MPORTANT NFORMATION NOTICE: This product meets the applicable Industry Canada technical specifications. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations. Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
ABLE OF ONTENTS ... 2 MPORTANT NFORMATION NTERFERENCE NFORMATION EARING OMPATIBILITY ... 5 NTRODUCTION ANDSET AND HARGE RADLE ... 7 AYOUT ... 8 EFORE EGIN ... 8 ARTS HECKLIST ELEPHONE EQUIREMENTS MPORTANT NSTALLATION NFORMATION MPORTANT NSTALLATION ... 9 NSTALLING THE HONE AC (E ONNECTING THE...
Page 4
ABLE OF ONTENTS PEAKERPHONE PERATION ECEIVING A ALL WITH ... 21 PEAKERPHONE AKING A ALL WITH ... 21 PEAKERPHONE WITCHING ETWEEN PEAKERPHONE AND ... 22 NTERCOM PERATION AKING AN NTERCOM NSWERING AN NTERCOM ECEIVING AN NCOMING ELEPHONE NTERCOM SING NTERCOM WITH A ELEPHONE NTERCOM HREE...
Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Congratulations on purchasing this GE telephone/answering system. This system operates in the 2.4GHz/900MHz frequency range, and is unique to conventional cordless telephones. When the base is connected to electrical power and a telephone line, it can support a cordless handset.
Page 6
IMPORTANT: In order to use all of the features of this telephone, you must subscribe to two separate services available from your local telephone company: the standard Name/Number Caller ID Service to know who is calling when the phone rings and Caller ID with Call Waiting Service to know who is calling while you are on the phone.
EFORE EGIN ARTS HECKLIST Make sure your package includes the items shown here. Base Base Handset Cordless handset Cordless charger handset ELEPHONE EQUIREMENTS To use this phone, you need an RJ11C type modular telephone jack, which might look like the one pictured here, installed in your home.
MPORTANT NSTALLATION • Install telephone near both a telephone (modular) jack and an electrical power outlet. • Avoid sources of noise, such as a window by a busy street, and electrical noise, such as motors, microwave ovens, and fluorescent lighting. •...
CAUTION: Use only the ATLINKS USA, Inc. 5-2596 (black) and 5-2625 (gray color adapter for white unit) power supply that came with this unit. Using other power supplies may damage the unit. 2. Plug the handset charge cradle into an electrical outlet. NOTE: The charge indicator on the handset charge cradle turns on to indicate the handset battery is charging Allow the handset to charge for 12 hours prior to first use.
4. Plug the telephone line cord into the jack marked PHONE LINE on the back of the base and the other end into a modular phone jack. 5. Feed the telephone line cord and power supply cord through the grooves on the pedestal to allow the unit to rest flat against the wall. 6.
1. Press the FLASH/PROGRAM button until SET CONTRAST shows in the display. “ 1 ” is the default setting. 2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use the MESSAGES/CID ( 3. Press FLASH/PROGRAM again to store your selection. NOTE: You can press FLASH/PROGRAM at any time to go to the next option.
2. Use the touch-tone pad to enter your new 3-digit security code. For example, press the 6, 2, and 8 number keys for security code 628. The default security code is 123 . NOTE: If you want to re-enter the security code, enter the numbers again and press the FLASH/PROGRAM button.
ULSE NOTE: This setting may only be made with the base. Most telephone systems use tone dialing, however, some may still use pulse dialing. Depending on your telephone system, set the dialing mode as follows: 1. Press the FLASH/PROGRAM button until SET TONE/PULSE shows on the display.
6. Press FLASH/PROGRAM again to store your selection. OCAL NOTE: This setting may be made with the base or the cordless handset. 1. Press the FLASH/PROGRAM button until SET AREA CODE - - - or AREA CODE - - - shows in the display. - - - is the default setting. 2.
2. Press 1 or 2 on the cordless handset or base touch-tone pad or use the MESSAGES/CID ( button on the handset to scroll to 1YES or 2NO . NOTE: If you choose “YES ” all settings in the programmable menu return to factory defaults except day and time.
ORDED ANDSET 1. Lift the handset and wait for a dial tone. Dial the desired number. -Or- 2. Dial the number, then lift the handset. 3. When finish, put the handset back on the cradle to hang up. PEAKERPHONE 1. Press the SPEAKER/CALLBACK button. 2.
The base ringer volume is set through the programming menu. Refer to Telephone Set Up for more information. LASH Use the FLASH/PROGRAM buttons on the base and cordless handset to activate custom calling services such as call waiting or call transfer, which are available through your local phone company.
If you get a busy signal, and want to keep dialing the number, press the redial button to quickly redial the number again. Press the HOLD button on the base to put a call on hold. The hold indicator light turns on. To take a call off hold, press the HOLD button again, and the hold indicator light turns off.
when you call your bank you may need to enter your account number. Using the temporary tone allows you to temporarily make your phone touch tone compatible. 1. Dial the telephone number and wait for the line to connect. 2. When your call is answered, press the *TONE button on your cordless handset or base number pad to temporarily change from pulse dialing to tone dialing.
PEAKERPHONE PERATION For best speakerphone performance, avoid the following: • Areas with high background noise. (The microphone might pick up these sounds.) • Surfaces affected by vibration. • Recessed areas such as in a corner, under a cupboard, or next to a cabinet, which can generate an echo effect.
WITCHING ETWEEN You can switch between speakerphone and handset after dialing a number, or any time during a conversation. Speaker to Handset — Press TALK/callback on handset, and then press SPEAKER/CALLBACK on the base or lift the corded handset. Speak into the handset.
Base - Speakerphone rings. To take the call, press the SPEAKER/CALLBACK button or lift the corded handset. SING NTERCOM WITH A During a telephone call, you can use the intercom/paging function to page the base or cordless handset and set up a private (2-way) intercom conversation with another user while the telephone call is placed on hold.
NOTE: A handset or the base may enter a conversation directly by pressing the TALK/callback button on the handset or the SPEAKER/CALLBACK button on the base while the other handset or the base is engaged with an external call. EMORY The cordless handset and base each have their own separate memory storage areas.
NOTE: If you make a mistake, press the DELETE button on the base or chan/ delete on the handset to backspace and erase the wrong character(s) or number(s). 6. Use the touch-tone pad to enter the area code followed by the telephone number (up to 24 digits, including pauses) and press the memory button again to save your selection.
To Change: Follow the steps under Storing a Name and Number in Memory except replace the stored name or number with the new information. To Delete: Press MEMORY/CONFERENCE (base) or mem/conference (cordless handset) button, then press the MESSAGES/CID ( (base) or the cid/vol ( desired memory.
-Or- 1. Make sure the phone is OFF (not in talk mode). 2. Press the MEMORY/CONFERENCE button. 3. Press the desired memory location button (0-9), or use the MESSAGES/ CID ( ) button to scroll to the desired telephone number. 4.
ID (CID) ALLER Caller ID (CID) is a service available from your local telephone company. For Caller ID to work on this system, you must subscribe to Caller ID service. To receive Caller ID information for a Call Waiting call, you must subscribe to the combined Call Waiting Caller ID service.
• Press the MESSAGES/CID up arrow ( arrow ( ) button (cordless handset) to review the oldest call records and scroll to newer records. When you reach the newest call, the display shows END OF LIST . • Press the MESSAGES/CID down arrow ( down arrow ( ) button (cordless handset) to review new call records and scroll to older call records.
ID N IALING A ALLER When reviewing any call record in the Caller ID memory, you can dial back the caller’s number. 1. Make sure the phone is OFF (not in talk mode). 2. Press MESSAGES/CID ( button (cordless handset) until the desired call record is displayed. Depending on (a) how the incoming caller’s phone number is formatted when received, and (b) whether or not you pre-programmed your local area code into memory, you may need to adjust the format of the...
NOTES: If you find it necessary to dial all local calls with the area codes included press and hold flash/program until SET AREA CODE appears, then enter 000. If the number is corrupted, such as a number in a name or an alphabetical character in a number, an error tone comes from the handset and the number won't dial.
AITING ALLER Provided you subscribe to Caller ID with Call Waiting service from your phone company, you may see who is calling when you hear the call waiting tone in the receiver. The CID information appears in the display after you hear the tone. Press FLASH/PROGRAM to put the current call on hold and answer the incoming call.
2. Press and hold the ANNOUNCE button on the base while you record the announcement. 3. Begin speaking after you hear the beep. 4. Release the button after you finish your announcement. If you choose not to record an outgoing announcement, the default announcement plays.
• Press the PLAY/STOP button to stop the message playback. • Press and release the MESSAGES/CID ( message; continue to press and release the MESSAGES/CID ( to go to previous messages. • Press and release the MESSAGES/CID ( next message. •...
2. Begin speaking after you hear the beep. 3. Release the MEMO button after you are finished. EMOTE CCESS This section explains two types of remote access: using the cordless handset to access the answering system and accessing the answering system from another phone.
When the answering system picks up: 1. Press the answerer/format button on the cordless handset to access the answering system. 2. Listen as the caller leaves a message. 3. Press the TALK/callback button to speak to the caller, or press the answer/format button to stop screening the call.
Skip message Turn off/on answering system Review voice menu options The base LCD shows REMOTE ACCESS ANSWERING CALL . TIP: You can bypass the outgoing announcement by pressing any numbered key on the touch-tone pad while the announcement is playing. Then, you can enter your security code to access the answering system.
ATTERY AFETY RECAUTIONS • Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. • Keep batteries out of the reach of children. • Remove batteries if storing over 30 days. CAUTION: To reduce the risk of fire or personal injury, use only the battery listed in the instruction book.
Page 39
ISPLAY ESSAGES The following indicators show the status of a message or of the unit. ERROR ENTER NAME DELETE ALL? DELETE CALL ID? DELETE? END OF LIST UNKNOWN CALL PAGE YOU LINK HANDSET?/ LINK BASE? PAGING BLOCKED NUMBER Caller information has been interrupted during transmission or the phone line is excessively noisy.
REPT NO DATA WAITING HANDSET REGISTRATION NO BATTERY ANDSET OUND Signal A long warbling tone (with ringer on) Three short beeps One short beep (every 7 seconds) ROUBLESHOOTING ELEPHONE OLUTIONS No dial tone • Check and repeat installation steps: Ensure the base power cord is connected to a working outlet . Ensure the telephone line cord is connected to the base and the wall jack .
Page 41
• Did the handset beep when you pressed the TALK/callback button? The battery may need to be charged. • Place handset in charge cradle for at least 20 seconds. Dial tone is OK, but can’t dial out • Make sure the TONE/PULSE setting on the base is set to the type of phone service you are subscribed to.
Page 42
Memory Dialing doesn't work • Did you program the memory location keys correctly? • Did you follow proper dialing sequence? Unit locks up and no communication between the base and cordless handset • Unplug the AC power supply from the wall outlet and the back of the base.
ENERAL RODUCT To keep your unit working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose to direct sunlight or moisture. •...
ELEPHONE ETWORK Should your equipment cause trouble on your line which may harm the telephone network, the telephone company, where practicable, may notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service immediately.
Page 45
NDEX Accessing the Answering System from Another Location 36 Accessory Order Form 44 Answering a Call 16 Answering an Intercom Call 22 Answering System 20 Answering System Indicator 35 Answering System Operation 32 Answering System Set Up 32 Auto Standby 17 Base Layout 7 Base Speakerphone 16, 18 Base Unit 18...
Page 46
Language 11 Last Number Redial 18 Leaving a Memo 34 Local Area Code 15 Making a Call 16 Making a Call with Speakerphone 21 Making an Intercom Call 22 Manual Channel Selection 17 Memory 24 Memory Full 34, 36 Message Playback from Base Unit 33 Messages Indicator 33 Mute 19 Paging the Cordless Handset 19...
Page 47
ERVICE ATLINKS Communications Canada, Inc., warrants to the purchaser or gift recipient that if any manufacturing defect becomes apparent in this product within 1 year from the original date of purchase, it will be replaced free of charge, including return transportation. This warranty does not include damage to the product resulting from accidents, misuse or leaking batteries.
Page 49
27958 Téléphone Mains Libres de 2,4 GHz et Répondeur à Combiné sans Cordon et Afficheur D’appel en Attente Guide de l'utilisateur Les bonnes choses de la vie.
Page 50
ENSEIGNEMENTS AVIS: Ce produit est conforme aux spécifications techniques applicables d’Industrie Canada. Avant d’installer cet appareil, l’utilisateur doit vérifier s’il est permis de le raccorder aux installations de la compagnie locale de télécommunications. L’installation doit de plus respecter les méthodes de raccordement approuvées. L’abonné doit savoir que le respect des conditions mentionnées ci-dessus n’empêche pas nécessairement la détérioration du service dans certaines situations.
Page 51
ABLE DES MATIÈRES ENSEIGNEMENTS MPORTANTS L’ ENSEIGNEMENTS INTERFÉRENCE OMPATIBILITÉ AVEC LES ROTHÈSES (CPA) ... 2 ... 5 NTRODUCTION RÉSENTATION DU OCLE DE ... 7 OMBINÉ ... 7 RÉSENTATION DE LA ... 8 VANT DE OMMENCER ... 8 ISTE DE IÈCES XIGENCES DE LA RISE ÉLÉPHONIQUE...
Page 52
ABLE DES MATIÈRES ONCTIONNEMENT DU ECEVOIR UN PPEL AU AIRE UN PPEL AU OMMUTATION ENTRE LE ... 21 ET LE OMBINÉ L ’ ONCTIONNEMENT DE INTERPHONE D’ AIRE UN PPEL INTERPHONE ÉPONDRE À UN PPEL ECEVOIR UN PPEL D’ ... 22 INTERPHONE L ’...
INSTRUCTIONS IMPORTANTES DE SÉCURITÉ qui accompagnent ce produit et conservez-les pour référence ultérieure. Nous vous félicitons d’avoir acheté ce téléphone/système de messagerie GE. Ce système, qui fonctionne dans l’échelle de fréquences de 2,4GHz/900MHz, est unique par rapport aux téléphones sans cordon conventionnels. La base peut supporter un combiné...
Page 54
IMPORTANT: Pour utiliser toutes les fonctions de ce téléphone, vous devez être abonné à deux services distincts offerts par la compagnie de téléphone : le service d’afficheur de nom/numéro standard pour savoir qui appelle quand le téléphone sonne, et le service d’afficheur d’appel en attente pour savoir qui appelle pendant que vous parlez au téléphone.
VANT DE OMMENCER ISTE DE IÈCES Assurez-vous que la boîte contient les articles suivants: Base Combiné de base Chargeur de Combiné combiné sans sans cordon cordon XIGENCES DE LA RISE Pour utiliser ce téléphone, vous devez disposer dans la maison d’une prise téléphonique modulaire de type RJ11C (CA11A), qui peut ressembler à...
MPORTANTES IGNES • Installez le téléphone près d’une prise téléphonique (modulaire) et d’une prise de courant. • Évitez les sources de bruit, comme une fenêtre donnant sur une rue achalandée, et le bruit électrique produit par les moteurs, les fours à micro-ondes et les lampes fluorescentes.
ATTENTION : Utilisez seulement l’alimentation 5-2596(noir) 5-2625 (adaptateur gris pour appareil blanc) de ATLINKS USA, Inc. qui accompagne l’appareil. L’utilisation d’autres alimentations peut endommager l’appareil. 2. Branchez le socle de chargement des combinés dans une prise de courant. REMARQUE : L’indicateur de chargement du socle de chargement du combiné...
4. Branchez le cordon téléphonique dans la prise marquée PHONE LINE à l’arrière de la base et l’autre extrémité dans une prise téléphonique murale modulaire. 5. Acheminez le cordon téléphonique et le cordon d’alimentation dans les rainures du pied de manière que l’appareil repose à plat contre le mur. 6.
1. Appuyez sur le bouton FLASH/PROGRAM jusqu’à ce que PROGR CONTRASTE soit affiché. “1” est le réglage par défaut. 2. Appuyez sur 1, 2 ou 3 du clavier de la base pour entrer votre choix, ou utilisez le bouton MESSAGES/CID ( 3.
REMARQUE : Pour entrer le code de sécurité de nouveau, entrez de nouveau les chiffres et appuyez sur le bouton FLASH/PROGRAM. Les nouveaux numéros remplacent les anciens. 3. Appuyez de nouveau sur FLASH/PROGRAM pour mémoriser votre choix. Vous entendez une tonalité de confirmation et le nouveau code de sécurité apparaît dans l’affichage.
1. Appuyez sur le bouton FLASH/PROGRAM jusqu’à ce que REGLER TONE/PUL soit affiché. Le réglage par défaut est TONE . 2. Utilisez le clavier numérique pour choisir 1TONE ou 2 PUL, ou appuyez sur le bouton MESSAGES/CID ( 3. Appuyez de nouveau sur FLASH/PROGRAM pour mémoriser votre choix. Vous entendrez une tonalité...
2. Utilisez le clavier du combiné sans cordon ou de la base pour entrer l’indicatif à trois chiffres. 3. Appuyez de nouveau sur FLASH/PROGRAM pour mémoriser votre choix. REMARQUE : Vous pouvez appuyer sur FLASH/PROGRAM en tout temps pour passer à l’option suivante. NREGISTREMENT L’enregistrement relie la base à...
ONCTIONNEMENT DE ÉPONDRE À UN PPEL Vérifiez l’afficheur pour savoir qui appelle. OMBINÉ SANS ORDON 1. Appuyez sur le bouton TALK/callback du combiné. 2. Quand vous avez terminé, appuyez sur TALK/callback pour raccrocher. OMBINÉ À ORDON 1. Décrochez le combiné. 2.
ARLEUR 1. Appuyez sur le bouton SPEAKER/CALLBACK. 2. Attendez le signal de manœuvre, puis composez le numéro désiré. Ou composez le numéro, puis appuyez sur le bouton SPEAKER/CALLBACK. 3. Quand vous avez terminé, appuyez sur SPEAKER/CALLBACK pour raccrocher. ÉLECTION DE Pendant que vous parlez, vous devrez peut-être à...
CONSEIL : N’utilisez pas le bouton TALK/callback (combine) ni le bouton SPEAKER/CALLBACK (base) pour activer un service d’appel personnalisé, comme l’appel en attente, sans quoi vous raccrocherez le téléphone. ECOMPOSITION DU Pour recomposer rapidement le dernier numéro composé : ARLEUR DE LA 1.
• Pour renvoyer un appel en garde de la base au combiné sans cordon, appuyez sur TALK/callback au combiné sans cordon. Si vous poursuivez l’appel sur un autre poste, le téléphone sans cordon libère la ligne pour le poste téléphonique et l’indicateur de garde s’éteint. ECHERCHE DU OMBINÉ...
OLUME ARLEUR Réglez le volume du haut-parleur de la base à l’aide des boutons SPKR/VOL + et -. Il existe huit niveaux de volume et chaque pression du bouton de volume règle le volume du haut-parleur d’un niveau. Le téléphone émet deux bips quand vous atteignez le volume maximum ou minimum.
Page 69
ECEVOIR UN PPEL AU 1. Quand le téléphone sonne, appuyez sur le bouton SPEAKER/CALLBACK de la base et parlez normalement, à au moins 8 ou 9 pouces de distance, dans le microphone intégré. 2. Réglez le volume du haut-parleur en appuyant sur les boutons SPKR/VOL + et - de la base.
Page 70
D’ AIRE UN PPEL INTERPHONE 1. Assurez-vous que le téléphone est désactivé (pas en mode TALK). 2. Appuyez sur le bouton PAGE/INTERCOM (base) ou le bouton intercom (combiné sans cordon). Une tonalité de recherche se fait entendre à la base et au combiné sans cordon.
2. Pour répondre à l’interphone, appuyez sur le bouton PAGE/INTERCOM (base) ou le bouton intercom (combiné sans cordon). Quand vous avez terminé, appuyez sur le bouton PAGE/INTERCOM ou le bouton intercom pour parler à l’appelant extérieur. PPELS PAR NTERPHONE À 1.
2. Appuyez sur le bouton d’emplacement-mémoire désiré (touches 0 à 9) ou utilisez sur le bouton MESSAGES/CID ( ) (combiné sans cordon) pour parcourir le d’emplacement-mémoire. Si l’emplacement-mémoire est occupé, le nom et le numéro mémorisés sont affichés. Si l’emplacement-mémoire est vide, VIDE apparaît dans l’afficheur. 3.
6. Appuyez REDIAL pour afficher le numéro de recomposition et le nom. 7. Appuyez de nouveau sur le bouton MEMORY/CONFERENCE pour confirmer. REMARQUE : Si le numéro de recomposition comporte plus de 24 chiffres, le numéro de téléphone ne peut être mémorisé. D’...
2. Appuyez sur le bouton d’emplacement désiré (0 à 9). Le numéro de téléphone mémorisé est composé automatiquement. -Ou- 1. Assurez-vous que le téléphone est désactivé (pas en mode TALK) . 2. Appuyez sur le bouton MEMORY/CONFERENCE. 3. Appuyez sur le bouton d’emplacement-mémoire désiré (0 à 9) ou utilisez le bouton cid/vol ( 4.
Combiné : Assurez-vous que le téléphone est activé . 1. Appuyez mem/conference, puis sur 7. 2. À la tonalité d’accès, appuyez de nouveau mem/conference, puis sur 8. 3. À la tonalité d’accès suivante, appuyez mem/conference, puis sur 9. Base: Appuyez sur le bouton SPEAKER/CALLBACK ou décrochez le combiné à cordon. 1.
ECEVOIR ET ÉMORISER Quand vous recevez un appel, l’information est transmise par la compagnie de téléphone à votre téléphone entre la première et la deuxième sonneries. L’information d’appelant est affichée pendant que le téléphone sonne, vous donnant ainsi la possibilité de consulter l’information et de décider de prendre ou non l’appel.
• L’heure et la date de réception de l’appel. • NEW apparaît pour tous les appels qui n’ont pas déjà été consultés. REMARQUE : Renseignez-vous auprès de la compagnie de téléphone concernant la disponibilité du service d’affichage du nom. RANSFERT DE OSSIERS Vous pouvez transférer un dossier d’appelant dans la mémoire du téléphone.
Dix chiffres indicatif à 3 chiffres + numéro de téléphone à 7 chiffres. Sept chiffres numéro de téléphone à 7 chiffres. REMARQUE : Si la compagnie de téléphone ne fournit pas les dix chiffres d’un numéro d’appelant, vous ne pourrez régler le format de ce numéro. Faites défiler jusqu’au numéro à...
1. Utilisez le bouton MESSAGES/CID ( ) (combiné sans cordon) pour afficher un dossier d’appelant. 2. Maintenez le bouton DELETE (base) ou chan/delete (combiné sans cordon) enfoncé. L’affichage indique EFFACER TOUT? pendant plusieurs secondes. 3. Appuyez de nouveau le bouton DELETE (base) ou chan/delete (combiné sans cordon) dans les dix secondes pour supprimer tous les dossiers.
NSTRUCTIONS OCALES Si vous avez besoin d’aide additionnelle, appuyez sur le bouton memo de la base et suivez les instructions vocales. ROGRAMMATION DU NREGISTREMENT DU Pour obtenir de meilleurs résultats lorsque vous enregistrez, placez-vous à environ neuf pouces du microphone et essayez le plus possible d’éliminer le bruit de fond. 1.
CONSEIL : Assurez-vous que le volume de la base est suffisamment élevé pour entendre vos appels. É COUTE DES ESSAGES À Pour écouter les messages, appuyez sur le bouton PLAY/STOP de la base. Pendant qu’un message joue, vous pouvez : •...
AISSER UNE Utilisez la fonction note pour laisser un message. 1. Maintenez le bouton MEMO enfoncé (base) jusqu’à ce que vous ayez terminé le message. 2. Commencez à parler après le bip. 3. Relâchez le bouton MEMO quand vous avez terminé. CCÈSS À...
Quand le répondeur répond : 1. Appuyez sur le bouton answerer/format du combiné sans fil pour accéder au répondeur. 2. Écoutez l’appelant laisser un message. 3. Appuyez sur le bouton TALK/callback pour parler à l’appelant, ou appuyez sur answerer/format pour cesser de filtrer l’appel. ÉMOIRE LEINE Si la mémoire du répondeur est pleine, le système répond après 10 sonneries, émet...
L’afficheur ACL de la base indique REPONDEUR ANSWERING CALL . CONSEIL : Vous pouvez contourner le message d’accueil en appuyant sur une touche numérotée du clavier pendant que le message joue. Vous pouvez alors entrer votre code de sécurité pour accéder au répondeur. HANGEMENT DU ODE DE Le code de sécurité...
RÉCAUTIONS À RENDRE • Ne pas brûler, démonter, mutiler ni percer la pile. Comme d'autres piles de ce type, des produits toxiques peuvent s'échapper et causer des blessures. • Garder les piles hors de la portée des enfants. • Retirez les piles si vous rangez l’appareil pour plus de 30 jours. ATTENTION : Utilisez seulement la pile indiquée dans le guide de l'utilisateur pour réduire les risques d'incendie ou de blessure.
ESSAGES FFICHES Les indicateurs suivants indiquent l’état d’un message ou de l’unité. ERROR (ERREUR) ENTER NAME (ENTRER NOM) DELETE ALL? (EFFACER TOUT?) DELETE CALL ID? (EFFACER DOSSIER?) DELETE? (EFFACER?) END OF LIST (FIN DE LISTE) NEW (NOUVEAU) UNKNOWN CALL (APPEL INCONNU) PAGE YOU (RECHERCHE VOUS) LINK HANDSET?/...
REPT (REPT) NO DATA (AUCUNE DONNEE) WAITING HANDSET REGISTRATION (ATT ENR COMB) NO BATTERY (PAS DE PILE) IGNAUX SONORES DU Signal Un long ronflement (sonnerie activée) Trois courts bips Un court bip (aux 7 secondes) UIDE DE EPANNAGE OLUTIONS ÉLÉPHONE Aucun signal de manœuvre •...
Page 88
• Le combiné a-t-il émis un bip quand vous avez appuyé sur le bouton TALK/ callback ? Il faut peut-être charger la pile. • Placez le combiné dans le socle de chargement pendant au moins 20 secondes. Signal de manœuvre, mais impossible de est communiquer •...
Page 89
L’appareil bloque et aucune communication entre la base et le combiné sans cordon • Débranchez l’alimentation c.a. de la prise murale et communication entre la à l’arrière de la base. Retirez la pile du combiné. Attendez 30 secondes et rebranchez l’alimentation dans la base et la prise murale. Rebranchez la pile et chargez-la pendant 12 heures.
OINS ET NTRETIEN Pour maintenir le bon fonctionnement et la belle apparence de votre appareil, suivez les lignes directrices ci-dessous : • Éviter de placer le téléphone près d’un appareil de chauffage ou d’un appareil produisant du bruit électrique (ex.: moteurs, lampes fluorescentes, etc.). •...
NFORMATION SUR LE ÉSEAU ÉLÉPHONIQUE Si cet appareil provoque des dérangements sur la ligne et, par conséquent, sur le réseau téléphonique, la compagnie de téléphone signalera, s’il y a lieu, qu’elle doit temporairement interrompre le service. Si elle est dans l’impossibilité de le faire et que les circonstances dictent une telle mesure, la compagnie de téléphone peut immédiatement interrompre le service pendant un certain temps.
Page 92
NDEX Accéder au Répondeur À Partir D’un Autre Téléphone 35 Accèss à Distance 34 Afficheur 27 Afficheur D’appel en Attente 31 Appels par Interphone à Deux 22 Appels par Interphone à Trois 23 Attente Automatique 17 Aucun affichage 41 Avant de Commencer 8 Branchement du Combiné...
Page 93
Laisser une Note 34 Langue 11 Liste de Pièces 8 Mémoire 23 Mémoire Pleine 33, 35 Mémorisation D’un Nom et D’un Numéro 23 Mémorisation D’un Numéro de Recomposition Messages Affiches 38 Minuterie D’appel 17 Mute 19 Niveau de Sonnerie 13 Précautions à...
ERVICE PRÈS ENTE ATLINKS Communications Canada, Inc., garantit à l’acheteur de cet appareil ou à la personne qui le recevrait en cadeau, que si cet appareil présente un défaut de fabrication pendant l'année suivant la date d’achat, il sera remplacé sans frais. Les frais de transport de retour sont payés.
Page 95
NFORMATION POUR DESCRIPTION Alimentation c.a. Pince-ceinture Casque d'écoute Pile de remplacement pour combiné Pour passer une commande, ayez votre carte Visa, MasterCard ou Discover à portée de la main et composez le numéro sans frais 1-800-338-0376. Des frais d’expédition et de manutention seront ajoutés au montant de la commande.