Panasonic WV-CP310 Operating Instructions Manual
Color cctv camera
Hide thumbs
Also See for WV-CP310:
- Operating instructions manual (28 pages) ,
- Preliminary (2 pages) ,
- Installation manual (32 pages)
Table of Contents
Operating Instructions
Color CCTV Camera
WV-CP300 Series
Model No.
WV-CF344 Series
WV-CP300
WV-CF344
(Lens is optional for WV-CP300 Series.)
This manual covers the models: WV-CP300 Series (WV-CP310, WV-CP314, WV-CP300, WV-CP304) and WV-CF344
Series (WV-CF354, WV-CF344).
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Table of Contents
Related Manuals for Panasonic WV-CP310
Summary of Contents for Panasonic WV-CP310
-
Page 1: Operating Instructions
WV-CP300 WV-CF344 (Lens is optional for WV-CP300 Series.) This manual covers the models: WV-CP300 Series (WV-CP310, WV-CP314, WV-CP300, WV-CP304) and WV-CF344 Series (WV-CF354, WV-CF344). Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. -
Page 2: Preface
The following notations are used when describing the functions limited for specific models. The functions without the notations are supported by all models. CP310 : The functions with this notation are available when using the model WV-CP310 and WV-CP314. CP310 CP310 : The functions with this notation are available when using the model WV-CP300 and WV-CP304. -
Page 3: Table Of Contents
Contents Preface .................. 2 Special menu setting [SPECIAL SETUP] ......23 About the user manuals ............ 2 17. Chroma level adjustment [CHROMA GAIN] ..... 23 Trademarks and registered trademarks......2 18. Aperture level adjustment [AP GAIN] ......23 About notations ..............2 19. -
Page 4: About The Setup Menus
About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. List of setup menu Setup item Description CAMERA ID... -
Page 5: Basic Operation
The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. The description below explains how to operate the setup menu basically. Screenshots of WV-CP310 are shown as an example. Screenshot 1 Hold down the [SET] button for about 2 seconds to call up the Step 1 top screen of the setup menu. -
Page 6: Screen Transition Diagram
Screen transition diagram CP310 CP310 CP300 Top screen “CAMERA ID” screen MODEL WV-CP310 SERIES **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP**... -
Page 7: Screen Transition Diagram
CP310 CP310 Screen transition diagram CP300 Top screen “CAMERA ID” screen MODEL WV-CP300 SERIES **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER... -
Page 8: Cf354 Cp300
Screen transition diagram CF354 Top screen “CAMERA ID” screen MODEL WV-CF354 **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH) SENS UP... -
Page 9: Screen Transition Diagram
Screen transition diagram CF344 Top screen “CAMERA ID” screen MODEL WV-CF344 **CAMERA ID** CAMERA ID 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ SPECIAL ().,'":;&#!?= LANGUAGE +-*/%$ SPACE POSI RET TOP END RESET ....SETUP DISABLE “CAMERA SETUP” screen **CAMERA SETUP** SCENE1 ALC/ELC SHUTTER ON(HIGH) SENS UP... -
Page 10: Camera Title Setting [Camera Id]
The camera title is named with up to 16 characters. Follow the procedure below to specify the camera title. “CAMERA ID” screen Display positioning screen Top screen MODEL WV-CP310 SERIES **CAMERA ID** FLOOR 1 0123456789 CAMERA ID ABCDEFGHIJKLM... -
Page 11: Camera Operation Setting [Camera Setup]
Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the “CAMERA SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. The settings configured on the “CAMERA SETUP” screen will be saved as a scene file. 1. -
Page 12: Back Light Compensation Function
Back light compensation function Follow the procedure below. “CAMERA SETUP” screen “ALC CONT” screen Mask setting screen **ALC CONT**(1) **CAMERA SETUP** SCENE1 BACK LIGHT COMP ALC/ELC SHUTTER ON(HIGH) SENS UP WHITE BAL ATW1 HIGH MASK SET D&N(IR) AUTO1 LEVEL .I..RET TOP END RET TOP END Step 1... -
Page 13: Electronic Shutter Setting [Shutter]
Step 6 Hold down the [SET] button for more than 2 seconds after completion of masking. → Return to the previous menu. Step 7 Move the cursor to “LEVEL” and press the [RigHT] or [LEfT] button to adjust the level. 3. -
Page 14: Manual Fine Adjustment Of White Balance
AWC: Activates the automatic white balance control mode. This adjustment is suitable for a location where a light source is stable. The adjustment of the color temperature ranges from 2000 K to 10000 K. When “AWC” is selected, the white balance needs to be adjusted. -
Page 15: Digital Noise Reduction Function Setting [Dnr]
Step 1 Set “WHITE BAL” to “ATW1”, “ATW2” or “AWC” and press the [SET] button. → The fine adjustment screen appears. Step 2 Move the cursor to “R” and “B” and press the [LEFT] or [RIGHT] button to fine adjust the level for each. “R” stands for red and “B” stands for blue. -
Page 16: Vmd Setting [Vmd]
AUTO2: Used a near-infrared light source at night time. ON: Displays black-and-white images. CP310 OFF: Displays color images. CP310 AUTO: Similar to the basic functions of AUTO1, but does not change the IR filter. CP300 Switches to black-and-white images when the illuminance around the camera is lower than approx. 0.1 lx. CF354 OFF (default): Displays color images. -
Page 17: Setting Of Motion Detection
Important: • The following circumstances may result in detection failure or false detection. Use the camera after adjusting the detection area and sensitivity. • Not enough difference in brightness between the background and the moving photographic subject, or significant changes in brightness •... -
Page 18: Setting Of Scene Change Detection
Step 3 Hold down the [SET] button for more than 2 seconds after completion of masking. → Return to the previous menu. Step 4 Move the cursor to “ALARM” and press the [LEFT] and [RIGHT] buttons to select “ON” or “OFF”. ON: Outputs alarm signal when in display mode. -
Page 19: Camera System Setting [System Setup]
Camera system setting [SYSTEM SETUP] Performs the settings relating to the camera system such as synchronization, and privacy zone. The following settings can be configured on the “SYSTEM SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “SYSTEM SETUP”... -
Page 20: Image Stabilizer Setting [Stabilizer]
Step 4 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the left upper position of the zone to be set and press the [SET] button. Step 5 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to determine the lower right position of the zone to be set and press the [SET] button. -
Page 21: Upside-Down Setting [Upside-Down]
Step 2 Move the cursor to “PUSH SET” of “ZOOM” and press the [SET] button. → The zoom setting screen appears. Step 3 Adjust the angular field of view by changing the electronic zoom factor (up to 2x) using the [UP] or [DOWN] button, and press the [SET] button. - Page 22 Important: • The following are recommendation for focus setting in accordance with subjects. For such case (subject conditions) Select this (recommendation) • Normal subject “ABF” • Frequently moving subject Fine adjustment with "MANUAL" setting after “ABF” . • Subject with large illuminance change •...
-
Page 23: Special Menu Setting [Special Setup]
Special menu setting [SPECIAL SETUP] The special menu setup is performed including the setting of the camera image quality and the communication configuration when a receiver is used. The following settings are to be configured on the "SPECIAL SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. -
Page 24: Communication Setting
Step 2 Select a number (1 to 16) with which a pixel compensation point is registered and press the [SET] button. → The pixel compensation positioning screen appears. Step 3 Press the [UP], [DOWN], [RIGHT], and [LEFT] buttons to move the crosshair cursor to the center of the flaw to be corrected and press the [SET] button. -
Page 25: Camera Language Selection [Language Setup]
Camera language selection [LANGUAGE SETUP] A language for the setup menu is selected from the following: The language selection can be made on the “LANGUAGE SETUP” screen displayed from the top screen. Refer to page 5 for how to call up the screen. “LANGUAGE SETUP”... -
Page 26: Shortcut Operation
Shortcut operation Use of a system controller with the “Camera function” button allows users to perform the shortcut settings with use of the numeric keypad and camera function button. The available shortcut operations with this unit are shown as follows. System controller operation Setting contents CP310... - Page 27 Panasonic System Communications Company of North America, Unit of Panasonic Corporation of North America www.panasonic.com/business/ For customer support, call 1.800.528.6747 Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A. Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 www.panasonic.ca...