YOUR INSTRUMENT PANEL • Memory Linked to Fob — If Equipped unlocks the doors when the outside door handle is grabbed. To make your selection, press the “Passive This feature provides automatic driver seat positioning to Entry” button on the touchscreen and select from “On” or enhance driver mobility when entering and exiting the “Off.”...
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 Auto Comfort Systems — If Equipped Engine Off Options After pressing the “Auto-On Comfort” button on the After pressing the “Engine Off Options” button on the touchscreen the following settings will be available: touchscreen the following settings will be available. •...
Page 370 368 UNDERSTANDING YOUR INSTRUMENT PANEL • Engine Off Power Delay Suspension — If Equipped After pressing the “Suspension” button on the touch- When this feature is selected, the power window screen the following settings will be available: switches, radio, Uconnect® phone system (if equipped), DVD video system (if equipped), power sunroof (if •...
Page 371 UNDERSTANDING YOUR INSTRUMENT PANEL 369 • Auto Entry/Exit Suspension • Tire Jack Mode When this feature is selected the air suspension system is When this feature is selected, the vehicle automatically disabled to prevent auto leveling of the suspension, while lowers from ride height position when vehicle shifted to the vehicle is on a jack changing a tire.
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL Trailer Brake Audio After pressing the “Trailer Brake” button on the touch- After pressing the “Audio” button on the touchscreen the screen the following settings will be available: following settings will be available: • Trailer Select •...
Page 373 UNDERSTANDING YOUR INSTRUMENT PANEL 371 • Speed Adjusted Volume button on the touchscreen, select “On” or “Off.” Press the back arrow/Done button on the touchscreen to return to This feature increases or decreases volume relative to the previous menu. vehicle speed. To change the Speed Adjusted Volume •...
Page 374 372 UNDERSTANDING YOUR INSTRUMENT PANEL set, the compass will automatically compensate for the differences, and provide the most accurate compass heading. NOTE: Keep magnetic materials away from the top of the instrument panel, such as iPod’s, Mobile Phones, Lap- tops and Radar Detectors. This is where the compass module is located, and it can cause interference with the compass sensor, and it may give false readings.
Page 375 UNDERSTANDING YOUR INSTRUMENT PANEL 373 by pressing the “ON” button on the touchscreen and • Channel Skip completing one or more 360-degree turns (in an area free SiriusXM can be programmed to designate a group of from large metal or metallic objects). The compass will channels that are the most desirable to listen to or to now function normally.
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL Write down the SIRIUS ID numbers for your receiver. To “Yes” to restore, or “Cancel” to exit. Press back arrow/ reactivate your service, either call the number listed on Done button to return to the previous menu. the screen or visit the provider online.
Page 377: Customer Programmable Features - Uconnect® 8.4A/8.4An Personal Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 375 System Information Locks, Auto-On Comfort (if equipped), Engine Off Op- tions, Suspension, Trailer Brake, Audio, Phone/ After pressing the “System Information” button on the Bluetooth®, SiriusXM Setup (if equipped), Restore Set- touchscreen the following information will be available: tings, Clear Personal Data and System Information.
Page 378 376 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: All settings should be changed with the ignition • Display Brightness With Headlights On in the “Run” position. When in this display, you may select the brightness with Display the headlights on. Adjust the brightness with the “+” and “–”...
Page 379 UNDERSTANDING YOUR INSTRUMENT PANEL 377 • Set Theme • Units This feature will allow you to choose a background When in this display, you may select to have the Driver theme for the display screen. The theme will change the Information Display (DID), odometer, and navigation background color, highlight color, and button color of the system (if equipped) changed between US and Metric...
Page 380 378 UNDERSTANDING YOUR INSTRUMENT PANEL • Navigation Turn-By-Turn In Cluster — If Equipped • Fuel Saver Display — If Equipped When this feature is selected, the turn-by-turn directions This feature will allow you to enable fuel saver mode and will be displayed in the DID. Press the “Fuel Saver will appear in the display as the vehicle approaches a Display”...
Page 381 UNDERSTANDING YOUR INSTRUMENT PANEL 379 • Show Command List • Set Time Hours When in this display, you may change the Show Com- This feature will allow you to adjust the hours. The “Sync mand List settings. To change the Show Command List with GPS Time”...
Page 382 380 UNDERSTANDING YOUR INSTRUMENT PANEL • Time Format • ParkSense® This feature will allow you to select the time format The Rear Park Assist system will scan for objects behind display setting. Press the “Time Format” button on the the vehicle when the transmission shift lever is in RE- touchscreen and select from “12hrs”...
Page 383 UNDERSTANDING YOUR INSTRUMENT PANEL 381 or “High” buttons on the touchscreen. Press the back position and the transmission shift lever is in the RE- arrow button on the touchscreen to return to the previous VERSE position. The mirrors will move back to their menu.
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL on the touchscreen, until a check-mark appears next to • ParkView® Backup Camera Delay the setting, indicating that the setting had been selected. When this feature is enabled, it will allow the ParkView Press the back arrow button on the touchscreen to return Backup Camera display to remain on while in drive for to the previous menu.
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 • Hill Start Assist — If Equipped Lights After pressing the “Lights” button on the touchscreen the When this feature is selected, the Hill Start Assist (HSA) following settings will be available. system is active. Refer to “Electronic Brake Control System”...
Page 386 384 UNDERSTANDING YOUR INSTRUMENT PANEL • Headlights With Wipers — If Equipped next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen to return When this feature is selected, and the headlight switch is to the previous menu.
Page 387 UNDERSTANDING YOUR INSTRUMENT PANEL 385 Doors & Locks appears next to setting, showing that setting has been selected. Press the back arrow button on the touchscreen After pressing the “Doors & Locks” button on the touch- to return to the previous menu. screen the following settings will be available: •...
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL press the “Sound Horn With Lock” button on the touch- When Unlock “All Doors” On 1st Press is selected, all of screen and select from “Off”, “1st Press” or “2nd Press”. the doors will unlock on the first push of the RKE Press the back arrow button on the touchscreen to return transmitter UNLOCK button.
Page 389 UNDERSTANDING YOUR INSTRUMENT PANEL 387 • Passive Entry NOTE: The seat will return to the memorized seat location (if Personal Settings Linked To Key Fob is set to This feature allows you to lock and unlock the vehicles ON) when the Remote Keyless Entry (RKE) transmitter is door(s) without having to push the Remote Keyless Entry used to unlock the door.
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL button on the touchscreen, then select either “Off,” “Re- DVD video system (if equipped), power sunroof (if mote Start” or “All Starts”. Press the back arrow button on equipped), and power outlets will remain active for up to the touchscreen to return to the previous menu.
Page 391 UNDERSTANDING YOUR INSTRUMENT PANEL 389 Air Suspension — If Equipped system has been activated or the check-mark is removed showing the system has been deactivated. After pressing the “Suspension” button on the touch- screen the following settings will be available. •...
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL the feature showing the system has been activated or the Trailer Brake check-mark is removed showing the system has been After pressing the “Trailer Brake” button on the touch- deactivated. screen the following settings will be available: •...
Page 393 UNDERSTANDING YOUR INSTRUMENT PANEL 391 until a check-mark appears next to the setting, showing arrows to adjust, tap the “C” icon to readjust to the center. that the setting has been selected. Refer to “Integrated Press the back arrow button on the touchscreen to return Trailer Brake Module”...
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL • Surround Sound — If Equipped the touchscreen, select “On” or “Off.” Press the back arrow button on the touchscreen to return to the previous This feature provides simulated surround sound mode. menu. To make your selection, press the “Surround Sound” button on the touchscreen, select “On”...
Page 395 UNDERSTANDING YOUR INSTRUMENT PANEL 393 SiriusXM Setup — If Equipped Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen. After pressing the “SiriusXM Setup” button on the touch- screen, the following settings will be available: Write down the SIRIUS ID numbers for your receiver.
Page 396: Uconnect® Radios - If Equipped
394 UNDERSTANDING YOUR INSTRUMENT PANEL settings to default?” select “OK” to restore, or “Cancel” to System Information exit. Once the settings are restored, a pop-up appears After pressing the “System Information” button on the stating settings reset to default. touchscreen the following settings will be available: Clear Personal Data •...
Page 397: Ipod®/Usb/Mp3 Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 395 iPod®/USB/MP3 CONTROL — IF EQUIPPED Located inside the center console upper lid, this feature allows an iPod® or external USB device to be plugged into the USB port. iPod® control supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone®...
Page 398: Steering Wheel Audio Controls - If Equipped
396 UNDERSTANDING YOUR INSTRUMENT PANEL The right hand control is a rocker type switch with a STEERING WHEEL AUDIO CONTROLS — IF pushbutton in the center. Pushing the top of the switch EQUIPPED will increase the volume, and pushing the bottom of the The remote sound system controls are located on the back switch will decrease the volume.
Page 399: Radio Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 397 Radio Operation CD/DVD DISC MAINTENANCE Pushing the top of the switch will SEEK up for the next To keep a CD/DVD in good condition, take the following listenable station and pushing the bottom of the switch precautions: will SEEK down for the next listenable station.
Page 400: Radio Operation And Mobile Phones
398 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular Regulatory And Safety Information disc, it may be damaged (e.g., scratched, reflective coat- USA/CANADA ing removed, a hair, moisture or dew on the disc) Exposure to Radio Frequency Radiation oversized, or have protection encoding.
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 situations or environments, such as aboard airplanes. If NOTE: you are unsure of restrictions, you are encouraged to ask • This equipment has been tested and found to comply for authorization before turning on the wireless radio. with the limits for a Class B digital device, pursuant to This device complies with Part 15 of the FCC Rules and Part 15 of the FCC Rules.
Page 402: Climate Controls
400 UNDERSTANDING YOUR INSTRUMENT PANEL • Consult the dealer or an experienced radio technician for help. CLIMATE CONTROLS The Climate Control System allows you to regulate the temperature, amount, and direction of air circulating throughout the vehicle. The controls are located on the instrument panel below the radio.
Page 403 UNDERSTANDING YOUR INSTRUMENT PANEL 401 Front Blower Control Air Conditioning Operation There are four blower speeds. Use this Push the A/C button to engage the Air control to regulate the amount of air Conditioning (A/C). A LED will illu- forced through the system in any minate when the A/C system is mode you select.
Page 404 402 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: A/C cannot be deselected when in MAX A/C Panel Mode position. The LED will blink three times if the A/C button is pushed. If your air conditioning performance Air is directed through the outlets in the instru- seems lower than expected, check the front of the A/C ment panel.
Page 405 UNDERSTANDING YOUR INSTRUMENT PANEL 403 Floor Mode with maximum blower and warm temperature settings for best windshield and side window defrosting. Air is directed through the floor outlets with a NOTE: The air conditioning compressor operates in MIX small amount through the defrost and side win- and DEFROST, or a blend of these modes even if the A/C dow demist outlets.
Page 406 404 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Air Outlets The airflow from each of the instrument panel outlets can be • If the RECIRCULATION button is pushed when the adjusted for direction, and turned on or off to control airflow. system is in Defrost mode, the Recirculation LED indicator will flash three times and then turn off to NOTE: For maximum airflow to the rear, the center indicate Recirculation mode is not allowed.
Page 407: Manual Climate Controls With Touchscreen - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 405 Buttons On The Touchscreen Manual Climate Controls With Touchscreen — If Equipped Buttons on the touchscreen are accessible on the radio. Buttons On The Faceplate The buttons on the faceplate are located below the radio touchscreen.
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL Button Descriptions (Applies To Both Buttons On The 3. Recirculation Button Faceplate and Buttons On The Touchscreen) Press and release to change the current setting; the 1. MAX A/C Button indicator illuminates when ON. Press and release to toggle between MAX A/C and the 4.
Page 409 UNDERSTANDING YOUR INSTRUMENT PANEL 407 equipped). An indicator will illuminate when the rear 6. Modes window defroster is on. The rear window defroster The airflow distribution mode can be adjusted so air automatically turns off after 10 minutes. comes from the instrument panel outlets, floor outlets, and demist outlets.
Page 410 408 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: BI-LEVEL mode is designed under comfort con- 7. Blower Control ditions to provide cooler air out of the panel outlets and Blower control is used to regulate the amount of air warmer air from the floor outlets. forced through the climate system.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 8. Climate Control OFF Button Recirculation Control Press and release this button to turn the Climate Control When outside air contains smoke, odors, or ON/OFF. high humidity, or if rapid cooling is desired, 9. Temperature Control Down Button you may wish to recirculate interior air by Push the button on the faceplate for cooler temperature pressing the RECIRCULATION control button.
Page 412: Automatic Climate Controls With Touchscreen
410 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Climate Controls With Touchscreen — CAUTION! If Equipped Do not attach any object to touchscreen, doing so can Buttons On The Faceplate result in damage to the touchscreen. The buttons on the faceplate are located below the Uconnect®...
Page 413 UNDERSTANDING YOUR INSTRUMENT PANEL 411 Buttons On The Touchscreen Buttons on the touchscreen are accessible on the Uconnect® system screen. Uconnect® 8.4 Automatic Temperature Controls — Buttons On The Touchscreen Button Descriptions (Applies To Both Buttons On The Faceplate And Buttons On The Touchscreen) Uconnect®...
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL this function again will cause the MAX A/C operation to 5. Front Defrost Button switch into manual mode and the MAX A/C indicator Press and release to change the current airflow setting to will turn off. Defrost mode.
Page 415 UNDERSTANDING YOUR INSTRUMENT PANEL 413 temperature settings or on the touchscreen, press and CAUTION! slide the temperature bar towards the red arrow for warmer temperature settings. Failure to follow these cautions can cause damage to the heating elements: NOTE: Pressing this button while in Sync mode will •...
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL when this feature is enabled. Sync is used to synchronize Button On The Touchscreen the passenger temperature setting with the driver tem- Use the small blower icon to reduce the blower setting perature setting. Changing the passenger temperature and the large blower icon to increase the blower setting.
Page 417 UNDERSTANDING YOUR INSTRUMENT PANEL 415 • Bi-Level Mode 12. Climate Control OFF Button Air comes from the instrument panel outlets Press and release this button to turn the Climate Control and floor outlets. A slight amount of air is ON/OFF. directed through the defrost and side window demis- 13.
Page 418: Climate Control Functions
416 UNDERSTANDING YOUR INSTRUMENT PANEL temperature settings or on the touchscreen, press and cool dehumidified air will flow through the outlets into slide the temperature bar towards the red arrow for the cabin. For improved fuel economy, press the A/C warmer temperature settings.
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 behind the radiator and through the condenser. Fabric Recirculation Control front fascia protectors may reduce airflow to the condenser, reducing air conditioning performance. When outside air contains smoke, odors, or high humidity, or if rapid cooling is desired, MAX A/C you may wish to recirculate interior air by MAX A/C sets the control for maximum cooling perfor-...
Page 420: Automatic Temperature Control (Atc)
418 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: In cold weather, use of Recirculation mode may 2. Next, adjust the temperature you would like the system to maintain by adjusting the driver and pas- lead to excessive window fogging. The recirculation senger temperature buttons on the faceplate or but- feature may be unavailable (button on the touchscreen tons on the touchscreen.
Page 421: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 419 To provide you with maximum comfort in the Automatic NOTE: Each of these features operates independently mode, during cold start-ups the blower fan will remain from each other. If any feature is controlled manually, on low until the engine warms up. The blower will temperature control will continue to operate automati- increase in speed and transition into Auto mode.
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL Winter Operation Window Fogging and Frosting To ensure the best possible heater and defroster perfor- Vehicle windows tend to fog on the inside of the glass in mance, make sure the engine cooling system is functioning mild, rainy and/or humid weather.
Page 423 UNDERSTANDING YOUR INSTRUMENT PANEL 421 Control Setting Suggestions For Various Weather Conditions Operating Tips Chart...
Page 424: Uconnect® Voice Recognition
422 UNDERSTANDING YOUR INSTRUMENT PANEL Key Features: Uconnect® Voice Recognition • 5” touchscreen Introducing Uconnect® Start using Uconnect® Voice Recognition with these • Three buttons on either side of the display helpful quick tips. It provides the key Voice Commands and tips you need to know to control your Uconnect®...
Page 425: Get Started
UNDERSTANDING YOUR INSTRUMENT PANEL 423 If you see the icon on your touchscreen, you have 3. Speak clearly at a normal pace and volume while the Uconnect® 8.4AN system. If not, you have a facing straight ahead. The microphone is positioned Uconnect®...
Page 426: Basic Voice Commands
424 UNDERSTANDING YOUR INSTRUMENT PANEL Two buttons are all you need to control your Uconnect® Basic Voice Commands system with your voice. The basic Voice Commands below can be given at any point while using your Uconnect® system. Push the VR button .
Page 427 UNDERSTANDING YOUR INSTRUMENT PANEL 425 Uconnect® 5.0 Uconnect® 8.4A/8.4AN...
Page 428: Radio
426 UNDERSTANDING YOUR INSTRUMENT PANEL Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio® stations you would like to hear. (Sub- scription or included SiriusXM Satellite Radio® trial required.) Push the VR button . After the beep, say •...
Page 429: Media
UNDERSTANDING YOUR INSTRUMENT PANEL 427 Media Uconnect® offers connections via USB, SD, Bluetooth® and auxiliary ports (If Equipped). Voice operation is only available for connected USB and iPod® devices. (Remote CD player optional and not available on all vehicles.) Push the VR button .
Page 430 428 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Press the Browse button on the touchscreen to see all of the music on your iPod® or USB device. Your Voice Command must match exactly how the artist, album, song and genre information is displayed. Uconnect®...
Page 431: Climate (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 429 Climate (8.4A/8.4AN) Too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead. (If vehicle is equipped with climate control.) Push the VR button . After the beep, say one of the following commands: •...
Page 432: Navigation (8.4A/8.4An)
430 UNDERSTANDING YOUR INSTRUMENT PANEL Navigation (8.4A/8.4AN) The Uconnect® navigation feature helps you save time and become more productive when you know exactly how to get to where you want to go. (Navigation is optional on the Uconnect® 8.4A system. See your dealer to activate navigation at any time.) 1.
Page 433: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 431 TIP: When providing a Voice Command, push the Phone Phone button and say “Call,” then pronounce the Making and answering hands-free phone calls is easy name exactly as it appears in your phone book. When with Uconnect®.
Page 434: Voice Text Reply
432 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Once an incoming text message is read to you, push the Phone button . After the beep, say: “Reply.” 2. Listen to the Uconnect® prompts. After the beep, repeat one of the pre-defined messages and follow the system prompts.
Page 435: Uconnect® Access* (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 433 TIP: Your mobile phone must have the full implementa- 9-1-1 Call tion of the Message Access Profile (MAP) to take advan- Theft Alarm Notification tage of this feature. For details about MAP, visit Remote Door Lock/Unlock UconnectPhone.com.
Page 436: Register (8.4A/8.4An)
434 UNDERSTANDING YOUR INSTRUMENT PANEL Register (8.4A/8.4AN) 1. Press the Apps button on the bottom of the 8.4-inch touchscreen. 2. If a pop-up message appears, press Register or go to the Favorite Apps menu and press Uconnect® Regis- tration. 3. Read through the registration instructions. Enter and confirm your personal email address.
Page 437: Mobile App (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 435 Download the Uconnect® Access App to a compatible Mobile App (8.4A/8.4AN) Apple® or Android® mobile devices. All you need to do is: Securely link your mobile device to your vehicle with the Uconnect® Access App. Once you have downloaded the 1.
Page 438: Voice Texting (8.4A/8.4An)
436 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Voice Texting (8.4A/8.4AN) 1. To send a message, push the Phone button . After • Not compatible with iPhone®. the beep, say the following command: “Send mes- • Messages are limited to 140 characters. sage to John Smith.”...
Page 439 UNDERSTANDING YOUR INSTRUMENT PANEL 437 4. Once the YELP® home screen appears on the touch- screen, push the VR button , then say: “YELP search.” 5. Listen to the system prompts and after the beep, tell Uconnect® the place or business that you’d like Uconnect®...
Page 440: Siriusxm Travel Link™ (8.4A/8.4An)
438 UNDERSTANDING YOUR INSTRUMENT PANEL SiriusXM Travel Link™ (8.4A/8.4AN) Need to find a gas station, view local movie listings, check a sports score or the 5 - day weather forecast? SiriusXM Travel Link™ is a suite of services that brings a wealth of information right to your Uconnect®...
Page 441: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 439 Mon. – Fri., 7:00 am – 12:00 am, ET Additional Information © 2014 Chrysler Group LLC. All rights reserved. Mopar Sat., 8:00 am – 10:00 pm, ET and Uconnect are registered trademarks and Mopar Sun., 9:00 am – 5:00 pm, ET Owner Connect is a trademark of Chrysler Group LLC.
Page 443: Starting And Operating
STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....448 ▫ Automatic Mode ..... .453 ▫...
Page 444 442 STARTING AND OPERATING ▫ Brake/Transmission Shift Interlock System . . .461 ▫ Electronically Shifted Transfer Case (Five-Position Switch) — If Equipped ....509 ▫ Eight-Speed Automatic Transmission — If Equipped .
Page 445 STARTING AND OPERATING 443 ▫ Electronic Vehicle Information Center ▫ Hill Climbing ......540 (EVIC)/Driver Information Display (DID) ▫...
Page 446 444 STARTING AND OPERATING ▫ After Driving Off-Road ....555 ▫ Hydraulic Brake Assist — 2500/3500 Models Only (Except Power Wagon) ....581 WINCH USAGE —...
Page 447 STARTING AND OPERATING 445 ▫ Tire Identification Number (TIN)...600 ▫ Life Of Tire ......618 ▫...
Page 448 446 STARTING AND OPERATING ▫ 3.6L Engine ......634 ▫ Fuel Requirements ....641 ▫...
Page 449 STARTING AND OPERATING 447 ▫ Trailer Hitch Type and Maximum Trailer ▫ 2500/3500 Models Only ....670 Weight ......656 RECREATIONAL TOWING (BEHIND ▫...
Page 450: Starting Procedures
448 STARTING AND OPERATING STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust both to children, and do not leave the ignition of a vehicle inside and outside mirrors, and fasten your seat belt. equipped with keyless Enter-N-Go in the ACC or ON/RUN mode.
Page 451: Automatic Transmission
STARTING AND OPERATING 449 Automatic Transmission Keyless Enter-N-Go™ Start the engine with the transmission in PARK position. Apply the brake before shifting into any driving range. This feature allows the driver to oper- ate the ignition switch with the push NOTE: of a button, as long as the Remote •...
Page 452 450 STARTING AND OPERATING 4. If you wish to stop the cranking of the engine prior to off. The ignition switch position will remain in the ACC the engine starting, push the button again. position until the shift lever/gear selector is in PARK and the button is pressed twice to the OFF position.
Page 453: Extreme Cold Weather (Below -20°F Or −29°C)
STARTING AND OPERATING 451 ENGINE START/STOP Button Functions — With Extreme Cold Weather (Below –20°F Or −29°C) Driver’s Foot OFF The Brake Pedal (In PARK Or To ensure reliable starting at these temperatures, use of NEUTRAL Position) an externally powered electric engine block heater (avail- The ENGINE START/STOP button operates similar to an able from your authorized dealer) is recommended.
Page 454: After Starting
452 STARTING AND OPERATING If the engine has been flooded, it may start to run, but not WARNING! have enough power to continue running when the igni- tion button/key is released. If this occurs, continue • Never pour fuel or other flammable liquids into cranking with the accelerator pedal pushed all the way to the throttle body air inlet opening in an attempt to the floor.
Page 455: Stop/Start System - If Equipped
STARTING AND OPERATING 453 To Activate The Autostop Mode, The Following Must STOP/START SYSTEM — IF EQUIPPED Occur: The Stop/Start function is developed to save fuel and reduce emissions. The system will stop the engine auto- 1. The system must be in STOP/START READY state. A matically during a vehicle stop if the required conditions STOP/START READY message will be displayed in the are met.
Page 456: Possible Reasons The Engine Does Not Autostop
454 STARTING AND OPERATING • Engine has not reached normal operating temperature Possible Reasons The Engine Does Not Autostop Prior to engine shut down, the system will check many • Battery discharged safety and comfort conditions to see if they are fulfilled. •...
Page 457: To Start The Engine While In Autostop Mode
STARTING AND OPERATING 455 • Low brake vacuum (e.g. after several brake pedal To Start The Engine While In Autostop Mode applications) While in DRIVE the engine will start when the brake pedal is released or the throttle pedal is depressed. The •...
Page 458: To Manually Turn Off The Stop Start System
456 STARTING AND OPERATING The engine may then be restarted by moving the trans- To Manually Turn Off The Stop Start System mission shift selector out of PARK (e.g. to DRIVE) or, in 1. Press the STOP/START Off switch (located on the some cases, only by a KEY START.
Page 459: To Manually Turn On The Stop Start System
STARTING AND OPERATING 457 2. The STOP/START OFF message will appear in Elec- To Manually Turn On The Stop Start System tronic Vehicle Information Center (EVIC)/Driver In- 1. Press the STOP/START Off switch (located on the formation Display (DID). Refer to “Electronic Vehicle switch bank).
Page 460: Engine Block Heater - If Equipped
458 STARTING AND OPERATING It includes a removable cap that is secured by a tethered ENGINE BLOCK HEATER — IF EQUIPPED strap. It also has a c-clip that is used for storage when not The engine block heater warms the engine, and permits in use for the winter months.
Page 461: Automatic Transmission
STARTING AND OPERATING 459 AUTOMATIC TRANSMISSION WARNING! CAUTION! • It is dangerous to shift out of PARK or NEUTRAL if the engine speed is higher than idle speed. If Damage to the transmission may occur if the follow- your foot is not firmly pressing the brake pedal, the ing precautions are not observed: vehicle could accelerate quickly forward or in re- •...
Page 462 460 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 463: Key Ignition Park Interlock
STARTING AND OPERATING 461 the transmission out of PARK, the ignition switch must Key Ignition Park Interlock be turned to the ON/RUN position (engine running, for This vehicle is equipped with a Key Ignition Park Inter- vehicles with eight-speed transmission) and the brake lock which requires the transmission to be in PARK pedal must be pressed.
Page 464 462 STARTING AND OPERATING speeds (refer to Brake/Transmission Shift Interlock Sys- (ERS) shift control (refer to Electronic Range Select (ERS) tem in this section). To shift past multiple gear ranges at Operation in this section for further information). Press- once (such as Park to Drive), simply rotate the gear ing the GEAR-/GEAR+ switches (on the steering wheel) selector to the appropriate detent.
Page 465 STARTING AND OPERATING 463 Gear Ranges When parking on a hill, apply the parking brake before shifting the transmission to PARK. As an added precau- DO NOT race the engine when shifting from PARK or tion, turn the front wheels toward the curb on a downhill NEUTRAL into another gear range.
Page 466 464 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • Unintended movement of a vehicle could injure if the engine speed is higher than idle speed. If those in or near the vehicle. As with all vehicles, your foot is not firmly pressing the brake pedal, the you should never exit a vehicle while the engine is vehicle could accelerate quickly forward or in re-...
Page 467 STARTING AND OPERATING 465 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with • DO NOT race the engine when shifting from access to an unlocked vehicle. Allowing children to PARK or NEUTRAL into another gear range, as this be in a vehicle unattended is dangerous for a can damage the drivetrain.
Page 468 466 STARTING AND OPERATING REVERSE (R) CAUTION! This range is for moving the vehicle backward. Shift into Towing the vehicle, coasting, or driving for any other REVERSE only after the vehicle has come to a complete reason with the transmission in NEUTRAL can cause stop.
Page 469 STARTING AND OPERATING 467 When frequent transmission shifting occurs (such as result in transmission damage, Transmission Limp Home when operating the vehicle under heavy loading condi- Mode is activated. In this mode, the transmission may tions, in hilly terrain, traveling into strong head winds, or operate only in certain gears, or may not shift at all.
Page 470 468 STARTING AND OPERATING 2. Shift the transmission into PARK, if possible. If not, Electronic Range Select (ERS) Operation — shift the transmission to NEUTRAL. Eight-Speed Transmission The Electronic Range Select (ERS) shift control allows the 3. Push and hold the ignition switch until the engine driver to limit the highest available gear when the turns OFF.
Page 471 STARTING AND OPERATING 469 WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. When to Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the TOW/HAUL switch to activate TOW/ HAUL mode.
Page 472: Six-Speed Automatic Transmission - 1500 Models Only (If Equipped)
470 STARTING AND OPERATING Six-Speed Automatic Transmission — 1500 Models Only (If Equipped) The transmission gear position display (located in the instrument cluster) indicates the transmission gear range. The shift lever is mounted either on the right side of the steering column (if equipped) or on the console (if equipped).
Page 473 STARTING AND OPERATING 471 Only shift from DRIVE to PARK or REVERSE when the NOTE: After selecting any gear range, wait a moment to accelerator pedal is released and the vehicle is stopped. allow the selected gear to engage before accelerating. Be sure to keep your foot on the brake pedal when This is especially important when the engine is cold.
Page 474 472 STARTING AND OPERATING WARNING! WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL • Never use the PARK position as a substitute for the if the engine speed is higher than idle speed. If parking brake. Always apply the parking brake your foot is not firmly pressing the brake pedal, the fully when parked to guard against vehicle move- vehicle could accelerate quickly forward or in re-...
Page 475 STARTING AND OPERATING 473 WARNING! (Continued) WARNING! (Continued) • Unintended movement of a vehicle could injure • Never leave children alone in a vehicle, or with those in or near the vehicle. As with all vehicles, access to an unlocked vehicle. Allowing children to you should never exit a vehicle while the engine is be in a vehicle unattended is dangerous for a running.
Page 476 474 STARTING AND OPERATING • Release the shift lever and make sure it is fully seated CAUTION! in the PARK gate. • Before moving the shift lever out of PARK, you • Look at the transmission gear position display and must turn the ignition switch from the LOCK/OFF verify that it indicates the PARK position.
Page 477 STARTING AND OPERATING 475 DRIVE (D) WARNING! This range should be used for most city and highway Do not coast in NEUTRAL and never turn off the driving. It provides the smoothest upshifts and down- ignition to coast down a hill. These are unsafe shifts, and the best fuel economy.
Page 478 476 STARTING AND OPERATING Select (ERS) Operation” in this section for further infor- NOTE: Use caution when operating a heavily loaded mation) to select a lower gear range. Under these condi- vehicle at low speeds (such as towing a trailer up a steep tions, using a lower gear range will improve performance grade, or in stop-and-go traffic) during hot weather.
Page 479 STARTING AND OPERATING 477 direct gears only. Normal operation will resume once the 2. Shift the transmission into PARK. transmission temperature has risen to a suitable level. 3. Turn the ignition switch to the OFF position. Transmission Limp Home Mode 4.
Page 480 478 STARTING AND OPERATING Electronic Range Select (ERS) Operation — You can switch between DRIVE and ERS mode at any Six-Speed Transmission (1500 Models Only) vehicle speed. When the shift lever is in the DRIVE position, the transmission will operate automatically, The Electronic Range Select (ERS) shift control allows the shifting between all available gears.
Page 481 STARTING AND OPERATING 479 Column Shift Lever Console Shift Lever To exit ERS mode, simply hold the shift lever to the right (+) (console shift) or press and hold the ERS (+) switch (column shift) until “D” is once again displayed in the instrument cluster.
Page 482 480 STARTING AND OPERATING Overdrive Operation WARNING! The automatic transmission includes an electronically Do not downshift for additional engine braking on a controlled Overdrive (fourth and fifth gears). The trans- slippery surface. The drive wheels could lose their mission will automatically shift into Overdrive if the grip and the vehicle could skid, causing a collision or following conditions are present: personal injury.
Page 483 STARTING AND OPERATING 481 When To Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the TOW/HAUL switch to activate TOW/ HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
Page 484 482 STARTING AND OPERATING NOTE: WARNING! • The torque converter clutch will not engage, and the Do not use the “TOW/HAUL” feature when driving transmission will not shift into the top overdrive gear, in icy or slippery conditions. The increased engine until the transmission fluid and engine coolant are braking can cause the rear wheels to slide, and the warm [usually after 1 to 3 miles (2 to 5 km) of driving].
Page 485: Six-Speed Automatic Transmission - 2500/3500
STARTING AND OPERATING 483 cause damage to the transmission. The torque con- vehicle may be somewhat abrupt. This is a normal verter will refill within five seconds after starting the condition, and precision shifts will develop within a few engine. hundred miles (kilometers).
Page 486 484 STARTING AND OPERATING Gear Ranges When parking on a hill, apply the parking brake before shifting the transmission to PARK, otherwise the load on DO NOT race the engine when shifting from PARK or the transmission locking mechanism may make it diffi- NEUTRAL into another gear range.
Page 487 STARTING AND OPERATING 485 WARNING! (Continued) WARNING! (Continued) • Your vehicle could move and injure you and others • Unintended movement of a vehicle could injure if it is not completely in PARK. Check by trying to those in or near the vehicle. As with all vehicles, move the shift lever out of PARK with the brake you should never exit a vehicle while the engine is pedal released.
Page 488 486 STARTING AND OPERATING WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with • Before moving the shift lever out of PARK, you access to an unlocked vehicle. Allowing children to must turn the ignition switch from the LOCK/OFF be in a vehicle unattended is dangerous for a position to the ON/RUN position, and also press number of reasons.
Page 489 STARTING AND OPERATING 487 • Release the shift lever and make sure it is fully seated WARNING! in the PARK gate. Do not coast in NEUTRAL and never turn off the • Look at the transmission gear position display and ignition to coast down a hill.
Page 490 488 STARTING AND OPERATING DRIVE (D) If the transmission temperature exceeds normal operat- ing limits, the powertrain controller will modify the This range should be used for most city and highway transmission shift schedule and expand the range of driving. It provides the smoothest upshifts and down- torque converter clutch engagement.
Page 491 STARTING AND OPERATING 489 During cold temperatures, transmission operation may PARK, REVERSE, and NEUTRAL will continue to operate. be modified depending on engine and transmission The Malfunction Indicator Light (MIL) may be illuminated. temperature as well as vehicle speed. This feature im- Limp Home Mode allows the vehicle to be driven to an proves warm up time of the engine and transmission to authorized dealer for service without damaging the trans-...
Page 492 490 STARTING AND OPERATING NOTE: Even if the transmission can be reset, we recom- the instrument cluster, and maintain that gear as the top available gear. Once in ERS mode, tapping (-) or (+) will mend that you visit your authorized dealer at your earliest change the top available gear.
Page 493 STARTING AND OPERATING 491 Overdrive Operation WARNING! The automatic transmission includes an electronically Do not downshift for additional engine braking on a controlled Overdrive (fifth and sixth gears). The trans- slippery surface. The drive wheels could lose their mission will automatically shift into Overdrive if the grip and the vehicle could skid, causing a collision or following conditions are present: personal injury.
Page 494 492 STARTING AND OPERATING When To Use TOW/HAUL Mode When driving in hilly areas, towing a trailer, carrying a heavy load, etc., and frequent transmission shifting oc- curs, press the TOW/HAUL switch to activate TOW/ HAUL mode. This will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting.
Page 495 STARTING AND OPERATING 493 NOTE: WARNING! • The torque converter clutch will not engage, and the Do not use the “TOW/HAUL” feature when driving transmission will not shift to sixth gear, until the in icy or slippery conditions. The increased engine transmission fluid and engine coolant are warm [usu- braking can cause the rear wheels to slide, and the ally after 1 to 3 miles (2 to 5 km) of driving].
Page 496: Four-Wheel Drive Operation - If Equipped
494 STARTING AND OPERATING When additional traction is required, the 4H and 4L FOUR-WHEEL DRIVE OPERATION — IF positions can be used to lock the front and rear drive- EQUIPPED shafts together and force the front and rear wheels to Four-wheel drive trucks are equipped with either a rotate at the same speed.
Page 497 STARTING AND OPERATING 495 When operating your vehicle in 4L, the engine speed is NOTE: Delayed shifts out of four-wheel drive may be approximately three times that of the 2H or 4H positions experienced due to uneven tire wear, low or uneven tire at a given road speed.
Page 498 496 STARTING AND OPERATING For additional information on the appropriate use of each transfer case mode position, see the information below: Four-Wheel Drive Low Range — This range locks the front and rear driveshafts together forcing the front and rear wheels to rotate at the same speed. Additional Rear-Wheel Drive High Range —...
Page 499 STARTING AND OPERATING 497 vehicle in motion, the transfer case will engage/ • Shifting into or out of 4L is possible with the vehicle disengage faster if you momentarily release the accelera- completely stopped, however difficulty may occur due tor pedal after completing the shift. Apply a constant to the mating clutch teeth not being properly aligned.
Page 500: Electronically Shifted Transfer Case (Four-Position Switch) - If Equipped
498 STARTING AND OPERATING This electronically shifted transfer case provides four Electronically Shifted Transfer Case mode positions: (Four-Position Switch) — If Equipped This is an electronic shift transfer case and is operated by • Two-wheel drive high range (2WD) the 4WD Control Switch (Transfer Case Switch), which is •...
Page 501 STARTING AND OPERATING 499 and 4WD LOW positions are designed for loose, slippery If All Shift Conditions Are Met: road surfaces only. Driving in the 4WD LOCK and 4WD 1. The current position indicator light will turn OFF. LOW positions on dry hard surfaced roads may cause increased tire wear and damage to the driveline compo- 2.
Page 502 500 STARTING AND OPERATING NOTE: Before retrying a selection, make certain that all NOTE: Do not attempt to make a shift while only the the necessary requirements for selecting a new transfer front or rear wheels are spinning, as this can cause case position have been met.
Page 503 STARTING AND OPERATING 501 4WD LOCK WARNING! Four-Wheel Drive Lock Range — This range maximizes You or others could be injured or killed if you leave torque to the front driveshaft, forcing the front and rear the vehicle unattended with the transfer case in the wheels to rotate at the same speed.
Page 504 502 STARTING AND OPERATING Shifting Procedure 2WD To 4WD LOCK Rotate the 4WD control switch to the desired position. NOTE: Shifts between 2WD and 4WD LOCK can be done with • If any of the requirements to select a new transfer case the vehicle stopped or in motion.
Page 505 STARTING AND OPERATING 503 2WD Or 4WD LOCK To 4WD LOW Alternate Procedure NOTE: When shifting into or out of 4WD LOW some 1. Bring the vehicle to a complete stop. gear noise may be heard. This noise is normal and is not 2.
Page 506: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
504 STARTING AND OPERATING • The ignition switch must be in the ON position for a shift to take place and for the position indicator lights to be operable. If the ignition switch is not in the ON position, the shift will not take place and no position indicator lights will be on or flashing.
Page 507 STARTING AND OPERATING 505 • Four-wheel drive low range (4WD LOW) When additional traction is required, the transfer case 4WD LOCK and 4WD LOW positions can be used to • Neutral (NEUTRAL) maximize torque to the front driveshaft, forcing the front This electronically shifted transfer case is designed to be and rear wheels to rotate at the same speed.
Page 508 506 STARTING AND OPERATING Transfer Case Position Indicator Lights 2. The newly selected position indicator light will con- tinue to flash. The Transfer Case Position Indicator Lights (4WD, 4LOW, and 4WD AUTO) are located in the instrument 3. The transfer case will not shift. cluster and indicate the current and desired transfer case NOTE: Before retrying a selection, make certain that all selection.
Page 509 STARTING AND OPERATING 507 Proper operation of four-wheel drive vehicles depends WARNING! on tires of equal size, type and circumference on each wheel. Any difference in tire size can cause damage to the Always engage the parking brake when powering drivetrain.
Page 510 508 STARTING AND OPERATING For additional information on the appropriate use of each 4WD LOW transfer case mode position, see the information below: Four - Wheel Drive Low Range - This range provides low speed four-wheel drive. It maximizes torque to the front driveshaft , forcing the front and rear wheels to rotate at Rear-Wheel Drive High Range - This range is for normal the same speed.
Page 511: Electronically Shifted Transfer Case (Five-Position Switch) - If Equipped
STARTING AND OPERATING 509 Shifting Procedure Electronically Shifted Transfer Case (Five-Position Switch) — If Equipped NOTE: This is an electronic shift transfer case and is operated by • If any of the requirements to select a new transfer case the 4WD Control Switch (Transfer Case Switch), which is position have not been met, the transfer case will not located on the instrument panel.
Page 512 510 STARTING AND OPERATING This electronically shifted transfer case provides five drive will be automatically engaged when the vehicle mode positions: senses a loss of traction. Because the front axle is en- gaged, this mode will result in lower fuel economy than •...
Page 513 STARTING AND OPERATING 511 NOTE: The transfer case NEUTRAL position is selected 3. When the shift is complete, the indicator light for the by depressing the recessed button (with a ballpoint pen selected position will stop flashing and remain ON. or similar object) located in the center of the 4WD Control If One Or More Shift Conditions Are Not Met: Switch.
Page 514 512 STARTING AND OPERATING after engine start up or illuminates during driving, it AUTO or 4WD LOCK positions at a given road speed. means that the four-wheel drive system is not function- Take care not to overspeed the engine and do not exceed ing properly and that service is required.
Page 515 STARTING AND OPERATING 513 4WD LOCK WARNING! (Continued) Four-Wheel Drive Lock Range - This range maximizes disengages both the front and rear drive shafts from torque to the front driveshaft, forcing the front and rear the powertrain and will allow the vehicle to move wheels to rotate at the same speed.
Page 516 514 STARTING AND OPERATING Shifting Procedure 2WD To 4WD AUTO Or 4WD LOCK Press the desired position on the 4WD Control Switch to NOTE: shift the transfer case. Shifts between 2WD and 4WD • If any of the requirements to select a new transfer case AUTO and 4WD LOCK can be done with the vehicle position have not been met, the transfer case will not stopped or in motion.
Page 517 STARTING AND OPERATING 515 Preferred Procedure 4. After the desired position indicator light is ON (not flashing), shift the transmission back into gear. 1. With the engine running, slow the vehicle to 2 to 3 mph (3 to 5 km/h). NOTE: 2.
Page 518: Air Suspension System (1500 Models) - If Equipped
516 STARTING AND OPERATING AIR SUSPENSION SYSTEM (1500 MODELS) — IF EQUIPPED Description The air suspension system provides full time load level- ing capability along with the benefit of being able to adjust vehicle height by the push of a button. Air Suspension Switch 1 —...
Page 519 STARTING AND OPERATING 517 NOTE: The vehicle will automatically enter Aero Mode not be available due to vehicle payload, an EVIC/DID when the vehicle speed remains between 62 mph message will be displayed when this occurs. Refer to (100 km/h) and 66 mph (106 km/h) for greater than 20 “Electronic Vehicle Information Center (EVIC) or Driver seconds or if the vehicle speed exceeds 66 mph (106 km/h).
Page 520 518 STARTING AND OPERATING • If the vehicle is in OFFROAD1 or OFFROAD2 setting, NOTE: Automatic Aero Mode may be disabled through be aware of your surroundings, you may not have the vehicle settings in the Electronic Vehicle Information clearance required for certain areas and vehicle dam- Center (EVIC)/Driver Information Display (DID) when age may occur.
Page 521 STARTING AND OPERATING 519 (24 km/h) and 25 mph (40 km/h) for greater than 60 The system requires that the ignition be in ON/RUN seconds, or the vehicle speed exceeds 25 mph position or the engine running for all user requested (40 km/h) the Entry/Exit change will be cancelled.
Page 522: Air Suspension Modes
520 STARTING AND OPERATING to be disabled. Refer to “Electronic Vehicle Information Air Suspension Modes Center (EVIC) or Driver Information Display (DID)” in The Air Suspension system has multiple modes to protect “Understanding Your Instrument Panel” for further in- the system in unique situations: formation.
Page 523 STARTING AND OPERATING 521 Transport Mode NOTE: This mode is intended to be enabled with engine running. To assist with flat bed towing, the air suspension system has a feature which will put the vehicle into Entry/Exit Protection Mode height and disable the automatic load leveling system. In order to “protect”...
Page 524: Electronic Vehicle Information Center
522 STARTING AND OPERATING Electronic Vehicle Information Center Operation (EVIC)/Driver Information Display (DID) Display Messages When the appropriate conditions exist, a message will appear in the EVIC/DID display. Refer to “Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID)” in “Understanding Your Instrument Panel”...
Page 525 STARTING AND OPERATING 523 The indicator lamps 3 through 6 will illuminate to show position, engine running, doors closed, speed below the current position of the vehicle. Flashing indicator threshold, etc). The “DOWN” button can be pressed lamps will show a position which the system is working multiple times, each press will lower the requested level to achieve.
Page 526: Air Suspension System (2500/3500 Models) - If Equipped
524 STARTING AND OPERATING • Entry/Exit Mode – Indicator lamp 3 will be illumi- AIR SUSPENSION SYSTEM (2500/3500 MODELS) — nated when the vehicle is in Entry Exit Mode. Entry/ IF EQUIPPED Exit mode can be requested up to 33 mph (53 km/h). Description If vehicle speed is reduced to, and kept below, 15 mph The air suspension system is a rear leveling ride height...
Page 527 STARTING AND OPERATING 525 including towing a trailer. After the “ALT TRAILER HEIGHT” button has been pushed, it will blink continu- ously until the trailer height has been achieved. The system requires that the ignition be in ON/RUN position or the engine running with zero vehicle speed for all user requested changes.
Page 528: Air Suspension Modes
526 STARTING AND OPERATING NOTE: This mode is intended to be enabled with engine WARNING! running. The air suspension system uses a high pressure Transport Mode volume of air to operate the system. To avoid per- To assist with flat bed towing, the air suspension system sonal injury or damage to the system, see your has a feature which will put the vehicle below Normal authorized dealer for service.
Page 529: Electronic Vehicle Information Center (Evic)/Driver Information Display (Did) Display Messages
STARTING AND OPERATING 527 Wheel Alignment Mode Your Instrument Panel” or “Uconnect® Settings” in “Un- derstanding Your Instrument Panel” if equipped with a Before performing a wheel alignment this mode must be touch screen radio for further information. enabled. Refer to “Electronic Vehicle Information Center (EVIC) or Driver Information Display (DID)”...
Page 530: Operation
528 STARTING AND OPERATING • Wheel Alignment Mode – No indicator lamps will be Operation illuminated. Wheel Alignment Mode is disabled by Pushing the Trailer Mode button once, while at Normal driving the vehicle. Ride Height (NRH) will lower the vehicle to trailer level. NOTE: The LED will continuously blink until vehicle AXLE LOCKER SYSTEM —...
Page 531 STARTING AND OPERATING 529 position, the rear axle is locked. In the FRONT/REAR CAUTION! LOCK position, the front and rear axles are locked. • Do not lock the front or rear axle on hard surfaced NOTE: Even when the axles are in the AXLE UNLOCK roads.
Page 532 530 STARTING AND OPERATING NOTE: Left to right wheel speed difference may be NOTE: The rear axle must be locked before the front axle necessary to allow the axle to fully lock. If the indicator will lock. light is flashing after placing the switch in the REAR To unlock the front axle;...
Page 533: Stabilizer/Sway Bar System - Power Wagon Only
STARTING AND OPERATING 531 STABILIZER/SWAY BAR SYSTEM — POWER WAGON ONLY Your vehicle is equipped with an electronic disconnecting stabilizer/sway bar. This system allows greater front suspension travel in off-road situations. Due to the use of taller springs, this vehicle has an increased ride height of approximately 1.9 in (48.3 mm) in the front and 1.5 in (38.1 mm) in the rear.
Page 534 532 STARTING AND OPERATING to obtain the Off-Road position. The amber indicator WARNING! light will flash until the stabilizer/sway bar has been fully disconnected. Do not disconnect the stabilizer bar and drive on hard surfaced roads or at speeds above 18 mph NOTE: The stabilizer/sway bar may be torque locked due (29 km/h), you may lose control of the vehicle, which to left and right suspension height differences.
Page 535: Safe Off-Road Driving - Power Wagon Only
STARTING AND OPERATING 533 recreational areas. The National Forest Service, Bureau of WARNING! (Continued) Land Management or local Department of Natural Re- attempt to drive the vehicle over 18 mph (29 km/h). sources are a wealth of information and usually have Driving faster than 18 mph (29 km/h) may cause loss maps with marked trails.
Page 536 534 STARTING AND OPERATING has an RTI of 510, which means you can articulate one Simultaneous Brake And Throttle Operation front wheel 26 inches in the air while the other three Many off-road driving conditions require the simultane- wheels remain in contact with the ground. ous use of the brake and throttle (two footed driving).
Page 537: Driving In Snow, Mud And Sand
STARTING AND OPERATING 535 accelerations, turns or braking. In most cases there are no When To Use Low Range road signs, posted speed limits or signal lights. Therefore When driving off-road, shift into 4L (Low Range) for you will need to use your own good judgment on what is additional traction or to improve handling and control on safe and what isn’t.
Page 538 536 STARTING AND OPERATING • Snow – In heavy snow or for additional control and enough to maintain your momentum without shifting. traction at slower speeds, shift the transmission to a If you start to slow to a stop, try turning your steering low gear and shift the transfer case to 4L (Low Range) wheel no more than a ¼...
Page 539: Crossing Obstacles (Rocks And Other High Points)
STARTING AND OPERATING 537 surface area. Reduced tire pressure will drastically Crossing Obstacles (Rocks And Other High improve your traction and handling, while driving on Points) the soft sand, but you must return the tires to normal While driving off road, you will encounter many types of air pressure before driving on pavement or other hard terrain.
Page 540 538 STARTING AND OPERATING Using A Spotter CAUTION! There are many times where it is hard to see the obstacle • Never attempt to straddle a rock that is large or determine the correct path. Determining the correct enough to strike your axles or undercarriage. path can be extremely difficult when you are confronting •...
Page 541 STARTING AND OPERATING 539 You should now be able to drive out following the trench CAUTION! you just created at a 45-degree angle. Do not attempt to cross a log with a greater diameter WARNING! than the running ground clearance or the vehicle will become high centered.
Page 542: Hill Climbing
540 STARTING AND OPERATING the vehicle if something goes wrong? If everything CAUTION! looks good and you feel confident, then change trans- mission into a lower gear, shift the transfer case into 4L Winching or rocking the vehicle off hard objects (Low) and proceed with caution.
Page 543 STARTING AND OPERATING 541 fresh bite into the surface and will usually provide ability to proceed then make sure you are in 4L (Low enough traction to complete the climb. If you do not Range) with the transmission in first gear (manually make it to the top, place the vehicle in REVERSE and select first gear on automatic transmissions) and pro- back straight down the grade using engine resistance...
Page 544: Driving Through Water
542 STARTING AND OPERATING soils. If possible transverse the incline at an angle WARNING! heading slightly up or down. If the engine stalls or you lose headway or cannot WARNING! make it to the top of a steep hill or grade, never attempt to turn around.
Page 545 STARTING AND OPERATING 543 something goes wrong. You should never stop or shut a CAUTION! (Continued) vehicle off when crossing deep water unless you ingested permanent damage to engine, driveline or other water into the engine air intake. If the engine stalls do not vehicle components and your brakes will be less attempt to restart it.
Page 546 544 STARTING AND OPERATING • Crossing Puddles, Pools, Flooded Areas Or Other stream or river even in shallow water. Fast moving Standing Water – Puddles, pools, flooded or other water can easily push your vehicle downstream standing water areas normally contain murky or sweeping it out of control.
Page 547: Airing Down For Off-Road Driving
STARTING AND OPERATING 545 replace it so, start high and lower it as required. Remem- WARNING! ber you must return the tires to normal air pressure before driving on road or at highway conditions. Be sure Never drive through fast moving deep water. It can you have a way to return the tires to their normal on road push your vehicle downstream, sweeping it out of air pressure.
Page 548 546 STARTING AND OPERATING off-road driving without the ability to recover your severely hung up on something you should jack the vehicle from a situation. Having another vehicle with vehicle up and stack something under the wheels to you usually works best for most situations. The first allow the vehicle to roll off the object without causing thing to do is assess the situation.
Page 549 STARTING AND OPERATING 547 this process to clean the debris from the tread and designed to take the abusive force generated during improve the traction. You want to create a rocking vehicle recovery. Do not use the bumper or any other motion with the vehicle.
Page 550 548 STARTING AND OPERATING vehicle becomes free, the driver of the previously stuck • Winching (Refer To “Winch Operation” For Addi- vehicle should signal they are free and should hit their tional Information) – Winching is most commonly brakes stopping both vehicles. The driver of the pull- used in the following situations: there is no support ing vehicle should let off the throttle without using the vehicle available, a high controlled force is required to...
Page 551: After Driving Off-Road
STARTING AND OPERATING 549 within reach try using your spare tire by burying it. WARNING! (Continued) Once you have determined an anchor point hook up the or straddle the winch cable. Never jerk or overload cable, ensuring there are a least five wraps of cable left the winch cable.
Page 552 550 STARTING AND OPERATING • Inspect the radiator for mud and debris and clean as WARNING! required. Abrasive material in any part of the brakes may cause • Check threaded fasteners for looseness, particularly on excessive wear or unpredictable braking. You might the chassis, drivetrain components, steering, and sus- not have full braking power when you need it to pension.
Page 553: Limited-Slip Differential
STARTING AND OPERATING 551 LIMITED-SLIP DIFFERENTIAL WARNING! The limited-slip differential provides additional traction On vehicles equipped with a limited-slip differential on snow, ice, mud, sand and gravel, particularly when never run the engine with one rear wheel off the there is a difference between the traction characteristics ground since the vehicle may drive through the rear of the surface under the right and left rear wheels.
Page 554: Traction
552 STARTING AND OPERATING when there is a difference in the surface traction under • Slow down during rainstorms or when the roads are the rear (driving) wheels. slushy. • Slow down if the road has standing water or puddles. WARNING! •...
Page 555: Driving Through Water
STARTING AND OPERATING 553 DRIVING THROUGH WATER Shallow Standing Water Driving through water more than a few inches/ Although your vehicle is capable of driving through centimeters deep will require extra caution to ensure shallow standing water, consider the following Cautions safety and prevent damage to your vehicle.
Page 556 554 STARTING AND OPERATING CAUTION! CAUTION! (Continued) • Driving through standing water may cause damage • Always check the depth of the standing water to your vehicle’s drivetrain components. Always before driving through it. Never drive through inspect your vehicle’s fluids (i.e., engine oil, trans- standing water that is deeper than the bottom of mission, axle, etc.) for signs of contamination (i.e., the tire rims mounted on the vehicle.
Page 557: Off-Road Driving Tips
STARTING AND OPERATING 555 always a good idea to check for damage. That way you OFF-ROAD DRIVING TIPS can get any problems taken care of right away and have Care should be taken when attempting to climb steep your vehicle ready when you need it. hills or driving diagonally across a hill or slope.
Page 558: Winch Usage - Power Wagon Only - (If Equipped)
556 STARTING AND OPERATING • After extended operation in mud, sand, water, or WINCH USAGE — POWER WAGON ONLY — (IF similar dirty conditions, have the radiator, fan, brake EQUIPPED) rotors, wheels, brake linings, and axle yokes inspected Things To Know Before Using Your Winch and cleaned as soon as possible.
Page 559 STARTING AND OPERATING 557 2. Attach the hook to a suitable anchor point. Low Voltage Interrupt Your winch is equipped with a device that will interrupt CAUTION! winch function if the vehicle charging system voltage drops to a low level. The winch will not power-in or out Be certain the anchor will withstand the load re- for 30 seconds if this device is tripped.
Page 560: Understanding The Features Of Your Winch
558 STARTING AND OPERATING Understanding The Features Of Your Winch Winch Components...
Page 561 STARTING AND OPERATING 559 1. Motor: The winch motor is powered by the vehicle 6. Clutch Lever: The clutch lever allows the winch drum charging system and features a thermal protection to be disconnected from the winch motor to allow the switch that automatically stops motor function in the wire rope to be pulled from the winch by hand.
Page 562: Winch Accessories
560 STARTING AND OPERATING Snatch/Block Pulley: Used Winch Accessories properly, the multi-purpose The following accessories are necessary to attach the snatch block allows you to (1) winch to anchors, change direction of pull, and for safe increase the winch’s pulling winching.
Page 563: Operating Your Winch
STARTING AND OPERATING 561 Tree Trunk Protector: Typi- WARNING! (Continued) cally made of tough, high- • Never use as a hoist. quality nylon, it provides the • Never use to move persons. operator an attachment point • Never exceed winch or wire rope rated capacity. for the winch rope to a wide •...
Page 564 562 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • Never wrap wire rope back onto itself. Always use • Always pass remote control through a window to a choker chain, wire choker rope or tree trunk avoid pinching lead in door, when using remote protector on the anchor.
Page 565 STARTING AND OPERATING 563 • Always wear leather gloves and do not allow the wire CAUTION! (Continued) rope to slip through your hands when handling the • Always inspect winch installation and wire rope rope. condition before operating the winch. Frayed, •...
Page 566 564 STARTING AND OPERATING 1. Inspect the winch, winch mount, and wire rope for 2. Put on gloves. damage. Do not use the winch if the mount is loose or 3. Disengage the clutch to allow free spooling of the rope shows excessive wear or damage.
Page 567 STARTING AND OPERATING 565 4. Free the winch hook and attach the hook strap. Free 5. Pull the wire to the anchor point. Pull out enough wire the winch hook from its anchor point. Attach the hook rope to reach your anchor point. Be sure to keep a strap to the hook (if not attached).
Page 568 566 STARTING AND OPERATING 6. Secure to the anchor point. Once you have established CAUTION! your anchor point, secure the tree-trunk protector or choker-chain around the object. Always be certain the anchor you select will with- stand the load. NOTE: How to choose an anchor point: A secure anchor is critical to winching operations.
Page 569 STARTING AND OPERATING 567 7. Attach the Clevis/D-shackle and Tree Trunk Protector. NOTE: Always ensure the clutch is fully engaged or Attach the shackle to the two ends of the strap or chain disengaged. and through the hook loop, being careful not to over 9.
Page 570 568 STARTING AND OPERATING Winch Box Remote Control Connector Pulling Wire Rope Under Tension 10. Put wire rope under tension. Using the remote con- 11. Check your anchor. Make sure all connections are trol switch, slowly wind the wire rope until no slack secured and free of debris before continuing with the remains.
Page 571 STARTING AND OPERATING 569 tension is applied. Do not al- low it to get pulled into the fairlead. If it is necessary to move or remove the blanket, slack the tension on the wire rope first. 13. Establish no people zones: Make your intentions Wire Neatly Wound Around The Spooling Drum clear.
Page 572 570 STARTING AND OPERATING the winch. Continue pulling until the vehicle is on stable ground. If you are able to drive the vehicle, the winching operation is complete. No People Zones 14. Begin winching. With the winching vehicles engine on and light tension already on the wire rope, begin winching slowly and steadily.
Page 573 STARTING AND OPERATING 571 NOTE: an uneven stack, spool out that section of the rope and reposition it to the opposite end of the drum, • Avoid overheating the winch motor. For extended which will free up space for continued winching. winching, stop at reasonable intervals to allow the winch motor to cool down.
Page 574 572 STARTING AND OPERATING NOTE: How to spool under no load: Arrange the re- mote control lead so it cannot be caught in the winch. Arrange the wire rope so it will not kink or tangle when spooled. Be sure any wire rope already on the spooling drum is wound tightly and evenly layered.
Page 575: Rigging Techniques
STARTING AND OPERATING 573 NOTE: Always store the remote control in a protected, clean, dry area. Rigging Techniques Various winching situations will require application of other winching techniques. These could range from too little distance to achieve maximum pull using straight line rigging, simply increasing pulling power, or main- taining a straight-line pulling situation.
Page 576 574 STARTING AND OPERATING How To Change The Pulling Direction block, secured to a point directly in front of the vehicle will enable you to change your pulling direction while still allowing the wire rope to be at 90° to wind properly onto the spooling drum.
Page 577: Power Steering - 1500 Models
STARTING AND OPERATING 575 Double Line and increases pulling power. Start by feeding out enough wire rope to free the winch hook. Attach the hook to your vehicle’s frame/tow hook and run the wire rope through a snatch block. Disengage the clutch and, using the snatch block, pull out enough wire to reach your anchor point.
Page 578: Power Steering - 2500/3500 Models
576 STARTING AND OPERATING If the Steering icon is flashing, it indicates that the vehicle Vehicle Information Center (EVIC) or Driver Information needs to be taken to the dealer for service. It is likely the Display (DID)” in “Understanding Your Instrument vehicle has lost power steering assistance.
Page 579 STARTING AND OPERATING 577 If for some reason the power assist is interrupted, it will CAUTION! still be possible to steer your vehicle. Under these condi- tions, you will observe a substantial increase in steering Prolonged operation of the steering system at the end effort, especially at very low vehicle speeds and during of the steering wheel travel will increase the steering parking maneuvers.
Page 580: Fuel Saver Technology 5.7L/6.4L Engines
578 STARTING AND OPERATING FUEL SAVER TECHNOLOGY 5.7L/6.4L ENGINES CAUTION! ONLY — IF EQUIPPED Do not use chemical flushes in your power steering This feature offers improved fuel economy by shutting system as the chemicals can damage your power off four of the engine’s eight cylinders during light load steering components.
Page 581 STARTING AND OPERATING 579 NOTE: • When the parking brake is applied and the transmis- sion is placed in gear, the “Brake Warning Light” will flash. If vehicle speed is detected, a chime will sound to alert the driver. Fully release the parking brake before attempting to move the vehicle.
Page 582 580 STARTING AND OPERATING WARNING! WARNING! (Continued) • Be sure the parking brake is fully disengaged • Never use the PARK position as a substitute for the before driving; failure to do so can lead to brake parking brake. Always apply the parking brake failure and a collision.
Page 583: Brake System
STARTING AND OPERATING 581 NOTE: Under cold temperatures, pedal effort will be BRAKE SYSTEM higher than normal until the power steering fluid reaches If power assist is lost for any reason (for example, operating temperature. repeated brake applications with the engine off), the brakes will still function.
Page 584 582 STARTING AND OPERATING with a separate computer to modulate hydraulic pressure Engagement of the ABS may be accompanied by a to prevent wheel lockup and help avoid skidding on pulsing sensation. You may also hear a clicking noise. slippery surfaces. These occurrences are normal, and indicate that the system is functioning.
Page 585: Traction Control System (Tcs)
STARTING AND OPERATING 583 stability. A feature of the TCS functions similarly to a WARNING! (Continued) limited-slip differential and controls the wheel spin • The ABS cannot prevent collisions, including those across a driven axle. If one wheel on a driven axle is resulting from excessive speed in turns, following spinning faster than the other, the system will apply the another vehicle too closely, or hydroplaning.
Page 586: Hill Start Assist (Hsa)
584 STARTING AND OPERATING applies optimum pressure to the brakes in emergency WARNING! (Continued) braking conditions. This can help reduce braking dis- • The BAS cannot prevent collisions, including those tances. The BAS complements the ABS. Applying the resulting from excessive speed in turns, following brakes very quickly results in the best BAS assistance.
Page 587 STARTING AND OPERATING 585 During operation, HSA will activate the brake control WARNING! system and a clicking noise may occur. If your foot is on the brake pedal during operation you may feel a slight There may be situations on minor hills with a loaded pedal movement.
Page 588 586 STARTING AND OPERATING Towing And Hauling With HSA WARNING! The HSA system does not know if your vehicle is loaded • If you use a trailer brake controller with your or towing a trailer unless the TOW/HAUL switch, lo- trailer, your trailer brakes may be activated and cated on the center stack, is selected.
Page 589: Electronic Stability Control (Esc)
STARTING AND OPERATING 587 Electronic Stability Control (ESC) WARNING! (Continued) The ESC system enhances directional control and stabil- • HSA is not a parking brake. If you stop the vehicle ity of the vehicle under various driving conditions. ESC on a hill without putting the transmission in PARK corrects for oversteering or understeering of the vehicle or using the parking brake, it will roll down the by applying the brake of the appropriate wheel to assist...
Page 590 588 STARTING AND OPERATING All Two-Wheel Drive Vehicles And Four-Wheel WARNING! Drive Vehicles In 2WD, 4WD AUTO, Or 4WD LOCK Modes Can Choose The Following ESC Electronic Stability Control (ESC) cannot prevent the Operating Modes: natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing ESC On road conditions.
Page 591 STARTING AND OPERATING 589 portion of ESC, except for the “limited slip” feature WARNING! described in the TCS section, has been disabled and the ESC Off Indicator Light will be illuminated. All other • When in “ESC Partial Off” mode, the TCS func- stability features of ESC function normally.
Page 592 590 STARTING AND OPERATING All Four-Wheel Drive Vehicles In 4WD AUTO And In this mode, ESC and TCS except for the “limited slip” 4WD LOCK Modes Can Also Choose The feature described in the TCS section are turned off until Following ESC Operating Mode.
Page 593: Esc Activation/Malfunction Indicator Light And Esc Off Indicator Light
STARTING AND OPERATING 591 malfunction has been detected in the ESC system. If this WARNING! light remains on after several ignition cycles, and the vehicle has been driven several miles (kilometers) at In the ESC Full Off mode, the engine torque reduc- speeds greater than 30 mph (48 km/h), see your autho- tion and stability features are disabled.
Page 594: Trailer Sway Control (Tsc)
592 STARTING AND OPERATING NOTE: Trailer Sway Control (TSC) The TSC system uses sensors in the vehicle to recognize • The “ESC Activation/Malfunction Indicator Light” an excessively swaying trailer and will take the appro- and the “ESC OFF Indicator Light” come on momen- priate actions to attempt to stop the sway.
Page 595: Hill Descent Control (Hdc) - If Equipped
STARTING AND OPERATING 593 TSC is only active in the default “ESC On” mode. TSC HDC has three states: can be disabled by pressing the “ESC Off” switch and 1. Off (feature is not enabled and will not activate). entering “ESC Partial Off” mode. It is not active in the “ESC Partial Off”...
Page 596 594 STARTING AND OPERATING Activating HDC Gear Approximate HDC Set Speed Once HDC is enabled it will activate automatically if 1.8 mph (3 km/h) driven down a grade of sufficient magnitude (greater 2.5 mph (4 km/h) than approximately 8%). The set speed for HDC is 3.1 mph (5 km/h) selectable by the driver, and can be adjusted by using the 3.7 mph (6 km/h)
Page 597 STARTING AND OPERATING 595 Driver Override: Disabling HDC The driver may override HDC activation with throttle or HDC will deactivate and be disabled if any of the brake application at anytime. following conditions occur: Deactivating HDC • The driver presses the HDC switch. HDC will be deactivated but remain available if any of •...
Page 598 596 STARTING AND OPERATING Feedback to the driver: • The cluster icon and switch lamp will flash for several seconds then extinguish when HDC deactivates due to The instrument cluster has a HDC icon and a HDC excess speed. switch which has an LED which offers feedback to the driver about the state HDC is in.
Page 599: Tire Safety Information
STARTING AND OPERATING 597 NOTE: TIRE SAFETY INFORMATION • P (Passenger) — Metric tire sizing is based on U.S. Tire Markings design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. •...
Page 600 598 STARTING AND OPERATING • Temporary spare tires are designed for temporary • High flotation tire sizing is based on U.S. design emergency use only. Temporary high pressure com- standards and it begins with the tire diameter molded pact spare tires have the letter “T” or “S” molded into into the sidewall.
Page 601 STARTING AND OPERATING 599 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 602: Tire Identification Number (Tin)
600 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 603 STARTING AND OPERATING 601 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 604: Tire Terminology And Definitions
602 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold Tire Inflation Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 605: Tire Loading And Tire Pressure
STARTING AND OPERATING 603 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (Door)
Page 606 604 STARTING AND OPERATING Tire And Loading Information Placard Example Tire Placard Location (B-Pillar) Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry.
Page 607 STARTING AND OPERATING 605 3. Tire size designed for your vehicle. To determine the maximum loading conditions of your vehicle, locate the statement “The combined weight of 4. Cold tire inflation pressures for the front, rear, and occupants and cargo should never exceed XXX lbs or spare tires.
Page 608 606 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 609 STARTING AND OPERATING 607...
Page 610: Tires - General Information
608 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 611 STARTING AND OPERATING 609 Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 612: Tire Inflation Pressures
610 STARTING AND OPERATING Inflation pressures specified on the placard are always Tire Inflation Pressures “cold tire inflation pressure.” Cold tire inflation pressure The proper cold tire inflation pressure is listed on the is defined as the tire pressure after the vehicle has not driver’s side B-Pillar or rear edge of the driver’s side been driven for at least three hours, or driven less than door.
Page 613: Tire Pressures For High Speed Operation
STARTING AND OPERATING 611 inflation pressure should be increased by 3 psi (21 kPa), WARNING! which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) tires could cause them to fail.
Page 614: Tire Types
612 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (spring, • The tire has not been driven on when flat. summer, fall and winter).
Page 615 STARTING AND OPERATING 613 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires summer tires only in sets of four; failure to do so may during the winter.
Page 616: Run Flat Tires - If Equipped
614 STARTING AND OPERATING While studded tires improve performance on ice, skid See the tire pressure monitoring section for more infor- and traction capability on wet or dry surfaces may be mation. poorer than that of non-studded tires. Some states pro- Spare Tires —...
Page 617 STARTING AND OPERATING 615 Spare Tire Matching Original Equipped Tire And Since this tire has limited tread life, the original equip- Wheel — If Equipped ment tire should be repaired (or replaced) and reinstalled on your vehicle at the first opportunity. Your vehicle may be equipped with a spare tire and wheel equivalent in look and function to the original equipment Do not install a wheel cover or attempt to mount a...
Page 618 616 STARTING AND OPERATING Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
Page 619: Tire Spinning
STARTING AND OPERATING 617 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires spin your vehicle’s wheels above 30 mph (48 km/h) or to help you in determining when your tires should be for longer than 30 seconds continuously without stop- replaced.
Page 620: Life Of Tire
618 STARTING AND OPERATING These indicators are molded into the bottom of the tread • Distance driven. grooves. They will appear as bands when the tread depth • Performance tires, tires with a speed rating of V or becomes a 1/16 of an inch (2 mm). When the tread is higher, and summer tires typically have a reduced worn to the tread wear indicators, the tire should be tread life.
Page 621: Replacement Tires
STARTING AND OPERATING 619 It is recommended to replace the two front tires or two Replacement Tires rear tires as a pair. Replacing just one tire can seriously The tires on your new vehicle provide a balance of many affect your vehicle’s handling. If you ever replace a characteristics.
Page 622: Supplemental Tire Pressure Information - If Equipped
620 STARTING AND OPERATING WARNING! WARNING! (Continued) • Failure to equip your vehicle with tires having • Do not use a tire, wheel size or rating other than adequate speed capability can result in sudden tire that specified for your vehicle. Some combinations failure and loss of vehicle control.
Page 623: Tire Chains (Traction Devices)
STARTING AND OPERATING 621 Please follow the table below for proper tire size, chain TIRE CHAINS (TRACTION DEVICES) type, and axle recommendations: Use of traction devices require sufficient tire-to-body clearance. Follow these recommendations to guard against damage. • Traction device must be of proper size for the tire, as recommended by the traction device manufacturer.
Page 624 622 STARTING AND OPERATING WARNING! CAUTION! (Continued) • Install device as tightly as possible and then re- Using tires of different size and type (M+S, Snow) tighten after driving about ½ mile (0.8 km). between front and rear axles can cause unpredictable •...
Page 625: Tire Rotation Recommendations
STARTING AND OPERATING 623 The suggested rotation method is the “forward cross” TIRE ROTATION RECOMMENDATIONS shown in the following diagram. This rotation pattern Tires on the front and rear axles of vehicles operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
Page 626: Directional Tires - If Equipped
624 STARTING AND OPERATING Directional Tires — If Equipped Dual Rear Wheels — If Equipped For the R/T package with 22” tires and wheels, the The tires used on dual wheel assemblies should be rotational direction of the tire must be taken into consid- matched for wear to prevent overloading one tire in a set.
Page 627 STARTING AND OPERATING 625 NOTE: If your vehicle is equipped with a Tire Pressure • If the tires are rotated incorrectly, The Auto localization Information System (TPIS): of the TPIS sensors will fail to locate correctly resulting in incorrect locations for the pressure values displayed •...
Page 628: Tire Pressure Monitor System (Tpms)
626 STARTING AND OPERATING the outside temperature decreases, the tire pressure will CAUTION! (Continued) decrease. Tire pressure should always be set based on • When replacing a flat, the spare tire may have to be cold inflation tire pressure. This is defined as the tire remounted on the rim, or installed at a different pressure after the vehicle has not been driven for at least location, to maintain the correct placement of the...
Page 629 STARTING AND OPERATING 627 The TPMS will continue to warn the driver of low tire For example, your vehicle may have a recommended pressure as long as the condition exists, and will not turn cold (parked for more than three hours) placard pressure off until the tire pressure is at or above the recommended of 30 psi (207 kPa).
Page 630 628 STARTING AND OPERATING NOTE: CAUTION! • The TPMS is not intended to replace normal tire care • The TPMS has been optimized for the original and maintenance or to provide warning of a tire failure equipment tires and wheels. TPMS pressures and or condition.
Page 631: Premium System
STARTING AND OPERATING 629 • Seasonal temperature changes will affect tire pressure, • Various TPMS messages, which display in the Elec- and the TPMS will monitor the actual tire pressure in tronic Vehicle Information Center (EVIC)/Driver In- the tire. formation Display (DID) •...
Page 632 630 STARTING AND OPERATING the pressure values of each tire with the low tire pressure vehicle’s recommended cold placard pressure inflation values in a different color. An Inflate to XX message will value as shown in the Inflate to XX message. Once the also be displayed.
Page 633 STARTING AND OPERATING 631 SYSTEM message will no longer display, and a pressure value will display in place of the dashes. A system fault can occur due to any of the following: 1. Signal interference due to electronic devices or driving next to facilities emitting the same radio frequencies as the TPM sensors.
Page 634: Tire Pressure Information System (Tpis) 3500
632 STARTING AND OPERATING Vehicles With Full Size Spare Tire Pressure Information System (TPIS) 3500 Series Trucks 1. The matching full size spare wheel and tire assembly Your vehicle may be equipped with a Tire Pressure has a TPM sensor that can be monitored by the TPMS. Information System (TPIS).
Page 635 STARTING AND OPERATING 633 • Six TPM sensors (Dual Rear Wheel (DRW) applica- will no longer be displayed, and a pressure value will tions) display in place of the dashes. A system fault can occur due to any of the following: •...
Page 636: General Information
634 STARTING AND OPERATING General Information FUEL REQUIREMENTS This device complies with Part 15 of the FCC rules and 3.6L Engine RSS 210 of Industry Canada. Operation is subject to the following conditions: These engines are designed to meet all •...
Page 637: 5.7L/6.4L Engines
STARTING AND OPERATING 635 Over 40 auto manufacturer’s world wide have issued and 5.7L/6.4L Engines endorsed consistent gasoline specifications (the World- wide Fuel Charter, WWFC) which define fuel properties This engine is designed to meet all emis- necessary to deliver enhanced emissions, performance, sions regulations and provide satisfactory and durability for your vehicle.
Page 638: Gasoline/Oxygenate Blends
636 STARTING AND OPERATING Gasoline/Oxygenate Blends E-85 Usage In Non-Flex Fuel Vehicles Some fuel suppliers blend unleaded gasoline with oxy- Non-Flex Fuel Vehicles (FFV) are compatible with gaso- genates such as Ethanol. line containing 10% ethanol (E10). Gasoline with higher ethanol content may void the New Vehicle Limited CAUTION! Warranty.
Page 639: Mmt In Gasoline
STARTING AND OPERATING 637 • Change the engine oil and oil filter. Materials Added To Fuel • Disconnect and reconnect the battery to reset the All gasoline sold in the United States is required to engine controller memory. contain effective detergent additives. Use of additional detergents or other additives is not needed under normal More extensive repairs will be required for prolonged conditions and they would result in additional cost.
Page 640: Carbon Monoxide Warnings
638 STARTING AND OPERATING Carbon Monoxide Warnings CAUTION! (Continued) • An out-of-tune engine or certain fuel or ignition WARNING! malfunctions can cause the catalytic converter to Carbon monoxide (CO) in exhaust gases is deadly. overheat. If you notice a pungent burning odor or Follow the precautions below to prevent carbon some light smoke, your engine may be out of tune monoxide poisoning:...
Page 641: Flexible Fuel (3.6L Engine Only) - If Equipped
STARTING AND OPERATING 639 WARNING! (Continued) • Guard against carbon monoxide with proper main- tenance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions repaired promptly. Until repaired, drive with all side windows fully open. FLEXIBLE FUEL (3.6L ENGINE ONLY) —...
Page 642: Ethanol Fuel (E-85)
640 STARTING AND OPERATING Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. WARNING! Ethanol vapors are extremely flammable and could cause serious personal injury. Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
Page 643: Fuel Requirements
STARTING AND OPERATING 641 NOTE: Fuel Requirements Your vehicle will operate on both unleaded gasoline with • When the ambient temperature is above 90° F (32° C), an octane rating of 87, or E-85 fuel, or any mixture of you may experience hard starting and rough idle these two.
Page 644: Starting
642 STARTING AND OPERATING recommends engine oils that are API Certified and meet Cruising Range the requirements of Material Standard MS-6395. MS-6395 Because E-85 fuel contains less energy per gallon/liter contains additional requirements, developed during ex- than gasoline, you will experience an increase in fuel tensive fleet testing, to provide additional protection to consumption.
Page 645: Maintenance
STARTING AND OPERATING 643 Maintenance CAUTION! Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. ADDING FUEL The fuel filler cap (gas cap) is located behind the fuel filler door, on the left side of the vehicle.
Page 646 644 STARTING AND OPERATING CAUTION! WARNING! (Continued) • Never add fuel to the vehicle when the engine is • Damage to the fuel system or emissions control running. system could result from using an improper fuel • A fire may result if gasoline is pumped into a tank filler tube cap.
Page 647: Loose Fuel Filler Cap Message
STARTING AND OPERATING 645 Loose Fuel Filler Cap Message WARNING! Static electricity can cause an ignition of flammable If the vehicle diagnostic system determines liquid, vapor or gas in any vehicle or trailer. To that the fuel filler cap is loose, improperly reduce risk of serious injury or death when filling installed, or damaged, a loose gascap indicator containers:...
Page 648: Vehicle Loading
646 STARTING AND OPERATING rear axle systems (GAWR). Total load must be limited so VEHICLE LOADING GVWR and front and rear GAWR are not exceeded. Certification Label Payload As required by National Highway Traffic Safety Admin- istration regulations, your vehicle has a certification label The payload of a vehicle is defined as the allowable load affixed to the driver’s side door or pillar.
Page 649 STARTING AND OPERATING 647 Tire Size values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are The tire size on the Vehicle Certification Label represents added. the actual tire size on your vehicle. Replacement tires must be equal to the load capacity of this tire size.
Page 650: Trailer Towing
648 STARTING AND OPERATING items down low and be sure that the weight is distributed TRAILER TOWING equally. Stow all loose items securely before driving. In this section you will find safety tips and information on limits to the type of towing you can reasonably do Improper weight distributions can have an adverse effect with your vehicle.
Page 651 STARTING AND OPERATING 649 exceed the GVWR. Refer to “Vehicle Loading/Vehicle evenly. Make sure that you do not exceed either front or Certification Label” in “Starting and Operating” for rear GAWR. Refer to “Vehicle Loading/Vehicle Certifica- further information. tion Label” in “Starting and Operating” for further information.
Page 652 650 STARTING AND OPERATING Frontal Area the most popular on the market today and they are com- monly used to tow small and medium sized trailers. The frontal area is the maximum height multiplied by the maximum width of the front of a trailer. Weight-Distributing Hitch Trailer Sway Control A weight-distributing system works by applying lever-...
Page 653 STARTING AND OPERATING 651 WARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability and braking performance and could result in a collision. • Weight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable Rec- reational Vehicle dealer for additional information.
Page 654 652 STARTING AND OPERATING With Weight-Distributing Hitch (Correct) Improper Adjustment Of Weight-Distributing Hitch (Incorrect)
Page 655 STARTING AND OPERATING 653 Recommended Distribution Hitch Adjustment Towing With 1500 Air Suspension 1. Set air suspension to normal ride height. No action is required if already in normal ride height. NOTE: The vehicle must remain in the engine running position while attaching a trailer for proper leveling of the air suspension system.
Page 656 (do not connect the trailer). tween H2 and H1 above normal ride height [H1]). NOTE: For Ram 2500/3500 trucks equipped with rear air 8. The truck can now be driven. Jack mode will be suspension, normal ride height or alternate ride height canceled and vehicle will return to normal ride height can be used.
Page 657 STARTING AND OPERATING 655 5. Attach the trailer to the vehicle without the weight NOTE: For all towing conditions, we recommend towing distribution bars connected. with tow haul mode engaged. 6. Measure the height of the top of the front wheel Fifth-Wheel Hitch opening on the fender to ground, this is height H2.
Page 658: Trailer Hitch Type And Maximum Trailer Weight
656 STARTING AND OPERATING Trailer Hitch Type and Maximum Trailer Weight Trailer Hitch Type and Maximum Trailer Weight The following chart provides the maximum trailer Gooseneck - 2500 20,000 lbs (9 071 kg) weight a given factory equipped trailer hitch type can Model tow and should be used to assist you in selecting the Gooseneck - 3500...
Page 659: Trailer Towing Weights (Maximum Trailer Weight Ratings)
STARTING AND OPERATING 657 Trailer Towing Weights (Maximum Trailer Weight Ratings) NOTE: For additional trailer towing information (maxi- mum trailer weight ratings) refer to the following website addresses: • ramtrucks.com/en/towing_guide/ • ramtruck.ca (Canada) • rambodybuilder.com Trailer And Tongue Weight Always load a trailer with 60% of the weight in the front Consider the following items when computing the of the trailer.
Page 660: Towing Requirements
658 STARTING AND OPERATING NOTE: Remember that everything put into or on the CAUTION! (Continued) trailer adds to the load on your vehicle. Also, additional • Then, during the first 500 miles (805 km) that a factory-installed options or dealer-installed options must trailer is towed, do not drive over 50 mph (80 km/h) be considered as part of the total load on your vehicle.
Page 661 STARTING AND OPERATING 659 WARNING! (Continued) WARNING! (Continued) • When hauling cargo or towing a trailer, do not • GCWR must not be exceeded. overload your vehicle or trailer. Overloading can • Total weight must be distributed between the tow cause a loss of control, poor performance or dam- vehicle and the trailer such that the following four age to brakes, axle, engine, transmission, steering,...
Page 662 660 STARTING AND OPERATING Towing Requirements — Tires Towing Requirements — Trailer Brakes • Do not attempt to tow a trailer while using a compact WARNING! spare tire. • Do not connect trailer brakes to your vehicle’s • Proper tire inflation pressures are essential to the safe hydraulic brake lines.
Page 663 STARTING AND OPERATING 661 • Trailer brakes are recommended for trailers over CAUTION! 1,000 lbs (454 kg) and required for trailers in excess of 1,653 lbs (750 kg). If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they Integrated Trailer Brake Module —...
Page 664 662 STARTING AND OPERATING The user interface consists of the following: Manual Brake Control Lever Slide the manual brake control lever to the left to activate power to the trailer’s electric brakes independent of the tow vehicle’s brakes. If the manual brake control lever is activated while the brake is also applied, the greater of the two inputs determines the power sent to the trailer brakes.
Page 665 STARTING AND OPERATING 663 sliding the manual brake control lever will display the Adjusting GAIN GAIN setting for 10 seconds and the “Trailer Brake Status NOTE: This should only be performed in a traffic free Indicator Light” will not be displayed. environment at speeds of approximately 20–25 mph If a fault is detected in the trailer wiring or the Integrated (30–40 km/h).
Page 666 664 STARTING AND OPERATING 5. Press the RIGHT arrow on the steering wheel to enter 9. If the trailer wheels lockup (indicated by squealing tires), reduce the GAIN setting; if the trailer wheels “TRAILER TOW”. turn freely, increase the GAIN setting. 6.
Page 667 STARTING AND OPERATING 665 Display Messages WARNING! The trailer brake control interacts with the Electronic Connecting a trailer that is not compatible with the Vehicle Information Center (EVIC) or Driver Information ITBM system may result in reduced or complete loss Display (DID).
Page 668 666 STARTING AND OPERATING Towing Requirements — Trailer Lights And Wiring Whenever you pull a trailer, regardless of the trailer size, stoplights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a four- and seven- pin wiring harness.
Page 669: Towing Tips
STARTING AND OPERATING 667 Towing Tips Before setting out on a trip, practice turning, stopping and backing the trailer up in an area away from heavy traffic. Automatic Transmission The DRIVE range can be selected when towing. The transmission controls include a drive strategy to avoid frequent shifting when towing.
Page 670 668 STARTING AND OPERATING When towing a loaded trailer up steep grades at low Electronic Speed Control — If Equipped speeds (20 mph [32 km/h] or below), holding your • Do not use in hilly terrain or with heavy loads. vehicle in first gear (using the ERS shift control) can help to avoid transmission overheating.
Page 671: Snowplow
STARTING AND OPERATING 669 Air Conditioning WARNING! Turn off temporarily. Snowplows and other aftermarket equipment should Air Suspension System not be added to the front end of your vehicle. The airbag crash sensors may be affected by the change in To aid in attaching/detaching the trailer from the vehicle, the front end structure.
Page 672: 2500/3500 Models Only
670 STARTING AND OPERATING WARNING! (Continued) WARNING! Do not expect that the airbag will perform as de- Attaching a snowplow to this vehicle could adversely scribed earlier in this manual. affect performance of the airbag system in a collision. Do not expect that the airbag will perform as de- 2500/3500 Models Only scribed earlier in this manual.
Page 673 STARTING AND OPERATING 671 • Check the runners and cutting edge for excessive wear. The loaded vehicle weight, including the snowplow The cutting edge should be ¼ to ½ in (6 cm to 1.2 cm) system, all aftermarket accessories, driver, passengers, above ground in snow plowing position.
Page 674 672 STARTING AND OPERATING Maintain and operate your vehicle and snowplow equip- General Maintenance ment following the recommendations provided by the Snowplows should be maintained in accordance with the specific snowplow manufacturer. plow manufacturer’s instructions. Over The Road Operation With Snowplow Keep all snowplow electrical connections and battery Attached terminals clean and free of corrosion.
Page 675: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 673 RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF Two-Wheel Four-Wheel Drive Models The Ground Drive Models Flat Tow NONE See Instructions ALLOWED • Automatic transmission in PARK • Manual transmission in gear (NOT in NEUTRAL) •...
Page 676: Recreational Towing - Two-Wheel Drive Models
674 STARTING AND OPERATING NOTE: Vehicles equipped with air suspension must be NOTE: If vehicle is equipped with air suspension, ensure placed in Transport mode before tying them down (from the vehicle is set to Normal Ride Height. the body) on a trailer or flatbed truck. Refer to “Air 2.
Page 677: Recreational Towing - Four-Wheel Drive Models
STARTING AND OPERATING 675 Recreational Towing — Four-Wheel Drive Models CAUTION! NOTE: Both the manual shift and electronic shift trans- • Towing with the rear wheels on the ground will fer cases must be shifted into NEUTRAL (N) for recre- cause severe transmission damage.
Page 678 676 STARTING AND OPERATING CAUTION! (Continued) CAUTION! (Continued) • Tow only in the forward direction. Towing this • Do not disconnect the rear driveshaft because fluid vehicle backwards can cause severe damage to the will leak from the transfer case, causing damage to transfer case.
Page 679 STARTING AND OPERATING 677 NOTE: If vehicle is equipped with air suspension, ensure WARNING! (Continued) the vehicle is set to Normal Ride Height. the parking brake. The transfer case NEUTRAL (N) 3. Press and hold the brake pedal. position disengages both the front and rear drive- shafts from the powertrain and will allow the vehicle 4.
Page 680 678 STARTING AND OPERATING 5. Release the parking brake. 11. Turn the ignition switch to the OFF position, then cycle the key or the Keyless Enter-N-Go™ button to 6. Shift the transmission into REVERSE. the RUN position and back to the OFF position. 7.
Page 681 STARTING AND OPERATING 679 • The ignition switch must be in the ON/RUN position Shifting Out Of NEUTRAL (N) for a shift to take place and for the position indicator Use the following procedure to prepare your vehicle for lights to be operable. If the ignition switch is not in the normal usage.
Page 682 680 STARTING AND OPERATING (N) button has been released, the transfer case will 6. Release the brake pedal (and clutch pedal on a manual shift to the position indicated by the selector switch. transmission). • With electronic shift transfer case with pushbutton 7.
Page 683 STARTING AND OPERATING 681 the shift, the NEUTRAL (N) indicator light will flash continuously until all requirements are met or until the button is released. • The ignition switch must be in the ON/RUN position for a shift to take place and for the position indicator lights to be operable.
Page 685: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...685 HOISTING ......728 IF YOUR ENGINE OVERHEATS .
Page 686 684 WHAT TO DO IN EMERGENCIES MANUAL PARK RELEASE — 8 SPEED ▫ Two-Wheel Drive Models ....742 TRANSMISSION ..... . .738 ▫...
Page 687: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 685 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located on the In any of the following situations, you can reduce the upper switch bank just below the radio. potential for overheating by taking the appropriate action. •...
Page 688: Wheel And Tire Torque Specifications
686 WHAT TO DO IN EMERGENCIES WHEEL AND TIRE TORQUE SPECIFICATIONS CAUTION! Proper lug nut/bolt torque is very important to ensure Driving with a hot cooling system could damage that the wheel is properly mounted to the vehicle. Any your vehicle. If the temperature gauge reads HOT time a wheel has been removed and reinstalled on the (H), pull over and stop the vehicle.
Page 689 WHAT TO DO IN EMERGENCIES 687 NOTE: Dual wheels are flat mounted, center piloted. Inspect the wheel mounting surface prior to mounting The lug nuts are a two-piece assembly. When the tires are the tire and remove any corrosion or loose particles. being rotated or replaced, clean these lug nuts and add two drops of oil at the interface between the lug nut/bolt and the washer.
Page 690: Jacking And Tire Changing
688 WHAT TO DO IN EMERGENCIES After 25 miles (40 km) check the lug nut/bolt torque to be WARNING! sure that all the lug nuts/bolts are properly seated against the wheel. To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
Page 691 WHAT TO DO IN EMERGENCIES 689 If your vehicle is equipped with a touchscreen, this WARNING! (Continued) feature can be activated through the Uconnect® system. • Being under a jacked-up vehicle is dangerous. The Refer to “Uconnect® Settings” in “Understanding Your vehicle could slip off the jack and fall on you.
Page 692 690 WHAT TO DO IN EMERGENCIES passengers seat. To remove the cover, pull the front part Remove the jack and tools by turning the wing bolt of the cover (closest to the front of the seat) toward you counterclockwise, remove the wing bolt and then slide to release a locking tab.
Page 693 WHAT TO DO IN EMERGENCIES 691 Release the tool bag straps from the jack and remove There are 2 ways to assemble the tools: tools from bag. Assembled For Spare Tire Lowering/Raising Jack And Tool Bag Assembled For Spare Tire Lowering/Raising 1 —...
Page 694 692 WHAT TO DO IN EMERGENCIES Assembled For Jack Operation CAUTION! • The wheel wrench can only be attached to exten- sion 1. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 3 is positioned correctly over the winch mechanism adjusting nut.
Page 695 WHAT TO DO IN EMERGENCIES 693 WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 696 694 WHAT TO DO IN EMERGENCIES 2. Rotate the wheel wrench handle counterclockwise 3. Pull the spare tire out from under the vehicle to gain until the spare tire is on the ground with enough cable access to the spare tire retainer. slack to allow you to pull it out from under the vehicle.
Page 697 WHAT TO DO IN EMERGENCIES 695 4. Lift the spare tire with one hand to give clearance to 5. Pull the retainer through the center of the wheel. tilt the retainer at the end of the cable. Pulling The Retainer Through The Center Of The Wheel Gaining Access To The Retainer NOTE: The winch mechanism is designed for use with the jack extension tube only.
Page 698 696 WHAT TO DO IN EMERGENCIES Preparations 5. Turn the ignition OFF. 1. Park the vehicle on a firm, level surface. Avoid ice or Block both the front and rear of the wheel diagonally slippery areas. opposite the jacking position. For example, if the right front wheel is being changed, block the left rear wheel.
Page 699 WHAT TO DO IN EMERGENCIES 697 Jack Instructions (1500 Series) WARNING! (Continued) • Do not let anyone sit in the vehicle when it is on a WARNING! jack. Carefully follow these tire changing warnings to • Do not get under the vehicle when it is on a jack. If help prevent personal injury or damage to your you need to get under a raised vehicle, take it to a vehicle:...
Page 700 698 WHAT TO DO IN EMERGENCIES 3. Placement of the jack: 4x2 Series Trucks Front Jacking Location There is a jack location indicator on the rear portion of the lower control arm. Jack Warning Label CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle.
Page 701 WHAT TO DO IN EMERGENCIES 699 When changing a front wheel, place the scissor jack 4x4 Series Trucks Front Jacking Location under the rear portion of the lower control arm as shown There is a jack location indicator on the rear portion of the below.
Page 702 700 WHAT TO DO IN EMERGENCIES When changing a front wheel, place the scissor jack 4x2 and 4x4 Rear Jacking Location under the rear portion of the lower control arm as shown Operate the jack using the jack drive tube and the wheel below.
Page 703 WHAT TO DO IN EMERGENCIES 701 4. By rotating the lug wrench clockwise, raise the vehicle until the wheel just clears the surface. WARNING! Raising the vehicle higher than necessary can make the vehicle unstable and cause a collision. It could slip off the jack and hurt someone near it.
Page 704 702 WHAT TO DO IN EMERGENCIES each nut has been tightened twice. For the correct lug 8. Lower the jack to its fully closed position. If the bottle nut torque refer to “Torque Specifications” in this jack will not lower by turning the dial (thumbwheel) section.
Page 705 WHAT TO DO IN EMERGENCIES 703 WARNING! A loose tire thrown forward in a collision or hard stop could injure the occupants in the vehicle. Have the deflated (flat) tire repaired or replaced immedi- ately. 1. Turn the wheel so that the valve stem is facing the ground and toward the rear of the vehicle for conve- nience in checking the spare tire inflation.
Page 706 704 WHAT TO DO IN EMERGENCIES 2. Lift the spare tire with one hand to give clearance to Insert the tube through the access hole between the tilt the retainer at the end of the cable and position it lower tailgate and the top of the bumper and into the properly across the wheel opening.
Page 707 WHAT TO DO IN EMERGENCIES 705 4. Rotate the wheel wrench handle clockwise until the NOTE: The winch mechanism is designed for use with wheel is drawn into place against the underside of the the jack extension tube only. Use of an air wrench or other vehicle.
Page 708 706 WHAT TO DO IN EMERGENCIES Jack And Tool Bag Jack And Tools Tied 4. Place the jack and tools in the storage position holding 3. Secure the tool bag straps to the jack. the jack by the jack turn-screw, slip the jack and tools under the seat so that the bottom slot engages into the fastener on the floor.
Page 709 WHAT TO DO IN EMERGENCIES 707 Jack Hold Down Fastener Jack And Tools (1500 Series) NOTE: Ensure that the jack slides into the front hold WARNING! down location. After using the jack and tools, always reinstall them 5. Turn the wing bolt clockwise to secure to the floor pan. in the original carrier and location.
Page 710: Jacking And Tire Changing 2500 And 3500 Series Trucks
708 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Being under a jacked-up vehicle is dangerous. The you may experience abrupt stopping, rapid accelera- vehicle could slip off the jack and fall on you. You tion or sharp turns. A loose jack, tools, bracket or could be crushed.
Page 711 WHAT TO DO IN EMERGENCIES 709 Jack Location The jack and jack tools are stored under the front passenger seat. Removal Of Jack And Tools (2500, 3500 Series) To access the jack and jack tools you must remove the plastic access cover, located on the side of the front passengers seat.
Page 712 710 WHAT TO DO IN EMERGENCIES Wing Bolt/Jack And Tools (2500/3500 Series) Jack And Tools Bracket Assembly Remove the jack and tools from the bracket assembly. Turn the jack-turn-screw counterclockwise to release jack from bracket assembly.
Page 713 WHAT TO DO IN EMERGENCIES 711 There are 2 ways to assemble the tools: CAUTION! Assembled For Spare Tire Lowering/Raising • The wheel wrench can only be attached to exten- sion 1. • When attaching the tool to the winch mechanism be sure the large flared end opening on extension 3 is positioned correctly over the winch mechanism adjusting nut.
Page 714 712 WHAT TO DO IN EMERGENCIES Assembled For Jack Operation WARNING! After using the jack and tools, always reinstall them in the original carrier and location. While driving you may experience abrupt stopping, rapid accelera- tion or sharp turns. A loose jack, tools, bracket or other objects in the vehicle may move around with force, resulting in serious injury.
Page 715 WHAT TO DO IN EMERGENCIES 713 2. Rotate the wheel wrench handle counterclockwise until the spare tire is on the ground with enough cable slack to allow you to pull it out from under the vehicle. Inserting The Jack Extension Tube Into The Access Hole Rotating The Wheel Wrench Handle...
Page 716 714 WHAT TO DO IN EMERGENCIES 3. Pull the spare tire out from under the vehicle to gain 4. Lift the spare tire with one hand to give clearance to access to the spare tire retainer. tilt the retainer at the end of the cable. Pulling The Spare Tire Out Gaining Access To The Retainer...
Page 717 WHAT TO DO IN EMERGENCIES 715 5. Pull the retainer through the center of the wheel. Preparations 1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas. WARNING! Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel.
Page 718 716 WHAT TO DO IN EMERGENCIES 5. Turn the ignition OFF. WARNING! (Continued) Block both the front and rear of the wheel diagonally • Always park on a firm, level surface as far from the opposite the jacking position. For example, if the right edge of the roadway as possible before raising the front wheel is being changed, block the left rear wheel.
Page 719 WHAT TO DO IN EMERGENCIES 717 WARNING! (Continued) • Only use the jack in the positions indicated and for lifting this vehicle during a tire change. • If working on or near a roadway, be extremely careful of motor traffic. •...
Page 720 718 WHAT TO DO IN EMERGENCIES 1. Remove the spare wheel, jack, and tools from storage. 2. Using the lug wrench, loosen, but do not remove, the wheel nuts by turning them counterclockwise one turn while the wheel is still on the ground. Changing a dually tire requires the lug wrench adapter.
Page 721 WHAT TO DO IN EMERGENCIES 719 Front Jacking Location When changing the front wheel, assemble the jack drive tube to the jack and connect the drive tube to the extension tube. Place the jack under the axle as close to the tire as possible with the drive tubes extending to the front.
Page 722 720 WHAT TO DO IN EMERGENCIES Rear Jacking Location Connect the jack tube extension and wheel wrench. When changing a rear wheel, assemble the jack drive CAUTION! tube to the jack and connect the drive tube to the Before raising the wheel off the ground, make sure extension tube.
Page 723 WHAT TO DO IN EMERGENCIES 721 5. Remove the wheel nuts and pull the wheel off. On single rear-wheel (SRW) trucks, install the spare wheel and wheel nuts with the cone shaped end of the wheel nuts toward the wheel. On 3500 dual rear-wheel models (DRW) trucks, if the outer tire is being re- placed then leave the inner wheel on the vehicle.
Page 724 722 WHAT TO DO IN EMERGENCIES them checked with a torque wrench by you authorized dealer or service station. WARNING! A loose tire or jack thrown forward in a collision or hard stop could injure someone in the vehicle. Al- ways stow the jack parts and the extra tire and wheel in the places provided.
Page 725 WHAT TO DO IN EMERGENCIES 723 9. Adjust the tire pressure when possible. 1. Turn the wheel so that the valve stem is facing the ground and toward the rear of the vehicle for conve- NOTE: Do not oil wheel studs. For chrome wheels, do nience in checking the spare tire inflation.
Page 726 724 WHAT TO DO IN EMERGENCIES 2. Lift the spare tire with one hand to give clearance to 3. Attach the wheel wrench to the jack extension tube tilt the retainer at the end of the cable and position it with the curved angle facing away from the vehicle.
Page 727 WHAT TO DO IN EMERGENCIES 725 4. Rotate the wheel wrench handle clockwise until the NOTE: The winch mechanism is designed for use with wheel is drawn into place against the underside of the the jack extension tube only. Use of an air wrench or other vehicle.
Page 728 726 WHAT TO DO IN EMERGENCIES Jack And Tools Bracket Assembly Jack Hold Down Fastener 3. Place the jack and tool bracket assembly in the storage NOTE: Ensure that the jack and tool bracket assembly position holding the jack by the jack turn-screw, slip slides into the front hold down location.
Page 729 WHAT TO DO IN EMERGENCIES 727 Hub Caps/Wheel Covers — If Equipped The hub caps must be removed before raising the vehicle off the ground. CAUTION! Use extreme caution when removing the front and rear center caps. Damage can occur to the center cap and/or the wheel if screwdriver type tools are used.
Page 730: Hoisting
728 WHAT TO DO IN EMERGENCIES On 3500 models with dual rear wheels (DRW), you must You must use the flat end of the lug wrench to pull off the first remove the hub caps. The jack handle driver has a wheel skins.
Page 731: Jump-Starting Procedures
WHAT TO DO IN EMERGENCIES 729 CAUTION! CAUTION! Never use a floor jack directly under the differential Do not use a portable battery booster pack or any housing of a loaded truck or damage to your vehicle other booster source with a system voltage greater may result.
Page 732 730 WHAT TO DO IN EMERGENCIES Battery (Gas Model Shown) Battery (Diesel Model Shown) 1 — Positive Battery Post 1 — Positive Battery Post 2 — Fuses 2 — Fuses...
Page 733: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 731 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. • Take care to avoid the radiator cooling fan when- ever the hood is raised.
Page 734 732 WHAT TO DO IN EMERGENCIES 4. Connect the opposite end of the negative (-) jumper CAUTION! cable to a good engine ground (exposed metal part of the discharged vehicle’s engine) away from the battery Failure to follow these procedures could result in and the fuel injection system.
Page 735 WHAT TO DO IN EMERGENCIES 733 4. Disconnect the opposite end of the positive (+) jumper CAUTION! cable from the positive (+) post of the vehicle with the discharged battery. Do not connect jumper cable to any of the fuses on the positive battery terminal.
Page 736: Freeing A Stuck Vehicle
734 WHAT TO DO IN EMERGENCIES FREEING A STUCK VEHICLE CAUTION! If your vehicle becomes stuck in mud, sand, or snow, it Racing the engine or spinning the wheels may lead to can often be moved using a rocking motion. Turn the transmission overheating and failure.
Page 737: Emergency Tow Hooks - If Equipped
WHAT TO DO IN EMERGENCIES 735 CAUTION! WARNING! (Continued) explode and injure someone. Do not spin your vehi- • When “rocking” a stuck vehicle by shifting be- cle’s wheels faster than 30 mph (48 km/h) or for tween DRIVE/2nd gear and REVERSE, do not spin longer than 30 seconds continuously without stop- the wheels faster than 15 mph (24 km/h), or drive- ping when you are stuck and do not let anyone near...
Page 738: Shift Lever Override
736 WHAT TO DO IN EMERGENCIES SHIFT LEVER OVERRIDE WARNING! If a malfunction occurs and the shift lever cannot be • Do not use a chain for freeing a stuck vehicle. moved out of the PARK position, you can use one of the Chains may break, causing serious injury or death.
Page 739: Center Console Shifter - If Equipped
WHAT TO DO IN EMERGENCIES 737 Center Console Shifter — If Equipped 1. Turn the engine off. 2. Firmly apply the parking brake. 3. Using a small screwdriver or similar tool, remove the shift lever override access cover (located to the right of the shift lever).
Page 740 738 WHAT TO DO IN EMERGENCIES MANUAL PARK RELEASE — 8 SPEED TRANSMISSION WARNING! Always secure your vehicle by fully applying the parking brake, before activating the Manual Park Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle.
Page 741 WHAT TO DO IN EMERGENCIES 739 2. Using a small screwdriver or similar tool, remove the Manual Park Release access cover, which is just above the parking brake release handle, below and to the left of the steering column. 3. Using the screwdriver or similar tool, push the Manual Park Release lever locking tab (just below the middle of the lever) to the right.
Page 742 740 WHAT TO DO IN EMERGENCIES To Reset The Manual Park Release: TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled 1. Push the locking tab to the right, to unlock the lever. vehicle using a commercial wrecker service. If the trans- 2.
Page 743 WHAT TO DO IN EMERGENCIES 741 Towing Wheels 2WD Models 4WD Models Condition OFF the Ground Flat Tow NONE If transmission is operable: See instructions in “Recreational Tow- • Transmission in NEUTRAL ing” under “Starting and Operating” • 30 mph (48 km/h) max speed •...
Page 744 742 WHAT TO DO IN EMERGENCIES If you must use the accessories (wipers, defrosters, etc.) Two-Wheel Drive Models while being towed, the ignition must be in the ON/RUN The manufacturer recommends towing your vehicle with position, not the ACC position. all four wheels OFF the ground using a flatbed.
Page 745 WHAT TO DO IN EMERGENCIES 743 and the rear wheels on a towing dolly, or (when using a forward direction, with ALL wheels on the ground), IF suitable steering wheel stabilizer to hold the front wheels the transfer case is in NEUTRAL (N) and the transmis- in the straight position) with the rear wheels raised and sion is in PARK (for automatic transmissions) or in gear the front wheels on the ground.
Page 747: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 3.6L ..748 ▫ Engine Oil ......755 ENGINE COMPARTMENT —...
Page 748 746 MAINTAINING YOUR VEHICLE ▫ Adding Washer Fluid ....771 REPLACEMENT BULBS ....808 ▫...
Page 749 MAINTAINING YOUR VEHICLE 747 FLUID CAPACITIES ....819 ▫ Engine ......821 FLUIDS, LUBRICANTS AND GENUINE ▫...
Page 750: Engine Compartment - 3.6L
748 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 3.6L 1 — Air Cleaner Filter 5 — Battery 2 — Engine Oil Dipstick 6 — Washer Fluid Reservoir 3 — Engine Oil Fill 7 — Power Distribution Center (Fuses) 4 — Brake Fluid Reservoir 8 —...
Page 751: Engine Compartment - 5.7L
MAINTAINING YOUR VEHICLE 749 ENGINE COMPARTMENT — 5.7L 1 — Air Cleaner Filter 7 — Washer Fluid Reservoir 2 — Automatic Transmission Dipstick (6-Speed Trans Only) 8 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 9 — Power Steering Fluid Reservoir (2500/3500 Models Only) 4 —...
Page 752: Engine Compartment - 6.4L
750 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.4L 1 — Coolant Pressure Bottle 6 — Battery 2 — Transmission Dipstick 7 — Power Distribution Center (Fuses) 3 — Engine Oil Fill 8 — Washer Solvent 4 — Engine Oil Dipstick 9 —...
Page 753: Onboard Diagnostic System (Obd Ii)
MAINTAINING YOUR VEHICLE 751 ONBOARD DIAGNOSTIC SYSTEM (OBD II) CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 754: Emissions Inspection And Maintenance Programs
752 MAINTAINING YOUR VEHICLE (EVIC)” or “Driver Information Display (DID)” in “Un- Normally, the OBD II system will be ready. The OBD II derstanding Your Instrument Panel” for further informa- system may not be ready if your vehicle was recently tion.
Page 755: Replacement Parts
MAINTAINING YOUR VEHICLE 753 3. Approximately 15 seconds later, one of two things will Regardless of whether your vehicle’s OBD II system is happen: ready or not, if the MIL is illuminated during normal vehicle operation you should have your vehicle serviced •...
Page 756: Dealer Service
754 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 757: Engine Oil
MAINTAINING YOUR VEHICLE 755 The best time to check the engine oil level is about five CAUTION! (Continued) minutes after a fully warmed up engine is shut off. • Your vehicle has been built with improved fluids Checking the oil while the vehicle is on level ground will that protect the performance and durability of your improve the accuracy of the oil level readings.
Page 758 756 MAINTAINING YOUR VEHICLE Change Engine Oil Engine Oil Selection The oil change indicator system will remind you that it is For best performance and maximum protection under all time to take your vehicle in for scheduled maintenance. types of operating conditions, the manufacturer only Refer to the “Maintenance Schedule”...
Page 759 MAINTAINING YOUR VEHICLE 757 NOTE: MOPAR® SAE 5W-30 engine oil approved to CAUTION! Chrysler Material Standard MS-6395 may be used when SAE 5W-20 engine oil meeting MS-6395 is not available. Do not use chemical flushes in your engine oil as the chemicals can damage your engine.
Page 760: Engine Oil Filter
758 MAINTAINING YOUR VEHICLE • For 2500/3500 trucks with a 5.7L engine operating Disposing Of Used Engine Oil And Oil Filters under a gross combined weight rating of 14,000 lbs (6 Care should be taken in disposing of used engine oil and 350 kg) or greater, SAE 5W-30 engine oil is recom- oil filters from your vehicle.
Page 761: Engine Air Cleaner Filter
MAINTAINING YOUR VEHICLE 759 Engine Air Cleaner Filter Selection Engine Air Cleaner Filter Refer to the “Maintenance Schedule” for the proper The quality of replacement engine air cleaner filters maintenance intervals. varies considerably. Only high quality filters should be used to assure most efficient service. MOPAR® engine air WARNING! cleaner filters are a high quality filter and are recom- mended.
Page 762 760 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Removal 1. Release the spring clips from the air cleaner cover. 6.4L Air Cleaner Filter Cover 1 — Clean Air Hose Clamp 3.6L/5.7L Air Cleaner Filter Cover 2 — Spring Clips 1 — Clean Air Hose Clamp 2 —...
Page 763 MAINTAINING YOUR VEHICLE 761 2. Lift the air cleaner cover to access the air cleaner filter. 3. Remove the air cleaner filter element from the housing assembly. Open Air Cleaner Filter Assembly Air Cleaner Filter 1 — Air Cleaner Cover 1 —...
Page 764: Accessory Drive Belt Inspection
762 MAINTAINING YOUR VEHICLE Engine Air Cleaner Filter Installation WARNING! (Continued) NOTE: Inspect and clean the housing if dirt or debris is • When working near the radiator cooling fan, dis- present before replacing the air filter element. connect the fan motor lead. The fan is temperature controlled and can start at any time regardless of 1.
Page 765 MAINTAINING YOUR VEHICLE 763 normal. Any belt with cracks running along a rib must be • Rib or belt wear replaced. Also have the belt replaced if it has excessive • Longitudinal belt cracking (cracks between two ribs) wear, frayed cords or severe glazing. •...
Page 766: Maintenance-Free Battery
764 MAINTAINING YOUR VEHICLE Maintenance-Free Battery WARNING! (Continued) Your vehicle is equipped with a maintenance-free battery. • Battery gas is flammable and explosive. Keep You will never have to add water, nor is periodic main- flame or sparks away from the battery. Do not use tenance required.
Page 767: Air Conditioner Maintenance
MAINTAINING YOUR VEHICLE 765 Air Conditioner Maintenance CAUTION! For best possible performance, your air conditioner • It is essential when replacing the cables on the should be checked and serviced by an authorized dealer battery that the positive cable is attached to the at the start of each warm season.
Page 768: Front Driveshaft Lubrication - 2500/3500 (Four-Wheel Drive Models Only)
766 MAINTAINING YOUR VEHICLE Refrigerant Recovery And Recycling HFO 1234yf — CAUTION! If Equipped Do not use chemical flushes in your air conditioning HFO 1234yf Air Conditioning Refrigerant is a hydro- system as the chemicals can damage your air condi- fluorocarbon (HFC) that is endorsed by the Environmen- tioning components.
Page 769: Body Lubrication
MAINTAINING YOUR VEHICLE 767 Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as Clean the rubber edges of the wiper blades and the seat tracks, door hinge pivot points and rollers, liftgate, windshield periodically with a sponge or soft cloth and a tailgate, decklid, sliding doors and hood hinges, should mild nonabrasive cleaner.
Page 770 768 MAINTAINING YOUR VEHICLE The wiper blades and wiper arms should be inspected Wiper Blade Removal/Installation periodically, not just when wiper performance problems are experienced. This inspection should include the fol- CAUTION! lowing points: Do not allow the wiper arm to spring back against •...
Page 771 MAINTAINING YOUR VEHICLE 769 2. To disengage the wiper blade from the wiper arm, press the release tab on the wiper blade and while holding the wiper arm with one hand, slide the wiper blade down towards the base of the wiper arm. Wiper Blade With Release Tab In Locked Position 1 —...
Page 772 770 MAINTAINING YOUR VEHICLE Wiper Blade With Release Tab In Unlocked Position Wiper Blade Removed From Wiper Arm 1 — Wiper Blade 1 — Wiper Blade 2 — Wiper Arm 2 — Wiper Arm 3 — Release Tab 3 — Release Tab 3.
Page 773: Adding Washer Fluid
MAINTAINING YOUR VEHICLE 771 Installing The Front Wipers Adding Washer Fluid The fluid reservoir is located under the hood and should 1. Lift the wiper arm off of the glass, until the wiper arm be checked for fluid level at regular intervals. Fill the is in the full up position.
Page 774: Exhaust System
772 MAINTAINING YOUR VEHICLE Exhaust System WARNING! The best protection against carbon monoxide entry into Commercially available windshield washer solvents the vehicle body is a properly maintained engine exhaust are flammable. They could ignite and burn you. Care system. must be exercised when filling or working around If you notice a change in the sound of the exhaust system;...
Page 775 MAINTAINING YOUR VEHICLE 773 WARNING! CAUTION! • Exhaust gases can injure or kill. They contain • The catalytic converter requires the use of un- carbon monoxide (CO), which is colorless and leaded fuel only. Leaded gasoline will destroy the odorless. Breathing it can make you unconscious effectiveness of the catalyst as an emissions control and can eventually poison you.
Page 776: Cooling System
774 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic converter • Do not try to start the engine by pushing or towing the will not require maintenance. However, it is important to vehicle. keep the engine properly tuned to assure proper catalyst •...
Page 777 MAINTAINING YOUR VEHICLE 775 Engine Coolant Checks engine coolant (antifreeze) from the radiator drain cock. The radiator drain cock is located in the lower radiator Check the engine coolant (antifreeze) protection every 12 tank. If the cap is sealing properly, the engine coolant months (before the onset of freezing weather, where (antifreeze) will begin to drain from the coolant expan- applicable).
Page 778 776 MAINTAINING YOUR VEHICLE Selection Of Coolant CAUTION! (Continued) Refer to “Fluids, Lubricants, and Genuine Parts” in • Do not use water alone or alcohol-based engine “Maintaining Your Vehicle” for further information. coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not CAUTION! be compatible with the radiator engine coolant and may plug the radiator.
Page 779 MAINTAINING YOUR VEHICLE 777 you use the same engine coolant (OAT coolant conform- (antifreeze) solution. The use of lower quality water ing to MS-12106) throughout the life of your vehicle. will reduce the amount of corrosion protection in the engine cooling system. Please review these recommendations for using Organic Additive Technology (OAT) engine coolant (antifreeze) Please note that it is the owner’s responsibility to main-...
Page 780 778 MAINTAINING YOUR VEHICLE Cooling System Pressure Cap WARNING! (Continued) The cap must be fully tightened to prevent loss of engine • Do not use a pressure cap other than the one coolant (antifreeze), and to ensure that the engine coolant specified for your vehicle.
Page 781 MAINTAINING YOUR VEHICLE 779 Checking Coolant Level — 3.6L and 5.7L Engines With the engine OFF and cold, the level of the engine coolant should be between the ADD and SAFE range on the dipstick. To check the coolant level: 1.
Page 782 780 MAINTAINING YOUR VEHICLE As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle.
Page 783 MAINTAINING YOUR VEHICLE 781 Points To Remember • If frequent engine coolant (antifreeze) additions are required, the cooling system should be pressure tested NOTE: When the vehicle is stopped after a few miles/ for leaks. kilometers of operation, you may observe vapor coming •...
Page 784: Brake System
782 MAINTAINING YOUR VEHICLE Brake Fluid Level Check Brake System In order to assure brake system performance, all brake The fluid level of the master cylinder should be checked system components should be inspected periodically. when performing under the hood service or immediately Refer to the “Maintenance Schedule”...
Page 785 MAINTAINING YOUR VEHICLE 783 WARNING! WARNING! (Continued) • To avoid contamination from foreign matter or • Use only manufacturer’s recommended brake moisture, use only new brake fluid or fluid that has fluid. Refer to “Fluids, Lubricants, and Genuine been in a tightly closed container. Keep the master Parts”...
Page 786: Rear Axle And 4X4 Front Driving Axle Fluid Level
784 MAINTAINING YOUR VEHICLE For 1500 Model axles, the fluid level should be even with WARNING! (Continued) the bottom of the fill hole (within 1/4 in (6.4 mm) of edge • Do not allow petroleum based fluid to contaminate of hole) for the FDU215 HD front axle and C235FE rear the brake fluid.
Page 787: Transfer Case
MAINTAINING YOUR VEHICLE 785 NOTE: The presence of water in the gear lubricant will NOTE: When refilling an axle with a Limited Slip Differ- result in corrosion and possible failure of differential ential, (which requires a Limited Slip Additive), the components.
Page 788: Automatic Transmission
786 MAINTAINING YOUR VEHICLE Automatic Transmission CAUTION! (Continued) Selection Of Lubricant shudder, and will require more frequent fluid and filter changes. Refer to “Fluids, Lubricants, and It is important to use the proper transmission fluid to Genuine Parts” in this section for fluid specifica- ensure optimum transmission performance and life.
Page 789 MAINTAINING YOUR VEHICLE 787 CAUTION! CAUTION! If a transmission fluid leak occurs, visit your autho- Do not use chemical flushes in your transmission as rized dealer immediately. Severe transmission dam- the chemicals can damage your transmission compo- age may occur. Your authorized dealer has the proper nents.
Page 790 788 MAINTAINING YOUR VEHICLE Use the following procedure to check the transmission 6. Remove the dipstick, wipe it clean and reinsert it until fluid level properly: seated. 1. Monitor the transmission temperature using the 7. Remove the dipstick again and note the fluid level on EVIC/DID screen, and operate the vehicle as required both sides.
Page 791 MAINTAINING YOUR VEHICLE 789 NOTE: If it is necessary to check the transmission below NOTE: To prevent dirt and water from entering the the operating temperature, the fluid level should be transmission after checking or replenishing fluid, make between the two “COLD” (lower) holes on the dipstick sure that the dipstick cap is properly reseated.
Page 792: Appearance Care And Protection From Corrosion
790 MAINTAINING YOUR VEHICLE Fluid And Filter Changes hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under- Refer to the “Maintenance Schedule” for the proper body protection. maintenance intervals. The following maintenance recommendations will enable In addition, change the fluid and filters if the fluid you to obtain maximum benefit from the corrosion becomes contaminated (with water, etc.), or if the trans-...
Page 793 MAINTAINING YOUR VEHICLE 791 Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR® Car Wash, or a mild such as steel wool or scouring powder that will car wash soap, and rinse the panels completely with scratch metal and painted surfaces.
Page 794 792 MAINTAINING YOUR VEHICLE • If your vehicle is damaged due to a collision or similar • To remove heavy soil and/or excessive brake dust, use cause that destroys the paint and protective coating, MOPAR® Wheel Cleaner. have your vehicle repaired as soon as possible. The NOTE: If your vehicle is equipped with Dark Vapor or cost of such repairs is considered the responsibility of Black Satin Chrome wheels DO NOT USE wheel cleaners,...
Page 795 MAINTAINING YOUR VEHICLE 793 • For grease stains, apply MOPAR® Multi-Purpose CAUTION! (Continued) Cleaner to a clean, damp cloth and remove stain. Use or harsh brushes that may damage the wheel’s pro- a fresh, damp towel to remove soap residue. tective finish.
Page 796 794 MAINTAINING YOUR VEHICLE and MOPAR® Total Clean. Care should be taken to avoid Cleaning Headlights soaking your leather upholstery with any liquid. Please Your vehicle is equipped with plastic headlights and fog do not use polishes, oils, cleaning fluids, solvents, deter- lights that are lighter and less susceptible to stone break- gents, or ammonia-based cleaners to clean your leather age than glass headlights.
Page 797 MAINTAINING YOUR VEHICLE 795 cleaner. Use caution when cleaning the inside rear win- Seat Belt Maintenance dow equipped with electric defrosters or the right rear Do not bleach, dye or clean the belts with chemical quarter window equipped with the radio antenna. Do solvents or abrasive cleaners.
Page 798 796 MAINTAINING YOUR VEHICLE rinse all loose dirt from your truck bed and clean your WARNING! (Continued) truck at least twice per year using the MOPAR® assemblies must be replaced after a collision if they Spray-On Bedliner Conditioner available at your local have been damaged (i.e., bent retractor, torn web- authorized dealer.
Page 799: Fuses
MAINTAINING YOUR VEHICLE 797 to cover the metal exposed by the scratch is required. To WARNING! repair a tear or gouge, follow the directions provided in the MOPAR® Quick Repair Kit. Do not use silicon-based protection products to clean your bedliner. Silicon-based products can become FUSES slippery and may result in personal injury.
Page 800: Power Distribution Center
798 MAINTAINING YOUR VEHICLE on the inside cover, otherwise the cavity number of each WARNING! (Continued) fuse is stamped on the inside cover that corresponds to • Before replacing a fuse, make sure that the ignition the following chart. is off and that all the other services are switched off and/or disengaged.
Page 801 MAINTAINING YOUR VEHICLE 799 Cavity Cartridge Fuse Micro Fuse Description 80 Amp Black Rad Fan Control Module – If equipped 60 Amp Yellow Rad Fan – If Equipped 40 Amp Green Compressor for Air Suspension – If Equipped 40 Amp Green Antilock Brakes/Electronic Stability Control Pump 40 Amp Green...
Page 802 800 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 40 Amp Green Body Controller / Exterior Lighting #2 50 Amp Red Body Controller / Exterior Lighting #2 – If Equipped with Stop/Start 30 Amp Pink Integrated Trailer Brake Module – If Equipped 40 Amp Green Body Controller #3 / Interior Lights 40 Amp Green...
Page 803 MAINTAINING YOUR VEHICLE 801 Cavity Cartridge Fuse Micro Fuse Description 20 Amp Blue Engine Control Module 30 Amp Pink (Cummins Diesel) 30 Amp Pink Body Controller #1 30 Amp Pink Driver Door Module 30 Amp Pink Front Wiper 30 Amp Pink Antilock Brakes/Stability Control Module/ Valves 20 Amp Blue...
Page 804 802 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 30 Amp Pink Vehicle System Interface Module #2 – If Equipped 30 Amp Pink Sunroof – If Equipped 30 Amp Pink Rear Defroster– If Equipped 30 Amp Pink Cummins Diesel Fuel Heater #2 If Equipped 30 Amp Pink Power Inverter 115V AC–...
Page 805 MAINTAINING YOUR VEHICLE 803 Cavity Cartridge Fuse Micro Fuse Description 5 Amp Tan Battery Sensor 20 Amp Yellow Trailer Tow – Left Turn/Stop Lights 20 Amp Yellow Adjustable Pedals 15 Amp Blue Additional Diesel Content – If Equipped 20 Amp Yellow Transmission 20 Amp Yellow Spare Fuse...
Page 806 804 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 10 Amp Red USB interface 10 Amp Red Sunroof / Passenger Window Switches / Rain Sensor 10 Amp Red CD / DVD / Bluetooth Hands-free Module – If Equipped 15 Amp Blue Mod SCR 12V (Cummins Diesel) –...
Page 807 MAINTAINING YOUR VEHICLE 805 Cavity Cartridge Fuse Micro Fuse Description 10 Amp Red Antilock Brakes/Electronic Stability Control 10 Amp Red Drivetrain Control Module/Front Axle Discon- nect Module 10 Amp Red Engine Control Module / Electric Power Steering 15 Amp Blue Clearance Lights 10 Amp Red Universal Garage Door Opener / Compass...
Page 808 806 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Micro Fuse Description 15 Amp Blue Instrument Panel Cluster F90/F91 20 Amp Yellow Power Outlet (Rear seats) Customer Selectable 20 Amp Yellow Cigar Lighter 10 Amp Red Shifter / Transfer Case Module 10 Amp Red Rear Camera / Park Assist 10 Amp Red Rear Seat Heater Switch...
Page 809: Vehicle Storage
MAINTAINING YOUR VEHICLE 807 VEHICLE STORAGE CAUTION! If you are storing your vehicle for more than 21 days, we • When installing the power distribution center recommend that you take the following steps to mini- cover, it is important to ensure the cover is properly mize the drain on your vehicle’s battery: positioned and fully latched.
Page 810: Replacement Bulbs
808 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Exterior Bulbs Bulb Number All of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. Base Quad Headlamp – H11LL Low Beam Interior Bulbs Base Quad Headlamp – 9005LL High Beam Bulb Number Front Turn Signal Lamp...
Page 811: Bulb Replacement
MAINTAINING YOUR VEHICLE 809 Bulb Number Bulb Number Fog Lamp (Horizontal 9145 Rear Lamp Bar ID shape) Marker Lamp Fog Lamp (Vertical 9006 Side Marker Lamps shape) (Dual Rear Wheels) Center High Mounted 921K Backup Lamp Stop Lamp (CHMSL) Rear License Plate Lamp Rear Cargo Lamp BULB REPLACEMENT LED Center High...
Page 812: Base Quad / Premium Bi-Halogen: Low Beam Headlamp, High Beam Headlamp, Front Park And Turn - If Equipped
810 MAINTAINING YOUR VEHICLE Base Quad / Premium Bi-Halogen: Low Beam Headlamp, High Beam Headlamp, Front Park And Turn — If Equipped 1. Open the hood. 2. Disconnect and isolate the negative battery cable. 3. Remove the six plastic push-in fasteners that secure the upper radiator seal to the grille support and both fender ledges.
Page 813 MAINTAINING YOUR VEHICLE 811 8. Reach through the access hole of the wheel house 10. Disconnect the wiring harness connectors from the splash shield and lift the slide lock upward far enough bulb socket. to disengage it from the lock post on the back of the 11.
Page 814: Fog Lamps - If Equipped
812 MAINTAINING YOUR VEHICLE Fog Lamps — If Equipped Rear Tail/Stop, Turn Signal And Backup Lamps 1. Reach under and behind the front bumper to access 1. Remove the two screws that pass through the bed the back of the front fog lamp housing. sheetmetal.
Page 815 MAINTAINING YOUR VEHICLE 813 2. Pull the outboard side of the lamp rearward far 3. Disconnect the wiring harness connectors from the enough to unsnap the two receptacles on the outboard bulb socket. side of the lamp housing from the two plastic snap 4.
Page 816: Center High-Mounted Stoplamp (Chmsl) With Cargo Lamp
814 MAINTAINING YOUR VEHICLE 2. Separate the connector holding the housing and wir- Center High-Mounted Stoplamp (CHMSL) With ing harness to the body. Cargo Lamp 1. Remove the two screws holding the housing/lens to the body as shown. CHMSL Connector Location CHMSL Mounting Screw Locations...
Page 817 MAINTAINING YOUR VEHICLE 815 3. Turn the desired bulb socket ¼ turn and remove the CAUTION! socket and bulb from housing. Do not contaminate the bulb glass by touching it 4. Pull the desired bulb straight from the socket. with your fingers or by allowing it to contact other oily surfaces.
Page 818: Cab Top Clearance Lamps - If Equipped
816 MAINTAINING YOUR VEHICLE 2. Rotate the bulb socket ¼ turn and pull it from the lamp Cab Top Clearance Lamps — If Equipped assembly. 1. Remove the two screws from the top of the lamp. Removing Bulb Socket From Clearance Lamp Removing Rear Screw From Clearance Lamp...
Page 819: Rear Lamp Bar Id Marker (Dual Rear Wheels) - If Equipped
MAINTAINING YOUR VEHICLE 817 3. Pull the bulb straight from it’s socket and replace. Screw Locations 2. Turn the socket ¼ turn counterclockwise to access the Removing The Bulb From The Bulb Socket bulb. Rear Lamp Bar ID Marker (Dual Rear Wheels) — If Equipped 3.
Page 820: Side Marker Lamps (Dual Rear Wheels) - If Equipped
818 MAINTAINING YOUR VEHICLE 1. Push rearward on the side marker lamp assembly. Side Marker Lamps (Dual Rear Wheels) — If Equipped 2. Pull the entire assembly from the fender. 3. Turn the socket ¼ turn counterclockwise and remove from assembly to access the bulb. 4.
Page 821 MAINTAINING YOUR VEHICLE 819 FLUID CAPACITIES U.S. Metric Fuel (Approximate) 1500 Regular Cab Shortbed/Crew Quad Cab Models 26 Gallons 98 Liters 1500 Regular Cab Longbed/Crew Quad Cab Models (Optional) 32 Gallons 121 Liters 2500/3500 Shortbed Models 31 Gallons 117 Liters 2500/3500 Longbed Models 32 Gallons 121 Liters...
Page 822 820 MAINTAINING YOUR VEHICLE U.S. Metric Cooling System 3.6L Engine (We recommend you use MOPAR® Antifreeze/ 13.7 Quarts 13 Liters Coolant 10 Year/150,000 Mile Formula that meets the require- ments of Chrysler Material Standard MS-12106.) 5.7L Engine – 1500 Models (We recommend you use MOPAR® 18.3 Quarts 17.3 Liters Antifreeze/Coolant 10 Year/150,000 Mile Formula that meets the...
Page 823 MAINTAINING YOUR VEHICLE 821 FLUIDS, LUBRICANTS AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology). Engine Oil – 3.6L Engine We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of Chrysler Material Standard MS-6395 such as MOPAR®, Pennzoil®, and Shell Helix®.
Page 824 822 MAINTAINING YOUR VEHICLE Component Fluid, Lubricant, or Genuine Part Engine Oil – 5.7L Engine 2500/3500 We recommend you use API Certified SAE 5W-30 Engine Oil, meeting trucks operating under a gross com- the requirements of Chrysler Material Standard MS-6395 such as bined weight rating greater than 14,000 MOPAR®, Pennzoil®, Shell Helix®...
Page 825 MAINTAINING YOUR VEHICLE 823 CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 826 824 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission – Eight-Speed Automatic Use only MOPAR® ZF 8&9 Speed ATF™ Automatic Transmission Fluid, or equivalent. Failure to use the correct fluid may affect the function or performance of your transmission.
Page 827 MAINTAINING YOUR VEHICLE 825 Component Fluid, Lubricant, or Genuine Part Rear Axle – 1500 Models We recommend you use MOPAR® Synthetic Gear Lu- bricant SAE 75W-140 (MS-8985). Limited-Slip Rear Ax- les require the addition of 5 oz. (148 ml) MOPAR® Limited Slip Additive (MS-10111).
Page 829: Maintenance Schedules
MAINTENANCE SCHEDULES CONTENTS MAINTENANCE SCHEDULE ... . .828 ▫ Maintenance Chart ....831...
Page 830 828 MAINTENANCE SCHEDULES change oil message to illuminate as early as 3,500 miles MAINTENANCE SCHEDULE (5,600 km) since last reset. Have your vehicle serviced as Your vehicle is equipped with an automatic oil change soon as possible, within the next 500 miles (805 km). indicator system.
Page 831 MAINTENANCE SCHEDULES 829 NOTE: 1500 Models Only Once A Month Or Before A Long Trip: • Under no circumstances should oil change intervals • Check engine oil level exceed 10,000 miles (16,000 km) or twelve months on • Check windshield washer fluid level 1500 trucks, whichever comes first.
Page 832 830 MAINTENANCE SCHEDULES Required Maintenance At Every Oil Change Interval As Indicated By Oil Change Indicator System: Refer to the Maintenance Schedules on the following pages for required maintenance. • Inspect engine cooling system protection and hoses. At Every Oil Change Interval As Indicated By Oil •...
Page 833 MAINTENANCE SCHEDULES 831 Maintenance Chart Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 834 832 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the brake linings, replace as necessary. Adjust parking brake as necessary. Inspect transfer case fluid. Additional Maintenance Replace engine air filter. Replace spark plugs (3.6L engine).** Replace spark plugs (5.7L engine).** Replace spark plugs...
Page 835 MAINTENANCE SCHEDULES 833 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first. Change automatic transmission fluid and filter(s) (six-speed auto- matic only), if using your vehicle for police, taxi, fleet, or frequent trailer towing.
Page 836 834 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the transfer case fluid, change for any of the following: police, taxi, fleet, or frequent trailer towing. Change the transfer case fluid. Inspect and replace PCV valve if necessary.
Page 837 MAINTENANCE SCHEDULES 835 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 839: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS SUGGESTIONS FOR OBTAINING SERVICE FOR ▫ Customer Assistance For The Hearing Or Speech YOUR VEHICLE ..... . .839 Impaired (TDD/TTY).
Page 840 838 IF YOU NEED CONSUMER ASSISTANCE DEPARTMENT OF TRANSPORTATION UNIFORM ▫ Traction Grades ..... . .845 TIRE QUALITY GRADES ....845 ▫...
Page 841: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 839 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 842: Chrysler Group Llc Customer Center
840 IF YOU NEED CONSUMER ASSISTANCE facilities, factory-trained technicians, special tools, and • Authorized dealer name the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized dealer service manager first.
Page 843: In Mexico Contact
IF YOU NEED CONSUMER ASSISTANCE 841 Canadian residents with hearing difficulties that require In Mexico Contact: assistance can use the special needs relay service offered Av. Prolongacion Paseo de la Reforma, 1240 by Bell Canada. For TTY teletypewriter users, dial 711 Sante Fe C.P.
Page 844: Warranty Information
842 IF YOU NEED CONSUMER ASSISTANCE The manufacturer will not stand behind any service WARNING! contract that is not the manufacturer’s service contract. It is not responsible for any service contract other than the Engine exhaust (internal combustion engines only), manufacturer’s service contract.
Page 845: Mopar® Parts
IF YOU NEED CONSUMER ASSISTANCE 843 campaign. However, NHTSA cannot become involved in MOPAR® PARTS individual problems between you, your authorized MOPAR® fluids, lubricants, parts, and accessories are dealer, and the manufacturer. available from an authorized dealer. They are recom- mended for your vehicle in order to help keep the vehicle To contact NHTSA, you may either call the Auto Safety operating at its best.
Page 846: Publication Order Forms
844 IF YOU NEED CONSUMER ASSISTANCE Diagnostic Procedure Manuals PUBLICATION ORDER FORMS To order the following manuals, you may use either the Diagnostic Procedure Manuals are filled with diagrams, website or the phone numbers listed below. Visa, Mas- charts and detailed illustrations. These practical manuals tercard, American Express, and Discover orders are ac- make it easy for students and technicians to find and fix cepted.
Page 847 IF YOU NEED CONSUMER ASSISTANCE 845 Call toll free at: Treadwear The Treadwear grade is a comparative rating, based on • 1–800–890–4038 (U.S.) the wear rate of the tire when tested under controlled • 1–800–387–1143 (Canada) conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded Visit us on the Worldwide Web at:...
Page 848 846 IF YOU NEED CONSUMER ASSISTANCE Vehicle Safety Standard No. 109. Grades B and A repre- WARNING! sent higher levels of performance on the laboratory test wheel, than the minimum required by law. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not WARNING! include acceleration, cornering, hydroplaning, or...
Page 849 INDEX...
Page 850 848 INDEX Adding Engine Coolant (Antifreeze) ... .776 Air Cleaner, Engine (Engine Air Cleaner Filter) ..759 Adding Fuel ......643 Air Conditioner Maintenance .
Page 851 INDEX 849 Ashtray ....... .232 Battery ....... . .764 Auto Down Power Windows .
Page 852 850 INDEX Cab Top Clearance Lights ....816 Child Restraint ......83 Camera, Rear .
Page 853 INDEX 851 Automatic ......410 Cupholders ......234 Cold Weather Operation .
Page 854 852 INDEX Remote .......37 Electronic Range Select (ERS) ....468 Remote Keyless Entry (RKE) .
Page 855 INDEX 853 Break-In Recommendations ....113 Exhaust Gas Caution ..... . .115 Compartment .
Page 856 854 INDEX Flooded Engine Starting ....451 Filler Cap (Gas Cap) .....645 Fluid, Brake .
Page 857 INDEX 855 Gear Ranges ......471 Passing ......177 Gear Select Lever Override .
Page 858 856 INDEX Illuminated Entry ......23 Key Fob Immobilizer (Sentry Key) ....18 Programming Additional Key Fobs .
Page 859 INDEX 857 Lead Free Gasoline ......634 Electronic Stability Program (ESP) Indicator ..591 Leaks, Fluid ......118 Exterior .
Page 860 858 INDEX Tire Pressure Monitoring (TPMS) ... .294 Maintenance Schedule ..... .828 Traction Control .
Page 861 INDEX 859 Multi-Function Control Lever ....176 Viscosity ......757 Oil Filter, Selection .
Page 862 860 INDEX Personal Settings......324 Programmable Electronic Features ... . .324 Pets .
Page 863 INDEX 861 Shifting out of Transfer Case Neutral (N) ..679 Reporting Safety Defects ....843 Reformulated Gasoline .....635 Restraint, Head.
Page 864 862 INDEX Seat Belt Pretensioner .....62 Folding Floor ......247 Seat Belt Reminder .
Page 865 INDEX 863 Transfer Case, Shifting into Transfer Case Cold Weather ......451 Neutral (N) ......676 Engine Fails to Start .
Page 866 864 INDEX System, Remote Starting .....34 Load Capacity ......603 Pressure Monitor System (TPMS) .
Page 867 INDEX 865 Disabled Vehicle ......740 Fluid ....... .824 Guide .
Page 868 866 INDEX Passive Entry Programming ....42 Warning Lights (Instrument Cluster Description) . . .289 Uconnect® Settings ..... .364 Warnings and Cautions.
Page 869 INDEX 867 Rear Sliding ......247 Windshield Wiper Blades ....767 Reset Auto-Up .
Page 870 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 871 Chrysler Group LLC 15D241-126-AA First Edition Printed in U.S.A. 15D241-126-AB Second Edition Printed in U.S.A.

This manual is also suitable for:

2015 2500 2015 35001500 20152500 20153500 2015

RAM 2015 1500 Owner's Manual

Table of Contents

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for RAM 2015 1500

Summary of Contents for RAM 2015 1500