Page 1: Table Of Contents
DIGITAL RECORDER RS-232C COMMUNICATION CAPACITY OPERATION MANUAL MODEL DX-TL2500E series Contents Connecting to a personal computer Connecting to a personal computer ....2 2 2 2 2 Connecting to a personal computer Connecting to a personal computer ..Connecting to a personal computer ..
Page 2: Connecting To A Personal Computer
Connecting to a personal computer I Connecting with a personal computer This unit can be remote controlled from a PC equipped with a RS-232C connection. It is also possible to input comments from a PC for recording comment information along with the video. o Connection via modem Please use RS-232C Straight cable (9pin) to connect a modem with this unit.
Page 3: Command Codes
Command codes I RS-232C settings Communication related settings of this unit are made in “MODE” and “SETTINGS” of the screen. Perform settings so that they are the same as the connecting modem or PC. When remote controlling this unit from a PC, set “MODE” in the screen to “REMOTE A” , “RE- MOTE B”...
Page 4: False Operation Panel Command Type
Command codes (continued) o False operation panel command type Operations can be specified from a PC as if operating the actual operation panel of the unit while viewing the output video. Each command is a command type that corresponds to the operation button of the unit. •...
Page 5: Details Of The Numbers
Command codes (continued) o Details of the numbers : When the setting of DELIMITER on display is set to CR, carriage return code (0DH) will be input. If the setting is CR•LF, carriage return code (0DH) and line feed code (0AH) will be input. : When the setting of DELIMITER on ...
Page 6 Command codes (continued) • RS-232C [Direct operation specification] operation setting system command form General (2/3) Commands name Commands Status Notes **** : OUTPUT A switcher command OUTPUT A switcher SW**** ≤ RC ≥ EX,** SW**** ≥ 0100 : Single screen sequential 0101 : CH1 0102 : CH2 0103 : CH3...
Page 7 Command codes (continued) • RS-232C [Direct operation specification] operation setting system command form General (3/3) Commands name Commands Status Notes : Acquire the recorded period Acquire the recorded IF** ≤ RC ≥ period EX,** IF** 01 : MAIN 02 : SUB 03 : ARCHIVE 04 : CFC (10)
Page 8: Time Date/Display Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Commands name Commands Status Notes ***** TIME DATE ADJUST RC ≥ 00004 : YEAR 00005 : MONTH DW,***** ***** ≤...
Page 9: Mpx Display Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (1/3) Commands name Commands Status Notes OUTPUT A ***** SPLIT4(a) : SPLIT 4 SCREEN DW,***** ***** ≤ RC ≥ SETTING EX,** DW,*****...
Page 10 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (2/3) Commands name Commands Status Notes OUTPUT A ***** 00423 : SEQUENCE 1 00424 : SEQUENCE 2 SEQUENCE SETTING DW,***** ***** ≤...
Page 11 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (3/3) Commands name Commands Status Notes ***** OUTPUT B 1st row : SPLIT 16 SCREEN DW,***** ***** ≤ RC ≥...
Page 12: Motion Detection Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Commands name Commands Status Notes ***** DETECTION MASK 00533 ~ 00724 : CH1 00725 ~ 00916 : CH2 SETTING DW,***** *****...
Page 13: Record Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (1/2) Commands name Commands Status Notes RECORD SETTING ***** 03703 : CH1 03704 : CH2 03705 : CH3 03706 : CH4 (PPS) DW,***** *****...
Page 14 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (2/2) Commands name Commands Status Notes ***** ALARM SETTING 04238 ~ 04253 : ALARM 1 - RECORD CAMERA 1 ~ 16 (RECORDED CAMERA) DW,***** *****...
Page 15: Timer Program Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (1/5) Commands name Commands Status Notes ***** : 03702 SELECTED PATTERN for timer recording RC ≥ ***** DW,***** ***** ≤...
Page 16 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (2/5) Commands name Commands Status Notes ***** RECORD SETTING A ~ D (PPS) RC ≥ 03982 : A-CH1 03983 : A-CH2 03984 : A-CH3 03985 : A-CH4...
Page 17 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (3/5) Commands name Commands Status Notes RECORD SETTING ***** 04174 : A-CH1 04175 : A-CH2 04176 : A-CH3 04177 : A-CH4 A ~ D (A-GRADE) DW,*****...
Page 18 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (4/5) Commands name Commands Status Notes ***** ALARM SETTING A ~ D (RECORDED CAMERA) RC ≥ ALARM SETTING A : DW,***** ***** ≤...
Page 19 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (5/5) Commands name Commands Status Notes ***** ALARM SETTING A ~ D (TRIGGER) RC ≥ ALARM SETTING A : DW,***** ***** ≤...
Page 20: Initial Set Up/Information
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (1/2) Commands name Commands Status Notes ***** : 05709 HDD REPEAT REC MAIN DW,***** ***** ≤ RC ≥ ***** DW,***** *****...
Page 21 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (2/2) Commands name Commands Status Notes HDD MAIN FULL ***** : 05724 ***** : 00000 : OFF 00001 : ON DW,***** ***** ≤...
Page 22: Search
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form Refer to the “Playback” of [Direct operation specification] operation setting system command form “General” for search execution. Commands name Commands Status Notes TIME DATE SEARCH ***** : Search time ...
Page 23: Copy>,
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form , Commands name Commands Status Notes ***** : 06016 COPY, RESTORE DETECTION DW,***** ***** ≤ RC ≥ ***** EX,** DW,***** ***** ≥...
Page 24: Another Settings
Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (1/2) Commands name Commands Status Notes HDD SETTING ***** : 06401 ***** DR,***** ≤ RC ≥ 00000 : NORMAL 00001 : MIRRORING EX,** DR,*****...
Page 25 Command codes (continued) • RS-232C [Direct operation specification] menu setting system command form (2/2) Commands name Commands Status Notes (11) : Archive condition Check the condition MD? ≤ RC ≥ (26) (continued) EX,** MD** ••• ** **** 00 : Stop 01 : Start (from Stop) 02 : Execution (25)
Page 26: Rs-232C Warning Display
Command codes (continued) • RS-232C Warning display (1/2) Status Notes Commands name Commands (32) Check the warning WN1? ≤ RC ≥ ••• * : 0 : No error display 1 : Error display (33) (31) (32) : SYSTEM ERROR : TEMP display EX,** WN1*...
Page 27 Command codes (continued) • RS-232C Warning display (2/2) Commands name Commands Status Notes Check the condition RC ≥ : Playback condition MD? ≤ (26) 00 : Stop 01 : Start (from Stop) (continued) EX,** MD** ••• ** **** (25) 02 : Start (from execution) 03 : Playback (single screen) •••...
Page 28: Rs-232C [False Operation Panel] Command Form
Command codes (continued) • RS-232C [False operation panel] command form Commands name Commands Status Notes POWER button (Power on/off) POWER KKP0 ≤ RC ≥EX,** KKP0 ≥ RC ≥EX,** KKP1 ≥ Power on for change mode KKP1 ≤ Power on for Auto set up KKP2 ≤...
Page 29: Rs-232C Status Condition Change Information System
Command codes (continued) • RS-232C Status condition change information system Commands name Status Notes System mode **** EX,AA,**** ≥ 0100 : Power off 0101 : System change 0104 : Power on 0107 : menu 0108 : menu 0109 : menu 010A : Device unusual situation 010B : Device initialize 010C : Device reconstruction...
Page 30: Character Code List
Command codes (continued) o Character code list (When LANGUAGE is selected to except for “PìCCKàâ”.) Character (Space) " & Character code 00012 00032 00033 00034 00035 00036 00037 00038 00039 00040 00041 00042 00043 Character < > Character code 00058 00059 00060 00061...
Page 31: Comment Search Comment Search
Comment search Characters (character strings) inputted from a PC connected to this unit by RS-232C connection can be recorded as comments along with the video/audio. Recorded comments can be displayed during playback. Furthermore, recorded comments can be specified for search so that the video with the comment can be played back from the beginning. I Comment search command code Commands name Commands...

Mitsubishi Electric DX-TL2500E series Operation Manual

Quick Links

Related Manuals for Mitsubishi Electric DX-TL2500E series

Summary of Contents for Mitsubishi Electric DX-TL2500E series

Table of Contents