Page 1 42LD420 42LD520 42LD450C 37LD452C 26LE5300 42LE5300 55LE7300 47LD420 47LD520 47LD450C 42LD452C 22LE5500 47LE5300 42LE530C 32LD450 55LD520 55LD520C 47LD452C 26LE5500 55LE5300 47LE530C 37LD450 42LD630 42LD451C 32LD452B 55LE530C 42LD450 47LD630 47LD451C 37LD452B 47LD450 55LD630 26LD352C 42LD452B 47LD452B www.lg.com P/NO : SAC34134204 (1111-REV16)
Page 2: Warning / Caution
Do not attempt to modify this product in any point of the cable entry as practical. way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Refer all servicing to qualified service per- Read these instructions. sonnel. Servicing is required when the appa- Keep these instructions. ratus has been damaged in any way, such as power-supply cord or plug is damaged, Heed all warnings.
Page 4 SAFETY INSTRUCTIONS ANTENNAS WARNING - To reduce the risk of Outdoor antenna grounding fire or electrical shock, do not If an outdoor antenna is installed, follow the expose this product to rain, precautions below. An outdoor antenna sys- moisture or other liquids. Do not tem should not be located in the vicinity of touch the TV with wet hands.
Page 5 Dot Defect ON DISPOSAL The Plasma or LCD panel is a high technol- (Only Hg lamp used LCD TV) ogy product with resolution of two million to The fluorescent lamp used in this product con- six million pixels. In a very few cases, you tains a small amount of mercury.
Page 6: Table Of Contents
CONTENTS WARNING / CAUTION - Picture Test / Sound Test ......60 ....... 2 - Product/Service Info........61 SAFETY INSTRUCTIONS Simple Manual ............62 Important Safety Instructions ......3 Channel Setup - Auto Scan (Auto Tuning) ......63 FEATURE OF THIS TV ........
Page 7 SOUND & LANGUAGE CONTROL APPENDIX Auto Volume ............113 Troubleshooting ..........142 Clear Voice II ............114 Maintenance ............145 Balance ..............115 Product Specifications ........146 Preset Sound Settings (Sound Mode) ..116 IR Code ..............151 Sound Setting Adjustment - User Mode ...117 External Control through RS-232C ...
Page 8: Feature Of This Tv
To obtain your registration code, locate Unlike other sensors which can only the DivX VOD section in your device sense brightness of ambient light, LG’s setup menu. Go to vod.divx.com for “Intelligent Sensor” uses 4,096 sens- more information on how to complete ing steps to evaluate its surroundings.
Page 9: Preparation
PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please con- tact the dealer where you purchased the TV. The accessories included may differ from the images below. (For 32/37/42/47LD452B) 1.5V 1.5V Owner’s Manual CD Manual EzSign TV Editor...
Page 10 PREPARATION 32/42/47LD420, 32/42/47/55LD520, 55LD520C (For 55LD520C, (Except 47LD420, 55LD520) (For 55LD520C) 47/55LD520, 55LD520C) (M4 x 14) (M4 x 24) Screws for stand assembly Torx plus Star head screw Screw for stand fixing (Refer to P.26) (Refer to P.33) (Refer to P.26) (For 55LD520C) Protection Cover Protective Bracket and Screw...
Page 11: Front Panel Information
FRONT PANEL INFORMATION Image shown may differ from your TV. NOTE In case of some model, the thin film on screen is a part of TV, So don’t take it off. 19/22/26/32/37/42/47/55LE5300, 19/22/26LE5300, 22/26LE5500 22/26LE5500, 42/47/55LE530C Remote Control Sensor Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu.
Page 12 PREPARATION Image shown may differ from your TV. 32/37/42/47LD450, 37/42/47LD450C, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B CHANNEL ( , ) Buttons VOLUME (+, -) SPEAKER Buttons ENTER ENTER Button MENU MENU Button INPUT Remote Control Sensor INPUT Button Power/Standby Indicator POWER Button (Can be adjusted using the Power Indicator in the OPTION menu.
Page 13 42/47/55LD630 CHANNEL ( , ) Buttons VOLUME (+, -) Buttons ENTER ENTER Button MENU MENU Button INPUT INPUT Button SPEAKER POWER Button Power/Standby Indicator (Can be adjusted using the Power Indicator in the OPTION menu. p.111 Remote Control Sensor Intelligent Sensor Adjusts picture according to the surrounding conditions.
Page 14 PREPARATION Image shown may differ from your TV. 32/42/47LD420 CHANNEL ( , ) Buttons VOLUME (+, -) Buttons SPEAKER ENTER Button ENTER Remote Control Sensor Power/Standby Indicator MENU Button MENU (Can be adjusted using the Power Indicator INPUT Button INPUT in the OPTION menu.
Page 15 42/47/55LE7300 CHANNEL ( , ) Buttons VOLUME (+, -) Buttons ENTER Button Power/Standby Indicator ENTER (Can be adjusted using the Power Indicator in the OPTION MENU Button MENU menu. p.111 INPUT Button INPUT POWER Button Remote Control Sensor NOTE Do not step on the glass stand or subject it Intelligent Sensor to any impact.It may break, causing possible Adjusts picture according to...
Page 16: Back Panel Information
PREPARATION BACK PANEL INFORMATION Image shown may differ from your TV. 19/22/26LE5300, 22/26LE5500, 19/22LE5300, 26LE5300, 22LE5500 26LE5500 RS-232C IN (DVI) (CONTROL&SERVICE) DC-IN OPTICAL AV IN AUDIO IN DIGITAL RGB/DVI AUDIO OUT VIDEO L(MONO) AUDIO RGB IN (PC) ANTENNA/ AUDIO VIDEO CABLE IN COMPONENT IN Power Connection...
Page 17 32/37/42/47/55LE5300, 42/47/55LE530C RS-232C IN OPTICAL (CONTROL & SERVICE) DIGITAL AUDIO OUT /DVI IN AV IN 1 RGB IN (PC) VIDEO L/MONO AUDIO COMPONENT IN 1 ANTENNA/ CABLE IN AUDIO IN (DVI) VIDEO AUDIO (RGB/DVI) CAUTION For HDMI IN 4 and USB IN For an optimal connection, HDMI cables and USB devices should have bezels...
Page 18 PREPARATION 32/42/47LD420, 32/37/42/47LD450, 42/47LD451C RS-232C IN OPTICAL (CONTROL & SERVICE) DIGITAL AUDIO OUT AV IN 1 RGB IN (PC) VIDEO L/MONO AUDIO ANTENNA/ AUDIO IN /DVI IN VIDEO AUDIO (RGB/DVI) CABLE IN COMPONENT IN AV IN 2 32/42/47/55LD520, 55LD520C, 42/47/55LD630 32/42/47/55LD520, 55LD520C 42/47/55LD630...
Page 19 This port is used for service or Hotel mode. For use with external speakers. AV (Audio/Video) IN Analog composite connection. Supports stan- Connect this to an LG remote jack pack sys- dard definition video only (480i). tem. ANTENNA/CABLE IN Connect over-the-air or cable signals to this...
Page 20: Stand Instructions
PREPARATION STAND INSTRUCTIONS (For 19/22LE5300, 22LE5500) Image shown may differ from your TV. INSTALLATION DETACHMENT Carefully place the TV screen side down Carefully place the TV screen side down on on a cushioned surface to protect the a cushioned surface to protect the screen screen from damage.
Page 21 STAND INSTRUCTIONS (For 42/47/55LE7300) Image shown may differ from your TV. INSTALLATION DETACHMENT Carefully place the TV screen side down Carefully place the TV screen side down on on a cushioned surface to protect the a cushioned surface to protect the screen screen from damage.
Page 22 PREPARATION STAND INSTRUCTIONS (For 26/32/37/42/47/55LE5300, 26LE5500, 42/47/55LE530C) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. STAND BODY Assemble the parts of the STAND BODY with the STAND BASE of the TV.
Page 23 DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws from the TV. Detach the STAND REAR COVER from TV. Detach the stand from TV.
Page 24 PREPARATION STAND INSTRUCTIONS (For 32/37/42/47LD450, 37/42/47LD450C, 42/47/55LD630, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND BODY STAND BODY with the STAND BASE of the TV.
Page 25 DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws from the TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.
Page 26 PREPARATION STAND INSTRUCTIONS (For 32/42/47LD420, 32/42/47/55LD520, 55LD520C) Image shown may differ from your TV. INSTALLATION Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. (For 55LD520C, 55LD520) Assemble the parts of the STAND BODY STAND BODY with the STAND BASE of the TV.
Page 27 Image shown may differ from your TV. DETACHMENT Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Remove the screws from the TV. Detach the stand from TV. PROTECTION COVER After removing the stand, install the included PROTECTION COVER over the hole for the stand.
Page 28: Vesa Wall Mounting
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer.
Page 29 Standard dimensions for wall mount kits are may damage the TV or cause the TV to a fall, shown in the table. leading to personal injury. LG is not liable for these kinds of accidents. When purchasing our wall mount kit, a detailed...
Page 30: Cable Management
PREPARATION CABLE MANAGEMENT Image shown may differ from your TV. 32/37/42/47LD450, 37/42/47LD450C, 32/42/47LD420, 32/42/47/55LD520, 55LD520C, 42/47/55LD630, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. For 37/42/47LD450C, 55LD520C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C: Secure the power cord with the PROTECTIVE BRACKET/SCREW on the TV back cover.
Page 31 19/22/26LE5300, 22/26LE5500 42/47/55LE7300 FOR DESK-TYPE STAND After connecting the cables as necessary, install the CABLE HOLDER as shown and bundle the cables. Install the CABLE MANAGEMENT CLIP as shown. CABLE HOLDER CABLE MANAGEMENT CLIP 32/37/42/47/55LE5300, 42/47/55LE530C Connect the cables as necessary. To connect additional equipment, see the Secure the power cord with the CABLE EXTERNAL EQUIPMENT SETUP section.
Page 32: Desktop Pedestal Installation
PREPARATION DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 10.1 cm (4 inch) on all four sides from the wall. 10.1 cm (4 inch) 10.1 cm (4 inch) 10.1 cm (4 inch) 10.1 cm (4 inch) CAUTION Ensure adequate ventilation by following the clearance recommendations.
Page 33: Attaching The Tv To A Desk
ATTACHING THE TV TO A DESK (For 32/42LD420, 32/37/42LD450, 37/42LD450C, 32/42LD520, 42LD630, 32LE5300, 42LD451C, 32/37/42LD452C, 32/37/42LD452B, 26LD352C) Image shown may differ from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, poten- tially causing injury or damaging the product.
Page 34: Securing The Tv To The Wall To Prevent Falling When The Tv Is Used On A Stand
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards.
Page 35: Antenna Or Cable Connection
To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections.
Page 36: External Equipment Setup
EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. IThis part of EXTERNAL EQUIPMENT SETUP mainly use picture of for 26LE5300/26LE5500. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device.
Page 37: Hdmi Connection
HDMI Connection 1. How to connect Connect the digital set-top box to HDMI/DVI IN RS-232C IN (DVI) 1, 2, 3*, or 4** jack on the TV. (CONTROL&SERVICE) DC-IN OPTICAL AV IN AUDIO IN DIGITAL RGB/DVI AUDIO OUT VIDEO L(MONO) AUDIO No separate audio connection is necessary.
Page 38: Dvi To Hdmi Connection
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect RS-232C IN (DVI) DC-IN (CONTROL&SERVICE) Connect the DVI output of the digital set-top OPTICAL box to the HDMI/DVI IN 1 or 2* jack on the TV. AV IN AUDIO IN DIGITAL RGB/DVI AUDIO OUT...
Page 39: Dvd Setup
DVD SETUP Component Connection 1. How to connect Connect the video outputs ( Y, P ) of the DVD to the COMPONENT IN VIDEO or 1/2* jacks on the TV. Match the jack colors ( Y = = red ) . green, P = blue, and P Connect the audio outputs of the DVD to the...
Page 40 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect RS-232C IN DVI) (CONTROL&SERVICE) Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, OPTICAL AV IN AUDIO IN DIGITAL Audio Left = white, and Audio Right = red) RGB/DVI AUDIO OUT VIDEO...
Page 41: Vcr Setup
VCR SETUP Antenna Connection 1. How to connect AUDIO Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE ANTENNA/ IN socket on the TV. ANT OUT S-VIDEO VIDEO AUDIO CABLE IN AUDIO ANT IN OUTPUT Connect the antenna cable to the RF SWITCH antenna in socket of the VCR.
Page 42: Other A/V Source Setup
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect Connect the AUDIO/VIDEO jacks between TV and external equipment. RS-232C IN (DVI) (CONTROL&SERVICE) DC-IN Match the jack colors. ( Video = yellow, Audio Left = white, and OPTICAL AV IN AUDIO IN DIGITAL RGB/DVI...
Page 43: Usb Connection
USB CONNECTION 1. How to connect Connect the USB device to the USB IN jack on the side of TV. 2. How to use After connecting the USB IN jack, you Memory Key use the USB function. ( p.78 HEADPHONE SETUP (Except 37/42/47LD450C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C) You can listen to the sound through the headphone.
Page 44: Audio Out Connection
EXTERNAL EQUIPMENT SETUP AUDIO OUT CONNECTION Send the TV’s audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). 1.
Page 45: Pc Setup
PC SETUP This TV provides Plug and Play capability, meaning that a PC adjusts automatically to the TV’s set- tings. RS 232C IN VGA (D-Sub 15 Pin) Connection (DVI) DC-IN (CONTROL&SERVICE) OPTICAL AV IN AUDIO IN 1. How to connect DIGITAL RGB/DVI AUDIO OUT...
Page 46 EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect Connect the DVI output of the PC to the HDMI/DVI IN 1 or 2* jack on the TV. RS-232C IN (DVI) DC-IN (CONTROL&SERVICE) Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
Page 47 NOTE To get the the best picture quality, adjust the PC graphics card to 1360 x 768 (19/22/26LE5300, 22/26LE5500, 32LD452C, 32LD452B, 26LD352C) or 1920 x 1080 (Other models). Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright- ness.
Page 48: Screen Setup For Pc Mode
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. You can choose this option only when the PC resolution is set to 1024X768, 1280X768 or 1360X768. Select PICTURE.
Page 49 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. If the position of the image is still not Select PICTURE.
Page 50: Adjustment For Screen Position, Size, And Phase
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment or if text is shaking, adjust the picture phase manually. This feature operates only in RGB-PC mode. Position: This function is to adjust MENU Select PICTURE.
Page 51 Screen Reset (Reset to original initial values) Returns Position, Size, and Phase to the default initial settings. This feature operates only in RGB-PC mode. Select PICTURE. MENU ENTER Select Screen (RGB-PC). ENTER Select Reset. ENTER Select Yes. ENTER Start Reset.
Page 52: Watching Tv / Channel Control
WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. The remote control may differ from the images below. POWER Turns the TV on from standby or off to standby.
Page 53 MENU Displays the main menu or clears all on-screen displays and return to TV viewing. GUIDE Shows Contents List in EzSign mode. (EzSign V1.5 or Later) (For 32/37/42/47LD452B) Displays the program event accord- ing to time scheduler. (Other mod- els) ENERGY AV MODE INPUT AV MODE INPUT...
Page 54: Turning On The Tv
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the I, INPUT, CH ( button on the TV or press , INPUT, CH ( Number (0-9)
Page 55: Initial Setting
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus.
Page 56 WATCHING TV / CHANNEL CONTROL Step 3. Power Indicator (For LED LCD TV) Select On or Off. ENTER This function is disable in “Step2. Mode Setting - Store Demo”. Step 4. Time Zone Select Time Zone option. Select Daylight Saving option.
Page 57: On-Screen Menus Selection
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. Display each menu. ENTER Accept the current selection. MENU ENTER Select a menu item. Return to TV viewing. EXIT For 37/42/47LD450C, 55LD520C, 42/4755LE530C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C...
Page 58 WATCHING TV / CHANNEL CONTROL i.e) Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520, 55LD520C, 42/47/55LE530C, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C For 32/37/42/47LD452B For 32/37/42/47LD452C...
Page 59: Quick Menu
QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. Aspect Ratio: Selects your desired picture format. Picture Mode: Selects the desired preset picture setting. Sound Mode: Selects the desired preset sound setting.
Page 60: Customer Support
WATCHING TV / CHANNEL CONTROL CUSTOMER SUPPORT Picture Test / Sound Test This function is a customer support function that can execute picture and sound tests. MENU Select Customer Support. ENTER Select Picture Test or Sound Test. Select Yes. ENTER Return to the previous menu.
Page 61: Product/Service Info
Product/Service Info. This function shows support and product information. Customer Service Center can differ by country. MENU Select Customer Support. Select Product/Service Info.. You can check the various ENTER product/Service infomation based on your model. Return to the previous menu. BACK RETURN Return to TV viewing.
Page 62: Simple Manual
WATCHING TV / CHANNEL CONTROL SIMPLE MANUAL (Except 32/37/42/47LD452C, 32/37/42/47LD452B) You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. MENU Select Simple Manual. GREEN Select the part of the manual you would like to see.
Page 63: Channel Setup
CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run this function if you change your residence or move the TV. Auto Tuning memorizes only the channels available at the time. MENU Select CHANNEL.
Page 64: Add/Delete Channel (Manual Tuning)
WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) When selecting DTV or Cable DTV input signal in Manual Tuning, you can view the on-screen signal strength monitor to see the quality of the signal being received. The TV will ask for a password if MENU Select CHANNEL.
Page 65: Channel Editing
Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH button during TV viewing.
Page 66: Favorite Channel Setup
WATCHING TV / CHANNEL CONTROL WATCHING TV / CHANNEL CONTROL FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. Select your desired channel. Select your desired favorite MARK channel group from A to D.
Page 67: Channel List
CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. Displaying Channel List Display the Channel List. LIST Tune to the “ CHANNEL menu - Channel BLUE Edit ”.
Page 68: Channel Information
WATCHING TV / CHANNEL CONTROL CHANNEL INFORMATION (Except 32/37/42/47LD452B) Displaying Channel Information Show the current channel program Information INFO on the screen. Show a previous or next channel’s program infor- mation Return to TV viewing. EXIT...
Page 69: Channel Brief Information
CHANNEL BRIEF INFORMATION (Except 32/37/42/47LD452B) Brief Info shows the present screen information. ENTER Shows the current channel’s brief info screen. ENTER Return to TV viewing. Program title Multilingual : The program contains two or more audio servic- Day, Month, Year, es.
Page 70: Input List
WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. i.e) Disconnected inputs are inactive (grayed out) INPUT Select the desired input source. ENTER When new external device is connected, this popup menu is displayed automatically.
Page 71: Input Label
INPUT LABEL This indicates which device is connected to which input port. ie) Change the input label using Blue button i.e) i.e) INPUT Select the desired input source. Select the label. BLUE Return to the previous menu. BACK RETURN Return to TV viewing. EXIT...
Page 72: Reset To Factory Default (Initial Setting)
WATCHING TV / CHANNEL CONTROL RESET TO FACTORY DEFAULT (INITIAL SETTING) This function resets the TV to factory default and erases all stored channels. MENU Select OPTION. When selecting “Lock System - On” in the LOCK menu, the message to enter the password appears.
Page 73: Mode Setting
MODE SETTING (Except 32/37/42/47LD452B) Default selection is “Home Use”. We recommend setting the TV to “Home Use” mode for the best picture in your home environment. For 37/42/47/55LE5300, 42/47/55LE7300, 42/47/55LE530C “Store Demo” Mode is only intended MENU Select OPTION. for use in retail environments. Customers can adjust the “Picture menu - Picture mode”...
Page 74: Demo Mode
WATCHING TV / CHANNEL CONTROL DEMO MODE (Except 32/37/42/47LD452B) Displays a slide show to explain the various feature of this TV. MENU Select OPTION. ENTER Select Mode Setting. ENTER Select Store Demo. Select On. ENTER Return to TV viewing. After a while, Demo Mode. starts. EXIT If you want to stop the demo, press any button (Except VOL +, - and MUTE button).
Page 75: Av Mode
AV MODE AV Mode toggles through preset Video and Audio settings. AV MODE Press the AV MODE button repeatedly to If you select “Cinema” in AV mode, select the desired source. Cinema will be selected both for “PICTURE menu - Picture Mode” and “AUDIO menu - Sound Mode”...
Page 76: Simplink
WATCHING TV / CHANNEL CONTROL SIMPLINK SIMPLINK allows you to control and play other AV devices connected with HDMI cable without addi- tional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported.
Page 77 SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device: Enables you to select one of the AV devices connected to the TV. Disc playback: Control connected AV devices by pressing the , ENTER, but- tons.
Page 78: My Media
MY MEDIA MY MEDIA CONNECTION METHOD USB Connection Connect the USB device to the USB IN jack on the side of TV. Memory Key Precautions when using the USB device Only a USB storage device is recognizable. Connecting a USB storage device through a USB hub is not supported. A USB storage device which uses its own driver may not be recognized.
Page 79: Entry Mode
ENTRY MODE The My Media menu will open automatically when you insert a USB drive. My Media can also be accessed by choosing My Media in the user menu. On USB device, you can not add a new folder or delete the existing folder. Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C,...
Page 80: Movie List
MY MEDIA MOVIE LIST (Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520, 55LD520C, 42/47/55LE530C, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C) The movie list is activated once a USB drive is detected. It is used when playing movie files on the TV. It displays all of the video files it recognizes. The On-Screen Display on your model may be slightly different.
Page 81: Supported Video Formats
Supported Video Formats File Video Decoder Audio Codec Max Resolution Extension name mpg, mpeg MPEG1, MPEG2 MP2, MP3, Dolby Digital, LPCM MPEG1 MP2, MP3, Dolby Digital, AAC, ts, trp, tp MPEG2, H.264, AVS, VC1 HE-AAC MPEG1, 2 MP2, MP3, Dolby Digital, LPCM MPEG4,DivX 3.11, DivX 4.12, DivX 5.x, mp4, mov DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02,...
Page 82 MY MEDIA Screen Components ENTER ENTER Select Movie List. MENU Select MY MEDIA. Moves to upper level folder Current page/Total pages Corresponding buttons on the remote control Contents under the folder focused on Current page/total pages of contents GREEN Move to Photo List or Music List. YELLOW Change Numbers: Changes the number or thumbnails displayed at a time.
Page 83 Movie Selection Select the target folder or drive. Select the desired ENTER movie title. ENTER Play the movie file. Use the ) button to navigate in the movie page. Mark Mode Select the target folder or drive. Select the desired ENTER movie title.
Page 84: Using The Remote Control
MY MEDIA Using the Movie List Function NOTE Q.MENU Show the Option menu. Option values changed in the Movie List does not affect Photo List and Music List. Select Set Video Play., Set Video., or Option values changed in Photo List and ENTER Set Audio.
Page 85 Set Video Play Menu Options Select Picture Size, Audio Language, Picture Size: Selects your desired Subtitle, or Repeat. picture format for videos. Audio Language: Changes Make appropriate adjustments. Language Group of the audio for video files. Subtitle Language: The subtitles can Code Page be turned on or off.
Page 86 MY MEDIA * Image shown may differ from your TV. Set Video Menu Options ('TruMotion' dependent on model) Select Picture Mode or TruMotion. Make appropriate adjustments. Reset picture settings to default. BLUE Set Audio Menu Options Select Sound Mode, Auto Volume, Clear Voice II or Balance.
Page 87: Photo List
PHOTO LIST The On-Screen Display on your model may be slightly different. Supported photo file: *.JPG Baseline: 64 pixel (width) x 64 pixel (height) to 15360 pixel (width) x 8640 pixel (height) Progressive: 64 pixel (width) x 64 pixel (height) to 1920 pixel (width) x 1440 pixel (height) You can play JPEG files only.
Page 88: Photo Selection
MY MEDIA Photo Selection Select the target folder or drive. Select the desired pho- ENTER tos. ENTER Photo file is displayed. Use the ) button to navigate in the photo page. Mark Mode Select the target folder or drive. Select the desired ENTER photo files.
Page 89 Full Screen Menu More operations are available in full screen mode. The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. Select the target folder or drive. Use the ) button to navigate in the photo page.
Page 90 MY MEDIA ENTER Select the Slideshow, BGM, (Rotate), (Zoom In), (Energy Saving), Option, or Hide. button to select the previ- ous or next photo. Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show.
Page 91: Using The Photo List Function
Using the Photo List Function NOTE Show the Option menu. Q.MENU Option values changed in Photo List do Select Set Photo View., Set Video., not affect Movie List and Music List. ENTER or Set Audio. Option values changed in Photo List or Music List are changed likewise in Photo List and Music List, but not Movie List.
Page 92 MY MEDIA * Image shown may differ from your TV. Set Video Menu Options (depending on models) Select Picture Mode or TruMotion. Make appropriate adjustments. Initialize the adjusted picture value. BLUE Set Audio Menu Options Select Sound Mode, Auto Volume, Clear Voice II or Balance.
Page 93: Music List
MUSIC LIST This TV cannot play back copy-protected files. The On-Screen Display on your model may be slightly different. MUSIC (*.MP3) supporting file Bit rate 32 Kbps - 320 Kbps Screen Components ENTER ENTER MENU Select Music List. Select MY MEDIA. Preview: If any album jacket for the file (Album Art Image) exists, this picture is displayed.
Page 94 MY MEDIA Music Selection Select the target folder or drive. Select the desired ENTER music file. ENTER Music files are played. Use the ) button to navigate in the music page. Mark Mode Select the target folder or drive. Select the desired ENTER music file.
Page 95 Using the Music List Function NOTE Q.MENU Show the Option menu. Option values changed in Movie List does not affect Photo List and Music Select Set Audio Play. or Set Audio.. ENTER List. Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List.
Page 96 MY MEDIA Set Audio Play Menu Options Select Repeat or Random. Make appropriate adjustments. Set Audio Menu Options Select Sound Mode, Auto Volume, Clear Voice II or Balance. Make appropriate adjustments. If you don't press any buttons for a while, the play information box will float across the screen.
Page 97: Extra Contents
EXTRA CONTENTS - For 32/37/42/47LD452C You can play application files on USB device. Application files your device can be played by this unit. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
Page 98: Ezsign Tv
MY MEDIA EZSIGN TV - For 32/37/42/47LD452B The EzSign TV function allows you to play and manage high-quality ad content that you create quickly and easily using the EzSign TV Editor. For more information of using, refer to the EzSign TV Editor S/W & Manual. √...
Page 99: Divx ® Vod Registration
DIVX ® VOD REGISTRATION Except 32/42/47LD420, 32/37/42/47LD450, 37/42/47LD450C, 32/42/47/55LD520, 55LD520C, 42/47/55LE530C, 42/47LD451C, 32/37/42/47LD452C, 32/37/42/47LD452B, 26LD352C ® In order to play purchased or rented DivX VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. MENU Select MY MEDIA.
Page 100: Picture Control
PICTURE CONTROL PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. You can select a different aspect ratio depending on input source (analog broadcasting, digital broad- casting, aux).
Page 101 16:9 Adjust the picture horizontally, in a linear Choose 4:3 when you want to view a picture proportion to fill the entire screen. with an original 4:3 aspect ratio. Just Scan Zoom Normally the edges of video signals are Choose Zoom when you want to view the cropped 1-2%.
Page 102: Picture Wizard
PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily follow- ing each step.
Page 103 Adjust Backlight. ENTER Adjust Color. ENTER i.e) Adjust Horizontal ENTER Sharpness. Select input source to MARK apply the settings. ENTER Save. ENTER Finish the Picture Wizard. Adjust Vertical ENTER Sharpness. If you stop the Picture Wizard before the final step, the changes will not be saved to the TV.
Page 104: Energy Saving
PICTURE CONTROL ENERGY SAVING It reduces the TV’s power consumption by lowering the backlight level. You can increase the brightness of your screen by adjusting the Energy Saving level or by adjusting the Picture Mode. i.e) When selecting Screen off, the Select PICTURE.
Page 105: Preset Picture Settings (Picture Mode)
PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Depending on models Vivid, Standard, Cinema, Sport, and Select PICTURE. MENU Game Settings are preset for the opti- mum picture quality at the factory.
Page 106: Manual Picture Adjustment - User Mode
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. Backlight: This function adjusts the MENU Select PICTURE. brightness of the backlight behind the LCD screen. Adjusting the back- light is recommended when setting ENTER Select Picture Mode.
Page 107: Picture Improvement Technology (Advanced Control)
PICTURE IMPROVEMENT TECHNOLOGY (ADVANCED CONTROL) Advanced Control allows you to adjust some of the advanced features of your LG display. To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for each Picture Mode.
Page 108: Expert Picture Control
PICTURE CONTROL EXPERT PICTURE CONTROL Expert1 and Expert2 provide even more advanced picture settings for users. Typical used by professionals for calibrating the TV. MENU Select PICTURE. ENTER Select Picture Mode. ENTER Select Expert1 or Expert2. ENTER Select Expert Control. ENTER Select your desired menu option.
Page 109 DVD and Blu-ray movies are filmed at 24 frames per second (fps). With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of Real Cinema a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect.
Page 110 PICTURE CONTROL Show clearer and distinctive yet natural edges in of the video. Edge Enhancer This function is enabled in "Picture Mode - Expert". This is produces richer colors. This feature represents rich color as much as conventional video signal. xvYCC This function is enabled in "Picture Mode - Cinema, Expert"...
Page 111: Picture Reset
PICTURE RESET Settings of the selected picture modes return to the default factory settings. MENU Select PICTURE. ENTER Initialize the adjusted value. ENTER Select Picture Reset. Return to TV viewing. EXIT ENTER Select Yes. POWER INDICATOR Adjust the power/standby indicator light on the front of the TV. Return to the previous menu.
Page 112: Trumotion
PICTURE CONTROL TRUMOTION - For 32/37/42/47/55LE5300, 42/47/55LE7300, 32/42/47/55LD520, 55LD520C, 42/47/55LD630, 42/47/55LE530C Advance video technology that provides clearer, smoother images, even during fast action scenes cre- ating a more stable structure for a crisper picture. Off: Turn off TruMotion operation. MENU Select PICTURE.
Page 113: Sound & Language Control
SOUND & LANGUAGE CONTROL AUTO VOLUME Auto Volume makes sure that the volume level remains consistent whether you are watching a com- mercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed.
Page 114: Clear Voice Ii
SOUND & LANGUAGE CONTROL CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. MENU Select AUDIO. ENTER Select Clear Voice II. ENTER Select On or Off. Adjustment for Clear Voice Level with selecting On Select Level.
Page 115: Balance
BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. MENU Select AUDIO. ENTER Select Balance. ENTER Make appropriate adjustments. Return to the previous menu. BACK RETURN Return to TV viewing. EXIT...
Page 116: Preset Sound Settings (Sound Mode)
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment using factory presets. Standard, Music, Cinema, Sport, and MENU Select AUDIO. Game are preset for optimum sound quality at the factory. You can also adjust Sound Mode in ENTER Select Sound Mode.
Page 117: Sound Setting Adjustment - User Mode
If you select “Clear Voice II-On”, the Infinite Sound feature will not oper- ate. ENTER Select Infinite Sound, Treble, or Bass. Infinite Sound: Infinite Sound is a patented LG proprietary sound pro- ENTER Make appropriate adjustments. cessing technology that strives immersive 5.1 surround sound with...
Page 118: Audio Reset
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. MENU Select AUDIO. ENTER Select Reset. ENTER Select Yes. ENTER Initialize the adjusted value. Return to TV viewing. EXIT...
Page 119: Tv Speakers On/Off Setup
TV SPEAKERS ON/OFF SETUP If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers. MENU Select AUDIO. Return to the previous menu. BACK RETURN ENTER Select TV Speaker. Return to TV viewing. EXIT ENTER Select On or Off. EXTERNAL SPEAKERS ON/OFF SETUP (For 32/37/42/47LD450C, 32/37/47/47LD452C, 32/37/42/47LD452B, 26LD352C) Turn the external speakers on if using external audio equipment.
Page 120: Stereo/Sap Broadcast Setup
SOUND & LANGUAGE CONTROL STEREO/SAP BROADCAST SETUP On analog signals, this TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Analog TV Digital TV Q.MENU...
Page 121: Audio Language
AUDIO LANGUAGE This feature operates only in DTV/Cable DTV mode. MENU Select OPTION. ENTER Select Language. ENTER Select Audio Language. Select your desired language. Return to the previous menu. BACK RETURN Return to TV viewing. EXIT...
Page 122: On-Screen Menus Language Selection
SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. MENU Select OPTION. ENTER Select Language. ENTER Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language.
Page 123: Caption Mode
CAPTION MODE Analog Broadcasting System Captions Captions are provided to help the hearing impaired watch TV. Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Page 124: Digital Broadcasting System Captions
SOUND & LANGUAGE CONTROL Digital Broadcasting System Captions Choose the language you want the DTV/Cable DTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. Select OPTION.
Page 125: Caption Option
Caption Option Customize the DTV/Cable DTV captions that appear on your screen. This function in only available when Caption Mode is set On. Size: Set the word size. MENU Select OPTION. Font: Select a typeface for the text. Text Color: Choose a color for the ENTER Select Caption.
Page 126: Time Setting
TIME SETTING TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting sta- tion. Set the clock manually if the current time is set incorrectly by the auto clock function. MENU Select TIME.
Page 127: Manual Clock Setup
Manual Clock Setup If the current time setting is wrong, reset the clock manually. MENU Select TIME. ENTER Select Clock. ENTER Select Manual. Select the Year, Month, Date, Hour, or Minute option. Set the Year, Month, Date, Hour, or Minute option.
Page 128: Auto On/Off Time Setting
TIME SETTING AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode.
Page 129: Sleep Timer Setting
SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Select TIME. Return to the previous menu. MENU BACK RETURN ENTER Select Sleep Timer. Return to TV viewing.
Page 130: Parental Control / Ratings
PARENTAL CONTROL / RATINGS PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories.
Page 131: Set Password
Set Password Change the password by inputting a new password twice. ENTER MENU Select LOCK. Input the password. Select Set Password. Choose any 4 digits for your new ENTER password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm.
Page 132: Lock System
PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. ENTER MENU When you select On , the Lock Select LOCK. System is enable. Input the password. Select Lock System. ENTER Select On or Off. Return to the previous menu.
Page 133: Channel Blocking
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. If a channel is locked, enter the ENTER MENU Select LOCK. password to unlock it temporarily. Input the password. Select Block Channel.
Page 134: Movie & Tv Rating
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
Page 135 TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. ENTER MENU Age (applies to TV-Y, TV-Y7)
Page 136 PARENTAL CONTROL / RATINGS TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. ENTER MENU Select LOCK. Age (applies to TV-G, T V-PG, T V- 14, T V-MA).
Page 137 TV Rating English - For CANADA Selecting Canadian English rating system. ENTER MENU Select LOCK. If TV Rating-English or TV Rating- French is locked, enter the password to unlocked it temporarily. Input the password. E (Exempt) C (Children) C8+ (Children eight years and older) Select TV Rating-English.
Page 138 PARENTAL CONTROL / RATINGS TV Rating French - For CANADA Selecting Canadian French rating system. ENTER E (Exempt) MENU Select LOCK. G (General) 8ans+ (General-Not convenient for Input the password. little children) 13ans+ (Not convenient for children of 13 years and younger) Select TV Rating-French.
Page 139: Downloadable Rating
DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. Based on rating table, your TV's OSD (On Screen Display) may dif- fer slightly from what is shown in this manual.
Page 140: External Input Blocking
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. i.e) ENTER MENU Select LOCK. Input the password. Select Input Block. ENTER Select input source. Select On or Off. Return to the previous menu. BACK RETURN Return to TV viewing. EXIT...
Page 141: Key Lock
KEY LOCK This feature can be used to prevent unauthorized viewing by locking out the front panel controls, so that it can only be used with the remote control. This TV is programmed to remember which option it was last set to even if you turn the TV off. ENTER MENU Select LOCK.
Page 142: Appendix
APPENDIX APPENDIX TROUBLESHOOTING Abnormal Operation Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. The remote control Ensure that the batteries are installed with correct polarity (+ to +, - to -). doesn’t work Ensure that the correct remote operating mode is set: TV, VCR etc.
Page 143 Audio Problems No output from one Adjust Balance in menu option. of the speakers A change in ambient humidity or temperature may result in an unusual Unusual sound from noise when the product is turned on or off and does not indicate a fault inside the product with the product.
Page 144 APPENDIX Movie List Problems The file does not appear on the Movie Check whether the file extension is supported. List. Message is displayed Check whether the file is playing normally on a PC. (Check whether the saying “This file is file is damaged.) invalid”...
Page 145: Maintenance
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while.
Page 146: Product Specifications
APPENDIX PRODUCT SPECIFICATIONS 22LE5300 (22LE5300-UE) MODELS 19LE5300 (19LE5300-UE) 22LE5500 (22LE5500-UA) Dimensions With stand 471.2 mm x 365.9 mm x 155.4 mm 542.9 mm x 407.1 mm x 155.4 mm (Width x (18.5 inch x 14.4 inch x 6.1 inch) (21.3 inch x 16.0 inch x 6.1 inch) Height Without stand 471.2 mm x 315.5 mm x 34.4 mm...
Page 147 MODELS 32LE5300 (32LE5300-UC) 37LE5300 (37LE5300-UC) Dimensions With stand 784.6 mm x 558.1 mm x 221.0 mm 905.0 mm x 630.0 mm x 270.0 mm (Width x (30.8 inch x 21.9 inch x 8.7 inch) (35.6 inch x 24.8 inch x 10.6 inch) Height Without stand 784.6 mm x 499.5 mm x 39.9 mm...
Page 148 APPENDIX MODELS 42LE7300 (42LE7300-UA) 47LE7300 (47LE7300-UA) Dimensions With stand 1009.2 mm x 694.5 mm x 286.5 mm 1119.6 mm x 757.1 mm x 286.5 mm (Width x (39.7 inch x 27.3 inch x 11.2 inch) (44.0 inch x 29.8 inch x 11.2 inch) Height Without stand 1009.2 mm x 629.7 mm x 29.3 mm...
Page 149 MODEL 32LD420 (32LD420-UA) Dimensions With stand 805.0 mm x 583.0 mm x 224.0 mm (Width x (31.6 inch x 22.9 inch x 8.8 inch) Height Without stand 805.0 mm x 531.0 mm x 79.9 mm x Depth) (31.6 inch x 20.9 inch x 3.1 inch) Weight With stand 10.8 kg (23.8 lbs)
Page 150 APPENDIX MODELS 32LD520 (32LD520-UA) 42LD520 (42LD520-UA) Dimensions With stand 815.0 mm x 585.6 mm x 210.9 mm 1052.2 mm x 720.1 mm x 270.6 mm (Width x (32.0 inch x 23.0 inch x 8.3 inch) (41.4 inch x 28.3 inch x 10.6 inch) Height Without stand 815.0 mm x 529.6 mm x 82.0 mm...
Page 151: Ir Code
IR CODE Code Function Note Code Function Note (Hexa) (Hexa) Remote Control Button POTAL Remote Control Button Remote Control Button GUIDE Remote Control Button VOL + Remote Control Button Remote Control Button VOL - Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button...
Page 152: External Control Through Rs-232C
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software.
Page 153: Set Id
RS-232C Configurations 7-Wire Configuration 3-Wire Configurations ( Serial female-female NULL modem cable ) ( Not standard ) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’ . Real data mapping Select OPTION.
Page 154: Command Reference List
APPENDIX Command Reference List Transmission / Receiving Protocol COMMAND1 COMMAND2 DATA Transmission (Hexadecimal) [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power 00 - 01 [Command 1] : First command to control the set. 02. Input Select P.155 k, m or x) 03. Aspect Ratio P.155 [Command 2] : Second command to control the set.
Page 155 01. Power (Command: k a) 05. Volume Mute (Command: k e) To control Power On/Off of the TV. To control volume mute on/off. You can also adjust mute using the MUTE button on Transmission [k][a][ ][Set ID][ ][Data][Cr] remote control. Data 00: Power Off Data 01: Power On Transmission [k][e][ ][Set ID][ ][Data][Cr]...
Page 156 APPENDIX 11. Sharpness (Command: k k) Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] To adjust screen sharpness. You can also adjust sharpness in the Picture menu. 17. Color Temperature (Command: x u) Transmission [k][k][ ][Set ID][ ][Data][Cr] To adjust color temperature. Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) You can also adjust color temperature in the Picture menu.
Page 157 Data5: Acknowledgement[a][ ][Set ID][ ][OK][Data00] Step [Data01] [Data02][Data03][Data04][x][a][ ][Set ID][ ] Main/Sub Two/One Part Using Physical Reserved Channel Channel [NG][Data00][x] Picture 0 Main 0 Two 0 Use NTSC Air 1 Sub 1 One 1 No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc...
Page 158: Open Source License
APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 licensed for everyone's free use or not licensed at all. Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA The precise terms and conditions for copying, distribution Everyone is permitted to copy and distribute verbatim cop- and modification follow.
Page 159 b) You must cause any work that you distribute or pub- c) Accompany it with the information you received as to lish, that in whole or in part contains or is derived the offer to distribute corresponding source code. from the Program or any part there of, to be licensed (This alternative is allowed only for noncommercial as a whole at no charge to all third parties under the distribution and only if you received the program in...
Page 160 APPENDIX 7. If, as a consequence of a court judgment or allegation the program specifies a version number of this license of patent infringement or for any other reason (not lim- which applies to it and "any later version", you have the ited to patent issues), conditions are imposed on you option of following the terms and conditions either of (whether by court order, agreement or otherwise) that...
Page 161 END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If the program is interactive, make it output a short notice If you develop a new program, and you want it to be of the like this when it starts in an interactive mode: greatest possible use to the public, the best way to achieve Gnomovision version 69, Copyright (C) year name of author...
Page 162: Gnu Lesser General Public License
APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 that there is no warranty for the free library. Also, if the Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA library is modified by someone else and passed on, the Everyone is permitted to copy and distribute verbatim cop- recipients should know that what they have is not the of this license document, but changing it is not...
Page 163 Although the Lesser General Public License is Less protec- notices that refer to this license and to the absence of tive of the users' freedom, it does ensure that the user of a any warranty; and distribute a copy of this license along program that is linked with the Library has the freedom and with the Library.
Page 164 APPENDIX 3. You may opt to apply the terms of the ordinary GNU the library will still fall under Section 6.) General Public License instead of this License to a given copy of the Library. To do this, you must alter all the Otherwise, if the work is a derivative of the library, you notices that refer to this License, so that they refer to the may distribute the object code for the work under the...
Page 165 For an executable, the required form of the "work that You are not responsible for enforcing compliance by uses the library" must include any data and utility pro- third parties with this license. grams needed for reproducing the executable from it. However, as a special exception, the materials to be 11.
Page 166 APPENDIX If the library does not specify a license version number, it free software that everyone can redistribute and change. You can do so by permitting redistribution under these you may choose any version ever published by the Free Software Foundation. terms (or, alternatively, under the terms of the ordinary General Public License).
Page 167 MOZILLA PUBLIC LICENSE Version 1.1 --------------- 1.Definitions. which, at the time of its release under this license is not already covered code governed by this license. 1.0.1. “Commercial use” means distribution or otherwise making the covered code available to a third party. 1.10.1.
Page 168 APPENDIX (c) the licenses granted in this section 2.1(a) and (b) offer or impose any terms on any source code ver- are effective on the date Initial developer first sion that alters or restricts the applicable version of distributes original code under the terms of this this license or the recipients' rights hereunder.
Page 169 (c) Representations. code with other code not governed by the terms of contributor represents that, except as disclosed pur- this license and distribute the larger work as a single suant to section 3.4(a) above, contributor believes that product. In such a case, you must make sure the contributor's modifications are contributor's original requirements of this license are fulfilled for the cov- creation(s) and/or contributor has sufficient rights to...
Page 170 APPENDIX 7. DISCLAIMER OF WARRANTY. ed to You by such participant under sections COVERED CODE IS PROVIDED UNDER THIS 2.1(b) and 2.2(b) are revoked effective as of the LICENSE ON AN “AS IS” BASIS, WITHOUT date you first made, used, sold, distributed, or WARRANTY OF ANY KIND, EITHER EXPRESSED had made, modifications made by that partici- OR IMPLIED, INCLUDING, WITHOUT LIMITATION,...
Page 171 11. MISCELLANEOUS. This license represents the complete agreement con- EXHIBIT A -Mozilla Public License. cerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision The contents of this file are subject to the Mozilla Public shall be reformed only to the extent necessary to License Version 1.1 (the “license”);...
Page 172 The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODEL SERIAL...

LG 2LD450 Owner's Manual

Warning / Caution

Safety Instructions

Feature of this Tv

Preparation

External Equipment Setup

Watching Tv / Channel Control

My Media

Picture Control

Sound & Language Control

Time Setting

Parental Control / Ratings

Appendix

Quick Links

Related Manuals for LG 2LD450

Summary of Contents for LG 2LD450

This manual is also suitable for:

Table of Contents