Related Manuals for HP 7500 PCI
Summary of Contents for HP 7500 PCI
-
Page 1: Ati Radeon 7500 Pci Graphics Controller
ATI RADEON 7500 PCI Graphics Controller Installation Guide First Edition Revision A Revision A Manufacturing Part Number: AB551-96002 – April 2005 © Copyright 2004-2005 Hewlett-Packard Development Company, L.P. -
Page 2: Legal Notices
Legal Notices Copyright Notices. © Copyright 2004-2005 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express limited warranty statements accompanying such products and services. -
Page 3: Table Of Contents
Connector Pinouts... 3 INSTALLATION...5 Introduction... 5 Unpacking ... 5 Installation Procedure... 5 HP OPENVMS I64 – GRAPHICS SOFTWARE INSTALLATION AND CUSTOMIZATION...7 Video Resolutions Supported ... 7 Restrictions, Limitations and Defaults ... 8 Minimum Console Revision... 8 No VGA Console Support ... 8 HP Integrity Platform Slot Restrictions... - Page 4 ATI RADEON 7500 PCI Graphics Controller Installation Guide Default Visual Information ... 18 Configuring Graphics Resolution or Vertical Refresh Rate for HP-UX ... 19 Current Graphics Resolution ... 19 How to Change the Resolution and Refresh Rate... 19 Multihead Support... 20 Dual-screen...
- Page 5 Related Information • Printing History Intended Audience This manual is for managers and operators of HP AlphaServer systems with ATI RADEON 7500 PCI graphics controllers. Document Structure This manual has the following chapters. Chapter 1, Overview, provides a brief overview of the ATI RADEON 7500 PCI graphics controllers.
- Page 6 All comments are appreciated. Related Information Visit the HP Web site at www.hp.com for service tools and more information about ATI RADEON 7500 PCI graphics controller. You can find other information on HP server hardware management, Microsoft® Windows®, and diagnostic support tools in the following publications.
- Page 7 ATI RADEON 7500 PCI Graphics Controller Installation Guide Diagnostics and Event Monitoring: Hardware Support Tools Complete information about HP’s hardware support tools, including online and offline diagnostics and event monitoring tools, is at the http://docs.hp.com/hpux/diag/ Web site. This site has manuals, tutorials, FAQs, and other reference material.
-
Page 8: Overview
1 Overview Introduction This chapter provides a brief overview of the ATI RADEON 7500 PCI graphics controller. Module Description The ATI RADEON 7500 PCI graphics controller/accelerator module is a single expansion-slot 32 bit, 66/33 MHz Universal PCI option that provides 2D and 3D graphics acceleration for supported HP systems running HP OpenVMS I64 and 2D for supported HP-UX systems The ATI RADEON 7500 graphic card is based on ATI’s RV200 graphics chip. -
Page 9: Ati Radeon 7500 Pci Graphics Controller
DVI to analog (VGA) adapter or cable (this part was supplied on the AlphaServer version of the card, but is not supplied for HP Itanium). If a DVI to analog adapter or cable is used, OpenVMS drives both the VGA and DVI interface with the same image. -
Page 10: Connector Pinouts
ATI RADEON 7500 PCI Graphics Controller Installation Guide Connector Pinouts Table 1-2 contains a listing of the pins and signals found on the standard 15-pin VGA connector and the DVI-I to VGA adaptor (part number 209815-001 not included in kit). - Page 11 Overview ATI RADEON 7500 PCI Graphics Controller Installation Guide This Page Intentionally Left Blank Chapter 1...
-
Page 12: Installation
NOTE: Before installing the module, check your monitor specification for signal compatibility and supported features offered by the ATI RADEON 7500 PCI graphics controllers. The following section describes how to install the ATI RADEON 7500 PCI graphics controller. To install the module, perform the following steps: 1. - Page 13 12. Perform a normal power-up of your computer system. 13. If the system is an HP-UX system, you must switch the system console over to a serial console. See “Changing the Boot Console” on page 16.
-
Page 14: Hp Openvms I64 - Graphics Software Installation And Customization
Installation and Customization This chapter provides information for installing and modifying the software required to support 2D and 3D graphics with the ATI RADEON 7500 PCI graphics controller under the HP OpenVMS I64 operating system. The ATI RADEON 7500 PCI graphics controller is directly supported by OpenVMS I64 without additional software. -
Page 15: Restrictions, Limitations And Defaults
Management Processor attached device is required. HP Integrity Platform Slot Restrictions The Version V8.2 release of OpenVMS supports three HP Itanium platform types: The RX1600, RX2600 and RX4640 (along with speed and CPU variants). The following are the known restrictions on populating slots with ATI RADEON 7500 cards: •... -
Page 16: Multiple Colormaps (8 Bits Per Pixel)
ATI RADEON 7500 PCI Graphics Controller Installation Guide Multiple Colormaps (8 Bits Per Pixel) Multiple colormaps are not supported by the hardware. The ATI RADEON 7500 PCI graphics controllers support only one installed colormap at one time. Exceeding this limit in 8 bits per pixel depth, may cause colormap ‘flashing’, also known as "Technicolor". -
Page 17: Transformation, Clipping And Lighting Support
(TCL) hardware of the RADEON 7500 for increased primitive rendering performance. The embedded graphics typically found on HP Integrity systems is based on the ATI RADEON 7000, and also provides 3D capability, but does not have TCL hardware capability. -
Page 18: Screen Order And Forcing Single Headed Operation
A complete list of available DECwindows Motif V1.3-1 documentation is available at: http://h71000.www7.hp.com/DOC/decwin131.html For newer releases of documentation, check the main HP OpenVMS Systems Documentation site at: http://h71000.www7.hp.com/doc/index.html OpenVMS Alpha and I64 use the same implementation of X11 and Motif and documentation for one generally applies to the other, unless otherwise noted. -
Page 19: Server Startup And Configuration Messages
$ @SYS$MANAGER:DECW$STARTUP RESTART The new file settings will now override the original default settings. NOTE: By renaming this template file to .COM you will enable multi-head operation. Many HP Integrity servers provide an embedded graphics option (currently based on the ATI RADEON 7000). -
Page 20: Troubleshooting
ATI RADEON 7500 PCI Graphics Controller Installation Guide More extensive logging of server events can be enabled by modifying the DECW$PRIVATE_SERVER_SETUP.COM DCL procedure and setting: $ DECW$SERVER_AUDIT_LEVEL == “n” Where n is a value between 0 and 4 (with 0 being none, and 4 being high). - Page 21 HP OpenVMS I64 – Graphics Software Installation & Customization ATI RADEON 7500 PCI Graphics Controller Installation Guide Problem Visual noise or anomalies on the screen Description Flashes of dots, or other random artifacts on the screen Solution resolution and refresh rate being...
-
Page 22: Hp-Ux Configuration
This chapter describes how to configure the ATI RADEON 7500 graphics controller in a system running the HP-UX operating system. NOTE: Chapter 4 pertains to the HP-UX operating system only; if you are running the OpenVMS operating system, see Chapter 3 The examples in this manual show version numbers applicable at publication. -
Page 23: Changing The Boot Console
HP-UX Configuration ATI RADEON 7500 PCI Graphics Controller Installation Guide Changing the Boot Console When an ATI RADEON 7500 is installed in the system, the only supported console is the serial console. Use the following instructions to switch the console to the serial device. -
Page 24: Verification Of Hardware Installation
ATI RADEON 7500 PCI Graphics Controller Installation Guide Verification of Hardware Installation After the ATI RADEON 7500 graphics controller has been installed and the system has rebooted, verify the graphics card was correctly installed and identify which device file corresponds to which card. -
Page 25: Resolutions
HP-UX Configuration ATI RADEON 7500 PCI Graphics Controller Installation Guide Resolutions ATI RADEON 7500 graphics controllers can support various graphics resolutions and refresh rates as shown in Table 4-1. In addition to these standard resolutions and refresh rates, the ATI RADEON 7500 graphics controller will also support any resolutions and refresh rates that are supported by the specific monitor that it is connected to the ATI RADEON 7500 card. -
Page 26: Configuring Graphics Resolution Or Vertical Refresh Rate For Hp-Ux
ATI RADEON 7500 PCI Graphics Controller Installation Guide Section “Screen” Identifier “Screen 0” DefaultDepth 24 […] SubSection “Display” Depth 24 […] EndSubSection SubSection “Display” Depth 8 […] EndSubSection EndSection The following lines will select an 8-bit default depth visual: Section “Screen”... -
Page 27: Multihead Support
HP-UX Configuration ATI RADEON 7500 PCI Graphics Controller Installation Guide Multihead Support Multihead support is provided through changes to the Xserver’s configuration file which is located at /etc/X11/XF86Config. In order to do this correctly, you will need to know which device files to use. See “Verification of Hardware Installation”... - Page 28 ATI RADEON 7500 PCI Graphics Controller Installation Guide Section Screen Identifier “Screen 0-1” Device “ATI Radeon 7500 QW(0) Connector 1” Monitor “Monitor 0” # Include other Screen info here, including other SubSections EndSection Section Screen Identifier “Screen 0-2” Device “ATI Radeon 7500 QW(0) Connector 2 Monitor “Monitor 0”...
-
Page 29: Messages
HP-UX Configuration ATI RADEON 7500 PCI Graphics Controller Installation Guide Messages Xserver messages are typically logged to /var/X11/Xserver/logs. The two files that contain the messages are: /var/X11/Xserver/logs/Xf86.*.log /var/X11/Xserver/logs/Xstartup.*.log Where * is the display instance of the Xserver, which is usually 0. The Xstartup.*.log file contains messages from the X loader.