Hide thumbs Also See for KT-SR2000:
®
SIRIUS
Radio
KT-SR2000
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1261-001A
[J]
Table of Contents
loading

Summary of Contents for JVC KT-SR2000

  • Page 1 ® SIRIUS Radio KT-SR2000 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bot- tom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
  • Page 2 INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 3: Table Of Contents

    Radio KT-SR2000, called “JVC Plug-In–Play (PnP),” lets you enjoy SIRIUS Satellite Radio’s digital entertainment streams anywhere you’ve installed either KS-K6012 Car Docking Kit or KS-K6013 Home Docking Kit (sold separately). Use this manual to familiarize yourself with all of JVC PnP’s features and capabilities.
  • Page 4: Safety Precautions

    Take the following precautions to prevent traffic accidents and avoid personal injury: • Installation must be performed according to this instruction manual. JVC is not responsible for issues arising from installations not performed according to the procedures in this manual.
  • Page 5: Box Contents

    (The battery has been installed when shipped from the factory.) If anything is missing or damaged, or if your JVC PnP fails to operate, notify your shipper immediately. It is recommended that you keep the original packaging in case you need to ship your JVC PnP in the future.
  • Page 6: Installation: Preparation

    Installation: Preparation To use your JVC PnP in your car or at home, it is required to separately purchase either KS-K6012 Car Docking Kit or KS-K6013 Home Docking Kit. KS-K6012 includes... • Installations • Car Docking Cradle • Suction Cup Mount •...
  • Page 7: Installation In Your Car With Ks-K6012

    • Do not install JVC PnP where it will hinder your access to the car’s controls. • Do not install JVC PnP where it may hinder the function of safety devices such as an airbag.
  • Page 8 Temporarily plug the cigarette lighter adapter into the cigarette lighter. Slide JVC PnP all the way into the cradle so that the connector at the bottom of the unit makes proper contact in the cradle.
  • Page 9 Press the (POWER) button to turn on your JVC PnP. • If your JVC PnP has been properly connected and the antenna is receiving the SIRIUS signal, you will hear audio. • If your JVC PnP has not been properly connected, “Antenna Error”...
  • Page 10 Installation in Your Car with KS-K6012 (continued) Route the cable from the antenna into the trunk by tucking it underneath the rubber molding around rear window. • Route the cable from the lowest point of the rear window. Take advantage of any existing cable channels or wiring conduits.
  • Page 11: Installation In A Home With Ks-K6013

    You can also use FM signal transmitter to output the sound of JVC PnP to your FM tuner. When you use this function, see “4 FM Transmitter Options” on page 24.
  • Page 12: Jvc Pnp's Controls And Features

    JVC PnP’s Controls and Features SIRIUS ® Radio ∞ DISP MEMO BAND S - S E E K Remote controller MENU POWER MUTE SELECT MEMO BAND MENU DISP DIRECT PREV...
  • Page 13 1 Main display (POWER) Turns on and off the power. 3 MEMO (memory) (S-SEEK) Stores and recalls the Artist/Song Title information. 4 BAND (P.TUNE) Selects the 3 bands of stream presets; enters and exits from the Preset Tuning Mode. 5 CH (channel) 5 / ∞ (CH + / –), CAT (category) 2 / 3 (CAT –...
  • Page 14: Activating Your Sirius Subscription

    Once all updated SIRIUS channel streams are received, “Call 1-888-539-SIRIUS to Subscribe” appears on the display and JVC PnP now tunes in to the SIRIUS Satellite Radio’s Preview Channel (Ch184). • You cannot tune in to any other channels until you activate your SIRIUS subscription.
  • Page 15: Basic Operation

    Basic Operation After you have successfully activated your SIRIUS subscription, the Normal Operation screen will appear: Press CH 5 / ∞ (or CH + / – on the remote controller) to select streams. • The selected stream will automatically play, and the name and artist of the currently playing song will scroll across the display.
  • Page 16: Selecting Music

    Selecting Music Your JVC PnP has three ways to search for and select music: by stream, by artist, and by song. Selecting Music by Stream (Stream List) 1. Press and hold DISP (display) for about 2 seconds while in the Normal Operation mode.
  • Page 17: Direct Tuning

    Selecting Music by Song Title (Song Title List) 1. Press and hold DISP (display) for about 2 seconds while in the Normal Operation mode. • To cancel the operation, press and hold DISP (display) again. 2. Press DISP (display) twice again. The Song Title List screen (below) appears, showing all currently playing songs regardless of category.
  • Page 18 You can search for a preset stream using the list. 1. Press and hold BAND while in the Normal Operation mode. JVC PnP enters Preset Tuning mode. • Each time you press and hold the button, the Normal Operation screen and the Preset Tuning Mode screen alternate.
  • Page 19: Enlarging The Indications-Display Button

    3. Press DISP (display) repeatedly until the desired Preset Stream List screen appears. • Each time you press the button, the Preset lists changes from “Stream List”, “Artist List,” then “Song Title List.” Artist List 4. Press CH 5 / ∞ (or CH + / –) repeatedly to select your desired item, then press SEL (or SELECT).
  • Page 20: S-Seek Function-Memory Button

    Sirius signal and alert you when a saved song is being played—S-Seek function. To store the information While your JVC PnP is showing either of the following screens, press MEMO (memory). Normal Operation The current program data information is stored in memory.
  • Page 21 • Cancel: Not to store a new information. The original screen will be resumed. How S-Seek function works Each time JVC PnP is turned on, it automatically searches the incoming signal to determine if a match exists between the signal and the PDTs stored in memory (except the ones with “S-Seek”...
  • Page 22: Menu Options Settings

    2. Press CH 5 / ∞ (or CH + / –) repeatedly to select an unnecessary PDT, then press SEL (or SELECT). The following screen appears. 3. Press CH 5 / ∞ (or CH + / –) to select either “Delete”...
  • Page 23: Basic Setting Procedure

    To exit from this mode, press MENU as many times as required. Note: If no operation is done for about 10 seconds, JVC PnP automatically exits from the Menu Options screen. 1 Sirius ID Displays your 12 digit Sirius ID number. No adjustments are allowed in this mode.
  • Page 24: Confirm Tone Options

    (POWER) or some operation buttons. • Off: To deactivate the confirmation beep. 4 FM Transmitter Options This option functions only when your JVC PnP is connected to the Car Docking Kit KS-K6012. The following settings are possible on this sub-menu screen—“FM On/Off”...
  • Page 25: Add Or Skip

    6 Lock Options You can prohibit access to the particular streams. When you try to tune in to these prohibited streams, your JVC PnP asks you to enter the access code. Lock/Unlock Upon entering “Lock/Unlock” for the first time, you are asked to enter the 4-digit code that is used to lock/ unlock stream access.
  • Page 26: Audio Level Options

    7 Audio Level Options You can adjust the audio level and gain at the same time when you feel that the sound through your JVC PnP is too small or too loud. Upon entering this mode, a horizontal bar graph is displayed.
  • Page 27: Antenna Aiming

    8 Antenna Aiming This is required to be adjusted only when you use your JVC PnP at home. You can ensure optimum reception when locating the SIRIUS antenna. Upon entering this mode, two horizontal bar graphs are displayed. The satellite signal strength level is displayed on the SAT graph while the terrestrial signal strength level is displayed on the TER graph.
  • Page 28: Time Based Features

    0 Time Based Features The following adjustments are possible on this sub- menu screen— • Clock • Alarm Clock • Program Alert • Auto Shutdown • Sleep Mode Clock When entering this menu option, you can set up the clock shown on the display. The clock data is provided via the SIRIUS Satellite stream, and will be updated automatically.
  • Page 29 Alarm Clock You can set your JVC PnP to turn on at a specific time. The last selected stream prior to shutdown will be played when the Alarm turns on your JVC PnP. Set Alarm: Press CH 5 / ∞ (or CH + / –) to select either “Alarm On”...
  • Page 30: Factory Default

    “Program Alert On” or “Program Alert Off”, press SEL (or SELECT). Auto Shutdown You can make your JVC PnP shut off automatically if no operation is done for about one hour. A beep tone sounds just one minute before your JVC PnP shuts off, and the “Cancel Auto Shutdown”...
  • Page 31: Specifications

    68 mm × 110 mm × 28 mm (2 11/16 inches × 4 3/8 inches × 1 1/8 inches) Troubleshooting Your JVC PnP does not turn on. ] The fuse is blown. ] Power is not supplied properly. Check the power cable connection.
  • Page 32 Visit us on-line for Technical Support & Customer Satisfaction Survey. US RESIDENTS ONLY Having TROUBLE with operation? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! © 2004 Victor Company of Japan, Limited 0704MNMMDWKRI...

This manual is also suitable for:

Kt-sr2000j

Table of Contents