Sharp Aquos LC-32LE700E Operation Manual

Aquos

Hide thumbs Also See for Aquos LC-32LE700E:

Service manual (164 pages)

Mode d'emploi (52 pages)

Gebruiksaanwijzing (52 pages)

Table Of Contents

Table of Contents

Quick Links

1 Remote Control Unit

Summary of Contents for Sharp Aquos LC-32LE700E

Page 1 LC-32LE700E LC-32LE700S LC-40LE700E LC-40LE700S LC-46LE700E LC-46LE700S LC-52LE700E LC-52LE700S LC-32LX700E LC-40LX700E LC-46LX700E LC-32LU700E LC-32LU700S LC-40LU700E LC-40LU700S LC-46LU700E LC-46LU700S LC-32LE705E LC-32LE705S LC-40LE705E LC-40LE705S LC-46LE705E LC-46LE705S LC-52LE705E LC-52LE705S LC-32LX705E LC-40LX705E LC-46LX705E LC-32LU705E LC-32LU705S LC-40LU705E LC-40LU705S LC-46LU705E LC-46LU705S LCD COLOUR TELEVISION LCD-FARBFERNSEHGERÄT OPERATION MANUAL TÉLÉVISEUR COULEUR À...
Page 2 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
Page 3: Table Of Contents
Dear SHARP customer AQUOS LINK ............. 19 Controlling HDMI devices using AQUOS LINK ..19 Thank you for your purchase of the SHARP LCD colour AQUOS LINK connection ........19 TV product. To ensure safety and many years of trouble- AQUOS LINK setup ..........
Page 4: Introduction
Introduction Important safety precautions • Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the cabinet of the TV.
Page 5: Remote Control Unit
Introduction Remote control unit B (Standby/On) > (Page 12) Exit the “MENU” screen. Buttons for useful operations R/G/Y/B (Colour) buttons The coloured buttons are m (Teletext) correspondingly used to select the ATV: Display analogue teletext coloured items on the screen (e.g., (Page 15).
Page 6: Tv (Front View)
Introduction TV (front view) Blue illumination LED B (Standby/On indicator) OPC indicator Remote control sensor OPC sensor a (Power button) @ (Menu button) b (Input source button) :r/s (Programme [channel] buttons) i+/- (Volume buttons) TV (rear view) COMMON INTERFACE slot USB terminal HDMI 4 (HDMI) terminal EXT 9 (VIDEO/AUDIO) terminals...
Page 7: Preparation
Preparation Supplied accessories Remote control unit ( x 1) AC cord ( x 1) Cable clamp ( x 1) Stand unit ( x 1) For 32 inch models For 40/46/52 inch models Product shape varies in some countries. Pages 3 and 6 Page 8 Page 8 Page 5...
Page 8: Inserting The Batteries
Preparation Inserting the batteries Before using the TV for the first time, insert two supplied “AAA” size zinc-carbon batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover.
Page 9: Quick Guide
Quick guide Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Run the Preparation initial Watch TV settings ...
Page 10: Before Turning On The Power
• This TV should be mounted on a wall only with the wall mount bracket and attachment* available from SHARP (Page 46). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
Page 11: Initial Auto Installation
Quick guide NOTE Initial auto installation • If you set “Sweden” in the country setting, you can select the cable provider “ComHem”. Refer to the H mark When the TV is powered on for the first time after in the following steps or instructions about the settings for purchase, the initial auto installation wizard appears.
Page 12 Quick guide Searching for cable broadcasts Menu Description Selectable items Specifies if you To change each item to the appropriate Scrambled need to add pay-TV Yes, No settings: stations services. Press a/b to select the menu, and then press ;. Channel: Extracts all of information from a Scrambled stations...
Page 13: Inserting The Ca Card Into The Ci Module
Quick guide Channel strength of DVB-T Checking signal strength and Supply voltage channel strength (DVB-T/C) Signal strength Channel strength If you install a DVB-T/C antenna for the first time or CH no. Signal strength relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the Current Max.
Page 14: Watching Tv
Watching TV Daily operation Selecting an external video source Switching on/off Once the connection is made, INPUT SOURCE press b to display the “INPUT SOURCE” screen, and then press Turning on/off the power EXT 1 b or a/b to switch over to EXT 2 the appropriate external source Turn on (;) the MAIN POWER switch on the...
Page 15: Epg
Watching TV EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO/ DATA, view detailed information about them, tune to an event currently on-air. Useful settings for using EPG Basic operation EPG display settings Press @ and the “MENU”...
Page 16: Selecting A Programme Using Epg
Watching TV Selecting a programme using EPG Basic operation The illustrations on this page are explained using three digit services. Display/Close the EPG screen Press EPG. Programme info. Search by genre Search by date Select Enter Back Exit Select a programme Select the desired programme Press a/b to select the desired programme.
Page 17: Teletext
Watching TV Buttons for teletext operations Teletext Buttons Description What is teletext? :r/s Increase or decrease the page number. Teletext broadcasts pages of information and entertainment to specially equipped TV. Your TV receives Select a group or block of pages displayed teletext signals broadcast by a TV network, and decodes in the coloured brackets at the bottom of Colour (R/G/...
Page 18: Connecting External Devices
Connecting external devices Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
Page 19: Scart Connection
Connecting external devices SCART connection Example of connectable devices Example of connectable devices Decoder DVD player/recorder If your VCR supports TV-VCR advanced AV Link systems, you can connect the VCR using a fully wired SCART cable. Decoder Decoder  SCART cable ...
Page 20: Audio Connections
Connecting external devices Audio connections Component connection Speaker/amplifier connection Example of connectable devices Connect an amplifier with external speakers as shown DVD player/recorder below. Connecting an amplifier with digital/ You will enjoy accurate colour reproduction and high quality images through the EXT 3 terminal when analogue audio inputs connecting a DVD player/recorder or other device.
Page 21: Aquos Link
AQUOS LINK Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC protocol, with AQUOS LINK you can interactively operate compatible system devices (AV amplifier, DVD player/recorder, Blu-ray player/ recorder) using a single remote control unit. NOTE •...
Page 22: Aquos Link Setup
AQUOS LINK Connecting an AQUOS BD player/AQUOS recorder via Connecting an AQUOS BD the AQUOS AUDIO speaker system player/AQUOS recorder only AQUOS BD player/AQUOS recorder AQUOS BD player/AQUOS AQUOS AUDIO speaker system recorder   HDMI-certified cable Optical audio cable AQUOS LINK setup Basic operation Selecting channel key...
Page 23: Operating An Aquos Link Device
AQUOS LINK Operating an AQUOS LINK device Setup menu AQUOS LINK allows you to operate the HDMI-connected You can call up the menu of an HDMI CEC-compatible device with a single remote control unit. external device (player, recorder, decoder, etc.) using the “Setup menu”...
Page 24: Menu Operation
Exit the MENU screen The operation will exit the “MENU” screen if you press > before it is completed. This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read LCFONT characters on LCD screens. NOTE •...
Page 25: Basic Adjustment
Basic adjustment Picture settings Picture Advanced Picture DYNAMIC This TV provides various advanced functions for optimising the picture quality. [Off] Backlight C.M.S.-hue Contrast C.M.S.-saturation Brightness C.M.S.-value Colour Colour temp. Tint 100 Hz Sharpness Film mode Advanced Active contrast Reset Gamma adjustment 3D-Y/C Picture Monochrome...
Page 26: Range Of Opc
Basic adjustment 100 Hz Range of OPC “100 Hz” technology provides superior solutions for The brightness level range of the OPC sensor’s automatic digital display picture quality removing motion blur. adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a NOTE maximum of e 16 and a minimum of f 16.
Page 27: Audio Settings
Basic adjustment Audio settings Emphasising dialogue Audio Option DYNAMIC Clear voice Treble Bass This function emphasises speech against background Balance noise for greater clarity. Surround [Off] Bass enhancer Outputting audio only Reset Option Audio Audio only Audio adjustment When listening to music from a music programme, you You can adjust the sound quality to your preference with can set the TV off and enjoy audio only.
Page 28: Power Save Settings
Basic adjustment EXAMPLE Power save settings Picture DYNAMIC ECO picture control [On] [Off] Energy save Standard] Backlight No signal off [Disable] Contrast No operation off [Disable] Sleep timer • When “OPC” is set to “On” or “On:Display”, an “Energy save” status icon appears to the left of “OPC”...
Page 29: Channel Settings
Basic adjustment Programme setup Channel settings Setup Auto installation Programme setup Setup You can reconfigure the DTV service settings Auto installation automatically or manually. Press a/b to select the broadcast standard The TV automatically detects and stores all available you want to reconfigure, and then press ;. services in your area.
Page 30: Manual Search
Basic adjustment Manual adjust Cable setting Configure various settings for each service using the colour (R/G/B) buttons. Additional search Service Service Lock CH skip Old LCN Use this menu to add new services automatically after name “Digital search” in the “Auto installation” menu has been completed.
Page 31: Manual Adjust
Basic adjustment Analogue setting Skip You can reconfigure the analogue TV channels settings Channels with “Skip” set to “On” are passed over when using :r/s even if selected while watching the image automatically or manually. from the TV. Additional search Use this menu to add new services automatically after Decoder “Analogue search”...
Page 32: Password/Parental Lock Settings
Basic adjustment Password/Parental lock settings Other basic adjustments Setup Option Child lock Key lock Allows you to use a PIN to protect certain settings from This function allows you to lock the buttons on the TV being accidentally changed. or remote control unit in order to prohibit children from changing the channel or volume.
Page 33: Useful Viewing Functions
Useful viewing functions Selecting the picture size Selecting the picture size manually Selecting the WSS picture size You can select the picture size. Selectable picture size automatically varies with the type of signal received. Item (for SD [Standard-Definition] signals) Setup Keeps the original aspect ratio in a full Normal screen display.
Page 34: Language Settings
Useful viewing functions Selecting the recording picture Language settings size manually Setup Digital setup Language REC picture size You can select an OSD language from the “Setup” menu. Select from among 23 languages. Refer to the You can use this menu to set the appropriate picture size OSD language column in the specification table for the for viewing a 16:9 format TV programme on a 4:3 TV.
Page 35: Display Settings
Useful viewing functions Display settings Time and title display Channel display Option Time display You can display the channel information by pressing p on the remote control unit. DTV mode ATV mode Time display This function allows you to display the clock time in the lower-right corner of the screen.
Page 36: Other Useful Features
Other useful features Setting when using external Skipping specified inputs devices Setup Input source settings Input skip Option This setting allows you to skip the SCART, HDMI or RGB input on the input source selection operation. Input select EXT 1 (SCART) EXT 2 (SCART) For setting the signal type of external equipment.
Page 37: Connecting A Usb Device
Other useful features Connecting a USB device Photo mode Connect an USB device to the TV as shown below. Viewing thumbnails • The TV automatically switches to the USB mode when a USB device is inserted in the USB terminal. •...
Page 38: Music Mode
Other useful features Music mode Slide show File name Time Selecting the BGM File name Time Playing: Playing: Buttons for music mode Slide show BGM: Buttons Description When selecting the folder icon with Buttons for slide show BGM select operation the 6 mark: Go back to the parent directory.
Page 39: Connecting A Pc
Connecting a PC Connecting a PC Displaying a PC image on the screen HDMI connection Selecting the picture size HDMI 1, 2, 3 or 4 You can select the picture size. Press f. • The “WIDE MODE” menu displays. Press f or a/b to select a desired item. ...
Page 40: Adjusting The Pc Image Automatically
Connecting a PC Adjusting the PC image Adjusting the PC image manually automatically Ordinarily you can easily adjust the picture as necessary to change image position using “Auto sync.”. In some This function enables the screen to be automatically cases, however, manual adjustment is needed to adjusted to its best possible condition when the analogue optimise the image.
Page 41: Rs-232C Port Specifications
Connecting a PC Command format RS-232C port specifications Eight ASCII codes +CR PC control of the TV C1 C2 C3 C4 P1 P2 P3 P4 • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input ...
Page 42 Connecting a PC RS-232C command list CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS POWER O W R POWER OFF (STANDBY) POSITION H-POSITION (AV/PC) SETTING V-POSITION (AV/PC) INPUT INPUT SWITCHING CLOCK (0_180) SELECTION A (TOGGLE) PHASE (0_40) TV (CHANNEL FIXED) WIDE MODE TOGGLE (AV)
Page 43: Appendix
Appendix Troubleshooting Problem Possible solution • No power. • Turn on (;) the MAIN POWER switch on the left side of the TV (Page 4). Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press •...
Page 44: Updating Your Tv Via Dvb-T
Information Message list Ensure that your TV software version is always up to date. From time to time SHARP will make updated TV base software and DVB software available. When new software is detected, you can confirm the update information and download the software from Digital setup “Message list”.
Page 45: Updating Your Tv Via Usb
The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
Page 46: Specifications
Appendix Specifications LCD COLOUR TV (32 o), LC- LCD COLOUR TV (40 o), LC- Item 32LE700E, LC-32LE700S, 40LE700E, LC-40LE700S, LC-32LX700E, LC-32LU700E, LC-40LX700E, LC-40LU700E, LC-32LU700S, LC-32LE705E, LC-40LU700S, LC-40LE705E, LC-32LE705S, LC-32LX705E, LC- LC-40LE705S, LC-40LX705E, LC- 32LU705E, LC-32LU705S 40LU705E, LC-40LU705S LCD panel Advanced Super View & BLACK TFT Advanced Super View &...
Page 47 • As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
Page 48: Environmental Specifications
Appendix Environmental specifications 32 inch 40 inch 46 inch 52 inch Item models models models models On-Mode (W) (HOME MODE) 60 W 72 W 89 W 98 W J Energy-Save-Mode (W) Advanced 54 W 70 W 81 W 92 W K Standby-Mode (W) 0.20 W 0.20 W...
Page 49 Appendix Rating table for child lock Broadcasted rating User-adjusted rating ✔ Universal viewing — — — — — — — — — — — — — — Parental approval ✔ ✔ ✔ ✔ ✔ — — — — — — —...
Page 50: End Of Life Disposal
Appendix End of life disposal...
Page 51 52 o /46 o ( 1238.0 ) / [ 1099.0 ] 52o/46o ( 1238,0 ) / [ 1099,0 ] ( 1157.0 ) / [ 1023.4 ] ( 1157,0 ) / [ 1023,4 ] 470.0 470,0 ( 125.5 ) ( 95.0 ) ( 125,5 ) ( 95,0 ) [ 125.7 ]...
Page 52: Sharp Corporation
SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORATION http://www.sharp-eu.com Printed in Poland Gedruckt in Polen Imprimé en Pologne Stampato in Polonia Gedrukt in Polen Impreso en Polonia Impresso na Polónia TINS-E281WJN1 09P10-PL-NG...

Sharp Aquos LC-32LE700E Operation Manual

Introduction

Preparation

Quick Guide

Watching TV

Connecting External Devices

Aquos Link

Menu Operation

Basic Adjustment

Useful Viewing Functions

Other Useful Features

Connecting a PC

Appendix

Quick Links

Related Manuals for Sharp Aquos LC-32LE700E

Summary of Contents for Sharp Aquos LC-32LE700E

This manual is also suitable for:

Table of Contents