Trailer Sway Control (Tsc) - If Equipped - RAM TRUCK 1500 Owner's Manual

2013
Hide thumbs Also See for RAM TRUCK 1500:
Table of Contents
when ESC becomes inactive following the maneuver
that caused the ESC activation.
The "ESC OFF Indicator Light" indicates the
Electronic Stability Control (ESC) is off.
Trailer Sway Control (TSC) – If Equipped
The TSC system uses sensors in the vehicle to recognize
an excessively swaying trailer and will take the appro-
priate actions to attempt to stop the sway. The system
may reduce engine power and apply the brake of the
appropriate wheel(s) to counteract the sway of the trailer.
TSC will become active automatically once an excessively
swaying trailer is recognized. No driver action is re-
quired. Note that TSC cannot stop all trailers from
swaying. Always use caution when towing a trailer and
follow the trailer tongue weight recommendations. Refer
to "Trailer Towing" in "Starting and Operating" for
further information. When TSC is functioning, the "ESC
Off Indicator Light" will flash, the engine power may be
reduced and you may feel the brakes being applied to
individual wheels to attempt to stop the trailer from
swaying. TSC is disabled when the ESC system is in the
"Partial Off" or "Full Off" modes.
TSC is only active in the default "ESC On" mode. TSC
can be disabled by pressing the "ESC Off" switch and
entering "ESC Partial Off" mode. It is not active in the
"ESC Partial Off" or "ESC Off" modes. Refer to the ESC
portion of this section for an explanation of the different
ESC operating modes.
WARNING!
If TSC activates while driving, slow the vehicle
down, stop at the nearest safe location, and adjust the
trailer load to eliminate trailer sway.
STARTING AND OPERATING 481
5

Hide quick links:

Table of Contents
loading

Table of Contents