Honeywell PCR11ELW User Manual

Atomic projection clock with temperature

Quick Links

INTRODUCTION
Thank you for selecting the Honeywell Atomic Projection Clock
with Temperature. This device includes precise time keeping,
alarm, moonphase, temperature monitoring and projection
features that you can use from the comfort of your home.
In this package you will find:
¥ Atomic Projection Clock with Temperature
Atomic Projection Clock
¥ AC/DC adaptor
Please keep this manual handy as you use your new item. It
with Temperature
contains practical step-by-step instructions, as well as technical
specifications and precautions you should know.
(PCR11ELW)
USER MANUAL
loading

Summary of Contents for Honeywell PCR11ELW

  • Page 1 INTRODUCTION Thank you for selecting the Honeywell Atomic Projection Clock with Temperature. This device includes precise time keeping, alarm, moonphase, temperature monitoring and projection features that you can use from the comfort of your home. In this package you will find: ¥...
  • Page 2 * Current time image is projected onto the wall or ceiling in bright red digits. * Precise time and date are set via RF signal from the US Atomic Clock in Colorado. * US map with designated Time Zones * Projected image rotation, flip and focus control...
  • Page 3 Connect AC/DC adapter as shown below. Battery compartment Use 2 X AA, 1.5V batteries and AC-DC adapter (AC120V, 60Hz-DC3V, 100mA) included. Important: Please make sure your household voltage matches the voltage supported by the adapter, or it will damage your clock and adapter.
  • Page 4: Getting Started

    2,000 miles away. Due to the nature of the Earth’s ionosphere, reception can be limited during the daylight hours. The radio controlled clock will search for an alternate station that derives its signal from the NIST Atomic clock in Boulder, Colorado.
  • Page 5 DISPLAYING TEMPERATURE AND ALARMS *Press MODE to display the ALARM 1 time: *Press MODE again to display the Alarm 2 time: *Press MODE the third time to display the Temperature: SETTING TIME AND DATE MANUALLY The time piece date and time can be set by pressing and holding the MODE buttons for 3 seconds in Time/Temperature display with the atomic time receiver disabled.
  • Page 6: Setting Alarms

    SETTING 12 OR 24 HOUR TIME FORMAT *Pressing "+" will display time in 12 or 24 hour format. N.B.:1. If no key pressed within 30 seconds, the clock returns to the Time / Temperature Display setting. 2. During any programming press and hold UP [+] or DOWN [–] key for 2 seconds for faster scrolling through the digits.
  • Page 7 Mountain time Central time Press MODE to confirm the selected Time Zone EL Backlight ON / OFF (PCR11ELW) * Press top button 1 [LIGHT / SNOOZE] key-light and EL backlight will come on and turns off after 5 seconds. Projection Light and Adjustment * Press button 1 [LIGHT / SNOOZE]- projection light will come on and turn off after 5 seconds.
  • Page 8: Specifications

    : ˚C or ˚F Temperature update interval Indoor Temperature : every 15 seconds Calendar and Clock 12/24 hour display in hh : mm format Date Format: Month – Day format Day of week: User- selectable in 3 languages (English, French, Spanish)
  • Page 9: Standard Warranty Information

    Hideki Electronics, Inc. reserves the right to repair or replace the product at our option. Copyright (2005) Hideki Electronics Inc. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell Intellectual Properties Inc. Honeywell International Inc. makes no representations or warranties with respect to this product.