Quick Links
QuickSpecs
M
O D E L S
Low Voltage Modular PDU Model, 100 – 127 VAC
24A Model – mPDU, 24A, Low
252663-D71 (NA/LA/JPN)
High Voltage Modular PDU Model(s), 200 – 240 VAC
16A Model – mPDU, 16A, High
252663-B24 (WW)
24A Model – mPDU, 24A, High
252663-D72 (NA/LA/JPN)
32A Model – mPDU, 32A, High
252663-B31 (INT'L)
40A Model – mPDU, 40A, High
252663-B21 (WW)
Feature List
Single input power distribution units with a unique modular design architecture
Up to 32 outlet receptacles
Zero-U/1U dense rack form factor
Easily accessible outlet receptacles and improved cable management
Models range from 16A-40A
DA-11041
World Wide — Version 3 — December 11, 2002
hp Modular Power Distribution Units
(Zero-U/1U Modular PDUs)
1
Related Manuals for HP 16A
Summary of Contents for HP 16A
- Page 1 Low Voltage Modular PDU Model, 100 – 127 VAC 24A Model – mPDU, 24A, Low 252663-D71 (NA/LA/JPN) High Voltage Modular PDU Model(s), 200 – 240 VAC 16A Model – mPDU, 16A, High 252663-B24 (WW) 24A Model – mPDU, 24A, High 252663-D72 (NA/LA/JPN) 32A Model –...
- Page 2 The Control Unit is zero-U or 1U rack mountable. And the Extension Bars mount directly to the rack-frame or the rack extension unit. With each Modular PDU, you can get up to 32 outlet receptacles (except for the 16A and 40A models) in zero-U of rack space. And if you plan to mount two Modular PDUs in one rack (typical configuration), you could get up to 64 output receptacles, without having to use any rack U-space.
- Page 3 Current Ratings from 16A to 40A Modular PDUs are available in a wide range, including four high volt models ranging from 16A to 40A current ratings; and one low voltage 24A model. Compatibility Ideal for use with the HP 9000 and 10000 Series Racks, the Modular PDUs are largely designed for the dense rack environment.
-
Page 4: P D U S P E C I F I C A T I O N S
All models ship with: High voltage models ship with two 10A, IEC320 -C14 to IEC 320 -C13 jumper cables, each 4.5ft/1.37m long. In addition, the 16A model ships with one 16A, IEC 320-C19 to IEC 320-C20 jumper cord, 8.2ft/2.5m long. DA-11041 World Wide —... - Page 5 C19 (12A ea) Note: Manual ON/Off control provided for each load group; switch guards provided to prevent inadvertent power Off. The Control unit for the 16A model has 2 outputs while the Control Unit for all other Modular PDUs has 4 outputs. The Extension Bars plug directly into the output-ends of the Control Unit.
- Page 6 PN 340653-001 (IEC320- C19 to L6-20P), is needed to connect a 16A mPDU to the NA high voltage model of the UPS R3000 XR Also connects directly into the facility input...
- Page 7 Remote Insight Lights-Out Edition (RILOE) power Y-cable has been designed for plugging into HP PDUs. One single Y-cable supports two RILOE cards, which reduces the number of plugs required on the PDU for connecting the RILOE cards.