Related Manuals for HP TFT7600 G2
Summary of Contents for HP TFT7600 G2
- Page 1 HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console User Guide Abstract This guide provides operational guidance for the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console. Part Number: 615930-003 June 2012 Edition: 3...
- Page 2 © Copyright 2010, 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Table Of Contents
ENERGY STAR compliant ......................... 6 Installation ........................... 7 Kit contents ............................... 7 Installing the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console ............7 Connecting and routing cables ......................... 11 Accessing the HP TFT7600 KVM Console ....................12 Removing the HP 1U Adjustable Toolless Rails .................... 13 Removing PS2 cables with cable-locking mechanism .................. - Page 4 Electrostatic discharge ......................... 27 Preventing electrostatic discharge ......................27 Grounding methods to prevent electrostatic discharge .................. 27 Support and other resources ......................28 HP contact information ..........................28 Acronyms and abbreviations ......................29 Documentation feedback ......................30 Index ............................31...
-
Page 5: Introduction
Display release latch Pushes down to unlatch the display assembly Blue LED • Turns on when the display is closed • Helps identify the HP TFT7600 KVM Console in a rack OSD activation button • Launches OSD menus • Selects •... -
Page 6: Rear Components
PS2 keyboard port PS2 mouse port VGA input port Power connection port Serial firmware port ENERGY STAR compliant The HP TFT7600 KVM Console is ENERGY STAR® qualified. For more information about the ENERGY STAR® qualifications, see the HP website (http://www.hp.com/hpinfo/globalcitizenship/environment/products/ecolabels.html). Introduction 6... -
Page 7: Installation
Installing the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap them into place. Snap one end of the HP 1U Adjustable Toolless Rails into the retna rails. - Page 8 Extend the inner slides until they lock into place. Align the unit with the extended inner slides, and then insert the unit into the rack. Installation 8...
- Page 9 From the rear of the rack, slide the brace rail assembly in between the HP 1U Adjustable Toolless Rails. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolless Rails. Using two 6-32 screws, secure the brace rail to the HP 1U Adjustable Toolless Rails.
- Page 10 Remove and discard the two shipping screws from the rear of the unit. Attach the cable management arm to the rear of the unit with two 6-32 screws. Installation 10...
-
Page 11: Connecting And Routing Cables
Installation is complete. Connecting and routing cables When connecting and routing the cables through the cable management arm and cable tray to the HP TFT7600 KVM Console, use the following cable-routing method to ensure that the cables fit into the tray. -
Page 12: Accessing The Hp Tft7600 Kvm Console
Description Power cable VGA cable USB keyboard/mouse cable USB pass-through cable Accessing the HP TFT7600 KVM Console Gently extend the HP TFT7600 KVM Console until the slides lock. Push the display release latch, and then lift the display. Installation 12... -
Page 13: Removing The Hp 1U Adjustable Toolless Rails
Removing the HP 1U Adjustable Toolless Rails Locate the spring release. Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring release. Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable Toolless Rails out toward you and away from the rack (2). -
Page 14: Enabling The Native Display Resolution Of 1440X900 In Hp-Ux
To fix issues related to wide screen panels, verify that you have at least one of the following server patches (or newer) installed: • PHSS_40809 (11.31) • PHSS_40810 (11.23) For more information about setting resolutions in HP-UX, see the Graphics Administration Guide for HP-UX 11.x servers on the HP website (http://docs.hp.com/en/5900-0585/5900-0585.pdf). Installation 14... -
Page 15: Operational Overview
Operational overview On-screen display The OSD buttons are used to operate the HP TFT7600 KVM Console OSD menus. Callout Component Function OSD activation button • Launches OSD menus • Selects menu options • Exits menus and OSD OSD scroll up and down button... -
Page 16: Osd Menu
Press the OSD activation button to select the Exit function and exit the OSD menu. OSD menu The OSD menu provides access to display settings and functions, enabling the user to customize the HP TFT7600 KVM Console display settings. Brightness/Contrast The Brightness/Contrast option contains the following options: •... -
Page 17: Advanced
Vertical position The V position option displays a slider bar to enable the adjustment of the screen's vertical position. The center of the bar is obtained from the factory-preset value for Vertical Position. Clock The Clock option displays a slider bar to enable the adjustment of the Horizontal Clocks. Phase The Phase option displays a slider bar to enable the adjustment of the analog signals phase. -
Page 18: Auto Configuration
Auto Clock—Automatically adjusts the output clock per line to match the input Factory settings The Factory settings option enables the user to set the HP TFT7600 back to its original factory settings. The following options are available in the Factory settings menu list: •... -
Page 19: Maintenance
Do not attempt to service this product yourself. Adjust only those controls that are covered by the operating instructions. If the unit is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. Cleaning the monitor To clean the display: Turn off and unplug the unit. -
Page 20: Shipping Instructions
Shipping instructions Keep the original packing box in a storage area in case you must move or ship your HP TFT7600 KVM Console. Moving a rack with the HP TFT7600 KVM Console installed When moving the HP TFT7600 KVM Console installed in a rack, HP recommends that you install the lock plates, included in your kit, on each side of the unit and rack. -
Page 21: Regulatory Compliance Notices
Regulatory compliance notices Regulatory compliance identification numbers For the purpose of regulatory compliance certifications and identification, this product has been assigned a unique regulatory model number. The regulatory model number can be found on the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to this regulatory model number. -
Page 22: Declaration Of Conformity For Products Marked With The Fcc Logo, United States Only
Hewlett-Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 • 1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded or monitored.) For questions regarding this FCC declaration, contact us by mail or telephone: • Hewlett-Packard Company P. -
Page 23: European Union Regulatory Notice
Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family and available (in English only) either within the product documentation or at the following HP website (http://www.hp.eu/certificates) (type the product number in the search field). -
Page 24: Japanese Notice
Japanese notice BSMI notice Korean notice Class A equipment Class B equipment Regulatory compliance notices 24... -
Page 25: Chinese Notice
Chinese notice Class A equipment China energy regulations Disposal of waste equipment by users in private households in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. -
Page 26: Power Cord Statement For Japan
Power cord statement for Japan Regulatory compliance notices 26... -
Page 27: Electrostatic Discharge
Electrostatic discharge Preventing electrostatic discharge To prevent damaging the system, be aware of the precautions you need to follow when setting up the system or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards or other static-sensitive devices. -
Page 28: Support And Other Resources
For United States and worldwide contact information, see the Contact HP website (http://www.hp.com/go/assistance). In the United States: • To contact HP by phone, call 1-800-334-5144. For continuous quality improvement, calls may be recorded or monitored. • If you have purchased a Care Pack (service upgrade), see the Support & Drivers website (http://www8.hp.com/us/en/support-drivers.html). -
Page 29: Acronyms And Abbreviations
Acronyms and abbreviations keyboard, video, and mouse on-screen display rackmount keyboard monitor thin film transistor universal serial bus Acronyms and abbreviations 29... -
Page 30: Documentation Feedback
Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (mailto:[email protected]). Include the document title and part number, version number, or the URL when submitting your feedback. -
Page 31: Index
Federal Communications Commission (FCC) OSD menu 16 notice 21, 22 OSD position 17 OSD settings 17 OSD, launching 15 grounding methods 27 Phase adjust 16, 17 Horizontal Position 16 power cord 25, 26 HP website 28 PS/2 devices 13 Index 31... - Page 32 6 regulatory compliance notices 21, 25 Removing the Brace Rail Assembly 13 removing the HP 1U Adjustable Toolless Rails 13 removing the unit 13 shipping the unit 20 technical support 28 telephone numbers 28 Vertical Position 17 website, HP 28...