Table of Contents
Timer Operation
Note for timer settings:
Any interruption of the power supply, such as a blackout or cutting off of a circuit breaker, makes the set internal clock incorrect.
In such a case, the TIMER indicator on the indoor unit blinks, and you need to readjust the setting.
ON timer or OFF timer
You can set the ON timer or OFF timer with the following steps.
Press the TIMER SETTING button to start the setting.
1
The WEEKLY indicator will be ashing on the remote controller.
Press the SELECT button to choose the desired mode. The mode
2
will change as follows:
ON/OFF
WEEKLY
(ON)
Press the NEXT button. Continue to setting for each mode.
3
* To cancel timer setting during the setting process, press the
TIMER SETTING button again.
Adjust the time by pressing the SELECT button while the clock
4
indicator is blinking. Each time you press the button, the time will
change by 5/ 5 minutes. Pressing down will change the time by
10/ 10 minutes.
Press the SEND button.
5
To redo the timer setting, perform step 1 to 5 again.
To cancel the ON/OFF timer, press the ON/OFF button while the ON/
OFF indicator is on. (Erases the indicator)
Program timer (combined use of the ON timer and the OFF timer)
You can set an integrated ON OFF or OFF ON timer.
Either of the timer whose con gured starting time is closer to the
current time works rst, and the order of timer operation is displayed
as follows:
Timer
ON OFF timer
OFF ON timer
To set the program timer, conduct the same steps 1~5 for the ON/
OFF timer. (Select ON⇔OFF in Step 2)
Notes:
If you change the setting value for the timer after the program timer
is set, the counting down of the timer will be reset at that moment.
Time setting for each combination should be within a span of 24 hours.
SLEEP timer
To set the SLEEP timer, rst follow steps 1~3 for the ON/OFF timer.
Adjust the time by pressing the SELECT button while the clock
4
indicator is blinking.
Each time you press the button, the time changes as follows:
0H
1H
30M
00M
(30 min.)
Press the SEND button.
5
To cancel the SLEEP timer, press the SLEEP button while the SLEEP
indicator is on. (Erases the indicator)
To help you to fall asleep comfortably and prevent e cessive
cooling in sleep, the SLEEP timer controls the temperature setting
automatically in accordance with the set time shown as follows. The
air conditioner completely turns off after the set time has elapsed.
Set temperature
En-6
OPERATING MANUAL
9333003023_OM_EN.indd 6
ON/OFF
ON/OFF
⇔
(OFF)
(ON
OFF)
Indicator on remote controller display
2H
3H
5H
7H
00M
00M
00M
00M
In COOL or DRY mode
Set time
1 hour
2 C
1 C
WEEKLY timer
ON and OFF timer can be combined, and up to 4 reservations (program
) per day and 2 reservations per week.
Before setting the program, please set the week and time of the air
conditioner rst.
If the week and time are not set, the weekly timer will not operate
correctly at the set time.
Please refer to "remote controller preparation" (page 2).
SLEEP
E ample of WEEKLY timer 1
(OFF)
Program
Monday to
7:00 ON 26 C
Friday
Wake up
Saturday
Program
Sunday
ON
9:00 OFF
E ample of WEEKLY timer 2
You can specify a given temperature in the ON setting in WEEKLY
timer.
Program
Program
7:00 ON 2 C
9:00 ON 26 C
* You can set the temperature for AUTO, COOL, and DRY modes within
the range of 1 30 C.
Notes:
Operations modes other than the temperature setting will be the
same at the last time operation was stopped, so Cooling
Cooling
Dry type of operations cannot be automatically set.
If you set the ON timer and OFF timer on the same time, the air
conditioner will run the ON timer. If two ON timer are set at the same
time, the air conditioner will run in the order of the program number.
If there is a power interruption, such as due to a power outage
during the WEEKLY timer setting or a circuit breaker cutting out,
the internal timer of the air conditioner will be incorrect. (See page
9 "Auto restart".) In such a case, the main timer lamp will notify you
9H
of this by ashing, so carry out matching of the time and date. (See
00M
page 2 "remote controller preparation".)
hours
You cannot use the WEEKLY timer together with the other timers.
If you want to run the product on WEEKLY timer after using the ON/
OFF Timer, Program Timer, or SLEEP Timer while the WEEKLY
timer is running, you need to activate the WEEKLY timer again.
Program
Program
9:00 OFF
17:00 ON 2 C
Leave for work
Come back home
No timer settings
Program
Program
ON
ON
ON
11:00 OFF
17:00 OFF
Program
Program
17:00 ON 27 C
23:00 ON 2 C
Program
23:00 OFF
Go to sleep
Program
23:00 OFF
Dry
(continued)
8/12/2013 8:53:48 AM
Hide quick links:
Table of Contents
