Related Manuals for Avantco UBB2448
Summary of Contents for Avantco UBB2448
- Page 1 User Manual Back Bar Refrigerator User’s Manual UBB2448, UBB2448G, UBB2460, UBB2460G, UBB2472, UBB2472G Please read the manual thoroughly prior to equipment set-up, operation and maintenance. - 1 -...
-
Page 2: Installation
User Manual Installation Please read this manual thoroughly prior to equipment set-up, operation and maintenance. Important!!! Please Read Before Installation • If the unit has recently been transported on its side, please let the unit stand upright for a minimum of 24 hours before plugging it in. •... -
Page 3: Temperature Controls
User Manual Electrical • Please ensure that the required voltage is being supplied at all times. • The unit should be plugged into a grounded and properly-sized electrical outlet with appropriate over-current protection. NEVER USE AN ADAPTER PLUG! Please refer to the electrical requirements on the unit’s nameplate. -
Page 4: Defrost System
User Manual Defrost System Refrigerator coils are kept below the freezing point (32 degrees Fahrenheit). During compressor down-time, the evaporator fan continues to circulate air through the evaporator coil. This air circulation raises the coil temperature above the freezing point, melting any accumulated frost. Run-off water is drained into the evaporator pan and evaporated. -
Page 5: Troubleshooting
800 number located on the serial number plate. Be sure to have serial number available when contacting service technicians. This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on products sold or used outside of the United States.