HP 5660-97 Specifications Information And Repair Parts Manual

1-inch self-priming centrifugal pumps low volume liquid transfer bronze

Quick Links

Specifications Information and
Repair Parts Manual
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to
assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. The Safety
Instructions are contained in the General Operating Instructions. Failure to comply with the safety instructions accompanying this product
could result in personal injury and/or property damage! Retain instructions for future reference.
1-Inch Self-Priming Centrifugal Pumps
Low Volume Liquid Transfer Bronze
Refer to form 1808-634-00 for General Operating and Safety Instructions.
Description
These self-priming (to 6 ft. lift) centrifugal pumps are designed for continuous
duty, general purpose liquid transfer. Applications include livewell recirculation,
marine air conditioning, and salt water aquaculture. Pumps feature bronze
construction, Buna N seals, and a semi-open clog resistant impeller capable of
handling solids to 1/8" diameter. Handle liquids from 40º F to 180º F (4º C to
82º C). Maximum working pressure 75 psi (517 kPa). Single phase motors have
automatic reset thermal protection. All models are manual mode and require field
wiring, no controls are supplied (see motor nameplate for specific wiring diagram).
For use with nonflammable, non-abrasive liquids compatible with pump
component materials.
Figure 1 - Dimensions
Dimensions (Inches)
Model
Suc.* Dis.*
5660-97
1"
1"
5661-97
1
1
5662-97
1
1
5664-97
1
1
5665-97
1
1
5666-97
1
1
5667-97
1
1
5669-97
1
1
(*) Standard NPT (female) pipe thread.
(†) This dimension may vary due to motor manufacturer's specifications.
5660-250-00
CP
Discharge
F
CP†
D
E
14.11
3.50
2.25
14.61
3.50
2.25
15.11
3.50
2.25
16.09
3.50
2.25
15.53
3.50
2.25
16.03
3.50
2.25
16.41
3.50
2.25
17.66
3.50
2.25
Y
Suction
X
S
D
L
E
F
H
L
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
3.00
0.44
4.28
5660-97 thru 5669-97
H
E
S
X
4.00
5.25
4.00
5.25
4.00
5.25
4.00
5.25
4.00
5.25
4.00
5.25
4.00
5.25
4.00
5.25
Y
3.94
3.94
3.94
3.94
3.94
3.94
3.94
3.94
09/2002
loading

Summary of Contents for HP 5660-97

  • Page 1 2.25 3.00 0.44 3.50 2.25 3.00 0.44 3.50 2.25 3.00 0.44 3.50 2.25 3.00 0.44 3.50 2.25 3.00 0.44 5660-97 thru 5669-97 4.28 4.00 5.25 4.28 4.00 5.25 4.28 4.00 5.25 4.28 4.00 5.25 4.28 4.00 5.25 4.28 4.00 5.25 4.28...
  • Page 2: Specifications

    7/16" wrench across flats. 4. Unthread fasteners (Ref. No. 6) and remove motor adapter (Ref. No. 4). Seal head and impeller shims (Ref. No. 11) will come loose at this time. 5660-97 thru 5669-97 PUMP Ship Weight Casing Adapt.
  • Page 3 Specifications Information and Repair Parts Manual Models 5660-97 thru 5669-97 Maintenance (Continued) 11. Using a clean cloth, wipe shaft and make certain that it is perfectly clean. NOTE: If removed, slide slinger washer (Ref. No. 2) onto shaft until it is located approximately 1/8"...
  • Page 4: Repair Parts List

    Part Number For Models: 5660-97 (1/2HP) 5665-97 (1/2HP) 1626-009-00 1626-068-00 1534-000-00 1993-000-01 2104-003-02 2104-004-00 1640-161-90 1640-161-90 1657-000-90 2104-006-01 2218-006-01 5660-97 thru 5669-97 5661-97 (3/4HP) 5662-97 (1HP) 5664-97 (2HP) 5666-97 (3/4HP) 5667-97 (1HP) 5669-97 (2HP) 1626-010-00 1626-011-00 1626-024-00 1626-051-00 1626-069-00 1626-070-00 1534-000-00...

This manual is also suitable for:

5661-975662-975664-975665-975666-975667-97 ... Show all