Page 1: Declaration Of Conformity
Declaration of Conformity Hereby, Sharp Telecommunications of Europe Ltd, declares that this 902SH is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the original declaration of conformity can be found at the following Internet address: http://www.sharp-mobile.com...
Page 2: Introduction
Introduction Congratulations on your new 3G/UMTS 902SH phone. Useful Functions and Services Your phone offers you the following features: • Video calls. You can talk while viewing each other on respective screens. • A built-in digital camera for taking pictures and video clips.
Page 3 Introduction • A schedule alarm for creating and sending schedule entries with alarm settings. • Video output. You can connect your phone to other devices, such as TVs or videos set to output, and display Java™ data, images, or video clips. •...
Page 4 Introduction About This User Guide This user guide is carefully designed to help you learn about your phone’s features and operations quickly and effectively. NOTICE • We strongly recommend that you keep separate permanent written records of all important data. Data may be lost or altered in virtually any electronic memory product under certain circumstances.
Page 5 Introduction • All the functions described in this user guide may not be supported by all networks. • We assume no responsibility for downloaded contents, information, etc. from the network. • Occasionally, a few black or bright pixels may appear on the screen. Please note that this will not have any impact on any of the features or on performance.
Page 6 Introduction Powered by JBlend™ Copyright 1997-2004 Aplix Corporation. All rights reserved. JBlend and all JBlend-based trademarks and logos are trademarks or registered trademarks of Aplix Corporation in Japan and other countries. ® Powered by Mascot Capsule /Micro3D Edition™ ® Mascot Capsule is a registered trademark of HI Corporation ©2002-2004 HI Corporation.
Page 7 Bluetooth is a trademark of the Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sharp is under license. Other trademarks and trade names are those of their respective owners.
Page 8 Introduction ® Contains Macromedia Flash™ technology by Macromedia, Inc. Copyright © 1995-2004 Macromedia, Inc. All rights reserved. Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks or registered trademarks of Macromedia, Inc. in the United States and other countries. Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations ;...
Page 9 Introduction CP8 PATENT...
Page 10 Introduction This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a licensed video provider.
Page 11: Table Of Contents
Contents Introduction .............. 1 Using the Menu ............51 Your Phone ............. 13 Top Menu ............51 Getting Started ............14 Entering Characters ..........53 Inserting the SIM Card and the Battery ....20 Changing the Input Languages ......55 Removing the SIM Card and the Battery ....
Page 12 Contents Receiving a Contacts List Entry ......69 My Saved Page ..........138 Camera ..............70 Text Templates ..........139 Taking Pictures ..........70 Other Documents .......... 140 Games & More ............143 Recording Video Clips ........80 Messages ..............87 Games ............143 MMS ...............87 Screensavers ..........
Page 13 Bluetooth ............206 Infrared ............212 Network Settings ........... 213 Internet Settings ..........216 Backup/Restore ..........220 Connecting 902SH to Your PC ......223 System Requirements ........223 3G/GSM GPRS Modem ........224 Handset Manager .......... 225 Software Installation ........225 Troubleshooting ...........
Page 14: Your Phone
Your Phone Please check the following carefully. Your phone should come complete with: • 3G (UMTS)/GSM 900/1800/1900/GPRS phone • Lithium Ion Battery • Battery Cover • AC Charger • Stereo Headset • Handsfree Microphone Unit • CD-ROM • SD Memory Card •...
Page 15: Getting Started
Getting Started 1. Earpiece 2. Navigation Keys (Arrow Keys): a b c d Moves cursor to highlight a menu item, etc. Up/Down arrow keys: Displays the Contacts List when pressed during stand-by. Left arrow key: Displays the message inbox when pressed during stand-by.
Page 16 Getting Started 9. Microphone 10. Sub Camera (Internal Camera) 11. Main Display 12. Microphone (for the viewer style of the display) 13. Right Soft Key: Executes the function at the bottom right of the screen. Shortcut to “Vodafone live!” by opening the browser. Press during stand-by.
Page 17 Getting Started 17. Keypad: 1 key: Shortcut to the Voice mail centre. (Depending on the SIM card.) Press and hold during stand-by. 2-9 keys: Press and hold during stand-by to display each speed dial phone number. 0 key: Press and hold to enter +. 18.
Page 18 Getting Started 19. Camera (External Camera) 20. Sub Display 21. Built-in Aerial: Warning: Do not cover the top of the phone with your hand when in use as this may interfere with the performance of the built-in aerial. 22. Mobile Light: Used as a flash or an auxiliary light in camera mode.
Page 19 Getting Started 27. Infrared Port: Sends and receives data via infrared. 28. Memory Card Slot Cover 29. Small Light: Used as a battery charge indicator. 30. Side Keys (Side-Up/Side-Down/Camera/Cancel): Side-Up/Side-Down: (These two keys work in reverse with the viewer position of the display.) Moves the highlight up or down.
Page 20 Getting Started Cancel Key: Press to return to the previous screen. Press and hold to reject an incoming call. Press during an incoming call to send a busy tone to the caller. Press to end the call.
Page 21: Inserting The Sim Card And The Battery
Getting Started Inserting the SIM Card and the Battery Slide off the battery cover ( Slide the SIM card into the SIM holder. Hold the battery so that the metal contacts of the battery are facing down, slide the guides on the top of the battery into the battery slots , and then insert it Replace the battery cover.
Page 22: Removing The Sim Card And The Battery
Getting Started Removing the SIM Card and the Battery Ensure that the phone is turned off and that the charger and other accessories are disconnected. Slide off the battery cover ( Lift the battery using the protruding edge and remove the battery from the phone. Hold down gently while sliding the SIM card out of the SIM holder ( Battery Disposal...
Page 23: Charging The Battery
Getting Started Charging the Battery You must charge the battery for at least 135 minutes before using your phone for the first time. Using the Charger Open the cover of the external connector, connect the charger to the external socket located at the bottom of the phone by pressing both sides indicated with arrows, and Small light connect to an AC outlet.
Page 24 Getting Started To Disconnect the Charger When charging is complete, the small light turns off. Unplug the charger from the AC outlet, then unplug the charger connector from the phone. Close the cover. Note • Do not use any non-approved chargers as they may damage your phone and invalidate any warranties, see “Battery”...
Page 25 Getting Started Low Battery during Use When the battery is running low, an alarm will sound and “ ” is displayed on the main and external displays. If you are using your phone and you hear the low battery alarm, attach your charger as soon as possible.
Page 26: Inserting The Memory Card
Getting Started Inserting the Memory Card Turn off the phone. Open the memory card slot cover. Insert the memory card all the way in. Close the cover. Note • The miniSD memory card cannot be used with your phone. • Make sure that the phone is turned off before inserting the memory card. •...
Page 27: Removing The Memory Card
Getting Started • You see the following indicators when the memory card is in use: : Appears when the card is inserted. : Appears when the card is inserted and locked. : Appears when the card is damaged or unusable. : Appears when the card is locked and damaged or unusable.
Page 28 Getting Started To Enter the PIN Code If activated you are asked to enter a PIN (Personal Identification Number) code and handset lock code after turning on your phone. Enter your PIN code. The PIN code is 4 to 8 digits. Press To turn the power off, press and hold F for approximately 2 seconds.
Page 29: Keypad Lock
Getting Started Keypad Lock You can lock the keypad to prevent it from being pressed accidentally. Locking the Keypad Press and hold P during stand-by. To unlock, press and hold P. • Emergency numbers (112, etc.) can be entered and dialled regardless of the keypad lock.
Page 30: Display Indicators (Main Display)
Getting Started Display Indicators (Main Display) Indicator area : Strength of received signal/Service out of range : 3G (UMTS)/GPRS : GSM/GPRS : Roaming outside network Offline mode [enabled] Data exchange with external device Connection to the server [established/communicating] Indicator area Memory card inserted Voice call [incoming/in progress] : Video call communication mode enabled...
Page 31 Getting Started Connection status Bluetooth [USB cable/IrDA ON/IrDA exchanging information/ wireless setting [enabled (during stand-by or except during stand-by)/exchanging information/talking with the Bluetooth headset]] Java™ application [executed (colour)/suspended (grey)] 13. (No display)/ Current profile [Normal/Meeting/Activity/Car/Headset/Silent] Silent/vibration setting [silent/increasing volume/vibration enabled/silent and vibration enabled/increasing volume and vibration enabled] : Speaker mode [speaker phone/speaker activated/microphone muted] Battery level [sufficiently charged/charging recommended/charging...
Page 32 Getting Started : WAP/OTA provisioning alerts [WAP alert/OTA provisioning alert/WAP and OTA provisioning alerts] Voicemail message alert Connection status [1st IrDA communication [enabled/exchanging information]] Phone Lock enabled Keypad Lock enabled /(blank): IrDA setting [enabled/disabled] 27. 12:00: Clock 28. 01.01.05: Date 29.
Page 33: Display Indicators (External Display)
Getting Started Display Indicators (External Display) Message area Status Indicators 12:00 Battery level [sufficiently charged/charging recommended/charging required/empty] : Clock : Strength of received signal/Service out of range Indicator area Missed events Voice call incoming Video call incoming Call in progress Alerts [messages/Delivery Report] WAP Push service Daily alarm enabled...
Page 34: Opening Your Phone
Getting Started Opening Your Phone Your phone can be opened in the following three positions: normal, self-portrait and viewer positions. Normal Position Open the phone until the display stops as illustrated. Self-portrait Position Turn the display 180° clockwise. Use this position to take a self-portrait position with the external camera. Do not turn the display anticlockwise as this may damage it.
Page 35: Navigating Functions
Navigating Functions Using in the Normal Position of the Display All applications are accessed from the Main menu. To open the Main menu, press the centre key ( ) during stand-by. To launch applications, you will need to highlight menu items, and make selections. To select a menu item (indicated in quotation marks), move the cursor using a, b, c and d, and press to select.
Page 36 Navigating Functions Using in the Viewer Position of the Display Available keys in viewer position of the display are the side-up and side-down keys, camera key and cancel key. To open the Main menu, press the camera key during stand-by. To select a menu item (indicated in quotation marks), press the side-up and side-down keys and press the camera key to select.
Page 37: Voice Call/Video Call Functions
Voice Call/Video Call Functions • You can make and answer a call in the viewer position of the display using the side keys. Making a Voice Call Enter the area code and the phone number you wish to dial and press D to dial. Enter Number If you enter the wrong number, press U to delete the number to the left of the cursor.
Page 38: Speed Dialling
Voice Call/Video Call Functions International Calls Press and hold Q until a + (international dialling prefix) sign is displayed. Enter the country code, followed by the area code (without the leading zero) and the phone number, and press D to dial. Adding an Entered Phone Number to the Contacts List After entering a phone number, press [Options] and select “Save Number”.
Page 39: Redialling
Voice Call/Video Call Functions Redialling You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific categories contain up to 10 numbers and the “All Calls” list contains up to 30. Press D during stand-by. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls”...
Page 40 Voice Call/Video Call Functions • If you have subscribed to the Calling Line Identification (CLI) service and the caller’s network sends the number, the caller’s number is displayed on the screen. If the caller’s name and number are saved in the Contacts List, the caller’s name and phone number are displayed on the screen.
Page 41: Incall Menu (Voice Call)
Voice Call/Video Call Functions Incall Menu (Voice Call) Your phone has additional functions available while a call is in progress. Adjusting the Earpiece Volume During a call, you can adjust the earpiece volume (and handsfree volume, if connected). During a call, press the side-up or side-down key to display the Earpiece Volume screen.
Page 42 Voice Call/Video Call Functions Putting a Call on Hold This function allows you to manage two calls at the same time. If you wish to make another call while you are talking to someone, you can put the current call on hold to call someone else.
Page 43 Voice Call/Video Call Functions Call Waiting This service notifies you of another incoming call while you have a call in progress. During a call, press [Options] and select “Hold & Answer” to answer the second call. The first call is put on hold and you can now talk to the second caller. Press [Options] and select “Release &...
Page 44 Voice Call/Video Call Functions Note • The conference call service may not be available on all networks. Contact your network operator for more information. • You have more options for the Conference call in step 2: • To put all participants on hold, select “Hold All”. •...
Page 45 Voice Call/Video Call Functions To Have a Private Conversation with One of the Participants If you wish to have a private conversation with one of the participants, you may select the participant from the conference list and put the other participants on hold. During a conference call, select the person that you wish to talk to.
Page 46: Making A Video Call
Voice Call/Video Call Functions Making a Video Call Video Call 0:00:02 Note • Use this function with only the video call enabled phones. • Make sure that the battery is fully charged and the signal length is greater before using this function.
Page 47: Answering A Video Call
Voice Call/Video Call Functions • If the called party’s phone is not video call enabled, you can press F and enter the phone number again to make a voice call. • When the call ends, the last call cost is displayed. Answering a Video Call When an incoming call is detected, the phone rings.
Page 48: Incall Menu (Video Call)
Voice Call/Video Call Functions Incall Menu (Video Call) Video Call Muting the Microphone Options During a video call, press [Mute] to mute a microphone. To unmute the microphone, press [Unmute]. Swap Images Camera Picture Swapping Images Enable Opt. Zoom You can swap images between the main and sub screens. Loud Speaker Off During a video call, press [Options] and select “Swap Images”.
Page 49 Voice Call/Video Call Functions Using the Optical Zoom Function The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom.
Page 50 Voice Call/Video Call Functions Video Call Settings To Change the Quality of the Incoming Image You can adjust the quality of the called party’s image. During a video call, press [Options] and select “Video Call Settings”. Select “Incoming Format”. Select “Normal”, “Quality Prio.” or “Frame Rate Prio.”. “Normal”: The standard quality is used.
Page 51 Voice Call/Video Call Functions To Adjust the Video Exposure During a video call, press [Options] and select “Video Call Settings”. Select “Exposure”. Press a (Light) or b (Dark).
Page 52: Using The Menu
Using the Menu Top Menu Press during stand-by. Camera The Main menu is displayed. Press a, b, c or d to highlight the desired menu, then press to access the function. The sub menu is displayed. For details on the menu options, see the table on pages 248 and 249. Using the Menu in the Viewer Position of the Display Set the phone in the viewer position of the display.
Page 53 Using the Menu Shortcuts Your phone has a shortcut key (assigned to the shortcut key: S) with which you can access the desired menu quickly. The default shortcuts are as follows, which you can later customise: • Dialled Numbers • Received Calls •...
Page 54: Entering Characters
Entering Characters When entering characters to create Contacts List entries, text messages or multimedia messages, etc., press the corresponding keys. In multi-tap input method, press each key until the desired character is displayed. For example, press H once for the letter A or twice for the letter B. Table of Characters Pressing each key scrolls characters in the following order.
Page 55 Entering Characters Upper Case Lower Case Numeric Characters Characters TUV8 tuv8 WXYZ9 wxyz9 (space) + = < > € £ $ ¥ % & 0 Switches character case between four modes: Abc, ABC, 123 and abc. ; - + # ∗ , ? ! @ ' "...
Page 56: Changing The Input Languages
Entering Characters Changing the Input Languages You can change the input language on the text entry screen. On the text entry screen, press [Options] and select “Input Language”. Select the desired language. Changing the Input Mode T9 Text Input T9 text input method is a shortcut to enter text easily and quickly. On the text entry screen, press and hold P to enter T9 mode.
Page 57 Entering Characters • If you press Q instead of step 6, a space is inserted next to the selected word. Symbols and Punctuation On the text entry screen, press [Options] and select “Add Symbol”. Select the desired symbol. My Dictionary You can create your own word list for T9 text input.
Page 58: Using Templates
Entering Characters Using Templates You can use the sentences registered in Text Templates when entering characters. For details on creating the text template, see “Adding Phrases to Text Templates” on page 139. On the text entry screen, move the cursor to the point you wish to insert the template.
Page 59 Entering Characters To Paste Text On the text entry screen, move the cursor to the point you wish to paste the letters. Press [Options] and select “Advanced”. Select “Paste”. The saved text is pasted.
Page 60: Contacts List
Contacts List (M 8-1) You can store the phone numbers and email addresses of your friends, family and colleagues in the Contacts List. Contacts Your phone can store up to 500 entries. In a Contacts List, you can save the following items: Contacts List Items Saved in the Handset Memory Manage Group...
Page 61: Changing The Name Order
Contacts List Birthday: Picture: Assign Tone/Video (For Voice Call, For Video Call, For New Message): Secret: Items Saved in the SIM Memory Name: up to 16 characters Tel 1: up to 32 digits Tel 2 (displayed if “Tel 1” is entered): up to 32 digits Email1: up to 80 characters...
Page 62: Selecting The Storage Memory
Contacts List Selecting the Storage Memory → → “Contacts” “Advanced” “Save New Contact to” Select the Contacts location from “Handset”, “SIM” or “Choice”. • “Choice” prompts you to choose the memory every time you save a new entry. Changing the Contact List Order You can change the listing order of the Contacts List entries between by alphabet order or by group.
Page 63: Viewing My Contact Details
Contacts List • To create an entry, at least one field must be filled (“First Name”, “Last Name”, “Tel 1 ” or “Email1” for the handset memory; “Name”, “Tel 1” or “Email1” for the SIM memory). Adding a Thumbnail to Entries →...
Page 64: Copying Contacts List Entries Between Sim Card And Handset
Contacts List Copying Contacts List Entries between SIM Card and Handset → → “Contacts” “Advanced” “Copy All Entries” Select “SIM to Handset” or “Handset to SIM”. Note • When you insert the SIM card into your phone for the first time and start the Contacts List application, the confirmation screen is displayed automatically, asking you if you wish to copy or not.
Page 65: Editing Contacts List Entries
Contacts List • If more than one phone number is registered for the entry, highlight the desired phone number after step 1 and press D. • You can also dial from the details screen of the Contacts List. On the details screen, select the desired phone number and press D.
Page 66: Manage Group
Contacts List Deleting a Contact Entry → “Contacts” “Contacts List” Highlight the desired entry. Press [Options] and select “Delete”. Manage Group (M 8-2) Different ringtones can be set for each group. If you do not change a group ringtone, the ringtone assigned in the Settings menu is used.
Page 67: Assigning A Ringtone Or A Ring Video Clip To Each Contacts List Entry
Contacts List Editing the Group Name You can edit group names to be assigned to the Contacts List entries. First, change the Contacts List displayed (p. 60). → “Contacts” “Manage Group” Highlight the desired group name. Press [Options] and select “Edit Name”. Modify the name.
Page 68: Memory Status
Contacts List Select the desired tone or video clip. For details on selecting a ringtone or a ring video clip in the Settings menu, see “Assigning a Ringtone” on page 173 or “Assigning a Ring Video Clip File” on page 174. Press [Save] when finished.
Page 69: Sending A Contacts List Entry
Contacts List To Edit the Speeddial List → “Contacts” “Speeddial List” Highlight the entry you wish to edit. Press [Options] and select the desired option. “Re-Assign” (displayed when a phone number is already assigned): Displays the Contacts List entries. Select (Reassign) other entries. “Assign”...
Page 70: Receiving A Contacts List Entry
Contacts List For “As Message” For details, see “MMS” on page 87. For “Via Bluetooth” For details, see “Bluetooth” on page 206. For “Via Infrared” For details, see “Infrared” on page 212. Receiving a Contacts List Entry When the phone receives a Contacts List entry, a confirmation message is displayed during stand-by.
Page 71: Camera
Camera (M 5) Your phone has an integrated digital camera. This allows you to shoot and send pictures and video clips wherever you are. Taking Pictures “Camera” Press to take the picture. The shutter sounds and the still image of the taken picture is displayed. Press [Save].
Page 72 Camera Note • Do not rotate the main display anti-clockwise. Otherwise, the phone may malfunction. Sending Taken Pictures You can send the taken picture via “With Message” or “live! Postcard”. (The Postcard service is not available with some service providers. Contact your service provider for more information.) “Camera”...
Page 73 Camera Selecting the Picture Size You can select the size of pictures. All taken pictures are saved in the JPEG format. → → → “Camera” [Options] “Picture Settings” “Picture Size” Select the desired size. Picture Sizes: 1224 × 1632 dots 960 ×...
Page 74 Camera To Enable or Disable the Optical Zoom The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom.
Page 75 Camera Select the desired light colour. Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco To Change the Mobile Light Mode Set the mobile light according to your purpose. → → → → “Camera” [Options] “Picture Settings” “Mobile Light” “Switch On/ Off” Select the desired mode. “On”...
Page 76 Camera Continuous Shoot You can take continuous shoots in various options. → → → “Camera” [Options] “Camera Modes” “Continuous Shoot” Select the desired mode. The following continuous shoot modes are available: “Off”: The continuous shoots are cancelled. “4 Pictures”/“9 Pictures”: Takes 4 or 9 pictures continuously. After selecting this mode, select the desired speed from the following: “Very Fast”...
Page 77 Camera Note • When you select “Manual” to take continuous pictures, press or the camera key (in the viewer position of the display) manually in the desired speed. • When the Timer and Continuous Shoot functions are simultaneously set, “ ”...
Page 78 Camera Using the Full Screen You can display the preview on the full screen without the soft key area and indicator area. → → “Camera” [Options] “Advanced” Select “Full Viewfinder”. To return to the normal viewfinder, select “Normal Viewfinder”. Selecting the Picture Quality →...
Page 79 Camera Selecting the Storage Memory You can select the location to save the taken pictures in. → → → “Camera” [Options] “Advanced” “Save New Pictures to” Select the desired location from “Handset Memory”, “Memory Card” or “Choice”. Note • If you select “Choice”, select the desired location every time you save. Focus Setting This function enables you to set the focus mode along with the situation for taking a picture.
Page 80 Camera Auto Save You can set the phone to save pictures automatically. → → → “Camera” [Options] “Advanced” “Auto Save” Select “On”. Select “Off” to disable. Using the Help Function → → “Camera” [Options] “Help” Exiting from the Viewer Position of the Display Carry out the following operation when you want to go back from the viewer position of the display to the normal position.
Page 81: Recording Video Clips
Camera Recording Video Clips You can record a video clip with your phone. You can also use this function in the viewer position of the display. Recording Video Clips “Camera” The preview is displayed through the screen. Press Press the camera key in the viewer position of the display. 00:00:00 000KB/095KB To stop recording, press Options...
Page 82 Camera • The sound can be recorded with a video clip if the microphone is turned on. The default setting of the microphone is set to “On”. To record a video clip without the sound, turn off the microphone. For details, see “Recording Video Clips with the Sound” on page 85. Sending Video Clips “Camera”...
Page 83 Camera To Enable or Disable the Optical Zoom The optical zoom enables you to zoom the picture more clearly by the actual zooming action of the optical lens. The optical zoom is used up to the [×2] zooming ratio. If you increase the ratio more than that, it is replaced by the digital zoom.
Page 84 Camera Mobile Light You can record a video clip in various colour modes. → → → → “Camera” [Options] “Video Settings” “Mobile Light” “Light Colour” Select the desired light colour. Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco To Change the Mobile Light Mode Set the mobile light according to your purpose.
Page 85 Camera Note • If you select “For Message” for the recording time, the file size is limited depending on the service provider. Therefore, the quality is also limited for the setting. • “Save and Send” is not displayed after recording in the Extended Video mode. •...
Page 86 Camera Recording Video Clips with the Sound To record a video clip with the sound, the microphone needs to be activated. → → → “Camera” [Options] “Video Settings” “Microphone” Select “On” or “Off”. Note • The microphone is already turned on in the default setting. Select “Off” to record a video clip without the sound.
Page 87 Camera Focus Settings This function enables you to adjust the focus automatically along with the situation for recording a video clip. → → → “Camera” [Options] “Advanced” “Focus Setting” Select the desired option. Focus Mode indicators : Normal : Macro : Manual Focus To Use the Help Function →...
Page 88: Messages
Messages (M 4) Your phone allows you to send and receive text, multimedia and email, and receive WAP alerts as well. Messages Create New Inbox MMS allows you to send and receive multimedia messages of up to 300 KB with images, Drafts sound, or video clips attached.
Page 89 Messages (Email/MMS) Press [Options] and select “Insert Item”, if you wish to attach files. (Email/MMS) Select the desired item. Details are given in the following sections. “Pictures”: Attaches picture files. “Sounds”: Attaches sound files. “Videos”: Attaches video clip files. “Attach Contact”: Attaches Contacts List entries.
Page 90 Messages (Email/MMS) Select the subject field and enter the subject. (MMS/SMS) Transportation type (SMS or MMS) is shown in the field of “Message Type”. Select the field and select the desired transportation type. Select “Advanced” to set the advanced message sending options. •...
Page 91 Messages Note • The current message size displayed while you are creating the message is an approximation. • If a message cannot be sent for some reason, the message stays in the Outbox and the “ ” is displayed during stand-by. •...
Page 92 Messages Select the desired file. If you wish to take new pictures, record sounds or video clips, select “Take Picture”, “Record Sound” or “Record Video”. • (For pictures) For attached pictures, select the appropriate resize option, as the maximum message size for sending varies depending on the network operator. •...
Page 93 Messages To Add a Slide Show In Step 2 in “Creating a New Message” on page 87, select “Options” and select “Add Slide”. If you wish to add more slides, select “Add Slide Before” or “Add Slide After”. Enter the message. If you wish to set the duration of each slide, press [Options] and select “Slide duration”, then select the desired duration.
Page 94 Messages Reading MMS Messages you receive are saved in the Inbox. To View Messages Before Downloading The MMS indicator ( ) is displayed when you are receiving an incoming message. → “Inbox” Select the message alert you wish to view. •...
Page 95 Messages Downloading a Single MMS → “Inbox” Highlight the message alert ( ) you wish to download. Press [Options] and select “Download”. The downloading starts and the indicator becomes • You can download multiple messages at the same time. See the next section. Downloading Multiple MMS →...
Page 96 Messages Forwarding a Message → “Inbox” Highlight the message you wish to forward. Press [Options] and select “Forward”. Perform steps 2 to 9 in “Creating a New Message” on page 87. Remote Forward You can transfer your email messages saved in the mail server directly to other recipients. →...
Page 97 Messages Sending a Picture File with Postcard Your phone allows you to send multimedia messages to a Vodafone specific Postcard service centre that prints the picture and mails it to the recipient’s home address specified in the MMS message. (Your phone is initially provided with the address of a Vodafone specific Postcard service centre, and its address cannot be changed.) Note •...
Page 98 Messages Note • The items “Name”, “Address” and “City” are necessary to complete sending Postcards. • Information for a recipient “Name” (mandatory): Name of the recipient for a postcard up to 50 characters “Additional Information” (optional): Additional information of the recipient up to 50 characters “Address”...
Page 99: Cell Broadcasts
Messages Cell Broadcasts (M 4-10) You can receive cell broadcast messages or general messages such as weather forecasts and traffic reports. This information is broadcast to subscribers in certain network areas. This function may not be available on all mobile phone networks. Contact your network operator for more information.
Page 100 Messages Select the desired language. Press [Save]. Subscribing to Cell Broadcasts Select the page of the cell broadcast message that you want. → → → → “Messages” “Cell Broadcasts” “Settings” “Set Info Subjects” [Options] Select “Add/Remove”. Select the desired page. Press [Back].
Page 101: Area Info
Messages Area Info (M 4-11) The Area Info is the message information that operators send to subscribers in certain areas. When you receive Area Info, the message (area code) is displayed during stand-by. Note • This function may not be available on all mobile phone networks. Contact your network operator for more information.
Page 102: Setting Up Mms/Sms/Email
Messages Setting Up MMS/SMS/Email (M 4-12) General Settings → → “Messages” “Settings” “General Settings” Select the item you wish to set up. • “Home Download” (“Always download”, “Always defer”): Controls message download timing inside your network area. “Always download”: Downloads messages immediately from the server. “Always defer”: Defers message download.
Page 103 Messages • “Delivery Rep. Allow”: Enables or disables Delivery Rep. Allow when receiving a message, which applies to the Delivery Report function. • “Auto Delete” (“None”, “Inbox”, “Sent”, “Both”): Deletes the oldest message automatically, when the Inbox, Sent or both (Inbox and Sent) is full.
Page 104 Messages • “Message Format”: Select the message format to be used when creating a new message. • “Optimisation”: When set “On” (default), double-byte characters such as European characters with an accent are converted into single-byte characters and sent. When “Off”, double-byte characters are sent as displayed. Please note that you may be charged double for double-byte characters sent in an SMS when Optimisation is set “Off”.
Page 105 Messages Email Settings → → “Messages” “Settings” “Email Settings” Select the item you wish to set up. • “Download Interval”: Sets the download interval. • “Max Message Size”: Defines the maximum size of messages that are downloaded.
Page 106: Vodafone Live
Vodafone live! (M 2) Your phone is already configured to access Vodafone live! and the mobile internet*. Vodafone live! is a new mobile internet portal which is your gateway to a new world of information, games, music and services. Because your phone uses 3G (UMTS), it has a system that is much faster than previous ways of getting mobile information.
Page 107: Starting The Wap Browser
Vodafone live! Starting the WAP Browser Press C during stand-by. To Exit the WAP Browser Press F to exit the browser. Navigating a WAP Page • a b c d: Move the highlights around in the screen. • Executes the option displayed in the lower centre of the screen. •...
Page 108 Vodafone live! Browser Menu To Edit Favourites → → [Options] “Bookmarks” Select the desired URL, and press [Options]. You can edit the list of Bookmarks by the following options: “Select”: Selects a bookmark. “Details”: Displays detailed information of the WAP page. “Send page”: Sends the URL address to recipients.
Page 109 Vodafone live! The Browser Options You can use various options of the WAP browser. → [Options] “Select”: Selects a WAP page. “Home”: Goes to the homepage. “Bookmarks”: (see page 107.) “Mark Page”: Marks the selected WAP page. “Save items”: Saves items from WAP pages. “Go to URL”: Goes to the WAP page that you enter the URL address.
Page 110 Vodafone live! “Search This Page”: Searches specific words in the WAP page. “Alert Inbox”: Displays WAP Push alerts. “Copy Text”: Copies the text on the web page. “Settings”: Displays the Settings menus. “Restart browser”: Restarts the browser. “About”: Displays the browser information. Browser Settings →...
Page 111: Media Player
Media Player (M 3) Media Player can play sound files and video clip files by switching between two applications: Music Player and Video Player. These applications can handle files in MP4 and 3gp (video clip, sound) format. While playing back sound files in the background, you can use other menus.
Page 112 Media Player • You can return to the Main menu screen while playing back the file in the background. • You can create your playlist listing only the desired files (p. 113). • You can make tone adjustment in step 1. Press [Options] and select “Tone Control”. Select from “Normal”, “Bass”, “Surround”...
Page 113 Media Player Press [Options] and select “Add to Playlist”. The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist” on page 113. Select the desired folder. Press The file highlighted in step 1 is saved. To delete the playlist, highlight the playlist and press [Options].
Page 114: Video Player
Media Player Adding a New Playlist “Media Player” Press [Options] and select “Open Music”. Select “Handset Memory” or “Memory Card”. Press [Options] and select “Add New Playlist”. Enter the desired playlist name. Press Video Player Playing Back Video Clip Files “Media Player”...
Page 115 Media Player Searching a File to Be Played Back “Media Player” Press [Options] and select “Search”. Enter the first few letters of the title. Search results are displayed in alphabetical order and the matching file is highlighted. Adding a File to the Playlist You can create a playlist registering desired files.
Page 116 Media Player Streaming You can play back video clip files while downloading them from the mobile network. You can also register the address of the Web site as a bookmark. “Media Player” Press [Options] and select “Streaming”. Select from “Enter URI”, “Favourites”, “Access Log” or “Display Size”. “Enter URI”: Enter the desired address of the Web site.
Page 117 Media Player Editing the Video Clip File “Media Player” Select the file you wish to edit. Press [Options] and select “Edit”. Select the desired option. “Crop”: Select the desired area to be cropped. “Subtitle”: Create a subtitle to add to the file. Backlight “Media Player”...
Page 118: My Items
My Items (M 6) My Items contains several types of picture, sound and video clip data. Also included in My Items are frequently used text message phrases and accessed WAP pages (addresses) My Items which you can use. You can also transmit picture, sound and video clip data via infrared or Pictures Bluetooth wireless technology to OBEX-enabled phones.
Page 119: Pictures
My Items Pictures (M 6-1) Pictures that are taken by a digital camera or images that are downloaded from mobile Pictures Internet sites can be managed. You can register pictures in the following formats: JPEG, PNG, WBMP and GIF. Get new Viewing Pictures 04-09-30_09…...
Page 120 My Items Saving an Image to Contacts List Entries You can use this option only for pictures saved in the handset memory. → “My Items” “Pictures” Highlight the file you wish to add to Contacts List. Press [Options] and select “Add to Contact”. To overwrite, select the data you wish to save.
Page 121 My Items Adjusting the Size You can adjust the picture to an appropriate size depending on the scene. → “My Items” “Pictures” Highlight the file you wish to adjust the size of. Press [Options] and select “Resize”. Select the desired option. Each option resizes the picture for each use.
Page 122 My Items Sending a Picture File → “My Items” “Pictures” Highlight the file you wish to send. Press [Options] and select “Send”. Select the desired option. For details on creating a message, see “Creating a New Message” on page 87. Note •...
Page 123 My Items Using Multiple Select You can select more than one file for moving, copying and deleting. Pictures Note • The following procedure applies when the entries other than “Get new” are highlighted. 04-09-30_09… → → → → 01/01/00 00:00 10KB “My Items”...
Page 124 My Items To Delete the File → “My Items” “Pictures” Highlight the desired file. Press [Options] and select “Delete”. To See the Picture Details → “My Items” “Pictures” Highlight the file of which you wish to view the detail information. Press [Options] and select “Details”.
Page 125: Videos
My Items Downloading Picture Files → → “My Items” “Pictures” “Get new” The picture file download site is displayed. • For details on transmitting My Items data, see “Sending My Items Data” on page 137. (M 6-2) Videos Video clips that are recorded by a video camera or video clips that are downloaded from mobile Internet sites can be managed.
Page 126 My Items Sending a Video Clip File → “My Items” “Videos” Highlight the file you wish to send. Press [Options] and select “Send”. Select the desired option. For details on creating a message, see “Creating a New Message” on page 87. Note •...
Page 127 My Items Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder. Select the desired folder to move. “Copy”: Copies the file. Select the desired folder to copy. “Create Folder”: Creates a new folder.
Page 128 My Items To Sort the Files Note • The following procedure applies when the entries other than “Get new” are highlighted. → → → → “My Items” “Videos” [Options] “Advanced” “Sort” Select the desired order. To Rename the File → “My Items”...
Page 129 My Items Uploading Video Clip Files You can upload your video clips to the live! Studio. Note • This service is not available with some service providers. Please contact your service provider for more information. → “My Items” “Videos” Highlight the file you wish to upload. Press [Options] and select “Send”.
Page 130: Sounds & Ringtones
My Items Sounds & Ringtones (M 6-3) The downloaded sound files and the AMR data recorded by Voice Recorder are managed in Sounds & Ringtones. The default ringtones are not contained within Sounds & Ringtones. Only the sound files you can play back with the phone are stored in Sounds & Ringtones. Playing Back Sound Files →...
Page 131 My Items Using the Sound Files as a Ringtone → “My Items” “Sounds & Ringtones” Highlight the file you wish to use as a ringtone. Press [Options] and select “Set as Ringtone”. Note • The formats that can be used for ringtones are SMAF, MIDI (SMF, SP-MIDI), MP3, MP4 and XMF.
Page 132 My Items Operating the Files You can copy, move, sort, rename, and delete the saved sound files. → “My Items” “Sounds & Ringtones” Highlight the desired file. Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder.
Page 133 My Items To Sort the Files Note • The following procedure applies when the entries other than “Get new” are highlighted. → → → → “My Items” “Sounds & Ringtones” [Options] “Advanced” “Sort” Select the desired order. To Rename the File →...
Page 134 My Items Uploading Sound Files You can upload your sounds to the live! Studio. Note • This service is not available with some service providers. Please contact your service provider for more information. → “My Items” “Sounds & Ringtones” Highlight the file you wish to upload. Press [Options] and select “Send”.
Page 135: Games & More
My Items Games & More (M 6-4) Along with the preloaded application, downloaded applications are saved in Applications. Using Applications Various kinds of Vodafone specific applications can be used on this phone. To use applications, download the applications via the mobile Internet. Some applications offer the ability to connect to a network either within a game or a network based application.
Page 136 My Items Executing Applications → “My Items” “Games & More” Downloaded applications are sequentially displayed from the latest one. Select the title of the application you wish to execute. The selected application is executed. When using network connection type applications, connection to the network can be selected.
Page 137 My Items More Games → → “My Items” “Games & More” “More Games” Select the application you wish to download. The confirmation screen is displayed after various WAP browser screens. Press to start downloading. Press when finished. Activating Files with Copyright Protection (DRM) Some pictures, sound files, and video clips have a digital copy protection program, which is called DRM (Digital Rights Management).
Page 138 My Items Sending My Items Data Choose the appropriate menu. → “My Items” “Pictures” → “My Items” “Sounds & Ringtones” → “My Items” “Videos” → “My Items” “Other Documents” Highlight the desired file. Press [Options] and select “Send”. Select “Via Bluetooth” or “Via Infrared”. For “Via Bluetooth”...
Page 139: Bookmarks
My Items Receiving the My Items Data When the phone receives the My Items data, a confirmation message is displayed during stand-by. Press [Yes]. The received data is saved in the corresponding My Items folder. • For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 206. Bookmarks (M 6-5) You can store desired (or frequently used) pages (addresses) in Bookmarks.
Page 140: Text Templates
My Items Text Templates (M 6-7) You can register up to 50 text templates for use in text messages and multimedia messages. The maximum capacity of the text templates is 100 KB. Adding Phrases to Text Templates → → “My Items” “Text Templates”...
Page 141: Other Documents
My Items Sending Text Templates → “My Items” “Text Templates” Highlight the text template you wish to send. Press [Options] and select “Send Template”. Other Documents (M 6-8) Some types of files excluding picture files are stored in the Other Documents folder of the phone.
Page 142 My Items Operating the Files You can copy, move, sort, rename, and delete the saved documents. → “My Items” “Other Documents” Highlight the desired file. Press [Options] and select “Advanced”. Select the desired option according to your purpose. “Move”: Moves the files to another folder. Select the desired folder to move.
Page 143 My Items To Sort the Files → → → → “My Items” “Other Documents” [Options] “Advanced” “Sort” Select the desired order. To Rename the File → “My Items” “Other Documents” Highlight the desired file. Press [Options] and select “Rename”. To Delete the File →...
Page 144: Games & More
Games & More (M 1) Games (M 1-1) The list of Java™ applications is displayed. Games & More Downloaded applications are displayed in order starting from the latest one. Games Screensavers Executing Applications Settings For details on executing applications, see “Executing Applications” on page 135. Java™...
Page 145 Games & More “Write User Data”: Sets security to write entries in your phone, such as Contacts List entries, mailbox (Inbox) and My Items data. “Use Multimedia”: Sets security to use the barcode scanning function. “Location Access”: Sets security to update the positioning function. “Reset”: Clears all the above settings.
Page 146: Screensavers
Games & More Viewing Application Information You can check the information of Java™ applications. → “Games & More” “Games” Highlight the desired Java™ application. Press [Options] and select “Information”. Deleting an Application You can delete an application from the handset memory. →...
Page 147: Settings
Games & More Set Applications → → “Games & More” “Screensavers” “Set Applications” The downloaded applications are displayed. Select the desired screensaver application. Settings (M 1-3) Application Volume You can set the volume of the application such as the sound effect to one of the five levels or silent.
Page 148 Games & More To Set the Blinking Operation This setting enables the backlight to be controlled by the application. If set to “Off”, the backlight cannot be turned on from the application. → → → “Games & More” “Settings” “Backlight” “Blink”...
Page 149: Java™ Information
Games & More Calls & Alarms You can set the priority of incoming calls and alarms while an application is operating. → → “Games & More” “Settings” “Calls & Alarms” Select “Incoming Call”, “Video Call”, “Incoming Message” or “Alarm”. Select the desired method. •...
Page 150: Organiser
Organiser (M 7) Calendar (M 7-1) Calendar allows you to easily schedule appointments or events, which are associated with the date and time. Bluetooth These entries can also be sent via infrared or wireless technology to a PC to share the same schedules.
Page 151 Organiser Select “Repeat” and select the desired option. Select “Description” and enter a memo for the schedule entry. Select “Secret” and select “On” or “Off” to make it secret data. Press [Save]. Note • If the date and time settings have not been made, the date and time entry screen is displayed (p.
Page 152 Organiser Receiving a Schedule Entry When the phone receives a schedule entry, a confirmation message is displayed during stand-by. Press [Yes]. The received entry is saved in the Calendar. Press [No] to reject. • For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on page 206.
Page 153 Organiser Press [Options] and select “Edit”. Select the desired item and modify the entry. Press [Save]. Deleting Schedule Entries In the monthly or daily view, press [Options] and select “Delete”. Select the desired option. “This Appointment” (daily view only): Deletes the selected appointment. “All This Day”: Deletes all entries for the selected day.
Page 154: Alarms
Organiser Alarms (M 7-2) Setting the Alarms The alarm function allows you to be alerted at a specified time. Note that you need to set the current date and time before setting the alarm function if it has not been done already. Note •...
Page 155 Organiser To Change the Type of Video On the Set Alarm screen, select “Assign Tone/Video”. Select “Assign Alarm Video”. Select the desired video. To Change the Snooze of the Alarm Tone On the Set Alarm screen, select “Snooze”. Select the desired snooze option. To Change the Alarm Volume On the Set Alarm screen, select “Alarm Volume”.
Page 156: Calculator
Organiser Resetting an Alarm Setting → “Organiser” “Alarms” Highlight the alarm you wish to reset. Press [Options] and select “Reset Alarm”. Resetting All Alarm Settings → → “Organiser” “Alarms” “Clear All” Calculator (M 7-3) The calculator function performs the 4 arithmetic calculations using up to 12 digits. →...
Page 157 Organiser Rate Conversion You can also use the calculator as a currency calculator to convert from/to a home currency using a conversion rate that you enter. To Set a Currency Conversion Rate → → → → “Organiser” “Calculator” [Options] “Currency Converter” “Exchange Rate”...
Page 158: Voice Recorder
Organiser Voice Recorder (M 7-4) This allows you to record a voice clip, which can be used to remind you of schedule entries or be sent within a multimedia message. The recorded voice clip is saved in Saved Sounds. Voice clips are saved in .amr format. Recording a Voice Clip →...
Page 159: Scanner
Organiser Viewing Record Time → → → “Organiser” “Voice Recorder” [Options] “Record Time” Select “For Message” or “Extended Voice”. When selecting “Extended Voice”, you can save the voice clip only in a memory card automatically. Selecting Storage Memory → → →...
Page 160 Organiser Select the desired option. The options vary depending on the scanned data. “Open Link”: The browser opens the URL. “Copy URL”: The URL is copied. “Send Massage”: The result is sent as SMS or MMS. “Copy”: The result is copied. Using the Scanning Options In the scanning mode, press [Options] and select the desired option.
Page 161 Organiser Creating QR Codes You can create QR codes using texts and My Items data. Scanner → → “Organiser” “Scanner” “Create QR Code” Scan Barcode Select the desired option. Open Barcode “Text Input”: Create a QR code using the text you enter. Create QR Code “My Items”: Create a QR code using the My Items data.
Page 162 Organiser Press [Options] and select the desired option. “OK”: The scanned result is in the text entry screen. “Select/Edit”: The scanned result can be modified. “Change Mode”: The scanned result can be converted to a web address, mail address, phone number or to roman text. Using the Scanning Options In the scanning mode, press [Options] and select the desired option.
Page 163: Stopwatch
Organiser Renaming the Scanned Data → → “Organiser” “Scanner” “Scanned Results” Highlight the data you wish to rename. Press [Options] and select “Rename”. Checking the Information of the Scanned Data → → “Organiser” “Scanner” “Scanned Results” Highlight the data the information of which you wish to check. Press [Options] and select “Information”.
Page 164: Tasks
Organiser Tasks (M 7-7) You can register your schedule as task entries which are associated with the date and time. Creating a New Entry → “Organiser” “Tasks” Select “Add New Entry”. Enter the subject. Enter the due date and then due time. Select the reminder option.
Page 165 Organiser To Change the Type of Alarm Tone On the Reminder screen, select “Assign Tone/Video”. Select “Assign Tone”. Select “Preset Sounds” or “My Sounds”. Select the desired tone. For details on selecting a tone, see “Assigning a Ringtone” on page 173. To Change the Type of Video On the Reminder screen, select “Assign Tone/Video”.
Page 166 Organiser Sending a Task Entry → “Organiser” “Tasks” Highlight the task entry you wish to send. Press [Options] and select “Send”. Select the desired option. “As Message”: Sends the entry as a message. “Via Bluetooth”: Sends the entry through Bluetooth connection. “Via Infrared”: Sends the entry through Infrared connection.
Page 167: World Clock
Organiser Deleting Entries → → → “Organiser” “Tasks” [Options] “Delete” Select the desired option. “This Task”: Deletes the selected entry. “All Completed Tasks”: Deletes all checked entries. “All Tasks”: Deletes all entries. World Clock (M 7-8) Setting the Time Zone →...
Page 168: Countdown Timer
Organiser To Set the Custom Time Zone → “Organiser” “World Clock” Press [Edit]. Select “Set Time Zone”. The current time zone is indicated on the world map. Press [Options] and select “Set Custom Zone”. Enter the desired city name and time. Setting the Daylight Saving →...
Page 169: Expenses Memo
Organiser If the countdown has finished, press [Cancel] and then press to start the countdown again. Editing the Countdown Time In the countdown start screen, press [Options] and select “Edit”. Modify the desired time. Expenses Memo (M 7-10) You can record an expenses memo with predefined or edited categories. Recording in the Expenses Memo →...
Page 170: Phone Help
Organiser To Delete a Recorded Item In the total view, select the desired item. Press [Options] and select “Delete Item”. The selected item is deleted from the list. To Delete All Items In the total view, select the desired item. Press [Options] and select “Delete All”.
Page 171: Sim Application
SIM Application (M 9) You can refer to the information on the SIM/USIM. Contact your service provider for further details.
Page 172: Settings
Settings (M 12) Profiles (M 12-1) The tone sound and vibration settings can be customised for each profile according to your Settings environment. Profiles There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”, “Headset” and “Silent”. Display Settings Sound Settings Activating a Profile Time &...
Page 173 Settings Resetting Profile Settings → “Settings” “Profiles” Highlight the profile you wish to reset. Press [Options] and select “Set to Default”. Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code”...
Page 174 Settings • You can select from two levels or an increasing volume, when selecting the “Silent” profile. Assigning a Ringtone You can select the ringtone from 28 tones including 5 patterns, 13 sound effects and 10 melodies. You can also select a sound in Saved Sounds as the default ringtone excluding the AMR or WAVE format.
Page 175 Settings Note • Even if you delete a ringtone that uses a sound in Saved Sounds, the setting remains the same and the default ringtone sounds. If you delete a ringtone assigned for the ringtone, the default ringtone is set. Assigning a Ring Video Clip File You can select a video clip file in Saved Videos as the default ring video clip file.
Page 176 Settings Message Notification When receiving messages, your phone will notify you of their arrival with the ringtone or ring video you specify. → “Settings” “Profiles” Highlight the profile you wish to customise. Press [Options] and select “Personalise”. Select “Ringtone/Ringvideos”. Select “For New Message”. Select “Assign Tone”...
Page 177 Settings Select “System Sounds”. Select “Keypad Tones”. Highlight the desired tone pattern. Press [Options] and select “Assign”. Vibration When the vibrator option is set on, the phone will vibrate for incoming calls regardless of the ringer volume and ringtone settings. →...
Page 178 Settings External Light Colour You can select from 7 colours and 1 pattern for each profile and change it during an incoming call. → “Settings” “Profiles” Highlight the profile you wish to customise. Press [Options] and select “Personalise”. Select “External Light”. Select “For Voice Call”, “For Video Call”...
Page 179: Setting The Display
Settings Setting the Display (M 12-2) You can change the settings of the main and sub displays. Setting the Main Display Wallpaper For the stand-by screen, 5 pictures are provided. Pictures taken with the digital camera or images downloaded from a WAP site can be used for wallpapers.
Page 180 Settings Assigning the Pictures Pictures can be displayed when turning the power on or off, when receiving an incoming call, or when operating the alarm. Pictures taken with the digital camera or images downloaded from a WAP site can be used. To Set Built-in Pictures →...
Page 181 Settings Note • Some pictures cannot be used because of their picture and data types. • If the picture in My Pictures is already set, it is displayed in step 2. Press [Change] and select the desired picture. Setting the Font Weight You can change the font weight displayed on the screen.
Page 182 Settings Showing the Clock You can display the calendar or the current date and/or time during stand-by. To Set the Clock Display → → → “Settings” “Display Settings” “Clock & Calendar” “Show Clock” Select the desired clock type or “Off” to set clock display off. •...
Page 183 Settings Adjusting the Brightness of the Backlight You can adjust the brightness of the backlight of the screen between 4 levels. → → “Settings” “Display Settings” “Brightness” Press a (Light) and b (Dark) for maximum clarity. Press Setting the Display Saving The screen of this phone will automatically turn off after a given amount of time.
Page 184 Settings Setting Video Out With the optional cable, you can connect your phone to other device, such as TVs or videos set to output, and display images or video clips stored on your phone. It is also possible to output and display data stored in the memory card. To Set Output Function On You need to connect your phone to the other device with the optional cable beforehand.
Page 185 Settings To Select TV System You need to select the appropriate TV system. Refer to the instruction manual of your connected device to confirm the TV system. → → → “Settings” “Display Settings” “Video Output” “TV System” Select the desired item. Setting the Sub Display To Turn On/Off the Sub Display Display Settings...
Page 186: Sound Settings
Settings To Set Incoming Indication Caller number or registered caller name can be displayed on the external display when receiving an incoming call. → → → “Settings” “Display Settings” “Sub Display” “Caller Display” Select “On” or “Off”. Sound Settings (M 12-3) You can use this menu to check or edit the current Profiles settings (except “Any Key Answer”).
Page 187 Settings Selecting the Time Format → → “Settings” “Time & Date” “Time Format” Select “24 Hour” or “12 Hour”. Selecting the Date Format → → “Settings” “Time & Date” “Date Format” Select from “D.M.Y”, “M-D-Y” or “Y/M/D”. Setting the Daylight Saving →...
Page 188: Language Setting
Settings Setting the Calendar Format → → “Settings” “Time & Date” “Calendar Format” Select “Sunday-Saturday” or “Monday-Sunday”. Language Setting (M 12-5) You can change the language that the phone uses to display messages. → “Settings” “Language” Select the desired language. •...
Page 189: Call Settings
Settings Call Settings (M 12-6) Set various types of functions and services for voice calls. Diverts Note • This service may not be available on all mobile phone networks. Contact your network operator for more information. This service is used to divert incoming calls to your voice mail system or to another phone number depending on certain conditions in which you cannot answer a call.
Page 190 Settings Enter a phone number to which you wish to divert calls or search for it in the Contacts List (p. 63). Press Select the period of time from 6 levels (05 to 30 seconds). Note • When a divert is set to “Voice calls” of “All Calls”, “ ”...
Page 191 Settings Call Waiting Note • This service may not be available on all mobile phone networks. Contact your network operator for more information. If you wish to be able to receive another incoming call while you have a call in progress, you must activate the Call Waiting service.
Page 192 Settings Call Information With this setting On, the information of an incoming call is displayed. → → “Settings” “Call Settings” “Display Call Info” Select “On” or “Off”. Restrict Calls This function lets you place restrictions on incoming and outgoing calls. To activate this option you will need the specified password, which is available from your service provider.
Page 193 Settings (For “Incoming Calls”) “Bar All Incoming Calls”: Restricts all incoming calls. “Bar if Abroad”: Restricts all incoming calls when you are outside of the coverage from your registered network operator. Select one of the following options: (For “Outgoing Calls” and “Incoming Calls”) “All Services”: Restricts all services.
Page 194 Settings Fixed Dialling No. When the Fixed Dialling No. is enabled, you can only call pre-registered numbers. To Enable Fixed Dialling No. → → → → “Settings” “Call Settings” “Restrict Calls” “Fixed Dialling No.” “Switch On/Off” Select “On” to enable this function. To Add a New Name →...
Page 195 Settings To Register the Rejected Number → → → → “Settings” “Call Settings” “Restrict Calls” “Rejected Numbers” “Set Rejecting Number” Select a blank field. Enter the desired number. Changing the Network Password → → → “Settings” “Call Settings” “Restrict Calls” “Change N/W Password”...
Page 196: Video Call Settings
Settings Video Call Settings (M 12-7) Set various types of functions and services for video calls. Selecting an Image for the Alternative Image You can select your image to be sent through the internal camera from the saved picture files. Turning On or Off the Speakers →...
Page 197 Settings Mute You can mute the microphone while making a video call. → → “Settings” “Video Call Settings” “Mute Microphone” Select “Unmute Microphone” to cancel the mute. Assigning Hold Guidance Picture You can display an image saved in the phone on your main display while you are putting a call on hold.
Page 198: Security
Settings Security (M 12-8) Enabling/Disabling the PIN Code If the PIN code is enabled you are asked to enter the PIN code each time the phone is switched on. Your PIN code is registered on the SIM/USIM card and you should have been made aware of the code when you purchased the SIM/USIM card.
Page 199 Settings Changing the PIN2 Code The PIN2 code is used to protect certain functions in the phone such as Fixed Dialling No. and call cost limits. The following shows you how to change the PIN2 code. → → “Settings” “Security Settings” “Change PIN2”...
Page 200 Settings To Change the Handset Code Before you change the handset code, select “On” in step 1 in “Handset Lock”. → → “Settings” “Security Settings” “Change Handset Code” Enter the old handset code. Enter a new handset code. Enter the new handset code again. Phone Lock By setting this option on, your phone will lock the keypad until the correct handset code is entered.
Page 201: Memory Settings
Settings Showing Secret Data By setting this option on, the hidden data can be displayed. → → “Settings” “Security Settings” “Show Secret Data” Select “On” to display or “Off” to hide. Memory Settings (M 12-9) Viewing the Memory Status → →...
Page 202: Master Reset
Settings Master Reset (M 12-10) You can reset M5 and M12 settings or all settings from M1 to M12 and all created data. Resetting M5 and M12 Settings → → “Settings” “Master Reset” “Reset Settings” Enter your handset code. The default handset code is “9999”. For details on changing the handset code, see “To Change the Handset Code”...
Page 203: Call Log
Call Log (M 11) The phone will record the last 10 missed calls, received calls and dialled numbers. Viewing Call Log Call Log “Call Log” All Calls Missed Calls Select from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”. Received Calls The selected call log list is displayed.
Page 204: Call Timers
Call Log Deleting a Call Log In the call log list, press [Options] and select “Delete”. Call Timers (M 11-5) This function lets you check the duration of your calls. Checking the Duration of the Last Call and All Calls →...
Page 205: Call Costs
Call Log Call Costs (M 11-6) Some networks do not support This function lets you check the charges for your calls. Charging Advice. Please check with your service provider for availability. Checking the Cost of the Last Call → → “Call Log”...
Page 206 Call Log Setting the Charge Limit This function is useful if you wish to make sure you do not exceed a certain charge limit. → → → “Call Log” “Call Costs” “Max Cost” “Set Limit” Enter your PIN2 code. Enter a value. Checking the Residual Credit →...
Page 207: Connectivity
Connectivity (M 10) Bluetooth By configuring the settings in this menu, you can connect to wireless technology Bluetooth or infrared enabled phones via these connections, as well as a PC via wireless Connectivity technology or infrared connections. Bluetooth Infrared Bluetooth (M 10-1) Network Settings Bluetooth...
Page 208 Connectivity To Search for Devices to be Paired → → “Connectivity” “Bluetooth” “Search for Devices” The phone starts searching for devices within 10 metres. A maximum of 16 devices can be searched for and listed on the displayed. Select the desired device for pairing. Enter the device passcode.
Page 209 Connectivity • You can save battery power by turning the Bluetooth wireless function off while it is not in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 206 or in “To Turn Off Automatically” on page 211. •...
Page 210 Connectivity Paired Devices You can rename and delete the paired device in the list. → → “Connectivity” “Bluetooth” “Paired Devices” Highlight the desired device. Press [Options]. Select “Change Name” or “Delete”. You can rename or delete by pressing after selecting desired device. To Send All Data to Other Devices You can send all the data for applications such as Contacts List, Calendar, Tasks or etc.
Page 211 Connectivity Enter the device passcode for unpaired devices. Select the desired data to send. Note • If the handsfree device is connected, the confirmation screen to deactivate the handsfree function is displayed. Press [Yes] to deactivate. Bluetooth Wireless Settings With this setting you can rename your phone, prevent other phones from recognising your phone, turn the Bluetooth wireless function off automatically to save battery power, etc.
Page 212 Connectivity To Turn Off Automatically → → → “Connectivity” “Bluetooth” “Bluetooth Settings” “Bluetooth Timeout” Select the desired time. Your phone turns the function off automatically in the specified time. To Switch the Handsfree Settings You can switch modes of the handsfree kit between two modes; talking with the handsfree kit or talking with the phone.
Page 213: Infrared
Connectivity Infrared (M 10-2) In order to use the infrared function, you need to search for other infrared enabled devices to establish contact with your phone. Keep your phone within a distance of 20 centimetres before searching. The infrared setting will return to off when no data is transmitted/received via infrared communication.
Page 214: Network Settings
Connectivity Network Settings (M 10-3) System Settings To Select a System Automatically Each time the power is turned on, your phone always performs the selected system. → → “Connectivity” “Network Settings” “System Settings” Select “Auto”. To Set the System Manually →...
Page 215 Connectivity To Set the Network Manually → → → “Connectivity” “Network Settings” “Network Settings” “Select → Network” “Manual” Select the desired network. To Add a New Network → → → “Connectivity” “Network Settings” “Network Settings” “Select → Network” “Add New Network” If there are no entries, press and go to step 2.
Page 216 Connectivity To Change the Position of a Network in the Preferred List → → → “Connectivity” “Network Settings” “Network Settings” “Select → Network” “Set Preferred” Select the name of the network you wish to change the position in the list. Select “Insert”...
Page 217: Internet Settings
Connectivity Internet Settings (M 10-4) Note • In normal operations, you do not need to change the settings. • Internet settings have already been made in your phone depending on your network operator. You may have restrictions on viewing, deleting, copying or modifying the settings.
Page 218 Connectivity → → “Connectivity” “Internet Settings” “Re-Provisioning Settings” Re-Provisioning Settings “Execute Pending”: Updates provisioning data. → → “Connectivity” “Internet Settings” “Clear DNS Cache” Clears the DNS cache. → → “Connectivity” “Internet Settings” “White List” White List: “SMSC Address”: SMSC address “SM Originating Address”: SM originating address Application Settings...
Page 219 Connectivity Email Settings “Account Name”: Email account name (Unique name) “POP3”: Server name, user ID, password and port number for POP3 server “SMTP”: Server name, user ID, password, port number for SMTP server and SMTP Authentication “Access Point”: Access point for email “Email Address”: Email address Streaming Settings...
Page 220 Connectivity To Edit the WAP/MMS/Email/Streaming Profile → → “Connectivity” “Internet Settings” “Application” Select “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming Settings”. Highlight the desired profile. Press [Options] and select “Edit”. Edit the desired item. To Copy the WAP/MMS/Email/Streaming Profile →...
Page 221: Backup/Restore
Connectivity Backup/Restore (M 10-5) With a memory card inserted in your phone, you can make backup files of Bookmarks, Text, Contacts, Calendar and Tasks in the handset memory card to the memory card. You can also restore the backup data from the memory card. Making a Backup File on the Memory Card →...
Page 222 Connectivity Restoring a Backup File → → “Connectivity” “Backup/Restore” “Restore” Enter your handset code. Press [OK]. Select the desired item. Select the desired file to restore. A confirmation message indicates deletion from the memory card is displayed on the screen. Press [Yes].
Page 223 Connectivity To Delete a Backup File → → “Connectivity” “Backup/Restore” “Restore” Enter your handset code. Press [OK]. Select the desired item. Highlight the desired file. Press [Options] and select “Delete”. A confirmation message to delete the selected file is displayed on the screen. Press [Yes].
Page 224: Connecting 902Sh To Your Pc
Connecting 902SH to Your PC You can use the following functions by connecting the 902SH to your PC using an infrared Bluetooth port, USB port* or wireless technology port: • 3G/GSM GPRS modem • Handset Manager for 902SH * Requires an optional USB data cable XN-1DC30 for USB port connection.
Page 225: 3G/Gsm Gprs Modem
Connecting 902SH to Your PC 3G/GSM GPRS Modem You can use 902SH as a 3G/GSM GPRS modem to access the Internet from your PC. Bluetooth Connect your phone to your PC via wireless technology or USB interface. Software installation on your PC is required. For details, see “Software Installation” on page 225.
Page 226: Handset Manager
• Contacts List entries • Schedule entries To use the Handset Manager function, see “Connecting 902SH to Your PC” on page 223 and set your phone to Data Transfer mode. For details on software support, refer to the following site: http://www.sharp-mobile.com...
Page 227 • Infrared ports need to be placed within 20 cm of each other and within a 30° angle. 3G/GSM GPRS modem • It is not recommended that you make or answer calls when you are using 902SH as a 3G/GSM GPRS modem. The operation may be interrupted.
Page 228: Troubleshooting
Troubleshooting Problem Solution • Make sure the battery is properly inserted and charged. The phone does not turn on. • Make sure you have entered the correct code (4 to 8 digits). • Your SIM/USIM card/protected functions will become locked after three unsuccessful attempts. PIN code or PIN2 code is rejected.
Page 229 Troubleshooting Problem Solution • Check where your account has been registered and where the service is available. Cannot access network service. • Make sure you are correctly subscribed for the Short Message Service, that the network supports this Cannot send or receive text message. service, and that the centre number is set up correctly.
Page 230: Safety Precautions And Conditions Of Use
Safety Precautions and Conditions of Use Your phone conforms to international regulations insofar as it is used under normal conditions and in accordance with the following instructions. CONDITIONS OF USE Electromagnetic waves • Do not switch on your phone aboard an aircraft (as your phone may interfere with the aircraft’s electronic systems).
Page 231 Safety Precautions and Conditions of Use Caring for your phone • Do not allow children to use your phone without supervision. • Do not open or attempt to repair your phone yourself. The product can only be repaired by authorised service personnel. •...
Page 232 Safety Precautions and Conditions of Use Battery • Use your phone only with batteries, chargers and accessories recommended by the manufacturer. The manufacturer disclaims any liability for damage caused by the use of other chargers, batteries or accessories. • Network configuration and phone usage will affect talk-time and stand-by time.
Page 233 Safety Precautions and Conditions of Use • The battery can be charged and discharged hundreds of times but it will eventually wear out. When the operating time (talk-time and stand-by time) is noticeably shorter than normal, it is time to buy a new battery. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE,...
Page 234 Safety Precautions and Conditions of Use • Use only the aerial supplied or one approved by Sharp for your mobile phone. Using unauthorised or modified aerials may damage the mobile phone. Moreover, since the mobile phone may violate the appropriate regulations, it may lose performance or exceed the limitation of SAR levels.
Page 235 Safety Precautions and Conditions of Use Camera Operation • Learn picture quality, file formats, etc. beforehand. The taken pictures can be saved in JPEG format. • Be careful not to move your hand while taking pictures. If the phone moves while taking a picture, the picture can become blurred. When taking a picture, hold the phone firmly to prevent it from moving, or use the delay timer.
Page 236: Environment
Safety Precautions and Conditions of Use • Before connecting the phone with a PC or a peripheral unit, read the operation manual for the other unit carefully. • If the phone’s battery has been removed for some time, or the phone has been reset, the unit’s clock and calendar may be reinitialised.
Page 237: Precautions Concerning Vehicle Use
Safety Precautions and Conditions of Use PRECAUTIONS CONCERNING VEHICLE USE • It is the user’s responsibility to check the local laws governing the use of a mobile phone in vehicles. Pay full attention to driving. Pull off to the side of the road, park the car, and switch off the engine before making or answering a call.
Page 238: Sar
Rate (SAR). The SAR limit for the general public is currently 2 watts per kilogram averaged over 10 grams of body tissue. Your Sharp mobile phone SAR value is 0.638 watts per kilogram. This has been tested to ensure that this limit is not exceeded even when the phone is operating at its highest certified power.
Page 239: Precautions For Use In Usa
Safety Precautions and Conditions of Use PRECAUTIONS FOR USE IN USA FCC Declaration of Conformity This mobile phone 902SH with PC/Data interface cable XN-1DC30 complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:...
Page 240 Safety Precautions and Conditions of Use However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient/Relocate the receiving antenna.
Page 241 Safety Precautions and Conditions of Use The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.
Page 242 Safety Precautions and Conditions of Use The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID APYHRO00038.
Page 243: Specifications And Optional Accessories
Specifications and Optional Accessories Specifications Weight: Approximately 149 g (with battery) Dimensions (W × H × D): Approximately 50 × 102 × 26 mm (without protruding parts) Battery: Lithium Ion, 3.7 V, 870 mAh Optional Accessories • Lithium Ion Battery (XN-1BT90) •...
Page 244: Index
Index Symbols Receiving a Schedule Entry 151 Resetting Call Timers 203 Sending a Schedule Entry 150 Camera (digital/video) 70 #/Flash Light Key 16 Viewing a Schedule Entry 151 Adjusting the Exposure 73, 82 * /Shift Key 14 Viewing the Memory Status 152 Auto Save 79 Call Costs 204 Changing the Picture Size 85...
Page 245 Index Subscribing 99 Setting in the Speeddial List 67 Recording 168 Centre Key 14, 29 Speeddial List 67 Viewing Totals 168 Characters 53 Viewing My Contact Details 62 External Camera 17 Changing the Input Languages 55 Countdown Timer External Connector 17 Changing the Input Mode 55 Editing the Countdown Time 168 Using Templates 57...
Page 246 Index Handset Lock 198 Remote Forward 95 Replying 94 Language Setting 187 Sending a Message in the Drafts Box 92 Left Soft Key 14 Incall Menu (Video Call) 47 Sending with Postcard 96 Changing the Image of Yourself 47 SMS Settings 102 Muting the Microphone 47 Main Display 15 Sorting the Messages 95...
Page 247 Index Viewing 118 Security 197 Power On and Off 26 Changing the PIN2 Code 198 Organiser 149 Profiles 171 Enabling/Disabling the PIN Code 197 Alarms 153 Activating 171 Handset Lock 198 Calculator 155 Any Key Answer 177 Phone Lock 199 Calendar 149 Assigning a Ring Video Clip File 174 Showing Secret Data 200...
Page 248 Index Turning On or Off the Speakers 195 Voice Recorder 157 Video Clip Recording 157 Tasks Downloading 128 Selecting Storage Memory 158 Creating 163 Operating 125 Sending 157 Deleting 166 Playing Back 124 Viewing Record Time 158 Editing 164 Sending a Video Clip File 125 Sending 165 Switching the Memory Source 124 Setting the Alarm 163...
Page 249: List Of Menu Functions
List of Menu Functions Menu No./ Menu No./ Menu No./ Menu No./ Main Menu Sub Menu1 Main Menu Sub Menu1 1 Games 1 Calendar 2 Screensavers 2 Alarms Games & More 3 Settings 3 Calculator 4 Java™ Information 4 Voice Recorder 5 Scanner Vodafone live! 7 Organiser...
Page 250 List of Menu Functions Menu No./ Menu No./ Main Menu Sub Menu1 1 All Calls 2 Missed Calls 3 Received Calls 11 Call Log 4 Dialled Numbers 5 Call Timers 6 Call Costs 1 Profiles 2 Display Settings 3 Sound Settings 4 Time &...

Sharp 902SH User Manual

Quick Links

Declaration of Conformity

Related Manuals for Sharp 902SH

Summary of Contents for Sharp 902SH

Table of Contents