Table of Contents
Quick Links
See also:
User Manual
Table of Contents
Related Manuals for Toshiba NVS8-X
Summary of Contents for Toshiba NVS8-X
-
Page 1: User Manual
Network Video Recorder User Manual NVS8-X model no. NVS16-X NVS32-X Please carefully read these instructions before using this product. Save this manual for future use. - Page 3 This software and documentation are copyrighted. All other rights, including ownership of the software, are reserved to DVR Support Center. TOSHIBA, and Surveillix are registered trademarks of TOSHIBA CORPORATION in the United States and elsewhere; Windows, and Windows XP Embedded are registered trademarks of Microsoft Corporation.
-
Page 4: Limited Warranty
During this period, ISD will repair or replace a defective product or part with a new or refurbished item. The user must deliver the entire product to the Surveillix DVR Repair Facility. -
Page 5: Important Safeguards
IMPORTANT SAFEGUARDS Read Owner’s Manual – After unpacking this product, read the owner’s manual carefully, and follow all the operating and other instruction Power Sources – This product should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home or business, consult your product dealer or local power company Ventilation –... -
Page 6: Battery Explosion Caution Statement
IMPORTANT SAFEGUARDS, continued Damage Requiring Service – Unplug the unit from the outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. -
Page 7: Notes On Maintenance
NOTES ON CLEANING Use a soft dry cloth for cleaning. For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage the surface of the DVR. If using a chemical saturated cloth to clean the unit, follow that product’s instructions. - Page 8 viii WARNING TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION C A U T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,...
-
Page 9: Rack Mount Instructions
RACK MOUNT INSTRUCTIONS Elevated Operating Ambient – If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer. - Page 10 CE NOTICE This product is in conformity with the following European Directives: ELECTROMAGNETIC COMPATIBILITY DIRECTIVE, 89/336/EEC (as amended by 92/31/EECand by Article 5 of 93/68/EEC) per the provisions of: EN55022:2006 EN61000-4-2:1995+A1+A2:2001 EN61000-4-6:1996+A1:2001 EN61000-4-8:1994+A1:2001 EN55024:1998+A1:2001+A2:2003 EN61000-4-3:1995+A1:2002 EN61000-3-2:2006 EN61000-4-4:1995+A1+A2:2004 EN61000-4-11:2004 EN61000-3-3:1995+A1:2001+A2:2005 EN61000-4-5:1995+A1:2001 LOW VOLTAGE DIRECTIVE, 73/23/EEC (as amended by Article 13 of 93/68/EEC) per the provisions of:...
-
Page 11: Table Of Contents
Table of Contents PREFACE ..................................15 ABOUT THIS GUIDE .............................. 15 TECHNICIAN NOTES ............................. 15 INTRODUCTION ................................17 PRODUCT DESCRIPTION ............................. 17 FEATURES ................................17 CONTROLS AND CONNECTIONS ..........................19 BASIC FEATURES ..............................20 ... - Page 12 Locating the System ID ..........................41 Obtaining the Unlock Code ..........................41 Unlocking the Upgrade ..........................42 Unlocking New Network Device .......................... 42 MOTION SETUP ..............................43 Create a Motion Area ............................43 Activating an Alarm on a Motion Event .......................
- Page 13 xiii Alarm Event ..............................61 INSTANT RECORDING ............................62 Activate Instant Recording ..........................62 Searching ‘Instant Recorded’ Video ........................62 SEARCH ..................................63 SEARCH OVERVIEW ............................. 64 Play Controls ..............................64 Adjust the Brightness of an Image ........................65 ...
- Page 14 WEB VIEWER ................................85 WEB VIEWER OVERVIEW ............................. 86 Configuring the Server for Remote Connection ....................87 Connecting to a DVR Using Web Viewer ......................87 Closing the Web Viewer ............................. 87 INCLUDED SOFTWARE SETUP ..........................89 ...
-
Page 15: Preface
PREFACE ABOUT THIS GUIDE This manual is a setup and maintenance guide that can be used for reference when setting up the NVS unit and for troubleshooting when a problem occurs. Only authorized personnel should attempt to repair this unit. Toshiba reserves the right to make changes to the NVS units represented by this manual without notice. -
Page 17: Introduction
PRODUCT DESCRIPTION A Surveillix NVS is simply a server that performs as a High Definition Digital Recorder. By utilizing the many features of a computer, including processing power, storage capacity, graphics compression, network cameras and security features, the NVS unit is more powerful than the analog recorders of the past with its ability to utilize digital network cameras. -
Page 19: Controls And Connections
CONTROLS AND CONNECTIONS This chapter includes the following information: • Input/Output connector locations • Front Panel Controls and LEDs • Rear Panel Connectors... -
Page 20: Basic Features
BASIC FEATURES Surveillix™ state-of-the-art High Definition Digital Recorders are housed in a high performance and versatile 4U Aluminum Rack- Mount case allowing easy storage of multiple NVS’ for enterprise applications. Every Surveillix NVS Unit comes equipped with the latest technology: •... -
Page 21: Front Panel Controls And Leds
FRONT PANEL CONTROLS AND LEDS The front panel of the NVS unit contains the devices that will be commonly used for data removal, retrieval, and backup replacement. The most common components and buttons are shown below. Hard Drive Activity & DVD±RW Drive Hard Drive Array Power LEDs... -
Page 22: Rear Panel Connectors
REAR PANEL CONNECTORS The rear panel of the NVS unit contains virtually all of the connectors you will be using. Below is a diagram that outlines the location and description of each connector: SVGA Monitor Out Fire Wire S-Video Out 1394 DVI-D Audio... -
Page 23: Getting Started
GETTING STARTED This chapter includes the following information: • Included Components Setting up your NVS Hardware • Optional Components •... -
Page 24: Identifying Included Components
IDENTIFYING INCLUDED COMPONENTS Surveillix™ NVS systems come with a mouse, keyboard and selected software and cables. Identify the following components to make sure everything has been properly included with your new NVS unit. If any of the following items are missing, contact your dealer to arrange a replacement. -
Page 25: Keyboard Setup
KEYBOARD SETUP To attach the keyboard to the DVR unit, plug the end of the Keyboard into the keyboard PS/2 Port located on the back of the machine. The keyboard PS/2 Port can be identified by the purple color. Refer to the Rear Panel Connectors diagram for more information. MOUSE SETUP To attach the mouse to the DVR unit, plug the end of the mouse into the mouse PS/2 Port located on the back of the machine. -
Page 26: Monitor Setup
MONITOR SETUP There are 2 available connections for monitors which can be used individually or in tandem. SVGA Output To VGA Monitor. DVI-D Output To TV / Digital Monitor Attach the monitor or monitors to the rear of the NVR using the cable supplied by the monitor manufacturer. Refer to the monitor manual for detailed information on how to setup and use it. -
Page 27: Hard Drive Array
HARD DRIVE ARRAY Handle Release Button Lock Release Handle Reset Button LOCK OPEN LOCK OPEN Hard Drive Power Buttons LOCK OPEN LOCK Alarm Light OPEN NOTE: The Alarm Light will turn on if the Hard Drives reach a temperature above safe operating conditions Swapping a Hard Drive Press the hard drive power button to turn off power to the hard drive you wish to remove. -
Page 28: Optional Components
OPTIONAL COMPONENTS To fully utilize the NVR’s potential; several optional Surveillix components are listed below. Contact the dealer for more information. Extra Video Storage Hard Drive Each DVR has a virtually unlimited storage potential. Add additional Video Data Hard Drives to extend the amount of Video Data the DVR system can store before overwriting older data. -
Page 29: Nvs Basics
NVS BASICS This chapter includes the following information: • Registration and Upgrade • Turning the DVR on and off • Becoming familiar with the Display screen • Defining Screen Divisions... -
Page 30: Setting The Time And Date
Exit to Windows by clicking the Exit button on the Display screen then and select Restart in Windows Mode. (See the Display screen section later in this chapter) Click Start > Programs > Surveillix > VFormat. Click the Export button in the System Settings tool section. -
Page 31: Importing Dvr Settings
Exit to Windows by clicking the Exit button on the Display screen and selecting Restart in Windows Mode. (See the Display screen section later in this chapter) Click Start > Programs > Surveillix > VFormat. Click the Import button in the System Settings Tool section. -
Page 32: Display Screen
DISPLAY SCREEN Each time the DVR starts, the program defaults to the Display screen. The following diagram outlines the buttons and features used on the Display screen. You should become familiar with these options as this is the screen that will be displayed the majority of the time. -
Page 33: Camera View
CAMERA VIEW Recording Status Special Recording Type INSTANT Camera No. and Name Recording Status Indicator The camera status for each camera is displayed in the upper right corner on the Video Display Area. The following are the different states for each camera: Recording Displayed when the camera is currently being recorded to the DVR. -
Page 34: Screen Division Buttons
SCREEN DIVISION BUTTONS The Screen Division menu allows you to view cameras in groups such as two by two, three by three and four by four. The button options are shown below. 1st Four Cameras View – Displays cameras 1-4 in the Video Display Area. To return to a different Multi-Camera View, select a different Screen Division option from the Screen Division menu. -
Page 35: Setup Options
SETUP OPTIONS This chapter includes the following information: • Setup Overview • Camera Setup • Motion • Frame Setup • Schedule • Sensor • Network • Information • Administrative... -
Page 36: Setup Overview
SETUP OVERVIEW The Setup options allow you to optimize your DVR by adjusting things like camera names, reboot schedules, recording schedules and more. It is extremely important that you setup your DVR correctly for several reasons. • Recording Schedules – By optimizing the recording schedule you can increase the amount of pertinent recorded video that is saved on the DVR and keep it longer. -
Page 37: Camera Setup
CAMERA SETUP Define Camera Name Selected Camera Display Select Camera Selects the camera to be edited. Selected Camera Display Displays the live camera feed from the camera selected. Sensor Connection Specify which sensors are currently in use. Enable Network Device PTZ Enables setup and use of Network Camera and PTZ Functionality. -
Page 38: Network Video
NETWORK VIDEO Connected Devices Automatic Camera Finder Supported IP Camera Manufacturers ACTi Panasonic Arecont Vision Pixord Axis Samsung Brans Securgen D-Link Sony IQeye Stardot Lumenera Toshiba Mobotix VivoTek Connecting a Network Device Connecting Manually From the Display screen, click Setup. Click Network Video. -
Page 39: Connecting With Camera Finder
Connecting with Camera Finder From the Display screen, click Setup. Click the Network Video tab. Click the Add/Remove Device tab. Click Find Cameras to automatically find all connected Network cameras. Select the check box next to the desired camera. Click Get Device. Type the User ID and Password of the device. -
Page 40: Camera Configuration
Camera Configuration The Camera Configuration tab displays information on all cameras (analog and network) connected to the Surveillix DVR Displaying More Columns The Camera Configuration tab can be customized to display the information you use most. Click Select Column to add or remove specific columns. -
Page 41: Upgrade And Registration
Software Serial Number: That product Serial Number is the unique number that Toshiba provided with the purchase software. System ID: The System ID is a number that is generated by the Surveillix unit. This is a unique code generated using the MAC address of the computer running the software. -
Page 42: Unlocking The Upgrade
Return to Setup > Network Cameras > License. Enter the Unlock Code generated by the Surveillix Registration Site into the License Key box. Click Register and confirm that the new License Key is listed in the Channel Connection License box. -
Page 43: Motion Setup
MOTION SETUP The DVR allows the user to adjust several different Motion Settings and create motion detection areas. Display full screen video pop up on motion event Beep on motion event Display full screen video pop up on sensor event Schedule recording at a regular specified interval Reduces Analog Signal Noise from Motion Detection Create a Motion Area... -
Page 44: Activating An Alarm On A Motion Event
Activating an Alarm on a Motion Event In the Motion Setup window, select a camera to edit from the Camera list. Create a motion area. Select the Alarm Output check box. Select a Control Output to activate for the selected camera. Select an Alarm Duration time when a motion event occurs. -
Page 45: Schedule Setup
SCHEDULE SETUP Recording Schedule The Recording Schedule window allows the user to create different recording schedules based on the day, time, and type of recording desired. In addition, this window contains the System Restart options that allow the user to perform basic system maintenance by automatically scheduling the DVR to restart periodically. -
Page 46: Sensor Schedule
Sensor Schedule The Sensors will supersede all other types of recording modes (Motion and Continuous). Regardless of the recording schedule of a particular camera, if a sensor event occurs the associated cameras will begin recording as a Sensor Event. Sensor Recordings will be flagged and searchable using the Index Search Mode. -
Page 47: Create A Recording Schedule
Create a Recording Schedule Select a day to begin creating the schedule for -or- click Single Day Selection, enabling Multi Day Selection, to create the same schedule for multiple days. Highlight the Time-Blocks within the Recording Schedule window for the camera(s) selected to schedule. Once the desired Time-Blocks are highlighted, click a Recording Mode button. -
Page 48: Special Day Schedule
Special Day Schedule The user can create days that have a unique recording schedule. If necessary create these on days that are ‘not typical’ such as Holidays, Special Events, etc. Special Day Mode / Normal Day Mode Date Bar Configured Special Days List Creating/Editing a ‘Special Day’... -
Page 49: System Restart Setup
System Restart Setup System Restart Setup allows the user to define a schedule wherein the DVR automatically restarts according to specified parameters. Create System Restart Schedule Click Schedule on the Setup screen. Click Restart Setup. Select the day(s) of the week to schedule an automatic system restart and select the check box to enable shut down. Note This step alone does not trigger the DVR to restart, only to shut down. -
Page 50: General Setup
1-6 at four-second intervals. Display Options Use Full Screen Stretch the Surveillix interface to use the full monitor screen. Display Size Select from available monitor display sizes. Use to correctly display video on wide screen monitors. Voice Warning The DVR allows users to play a sound file when either a Motion event or Sensor event occurs. -
Page 51: Connecting To A Wide Screen Display
Refer to the display documentation for the proper resolution settings. Click OK and confirm the change. Double-click the Surveillix Server icon on the Desktop. Click Setup on the Display screen and then click General. Under Display Settings, select the Use Full Screen check box and then select the correct resolution from the Display Size list. -
Page 52: Auto Sequence Setting
Auto Sequence Setting Auto Sequencing is available either in the Display screen when Auto Sequencing has been enabled or when a Spot-Monitor out signal is used to display on a spot monitor. Auto Sequencing conveniently displays video channels at specified intervals and sequences through each selected channel. -
Page 53: Network Setup
NETWORK SETUP Network Setup allows the user to adjust settings such as Ports, setup emergency PPP information for use with the Emergency Agent and enable Remote Access. Settings for Video Sent to Remote Client with Emergency Agent Use with Remote Connections Enable RS-232 Between DVR and Remote Client... -
Page 54: Information
INFORMATION The Information display allows users to define the site code necessary for connecting to remote software, save comments relative to the DVR and store tech support and contact number information. Current Server Total HDD /Available HDD Space Software Version User-Defined Contact Numbers Enter comments... -
Page 55: Administrative Setup
ADMINISTRATIVE SETUP Select Date Log Data Display Export Log Data (1 to 7 days) Disk Management The Disk Management window is a native Windows function. This window displays the partition scheme and health status of the Hard Disk Drives in the DVR. This window is often used to troubleshoot a DVR, or verify the amount of Hard Drive storage installed. For more information about Disk Management, consult a Windows XP manual. -
Page 56: Setting Up Ddns
Setting Up DDNS Dynamic Domain Name System (DDNS) is a service that provides a static address to simplify remote connection to the DVR. This service is most useful for installations where the WAN (public) IP address is dynamic (changes from time to time). Most public IP addresses are dynamic unless a static address has been specifically ordered from the internet service provider. -
Page 57: User Management
User Management The User Management Console allows the administrator to create, edit, and delete user accounts. Each user account can be assigned different privileges to limit the usage of the DVR system. Users can be given administrator privileges by enabling all rights, however only the true administrator account can log into the User Management Console. -
Page 58: User Rank
User Rank The User Ranking structure allows the option to assign a privilege system (1-10 where one has the most rights) to users of the DVR Software. For example. Since only one user is allowed to use the PTZ controls at any one time, an administrator with a higher rank can kick another user out and take control of the PTZ. -
Page 59: Status Check / Email
Status Check / Email General Click Setup on the Display screen. Click Administrative. Click Status Check/Email. Select the Enable Email Alarm check box. Enter a From Name and e-mail Address. Note This name and address will appear in the From line of the email alert message. -
Page 60: Storage Check
Storage Check Set up the General and Users tabs first. (see above) Select the Use Storage Check check box. Define the number of minutes. Select an Alert Option, Beep or Popup Message, if desired. Click Apply. Recording Data Check Setup the General and Users tabs first. (see above) Select the Recording Data Check check box. -
Page 61: Smart Information
SMART Information The SMART Information tab displays Hard Drive information. SMART Alert Setup the General and Users tabs first. (see above) Select the Enable SMART Alarm. Define the number hours between SMART checks. Select the type of SMART event to trigger an action. Define the maximum HDD temperature. -
Page 62: Instant Recording
INSTANT RECORDING The Instant Recording feature allows users to manually initiate recording on a specific camera, overriding the current schedule. When Instant Recording is activated the DVR flags the clip as an event so Instant Recording instances can be found using the Index Search Instant Recording can be used, for example, when a suspicious object or person is detected and the user wants to flag that section of video for easy retrieval at a later date. -
Page 63: Search
SEARCH This chapter includes the following information: • Search Overview • Daylight Saving Time • Index Search • Preview Search • Graphic Search • Motion Search... -
Page 64: Search Overview
SEARCH OVERVIEW The DVR has several options that allow the user to easily search through, and find, a particular section of video. From Motion/Sensor indexing to calendar views highlighting days with recorded video; the DVR is equipped to help the user quickly find a specific video or event. -
Page 65: Adjust The Brightness Of An Image
Because of the timing gap between the two fields, according to the standardized image rules, after image might occur to high speed moving images. The Surveillix DVR allows the user to remove this by clicking the Clean Image button. -
Page 66: Performing A Basic Search
However when the hour “falls back” there is a duplicated hour that under normal circumstances would be recorded over. The Surveillix DVR actually records both hours and allows the user to select which hour to play if the need arises. -
Page 67: Save To Jpg Or Avi
SAVE TO JPG OR AVI The DVR can export single images in a JPG Image file format and save video clips in an AVI format. Both JPG and AVI file formats are the most commonly used graphical formats today. Virtually every computer offers some type of support for these file formats which make them the most ideal formats to use. -
Page 68: Bookmarks
Bookmarks Use bookmarks to mark a video clip during a search. Export bookmarked data using the Clip Backup feature. Perform a search for the desired video. Stop playback at the beginning of the desired clip. Right-click the video and select Start Bookmark. Click the play button to continue playback. -
Page 69: Single Clip Backup
Single Clip Backup Along with the Save option, a single camera backup option is also included with the Surveillix software. The single Camera or Clip Backup allows the user to backup a single camera without hAVIng to backup multiple cameras at a given time. The Clip Backup option gives the users the ability to choose a backup time frame, choose a specific camera, add memos, and even make a copy for the Backup Viewer if needed. -
Page 70: Index Search
INDEX SEARCH Using the Index Search can greatly decrease the amount of time spent searching through saved video. The Index Search allows a user to perform a search based on criteria such as Sensor, Motion and Instant Record events Performing an Index Search Click the Calendar button on the Search screen to select the date to search. -
Page 71: Preview Search
PREVIEW SEARCH Preview Search can be used in a number of circumstances to quickly find an exact moment where an event, such as a theft, occurred. The Preview Search gives a 24 Hour visual overview of a single camera by separating a 24 hour period (1 day) into 24 images, one image for each hour of the day. -
Page 72: Performing A Preview Search
Performing a Preview Search Select a single camera by either turning off all cameras but one or double-clicking a displayed image. Click Preview Search. 24 images display. If there is no recorded video during a portion of the day, “No Image” will be displayed where the image should be. -
Page 73: Object Search
OBJECT SEARCH Object Search is a powerful search utility that is used to search a region on the video for any motion changes. Results are neatly displayed and can be viewed quickly. Performing an Object Search Perform a Basic Search. See the instructions on Performing a Basic Search. Select a single camera, either by turning off all cameras but one or by double-clicking a displayed image. -
Page 74: Motion Search
MOTION SEARCH The Motion Search provides a dynamic display of the levels of motion in recorded video. Adjust the level of motion to only play clips of video at or above that level. To enable motion data to be saved for Motion search, ensure that you select the following settings: On the Motion setup page under Motion Regions, select the Detect Detail Motion Area check box. -
Page 75: Search In Live
SEARCH IN LIVE The Search in Live feature allows users to review events immediately while monitoring live video. Pause, rewind, and resume live video within seconds of an alarm event or suspicious activity. Move the mouse cursor over the desired live video display on the Live Display screen. Press the scroll button on the mouse. - Page 76 NOTES:...
-
Page 77: Backing Up Video Data
BACKING UP VIDEO DATA This chapter includes the following information: • Overview • Saving Video to a DVD • Saving Video from a Single Camera • Scheduling Regular Video Backup... -
Page 78: Backup Overview
BACKUP OVERVIEW The Backup Center allows you to back up recorded video data from multiple dates and times to one or more locations including the DVD-RW drive, Network Storage Locations, and External Hard Drives. The DVR can easily backup important video data to an internal or external media location. The most commonly used forms of this are CD-R/RWs, External USB or FireWire Hard Drives, and Network Drives. -
Page 79: General Screen Overview
General Screen Overview The General Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, or periods, to a specified storage location. Calendar Select Additional Drive/Folder Define Drive Priority Select Remote Network Location Hour / Minutes Recording data displays in hourly (24 horizontal columns) and 10-minute (6 vertical cells) segments. -
Page 80: Clip Screen Overview
Clip Screen Overview The Clip Screen is used for backing up video recorded by individual cameras for a selected period of time to a specified storage location Performing a Clip Backup Click Backup on the Display screen. Click the Clip tab at the top of the Backup Center window. Set the Start Time and End Time under Time Setup. -
Page 81: Scheduled Screen Overview
Scheduled Screen Overview The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras for a selected period, on a regular scheduled basis (1-24 hours). The Scheduled Backup Screen is similar to the General Backup Screen. Performing a Scheduled Backup Click Backup on the Display screen. - Page 82 NOTES:...
-
Page 83: Lan / Isdn / Pstn Connections
LAN / ISDN / PSTN CONNECTIONS This chapter includes the following information: • Overview • Configuring TCP/IP Settings • Connecting to a LAN • LAN / ISDN / PSTN Connections... -
Page 84: Lan Overview
Since connecting the DVR to a network can be extremely complex (depending on the network), this Surveillix DVR manual will cover only the basics. It is suggested that the DVR administrator consult the Vendor or IT Administrator before attempting to create or connect to a LAN. -
Page 85: Web Viewer
WEB VIEWER This chapter includes the following information: • Overview • Configuring the Web Viewer... -
Page 86: Web Viewer Overview
WEB VIEWER OVERVIEW The DVR allows you to access video using Microsoft® Internet Explorer® 7. Highlights: View Live Video from most computers Username and Password protected Easy to use graphical interface Basics: 75 users can access the Web DVR simultaneously. The Web Viewer is an easy, secure way to view live video from virtually any computer with an internet connection using Microsoft Internet Explorer. -
Page 87: Configuring The Server For Remote Connection
Configuring the Server for Remote Connection Click Setup on the main display screen. Click Network. Clear the Disable Remote Control check box. You should now be allowed to adjust port settings if necessary. NOTE: If you are using a Firewall, it may be necessary to adjust the port settings on both the DVR and the Firewall. Contact the Network Administrator for more information. -
Page 89: Included Software Setup
INCLUDED SOFTWARE SETUP This chapter includes the following information: • Emergency Agent Overview • Remote Software Overview • Digital Verifier • Backup Viewer... -
Page 90: Emergency Agent Overview
Emergency Agent window refer to the Emergency Agent window section later in this chapter. Open the Emergency Agent window on the Client PC - Start >All Programs > Surveillix > Emergency Agent > Emergency Agent Right Click in the DVR list and select New. Enter the DVR Code, DVR Name, and IP Address of the DVR to connect to in the Site Edit window that opens. -
Page 91: Setup Window
Setup Window Network Port Indicates the port which the Emergency Agent uses to listen for incoming events. This number should be changed to the same number as is set in the Emergency Port in Network Settings on the DVR. Save Directory Sets the location that recorded video footage is saved to. -
Page 92: Add Items To Alarm Confirm List
Add Items to Alarm Confirm List From the Option menu, click Setup. Type the desired text in the box below the Alarm Confirmation List. NOTE: The items in the Alarm Confirmation List will be available on a list under Status Setting in main Emergency Agent screen. Click Add. -
Page 93: Search Alarm Window
SEARCH ALARM WINDOW Video Display Play Controls Go to Next Event Go to Previous Event Alarm Event Information Export Quality It may be necessary to reduce the overall size of an AVI file; for example, to email to someone. AVI file sizes can be reduced by reducing the image quality. However, reducing the image quality causes the AVI video to appear more pixilated. -
Page 94: Remote Software Overview
DSL, Cable Mode, T1, ISDN, 56K Modem, LAN, and more. The Surveillix Remote software allows you to view live video, search through archived video, export images and video clips and have virtually full Setup control. Surveillix Remote Software is Microsoft Vista ®... -
Page 95: Remote Software Setup
DVR Site List Import/Export saved configurations Selected Site Information Select Start > Programs > Surveillix > Remote > Surveillix Remote Center. The Surveillix Remote Software opens and the Local Connection window opens. Click New to open the Site Info window. -
Page 96: Configuring The Dvr
In order to access the DVR remotely, the DVR Server must be setup to allow remote connections. Time Out Value Specifies a value (in seconds) to wait for a signal from the Surveillix Remote Client. If a signal is not received by that time, the connection is dropped. Center Port Used to transfer the connection data. -
Page 97: Digital Verifier Overview
When the Setup Complete window appears click Finish. Installation is complete. Using the Digital Verifier Open the Digital Verification program by selecting Start > Programs > Surveillix > Digital Verifier > Digital Signature Verifier. Click the Browse button to load the JPG image. -
Page 98: Backup Viewer Overview
Loading Video from DVD or Hard Drive Open the Backup Viewer program: Start > Programs > Surveillix > Backup Viewer > Backup Viewer. Click Open. The Total Backup Search window will open. For DVD-ROM data, select the appropriate DVD-ROM drive letter from the Backup Media box. -
Page 99: Scs Overview
SCS OVERVIEW SCS software is Network DVR Management Software; a powerful utility that allows 100 or more DVRs to be controlled using one computer. This software allows you to view live video, search saved video, edit and configure setup on each DVR, and import maps of buildings and other locations. -
Page 101: Appendix
APPENDIX The Appendix contains technical specifications for many of the NVS internal components... -
Page 102: Nvs Specifications
NVS SPECIFICATIONS Intel® CPU Storage (Hard Drive) 500 GB Standard / 4TB Max Storage MAX Up to 4 HDD with DVD±RW Operating System Microsoft® Windows® XP Embedded 3 GB Viewing Rate Max 480 PPS Recording Rate Dependant on Network Video Device Encoding Rate Resolution Recording resolutions dependent upon the resolutions the Network Camera supports Image Compression...