GE JGP633 Installation Instructions Manual

I stallatio

I structio s

36" SealedGas Cooktop

JGP633,

JGP970,

PGP966,

ZGU36

j

Ouestions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

r_

In Canada, call 1.800.561.3344

or Visit our Website at: www.geappliances.ca

i

IN THE COMMONWEALTH

OF

MASSACH USETTS:

, This product

must be installed by a licensed

plumber

or gas fitter.

, When using ball-type gas shut-off

valves, they

shall be the T-handle type.

, A flexible gas connector,

when used, must not

exceed 3 feet.

BEFORE YOU BEGIN

Read these instructions

completely

and carefully.

.IMPORTANT

- Save these

instructions

for local inspector's

use.

, IMPORTANT - Observe aU governing

codes and ordinances.

, Note to Installer-

Be sure to leave these

instructions

with the Consumer.

Note to Consumer

- Keep these instructions

for

future reference.

, Product failure due to improper

installation

is not

covered under the Warranty.

WARNING

- Thisappliancemust be

properly grounded.

.

IMPORTANT

- Leak testing of the

applianceshall be conducted accordingto the

manufacturer's

instructions.

, Proper installation

is the responsibility

of the installer and product failure due to

improper

installation

is NOT covered under

warranty.

A WARNING

- Disconnect

all electrical

power at the main circuit breaker

or fuse box before installing.

FOR YOUR SAFETY:

A WARNING

- iftheinformation

in this manual is not followed exactly, a fire,

explosion or gas leak may result causing property

damage, personal injury or death.

Do not store or use gasoline or other flammable

vapors and liquids in the vicinity of this or any other

appliance!

WHAT

TO DO IFYOU SMELL

GAS:

Do not try to light any appliance.

Do not touch

any electrical

switch; do not use any phone in

your building.

Immediately

call your gas supplier from a

neighbor's

phone. Follow the gas supplier's

instructions.

, If you cannot reach your gas supplier, call the fire

department.

Installation

and service must be performed

by

a qualified

installer, service agency or the gas

supplier.

This cooktop

has been design certified

by CSA International.

You'll find safety precautions

in your Owner's Manual.

Read them carefully.

Installation

of this cooktop

must conform

with

local codes or, in the absence of local codes with

the National Fuel Gas Code, ANSI Z223.1/NFPA

54-Latest

edition.

Be sure your cooktop

is installed properly by a

qualified

installer or service technician.

To eliminate

reaching over surface burners,

cabinet storage above burner should be avoided.

Do not install the unit near an outside door or

where a draft may affect its use.

31-i0834

(ii-ii

GE)

i