Panasonic EvalBoard PAN4555 Manual

Ism rf transceiver testboard with pan4555 and antenna

Quick Links

CLASSIFICATION
Einstufung
SUBJECT
Thema
CUSTOMER'S CODE
EvalPAN4555
FIGURE 1 ISM RF TRANSCEIVER TESTBOARD WITH PAN4555 AND ANTENNA
European Technology Center
Panasonic Electronic Devices (EUROPE) GmbH
PRELIMINARY
EvalBoard PAN4555
PANASONIC'S CODE
Manual
Evaluation-Board for
PAN4555 Wireless Module
No.
DS-Eval4555-2400
PAGE
Seite
DATE
Datum
APPROVED
CHECKED
genehmigt
geprüft
REV.
01
1 of 16
30.03.2007
DESIGNED
Erstellt
Table of Contents
loading

Summary of Contents for Panasonic EvalBoard PAN4555

  • Page 1 1 of 16 CUSTOMER’S CODE PANASONIC’S CODE DATE EvalPAN4555 30.03.2007 Datum Manual Evaluation-Board for PAN4555 Wireless Module FIGURE 1 ISM RF TRANSCEIVER TESTBOARD WITH PAN4555 AND ANTENNA APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 2: Table Of Contents

    10.2. Sheet 2 ........................ 13 10.3. PAN4555 pinlist ....................14 Related Documents....................... 15 Document STATUS....................... 15 History for this Document....................15 General Information ...................... 16 Life Support Policy ......................16 APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 3: Overview

    Integrated Development Environment (IDE) Metrowerks CodeWarrior IDE from www.metrowerks.com is required. Important: To install and run the programs you need Administrator rights on the test PC APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 4: Setting Up The Evalboard

    P1-P2-P3 does not drop below approximately 6,6Vdc. For the location of switches and jumpers on the Evaluation board see chapter APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 5: Testboard Layout

    S1-3 on, all others off (no HW handshake) UART2: S1-2 and S1-4 on, all others off (no HW handshake) Figure 2 ISM RF Transceiver testboard with PAN4555 and antenna APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 6: Operation Of The Testboard

    A linear regulator on the testboard regulates the input voltage down to the +5V DC board supply. A second linear regulator regulates the +5V DC down to the module VCC supply of 2,1/2,7/3,4Vdc APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 7: Power From A Usb Device

    VCC remarks JP4 only 2,7 Vdc typical for PAN4555 JP3 only 3,4 Vdc maximum for PAN4555 no jumpers 2,1 Vdc minimum for PAN4555 (Table 2) APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 8: Serial Ports

    COM2 Connector. Please make sure that pin1 of the plug connects to pin1 of the header. The correct device selection for PAN4555 is a Motorola MC9S08GT60. APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 9: Flashing And Serial Upload Instructions

    Close the Embedded Bootloader and open VIEW\ZigBee Radio Test Check a “Device Ready”, a “Ping” has to result in “Hello” Now the devices are ready for a test as in part 9.2 APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 10: Freescale Zigbee Implementation

    6. The cost of a ZigBee product certification at a testhouse (TÜV Rheinland) ranges from approximately US$ 4000,- to US$ 8000,-, depending on the implemented software. APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 11: Rf Testing Of Pan4555

    For detailed information on how to run PER measurements refer to the freescale documentation. Remark: Make shure that both Transmitter and Receiver are set to single port mode as described under point 7. APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 12: Schematic Of The Testboard And Pan4555 Pinlist

    EvalBoard PAN4555 PAGE Thema Seite 12 of 16 CUSTOMER’S CODE PANASONIC’S CODE DATE EvalPAN4555 30.03.2007 Datum 10. SCHEMATIC OF THE TESTBOARD AND PAN4555 PINLIST 10.1. SHEET 1 APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 13: Sheet 2

    CLASSIFICATION REV. PRELIMINARY Einstufung DS-Eval4555-2400 SUBJECT EvalBoard PAN4555 PAGE Thema Seite 13 of 16 CUSTOMER’S CODE PANASONIC’S CODE DATE EvalPAN4555 30.03.2007 Datum 10.2. SHEET 2 APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 14: Pan4555 Pinlist

    PTD6 PTD6 PTD4 PTD4 not connected not connected not connected not connected PTC3 PTC3 RESET RESET RESET BKGD BKGD BKGD not connected not connected VREFH VREFH APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 15: Related Documents

    Data Sheet Freescale MC9S08GT60 Microcontroller 12. DOCUMENT STATUS This information is preliminary. 13. HISTORY FOR THIS DOCUMENT Revision Date Modification / Remarks Version Datum Änderungen / Bemerkungen 30.03.2005 preliminary version APPROVED CHECKED DESIGNED genehmigt geprüft Erstellt European Technology Center Panasonic Electronic Devices (EUROPE) GmbH...
  • Page 16: General Information

    15. LIFE SUPPORT POLICY This Panasonic Electronic Devices (Europe) GmbH product is not designed for use in life support appliances, devices, or systems where malfunction can reasonably be expected to result in a significant personal injury to the user, or as a critical component in any life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.

Table of Contents