RAM TRUCK 1500 Owner's Manual page 464
2013
Hide thumbs
Also See for RAM TRUCK 1500:
- Owner's manual (630 pages) ,
- User manual (196 pages) ,
- Owner's manual supplement (40 pages)
Table of Contents
462 STARTING AND OPERATING
WARNING!
To prevent serious injury, NEVER put your fingers
inside the hook area as you are powering-in.
NOTE: How to spool under no load: Arrange the re-
mote control lead so it cannot be caught in the winch.
Arrange the wire rope so it will not kink or tangle when
spooled. Be sure any wire rope already on the spooling
drum is wound tightly and evenly layered. Tighten and
straighten the layer if necessary. Keep the wire rope
under light tension and spool the wire rope back and
onto the winch drum in even layers. Stop frequently to
tighten and straighten the layers as necessary. Repeat this
process until the winch hook is the same distance as the
full length of the remote control from the winch. Pinch
the hook between your thumb and forefinger and attach
the hook strap. Hold the hook strap between the thumb
and forefinger to keep tension on the wire rope. Walk the
wire rope towards the fairlead, carefully spooling in the
remaining wire rope. By pulsing the remote control
switch.
- Quick Links:
- Maintaining Your Vehicle
Hide quick links:
Chapters
Table of Contents
