Fujitsu fi-6110 Getting Started Manual

Image scanner
Hide thumbs Also See for fi-6110:

Quick Links

P3PC-3002-04EN
fi -
fi -
6110 Image Scanner
6110 Image Scanner

Getting Started

Getting Started
Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner").
This manual describes the preparation required for use of the scanner. Follow the preparation procedures
described in this manual.
Make sure to read the "Safety Precautions" document provided with the scanner before use.
Read the Operator's Guide (PDF) included in the Setup DVD-ROM for information about the scanner's
operation procedures, daily care, consumables replacement, and troubleshooting.
July 2013
Microsoft, Windows, Windows Server, Windows Vista, Excel, and SharePoint are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Word is a product of Microsoft Corporation in the United States.
ISIS is a registered trademark or trademark of EMC Corporation in the United States.
ABBYY™ FineReader™ Engine © ABBYY. OCR by ABBYY
ABBYY and FineReader are trademarks of ABBYY.
ScanSnap, ScanSnap Manager, and PaperStream are registered trademarks of PFU LIMITED in Japan.
Other company names and product names are the registered trademarks or trademarks of the respective
companies.
© PFU LIMITED 2010-2013
1
Table of Contents
loading

Summary of Contents for Fujitsu fi-6110

  • Page 1: Getting Started

    6110 Image Scanner Getting Started Getting Started Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner"). This manual describes the preparation required for use of the scanner. Follow the preparation procedures described in this manual.
  • Page 2: Checking The Components

    Make sure to handle the components with care. The box and packaging materials are required for storage and transportation of the scanner. Do not throw them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
  • Page 3: Installing The Software

    ScanSnap Manager for fi Series Pull the ADF release tab to open the ADF, and pull the tape to remove the protective An application that scans images with the driver settings that are used exclusively for ScanSnap card. Manager for fi Series. PaperStream IP (TWAIN) Protective ADF Release driver is required to use this application.
  • Page 4: System Requirements

    Hard disk 1.3 GB or more of free hard disk System Requirements space space is required (*3) System requirements are as follows. DVD drive Essential for installing the software ® Windows XP Home Edition Interface USB2.0 (High-Speed) (Service Pack 3 or later) *1: ScandAll PRO, ScandAll PRO ScanSnap ®...
  • Page 5: Installing The Bundled Software

    ■ Installation (Custom) Installing the Bundled Software Perform steps 1. to 2. in "Installation Install the bundled software from the Setup DVD- (Recommended)" (page 5). ROM in the following procedure. Note that there are two ways to install the bundled Click the [Installation (Custom)] button.
  • Page 6: Installing The Scanner

    Installing the Scanner Connecting the Cables The following describes how to install the scanner. The following describes how to connect the cables between the scanner and your computer. Place the scanner at its installation site. AC Adapter AC Cable (14.96) (5.12) Power Connector 493.5...
  • Page 7: Test-Scanning Documents

    Connect the AC cable with the AC adapter Test-Scanning Documents (hereinafter referred to as "the power cable"). Using ScandAll PRO, you can test-scan documents to check if they are scanned correctly. WARNING For details about scanning documents by using PaperStream Capture and the PaperStream IP Be sure to use the supplied power cable.
  • Page 8: Contact For Inquiries

    [Scan] button in the dialog box. Launch ScandAll PRO. Select the [Start] menu [All Programs] In the [Scan Settings] dialog box, click the [Fujitsu ScandAll PRO] [ScandAll PRO]. [Scan] button. The scanned document images are Select the [Tool] menu [Preferences].

Table of Contents