Bosch Conettix ITS-D6686-INTL Installation Manual

Ethernet network adapter

Quick Links

Conettix ITS-D6686-INTL
Installation Guide
Ethernet Network
EN
Adapter
Table of Contents
loading

Summary of Contents for Bosch Conettix ITS-D6686-INTL

  • Page 1 Conettix ITS-D6686-INTL Installation Guide Ethernet Network Adapter...
  • Page 2: Table Of Contents

    Conettix ITS-D6686-INTL | Installation Guide | Contents Contents Introduction ............3 Network Interface..........3 Serial Interface............. 3 LEDs ..............3 Installation ............4 Mounting the D6686 ..........4 Connecting the D6686 ......... 4 Configuring and Programming the D6686 5 Factory Default IP Address ........5 Identifying the MAC Hardware Address ....
  • Page 3: Introduction

    Conettix ITS-D6686-INTL | Installation Guide | 1.0 Introduction Serial Interface Trademarks Figure 2: D6686 Network Interface All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly. Copyright This document is the intellectual property of Bosch Security Systems, Inc.
  • Page 4: Installation

    Conettix ITS-D6686-INTL | Installation Guide | 2.0 Installation Figure 3: D6686 Connections 2.0 Installation Mounting the D6686 Mount the D6686 on a rail or other user-supplied spot behind the D6600 that it will be connected to. Refer to Figure 3.
  • Page 5: Configuring And Programming The D6686

    Conettix ITS-D6686-INTL | Installation Guide | 3.0 Configuring and Programming the D6686 For example, 190.200.128.111 could be an IPv4 3.0 Configuring and address and 2001:0db8:85a3:0042:0000:8a2e:0370:7334 Programming the D6686 could be an IPv6 address. Within an isolated network, you can assign IP addresses at random Factory Default IP Address if each one is unique.
  • Page 6 Conettix ITS-D6686-INTL | Installation Guide | 3.0 Configuring and Programming the D6686 3. Open the D6200 software and select 7. Click the Open XML button, select Network – Network Utilities - Network D6686.xml, and click Open. Device Setup as shown below 4.
  • Page 7 Conettix ITS-D6686-INTL | Installation Guide | 3.0 Configuring and Programming the D6686 Bosch Security Systems, Inc. | 11/12 | F01U274797-02...
  • Page 8: Programming Overview For The D6600

    Conettix ITS-D6686-INTL | Installation Guide | 3.0 Configuring and Programming the D6686 9. Click on the Save XML As button to save • The number and type of receiving lines in use the changes made and enter a name for •...
  • Page 9: Specifications

    Conettix ITS-D6686-INTL | Installation Guide | 4.0 Specifications 4.0 Specifications Table 2: Specifications Supported ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and FTP Protocols Connectors Serial: 2 - DB9M DTE serial ports Network: 1 - RJ45 10Base-T/100Base-TX Ethernet port...
  • Page 10 Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, NY 14450-9199 (800) 289-0096 © 2012 Bosch Security Systems, Inc. F01U274797-02...

Table of Contents