Cisco 4000 Preparing To Install
Hide thumbs
Also See for 4000:
- Manual (18 pages) ,
- Quick start manual (8 pages) ,
- End user manual (6 pages)
Table of Contents
Quick Links
See also:
Troubleshooting Manual, Manual
C H A P T E R
Preparing to Install
Cisco 4000 Series Routers
This chapter includes information you need before you install your Cisco 4000 series
router. It includes the following sections:
•
•
•
•
•
•
Safety Recommendations
The following guidelines will help to ensure your safety and protect the equipment.
•
•
Warning
cord on AC units; disconnect the power at the circuit breaker on DC units. (To see translated
versions of this warning, refer to the appendix "Translated Safety Warnings.")
•
2
Safety Recommendations
General Site Requirements
Installation Checklist
Site Log
Required Tools and Equipment
Inspecting the System
Keep the chassis area clear and dust-free during and after installation.
Turn the power supply off and unplug the power cord before opening the chassis.
Before working on a chassis or working near power supplies, unplug the power
Keep tools and chassis components away from walk areas.
Preparing to Install Cisco 4000 Series Routers 2-1
Table of Contents
Related Manuals for Cisco 4000
Summary of Contents for Cisco 4000
-
Page 1: Safety Recommendations
C H A P T E R Preparing to Install Cisco 4000 Series Routers This chapter includes information you need before you install your Cisco 4000 series router. It includes the following sections: • Safety Recommendations • General Site Requirements •... -
Page 2: Safety With Electricity
Before working on the system, turn off the power and unplug the power cord. • Disconnect all power before doing the following: — Installing or removing a chassis — Working near power supplies • Do not work alone if potentially hazardous conditions exist. 2-2 Cisco 4000 Series Installation Guide... - Page 3 Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. • Never touch uninsulated telephone wires or terminals unless the telephone line is disconnected at the network interface. • Use caution when installing or modifying telephone lines. Preparing to Install Cisco 4000 Series Routers 2-3...
-
Page 4: Preventing Electrostatic Discharge Damage
If you are currently experiencing shutdowns or unusually high errors with your existing equipment, these precautions will help you isolate the cause of failures and prevent future problems. 2-4 Cisco 4000 Series Installation Guide... -
Page 5: Site Configuration Precautions
The device is designed to work with TN power systems. (To see translated versions of this warning, refer to the appendix “Translated Safety Warnings.”) • Install proper grounding to avoid damage from lightning and power surges. Preparing to Install Cisco 4000 Series Routers 2-5... -
Page 6: Equipment Racks
For systems without a power switch, line voltages are present within the power supply when the power cord is connected. (To see translated versions of this warning, refer to the appendix “Translated Safety Warnings.”) 2-6 Cisco 4000 Series Installation Guide... -
Page 7: Installation Checklist
Initial electrical connections established ASCII terminal attached to console port, or modem attached to console port (for remote configuration) Signal distance limits verified Startup sequence steps completed Initial system operation verified Software image verified Preparing to Install Cisco 4000 Series Routers 2-7... -
Page 8: Required Tools And Equipment
• ESD cord and wrist strap • Screwdrivers, Number 1 and Number 2 Phillips • One serial port adapter cable for each serial port to connect the port with the remote device or network 2-8 Cisco 4000 Series Installation Guide... -
Page 9: Inspecting The System
• Router • 6-foot (1.8-meter) power cord • Bag of rubber feet for desktop mounting • Optional equipment (which might include network connection cables) Preparing to Install Cisco 4000 Series Routers 2-9... - Page 10 • Cisco Information Packet • Optional companion publications, or the Cisco Connection Documentation, Enterprise Series CD, as specified on your order Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when installing or configuring your system, contact a customer service representative.