Fujitsu LIFEBOOK E544 Operating Manual

Fujitsu LIFEBOOK E544 Operating Manual

Hide thumbs Also See for LIFEBOOK E544:
Table of Contents
System
Operating Manual
FUJITSU LIFEBOOK E544
FUJITSU LIFEBOOK E554
Table of Contents
loading

Summary of Contents for Fujitsu LIFEBOOK E544

  • Page 1 System Operating Manual FUJITSU LIFEBOOK E544 FUJITSU LIFEBOOK E554...
  • Page 2 You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2014. All rights reserved. Publication Date 05/2014 Order No.: A26391-K400-Z320-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK E544 FUJITSU LIFEBOOK E554 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
  • Page 7: Table Of Contents

    Using the power-management features ........... 39 Fujitsu...
  • Page 8 Attaching the cover ..............66 Fujitsu...
  • Page 9 Index ................. . 84 Fujitsu...
  • Page 10 Contents Fujitsu...
  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.
  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...
  • Page 13: Ports And Controls

    This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device. Front LIFEBOOK E544: 1 = Microphone (optional) 7 = Status indicators 2 = WebCam (optional)
  • Page 14 1 = DC input connector (DC IN) 6 = USB 3.0 port with charging function (Anytime USB charge) 2 = Ventilation slots 7 = SmartCard reader (optional) 3 = LAN port 8 = Memory card slot 4 = Monitor port (VGA) 5 = DisplayPort Fujitsu...
  • Page 15 1 = Headphone port 4 = USB 3.0 port 2 = Microphone port 5 = Module bay with optional optical drive 3 = USB 3.0 port 6 = Security Lock device Rear 1 = Serial port option (for LIFEBOOK E554 only) Fujitsu...
  • Page 16 Bottom 1 = Module release 5 = Ventilation slot cover 2 = Battery release 6 = Memory service compartment 3 = Port replicator port 7 = Hard disk service compartment 4 = Battery compartment (SIM card under the battery) Fujitsu...
  • Page 17: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...
  • Page 18: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 83). Fujitsu...
  • Page 19: Notebook: Transporting

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu...
  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...
  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...
  • Page 22: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".
  • Page 23: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the drives and the keyboard functions. Fujitsu...
  • Page 24: Key Description

    The effect that this key has varies between applications. Energy saving functions indicator • Indicator is illuminated: One of the energy saving functions has been activated. • The indicator is not illuminated: The energy saving functions have been deactivated. Fujitsu...
  • Page 25: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu...
  • Page 26: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 27 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
  • Page 28: Virtual Numeric Keypad

    Numeric keypad Virtualnumerickeypad Num Lock LIFEBOOK E544 has a virtual number block, LIFEBOOK E554 has a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key.
  • Page 29: Separate Number Block

    Separate number block Numeric keypad Separatenumeric keypad Num Lock LIFEBOOK E544 has a virtual number block, LIFEBOOK E554 has a separate number block. The keyboard of your notebook has a separate number block on the far right. Key combinations Keycombinations The following description of key combinations applies to Windows operating systems.
  • Page 30 This key combination opens the Windows security/Task-Manager Ctrl window. Ctrl+Alt+Del Back tab This key combination moves the cursor back to the previous tab stop. Shift+Tab Backtab Key combinations using the Windows keys are detailed in the manual for your operating system. Fujitsu...
  • Page 31: Country And Keyboard Settings

    For a description of the LED color, "Status indicators", Page Wireless Components key This application key is used to start the WirelessSelector software. The wireless components that have been activated in the BIOS Setup can be switched on and off individually. Fujitsu...
  • Page 32: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...
  • Page 33: Dragging Items

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a particular resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image.
  • Page 34: Webcam

    If you would like to perform a function test of your web cam, there is suitable test software available at "http://www.fujitsu.com/fts/support/index.html". Fujitsu...
  • Page 35: Rechargeable Battery

    Never store the batteries in the device. Removing and installing the battery Only use batteries approved by Fujitsu for your notebook. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 36: Removing A Battery

    "Preparing to remove components", Page ► Slide the release button in the direction of the arrow (1) and hold it in place. ► Slide the release button in the direction of the arrow (2). ► Remove the battery from the battery compartment (3). Fujitsu...
  • Page 37: Installing A Battery

    ► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1). ► Slide the release button in the direction of the arrow (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
  • Page 38: Module

    The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Slide the release mechanism (1) in the direction of the arrow and hold. ► Pull the module (2) out of the module bay. Fujitsu...
  • Page 39: Installing A Module

    Avoid storing a data carrier in areas subject to high temperatures or humidity. You can use data carriers with a diameter of 8 cm / 3.15" or 12 cm / 4.7" in the drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu...
  • Page 40: Cd/Dvd Indicator

    ► Gently pull the drive tray (2) completely out. ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu...
  • Page 41: Manual Removal (Emergency Removal)

    Do not use any cleaning liquids! Ensure that no liquid enters the device. To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on. ► Prepare for removal, see chapter "Preparing to remove components", Page Fujitsu...
  • Page 42 ► Clean the dust chamber. ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
  • Page 43: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...
  • Page 44: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the storage card (1). Memory card The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu...
  • Page 45: Loudspeakers And Microphones

    UMTS module. Follow the instructions supplied by the provider of the SIM card. The SIM card slot is located in the battery compartment and can only be accessed when the battery is removed. Fujitsu...
  • Page 46: Inserting The Sim Card

    ► Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (3). ► Install the battery again, see "Installing a battery", Page ► Complete the installation, see chapter "Finishing component removal", Page Fujitsu...
  • Page 47: Removing The Sim Card

    ► Remove the SIM card from the SIM card holder (2). ► Push the SIM card holder back into the slot (3). ► Install the battery again, see "Installing a battery", Page ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
  • Page 48: Wireless Lan/Bluetooth/Umts/Lte Radio Components

    Working with the notebook Wireless LAN/Bluetooth/UMTS/LTE radio components The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ► Press the button to start the WirelessSelector.
  • Page 49: Access Via Umts/Lte

    Working with the notebook Access via UMTS/LTE You can purchase the accessories for UMTS/LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered a UMTS/LTE module, your device will already be prepared when you receive it.
  • Page 50: Your Port Replicator

    11 = Connector on the port replicator for the docking port on the bottom of the notebook 5 = DisplayPort 12 = Release 6 = DVI-D monitor port 7 = VGA monitor port The DVI port and DisplayPort cannot be used at the same time. Fujitsu...
  • Page 51: Connecting The Notebook To The Port Replicator

    ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly. Fujitsu...
  • Page 52: Connecting The Mains Adapter To The Port Replicator

    Port Replicator of the same type. Switching on the notebook via the port replicator ► Press the ON/OFF switch on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up. Fujitsu...
  • Page 53: Disconnecting The Notebook From The Port Replicator

    We recommend that the notebook is switched off or that the appropriate undocking function provided by the operating system is executed. ► Switch the notebook off. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu...
  • Page 54: Security Functions

    The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). Fujitsu...
  • Page 55: Using The Security Lock

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.
  • Page 56: Protecting The Bios Setup Utility (Supervisor And User Passwords)

    You can only change the supervisor password if you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu...
  • Page 57: Password Protection For Booting Of The Operating System

    After a supervisor password has been set additionally a HDD password can be set in the Hard Disk Security menu. The hard disk is locked with this password. Data on the locked disk can’t be read in another system unless the correct HDD password is entered. Fujitsu...
  • Page 58: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...
  • Page 59: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.
  • Page 60: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...
  • Page 61: Connecting An External Monitor

    "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...
  • Page 62: Connecting External Devices To The Serial Port (Optional)

    Devices connected to the serial port require drivers. Your operating system already includes many drivers. If the required driver is missing then it will be necessary to install it. Up-to-date drivers are usually available on the Internet or will be supplied with the device on a data carrier. Fujitsu...
  • Page 63: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...
  • Page 64: Usb Port With Charging Function (Anytime Usb Charge)

    You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp), even if the notebook is switched off. Fujitsu...
  • Page 65: Connecting An External Sata Hard Disk (Esata) (Port Replicator Only)

    ► Left-click on the symbol to remove hardware safely. ► Select the device you wish to shut down and remove. ► Press the "Enter" key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...
  • Page 66: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...
  • Page 67: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...
  • Page 68: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...
  • Page 69: Removing A Cover

    ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...
  • Page 70: Installing A Memory Module

    ► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu...
  • Page 71: Removing And Installing The Hard Disk

    If you install the wrong screws, components may be damaged. The screws are not all the same length and when the cover is installed, the correct screws must be used. ► Lift the cover off the notebook (2). Fujitsu...
  • Page 72: Removing A Hard Disk

    Removing and installing components during servicing Removing a hard disk ► To release the hard disk from the contacts, pull the hard disk in the direction of the arrow (1). ► Remove the hard disk from the hard disk compartment (2). Fujitsu...
  • Page 73: Installing A Hard Disk

    Removing and installing components during servicing Installing a hard disk ► Place the hard disk into the hard disk compartment (1). ► Pull the hard disk in the direction of the arrow (2) until it engages in the contacts. Fujitsu...
  • Page 74: Attaching The Cover

    ► Install the battery again (see "Installing a battery", Page 33). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...
  • Page 75: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...
  • Page 76: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...
  • Page 77: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...
  • Page 78: Restoring The Hard Disk Contents Under Windows

    Hotline/Service Desk. When certain characters are entered on the keyboard, only numerals are written Abeepsounds everysecond Cause Troubleshooting The virtual numeric keypad of your device is ► Press the key. activated, see "Virtual numeric keypad", Page 24 Fujitsu...
  • Page 79: The Notebook's Lcd Screen Remains Blank

    ► Check whether the data cable is properly connected to the notebook and the external monitor (if it is plugged in with a connector). ► Switch on the external monitor and the notebook. Fujitsu...
  • Page 80: The External Monitor Is Blank Or The Image Is Unstable

    ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. The power adapter is not connected correctly. ► Check whether the mains adapter is connected correctly to the notebook. ► Switch the notebook on. Fujitsu...
  • Page 81: The Notebook Stops Working

    The wireless component is enabled. Despite ► Check whether the radio connection is this, the wireless connection to a network does switched on via the software. not work. ► Further information on using the radio component can be found in the help files. Fujitsu...
  • Page 82: Acoustic Warnings

    Supervisor PIN. SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...
  • Page 83: Error Messages On The Screen

    Press to resume, to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu...
  • Page 84 ► Contact your sales outlet or our customer service centre. System cache error - Cache disabled ► Contact your sales outlet or our customer service centre. System timer error ► Contact your sales outlet or our customer service centre. Fujitsu...
  • Page 85: Technical Data

    The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/".
  • Page 86: Mains Adapter

    100 V – 240 V (automatic) Rated frequency 50 Hz – 60 Hz (automatic) Secondary Rated voltage 19 V Max. rated current 3.42 A / 4.22 A / 4.74 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...
  • Page 87: Manufacturer's Notes

    Declarationofconformity The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. CE marking...
  • Page 88: Index

    37 Fault CE marking 83 correction 73 Charging capacity, battery 31 Fingerprint sensor 50 Cleaning 15 configure 50 Components First-time setup installing / removing 63 Fn key 23 Configuration, BIOS Setup Utility 71 Fn+F10 26 Connecting audio devices 62 Fujitsu...
  • Page 89 LCD screen is too dark 75 cleaning 15 Life, battery 31 disposal / recycling 83 Line feed 23 energy saving 14 Loudspeakers 41 LCD screen 29 switch off 25 Safety 13 switch on 25 transport 14 Num Lock indicator 20, 24–25 Main memory Fujitsu...
  • Page 90 Mains adapter 82 notebook 81 The radio connection to a network does not work 77 Safety notes 13 Time not correct 74 Screen Time, daylight savings 74 no screen display 76 Tips 73 Screen brightness Toggle output screen 26 decrease 26 Fujitsu...
  • Page 91 Transport damage 16 Transportation 14–15 Travel, notebook 14 Troubleshooting 73 Webcam 30 Trusted Platform Module 54 Weight Saver Removing 34 Windows key 23 Wireless LAN: USB charging function 60 safety notes 13 USB ports 59 User password changing 52 Fujitsu...

This manual is also suitable for:

Lifebook e554

Table of Contents