Chapters
Table of Contents
Troubleshooting
Related Manuals for JVC 0205NYMCREBET
Summary of Contents for JVC 0205NYMCREBET
- Page 1 COMPACT COMPONENT SYSTEM MX-KC4 Consists of CA-MXKC4 and SP-MXKC4 STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL SP-MXKC4 CA-MXKC4 INSTRUCTIONS SP-MXKC4 LVT1343-006A...
- Page 2 Caution — STANDBY/ON button! Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY lamp lights red. •...
-
Page 3: Features
❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music. • With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or CD Player with a single touch. -
Page 4: Table Of Contents
Table of Contents Introduction ...1 Features... 1 How This Manual Is Organized... 1 IMPORTANT CAUTIONS... 1 Table of Contents ...2 Getting Started ...3 Accessories ... 3 How To Put Batteries In the Remote Control... 3 Using the Remote Control ... 3 Connecting the FM Antenna... -
Page 5: Getting Started
Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately. How To Put Batteries In the Remote Control Match the polarity (+ and –) on the batteries with the + and –... -
Page 6: Connecting The Fm Antenna
CAUTION: • Make all connections before plugging the System into an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna Using an FM 75-Ohm Antenna Cable (not Supplied) If reception is poor, connect the outside antenna. • Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied FM Wire Antenna. -
Page 7: Connecting The Am Antenna
Getting Started Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenna, keep the indoor AM loop connected. CAUTION: • To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord. Connecting the Speakers Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. -
Page 8: Connecting External Equipment
COMPU Play JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. -
Page 9: Basic Operations
Basic Operations STANDBY/ON SLEEP Numeric keys FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE SOUND FADE MODE MUTING RHYTHM AX RHYTHM REMOTE CONTROL * When the System is in use, the display shows other items as well. Turning the Power On and Off Turning the System On Press the... -
Page 10: Fade-Out Muting (Fade Muting)
Fade-out Muting (FADE MUTING) You can mute the output with one touch operation. To muting the output, press the FADE MUTING button on the Remote Control. The output is faded out. To release muting, press the FADE MUTING button once again. -
Page 11: Using The Tuner
Using the Tuner STANDBY/ON SLEEP Numeric keys FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. -
Page 12: Presetting Stations
• In AM broadcast, reception sensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna for best reception. Presetting Stations You can preset up to 30 FM stations and up to 15 AM stations. • Preset numbers may have been set to factory test fre- quencies prior to shipment. -
Page 13: Using The Cd Player
Using the CD Player STANDBY/ON Numeric keys SLEEP FM /AM FM MODE CD1-CD3 REPEAT PROGRAM /RANDOM TAPE TAPE REPEAT PROGRAM SOUND VOLUME MODE /RANDOM FADE RHYTHM AX MUTING REMOTE CONTROL This unit has been designed to playback the following CDs: •... -
Page 14: To Load Cds
About Disc Indicator: Disc Rotation indicator The Disc indicator consists of the following three kinds of indica- tors: Disc Number indicator: Lights all the time. Selected Disc indicator:Lights for the currently selected disc number. Disc Rotation indicator:Runs when the selected CD is playing or paused. -
Page 15: Basics Of Using The Cd Player-Normal Play
Using the CD Player Basics of Using the CD Player- Normal Play To Play CDs Load CDs. Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of the selected CD begins playing. -
Page 16: Programming The Playing Order Of The Tracks
Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. ❏ You can program up to 32 tracks in any desired order including the same tracks. -
Page 17: Random Play
Using the CD Player Random Play The tracks of the selected CD will play in no special order when you use this mode. In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RNDM” and “1 DISC” indicator. -
Page 18: Using The Cassette Deck (Listening To A Tape)
Using the Cassette Deck (Listening to a Tape) STANDBY/ON SLEEP FM /AM FM MODE ¢ REPEAT PROGRAM /RANDOM TAPE TAPE TAPE B 3 TAPE A 3 SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. The Cassette Deck allows you to play, record, and dub audio tapes. -
Page 19: Using The Cassette Deck (Recording)
Using the Cassette Deck (Recording) STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE TAPE A 3 TAPE B 3 SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL * When the System is in use, the display shows other items as well. Recording onto a cassette from any of the sound sources is simple. -
Page 20: Standard Recording
Standard Recording This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below;... -
Page 21: Using An External Equipment
Using an External Equipment STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL Listening to the External Equipment You can listen to the external equipment such as portable CD, MD player, STB, or other auxiliary. -
Page 22: Using The Timers
Using the Timers STANDBY/ON SLEEP SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL REC (Recording) Timer indicator * When the System is in use, the display shows other items as well. Three types of timers are available: DAILY Timer Use this timer to set wake up everyday to music from any... -
Page 23: Setting The Daily Timer
Using the Timers Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect. You can set the Daily Timer whether the System is turned on or off. -
Page 24: Setting The Rec (Recording) Timer
Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the ¢ or 4 button to select the preset station number, then press the SET button. - Page 25 Using the Timers Using the Unit You can set the time in the same way as for setting the Daily Tim- Insert a blank or erasable tape into the Deck B and wind past the tape leader. Press the CLOCK/TIMER button until “ON TIME”...
-
Page 26: Setting The Sleep Timer
Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by it- self rather than play all night. -
Page 27: Care And Maintenance
Care And Maintenance Handle your CDs and tapes carefully, and they will last a long time. Compact Discs • Remove the CD from its case by holding it at the edges while pressing the case’s center hole lightly. • Do not touch the shiny surface of the CD, or bend the CD. -
Page 28: Troubleshooting
Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. - Page 29 0205NYMCREBET © 2005 Victor Company of Japan, Limited...
- Page 30 COMPACT COMPONENT SYSTEM SISTEMAS DE COMPONENTES COMPACTOS SISTEMA DE COMPONENTES COMPACTOS MX-KC4 Consists of CA-MXKC4 and SP-MXKC4 Consiste de CA-MXKC4, y SP-MXKC4 Consiste em CA-MXKC4, e SP-MXKC4 STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX...
- Page 31 Advertências, precauções e outras notas CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. PRECAUCIÓN Para reducir riesgos de choques eléctricos, incendio, etc.: 1.
- Page 32 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below. 3 Bottom: Place on the level surface.
-
Page 33: Introduction
❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music. • With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or CD Player with a single touch. -
Page 34: Table Of Contents
Table of Contents Introduction ...1 Features... 1 How This Manual Is Organized... 1 IMPORTANT CAUTIONS... 1 Table of Contents ...2 Getting Started ...3 Accessories ... 3 Set the VOLTAGE SELECTOR Switch ... 3 How To Put Batteries In the Remote Control... 3 Using the Remote Control ... -
Page 35: Getting Started
Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) AC Plug Adaptor (1) If any of these items are missing, contact your dealer immediately. Set the VOLTAGE SELECTOR Switch To avoid damaging the System, set the voltage before plugging in the System. -
Page 36: Using The Remote Control
Using the Remote Control The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away. You need to point the Remote Control at the remote sensor on the System’s front panel. Remote sensor CAUTION: •... -
Page 37: Connecting The Am Antenna
Getting Started Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenna, keep the indoor AM loop connected. CAUTION: • To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord. Connecting the Speakers Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. -
Page 38: Connecting External Equipment
COMPU Play JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. -
Page 39: Basic Operations
Basic Operations STANDBY/ON SLEEP Numeric keys FM /AM FM MODE STANDBY indicator REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE SOUND FADE MODE RHYTHM AX MUTING RHYTHM REMOTE CONTROL * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. -
Page 40: Fade-Out Muting (Fade Muting)
Fade-out Muting (FADE MUTING) You can mute the output with one touch operation. To muting the output, press the FADE MUTING button on the Remote Control. The output is faded out. To release muting, press the FADE MUTING button once again. -
Page 41: Using The Tuner
Using the Tuner STANDBY/ON SLEEP Numeric keys FM /AM FM MODE FM/AM FM MODE Á REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. -
Page 42: Presetting Stations
Select a station using one of the following methods. • Manual Tuning Briefly press the 22 or Á button to move from frequency to frequency until you find the station you want. • Auto Tuning If you hold down the 22 or Á button for 1 second or more and then release it, the frequency changes down, or up, automatically until a station is found. -
Page 43: Using The Cd Player
Using the CD Player STANDBY/ON Numeric keys SLEEP FM /AM FM MODE ¢ CD1-CD3 CD 6 REPEAT PROGRAM /RANDOM TAPE TAPE REPEAT PROGRAM SOUND VOLUME MODE /RANDOM FADE MUTING RHYTHM AX REMOTE CONTROL This unit has been designed to playback the following CDs: •... -
Page 44: To Load Cds
About Disc Indicator: Disc Rotation indicator The Disc indicator consists of the following three kinds of indica- tors: Disc Number indicator: Lights all the time. Selected Disc indicator:Lights for the currently selected disc number. Disc Rotation indicator:Runs when the selected CD is playing or paused. -
Page 45: Basics Of Using The Cd Player-Normal Play
Using the CD Player Basics of Using the CD Player- Normal Play To Play CDs Load CDs. Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of the selected CD begins playing. -
Page 46: Programming The Playing Order Of The Tracks
Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. ❏ You can program up to 32 tracks in any desired order including the same tracks. -
Page 47: Random Play
Using the CD Player Random Play The tracks of the selected CD will play in no special order when you use this mode. In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RNDM” and “1 DISC” indicator. -
Page 48: Using The Cassette Deck (Listening To A Tape)
Using the Cassette Deck (Listening to a Tape) STANDBY/ON SLEEP FM /AM FM MODE ¢ REPEAT PROGRAM /RANDOM TAPE TAPE TAPE B 3 TAPE A 3 SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. -
Page 49: Using The Cassette Deck (Recording)
Using the Cassette Deck (Recording) STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE TAPE A 3 TAPE B 3 SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. -
Page 50: Standard Recording
Standard Recording This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below;... -
Page 51: Using An External Equipment
Using an External Equipment STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL Listening to the External Equipment You can listen to the external equipment such as portable CD, MD player, STB, or other auxiliary. -
Page 52: Using The Timers
Using the Timers STANDBY/ON SLEEP SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL REC (Recording) Timer indicator * When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section. -
Page 53: Setting The Daily Timer
Using the Timers Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect. You can set the Daily Timer whether the System is turned on or off. -
Page 54: Setting The Rec (Recording) Timer
Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the ¢ or 4 button to select the preset station number, then press the SET button. - Page 55 Using the Timers Using the Unit You can set the time in the same way as for setting the Daily Tim- Insert a blank or erasable tape into the Deck B and wind past the tape leader. Press the CLOCK/TIMER button until “ON TIME”...
-
Page 56: Setting The Sleep Timer
Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by it- self rather than play all night. -
Page 57: Care And Maintenance
Care And Maintenance Handle your CDs and tapes carefully, and they will last a long time. Compact Discs • Remove the CD from its case by holding it at the edges while pressing the case’s center hole lightly. • Do not touch the shiny surface of the CD, or bend the CD. -
Page 58: Troubleshooting
Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. - Page 59 EN, SP, PR © 2005 Vicotr Company of Japan, Limited Para el residente de Mexico IMPORTADOR : JVC DE MEXICO, S.A. DE C.V. AV. INSURGENTES SUR No.670 8º PISO COL. DEL VALLE, MEXICO, D.F. C.P.03100 Tel. 55 36 82 52 Fax.
- Page 60 COMPACT COMPONENT SYSTEM MX-KC4 Consists of CA-MXKC4 and SP-MXKC4 STANDBY/ON SLEEP FM MODE FM /AM REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL SP-MXKC4 CA-MXKC4 INSTRUCTIONS SP-MXKC4 LVT1343-003B [UJ]...
-
Page 61: Important For Laser Products
CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit;... - Page 62 ❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music. • With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or CD Player with a single touch.
- Page 63 Table of Contents Introduction ...1 Features... 1 How This Manual Is Organized... 1 IMPORTANT CAUTIONS... 1 Table of Contents ...2 Getting Started ...3 Accessories ... 3 Set the VOLTAGE SELECTOR Switch ... 3 How To Put Batteries In the Remote Control... 3 Using the Remote Control ...
-
Page 64: Getting Started
Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) AC Plug Adaptor (1) If any of these items are missing, contact your dealer immediately. Set the VOLTAGE SELECTOR Switch To avoid damaging the System, set the voltage before plugging in the System. -
Page 65: Using The Remote Control
Using the Remote Control The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away. You need to point the Remote Control at the remote sensor on the System’s front panel. Remote sensor CAUTION: •... -
Page 66: Connecting The Am Antenna
Getting Started Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenna, keep the indoor AM loop connected. CAUTION: • To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord. Connecting the Speakers Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. -
Page 67: Connecting External Equipment
COMPU Play JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch. With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button for that function. -
Page 68: Basic Operations
Basic Operations STANDBY/ON SLEEP Numeric keys FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE SOUND FADE MODE MUTING RHYTHM AX RHYTHM REMOTE CONTROL * When the System is in use, the display shows other items as well. Turning the Power On and Off Turning the System On Press the... -
Page 69: Fade-Out Muting (Fade Muting)
Fade-out Muting (FADE MUTING) You can mute the output with one touch operation. To muting the output, press the FADE MUTING button on the Remote Control. The output is faded out. To release muting, press the FADE MUTING button once again. -
Page 70: Using The Tuner
Using the Tuner STANDBY/ON SLEEP Numeric keys FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL * When the System is in use, the display shows other items as well. You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. -
Page 71: Presetting Stations
Select a station using one of the following methods. • Manual Tuning Briefly press the 22 or Á button to move from frequency to frequency until you find the station you want. • Auto Tuning If you hold down the 22 or Á button for 1 second or more and then release it, the frequency changes down, or up, automatically until a station is found. -
Page 72: Using The Cd Player
Using the CD Player STANDBY/ON Numeric keys SLEEP FM /AM FM MODE CD1-CD3 REPEAT PROGRAM /RANDOM TAPE TAPE REPEAT PROGRAM SOUND VOLUME MODE /RANDOM FADE MUTING RHYTHM AX REMOTE CONTROL This unit has been designed to playback the following CDs: •... -
Page 73: To Load Cds
About Disc Indicator: Disc Rotation indicator The Disc indicator consists of the following three kinds of indica- tors: Disc Number indicator: Lights all the time. Selected Disc indicator:Lights for the currently selected disc number. Disc Rotation indicator:Runs when the selected CD is playing or paused. -
Page 74: Basics Of Using The Cd Player-Normal Play
Using the CD Player Basics of Using the CD Player- Normal Play To Play CDs Load CDs. Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of the selected CD begins playing. -
Page 75: Programming The Playing Order Of The Tracks
Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. ❏ You can program up to 32 tracks in any desired order including the same tracks. -
Page 76: Random Play
Using the CD Player Random Play The tracks of the selected CD will play in no special order when you use this mode. In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RNDM” and “1 DISC” indicator. -
Page 77: Using The Cassette Deck (Listening To A Tape)
Using the Cassette Deck (Listening to a Tape) STANDBY/ON SLEEP FM /AM FM MODE ¢ REPEAT PROGRAM /RANDOM TAPE TAPE TAPE B 3 TAPE A 3 SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. The Cassette Deck allows you to play, record, and dub audio tapes. -
Page 78: Using The Cassette Deck (Recording)
Using the Cassette Deck (Recording) STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE TAPE A 3 TAPE B 3 SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL * When the System is in use, the display shows other items as well. Recording onto a cassette from any of the sound sources is simple. -
Page 79: Standard Recording
Standard Recording This is the basic method for recording any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects. However, when you need to add a selection to a tape you have made, or are combining selections from several sources on one tape, use the method described below;... -
Page 80: Using An External Equipment
Using an External Equipment STANDBY/ON SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE RHYTHM AX MUTING REMOTE CONTROL Listening to the External Equipment You can listen to the external equipment such as portable CD, MD player, STB, or other auxiliary. -
Page 81: Using The Timers
Using the Timers STANDBY/ON SLEEP SLEEP FM /AM FM MODE REPEAT PROGRAM /RANDOM TAPE TAPE SOUND VOLUME MODE FADE MUTING RHYTHM AX REMOTE CONTROL REC (Recording) Timer indicator * When the System is in use, the display shows other items as well. Three types of timers are available: DAILY Timer Use this timer to set wake up everyday to music from any... -
Page 82: Setting The Daily Timer
Using the Timers Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect. You can set the Daily Timer whether the System is turned on or off. -
Page 83: Setting The Rec (Recording) Timer
Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the ¢ or 4 button to select the preset station number, then press the SET button. - Page 84 Using the Timers Using the Unit You can set the time in the same way as for setting the Daily Tim- Insert a blank or erasable tape into the Deck B and wind past the tape leader. Press the CLOCK/TIMER button until “ON TIME”...
-
Page 85: Setting The Sleep Timer
Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by it- self rather than play all night. -
Page 86: Care And Maintenance
Care And Maintenance Handle your CDs and tapes carefully, and they will last a long time. Compact Discs • Remove the CD from its case by holding it at the edges while pressing the case’s center hole lightly. • Do not touch the shiny surface of the CD, or bend the CD. -
Page 87: Troubleshooting
Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service. - Page 88 © 2005 Vicotr Company of Japan, Limited 0205NYMCREBET...