1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Scanner
  5. M3097DE
  6. Operator's manual

Fujitsu M3097DE Operator's Manual

Image scanner
Hide thumbs Also See for M3097DE:
Table of Contents

Quick Links

C150-E100-01EN
M3097DE/DG Image Scanner
Operator's Guide
Table of Contents
loading

Related Manuals for Fujitsu M3097DE

Summary of Contents for Fujitsu M3097DE

  • Page 1 C150-E100-01EN M3097DE/DG Image Scanner Operator's Guide...
  • Page 2 M3097DE/DG Image Scanner Operator's Guide...
  • Page 3 Schalldruckpegel beträgt 70dB(A)oder weniger gemäß ISO 7779. The contents of this manual may be revised without prior notice. All Rights Reserved, Copyright © 1997 FUJITSU LIMITED. Printed in Japan. No part of this manual may be reproduced in any form without permission.
  • Page 4 Please send your comments on this manual or on Fujitsu products to the following addresses: FUJITSU COMPUTER PRODUCTS OF AMERICA,INC. 2904 Orchard Parkway,San Jose. California 95134-2022,U.S.A. TEL:1-408-432-6333 FAX:1-408-432-3908 Home page:http://www.fcpa.com/ FUJITSU AUSTRALIA LIMITED 475 Victoria Avenue Chatswood. N.S.W2067,AUSTRALIA TEL:61-2-410-4555 FAX:61-2-411-8603 FUJITSU CANADA,INC.

  • Page 5: Important Note To Users

    While all efforts have been made to ensure the accuracy of all information in this manual, FUJITSU assumes no liability to any party for any damage caused by errors or omissions or by statements of any kind in this manual, its updates or supplements, whether such errors are omissions or statements resulting from negligence, accidents, or any other cause.
  • Page 6 Reference Guide contains OPERATING INSTRUCTION, CLEANING, REPLACEMENT OF PARTS, ADJUSTMENT and TROUBLESHOOTING. The M3097DE/DG is very fast and highly functional image scanner devel- oped for volume filing, using charge-coupled device (CCD) image sensors. This scanner features duplex scanning and high quality image, processing...
  • Page 7 WARNING indicates that personal injury may result if you do not follow a procedure correctly. CAUTION CAUTION indicates that damage to the scanner may result if you do not follow a procedure correctly. The following symbols are used in this manual.

  • Page 9: Table Of Contents

    Cable Connection ... 2-5 Mounting the Stacker ... 2-7 SCSI-ID setting (M3097DG) ... 2-8 Turning the Power On ... 3-1 Reading Mode Setting (M3097DE) ... 3-2 Manual Feed Mode Setting ... 3-8 Document Size ... 4-1 Document Quality ... 4-2 Installation Specifications ...
  • Page 10 viii...
  • Page 11 COMPONENTS COMPONENTS INSTALLATION AND INSTALLATION AND CONNECTIONS CONNECTIONS OPERATING OPERATING INSTRUCTION INSTRUCTION DOCUMENT DOCUMENT SPECIFICATION SPECIFICATION SPECIFICATIONS SPECIFICATIONS SETUP MODE SETUP MODE GLOSSARY GLOSSARY OF TERMS OF TERMS INDEX INDEX...

  • Page 12: Chapter 1 Components

    CHAPTER COMPONENTS After unpacking the scanner,confirm that all the components have been received. This chapter describes the components of the scanner, part names, and operator panel arrangement and their function. Checking the Components Units and Assemblies Operator Panel...
  • Page 13 Confirm that all the components shown in the following figure have been received. If any component is missing, please contact your sales agent. Terminator (for M3097DG) Operator's Guide (this manual) and Cleaning and Maintenance Scanner Power cable for North America Power cable for Europe Pad ASY...

  • Page 14: Units And Assemblies

    Units and Assemblies This section shows the exterior view and assemblies of the scanner. This section also provides names of each part and describes their functions. Units qDocument cover rAutomatic document eDocument feeder(ADF) holding pad wDocument bed tStacker uOperator panel...
  • Page 15 Presses a document to the document bed. Stacks the read documents. Turns the power on or off. The indication panel indicates the status of the scanner. Holds the documents to be fed by the automatic document feeder. Opens or closes the automatic document feeder to remove documents jammed in the feeder.
  • Page 16 Assemblies Thumb screw Guide A ASY Bearing Stacker Pick roller 2 Pad ASY Bearing Pick roller 1...

  • Page 17: Operator Panel

    Operator Panel The operator panel is located at the upper right hand side of the scanner. The panel consists of an LCD (24 character x 2 line), LEDs and buttons. Arrangement Operator panel (STOP) Previous Next Exit READ (START) ENTER...
  • Page 18 This button is effective during reading operation and stops the reading. Indicates that the scanner is ON. READ Indicates that the scanner is reading or ready to read. CHECK • If it lights, it means that some alarm occurred. Pressing “Exit” button turns off “CHECK”...

  • Page 19: Counter Display

    Counter Display The scanner is provided with the counter display. Counter Function Paper counter Paper counter counts the scanned sheet from the start of reading to Paper Empty or an error detection. So this counter is automatically reset at the start of reading.
  • Page 20 (Only M3097DE) Scanner displays followig screen when waiting Start button pressed. When the Pick roller cleaning is necessary, the scanner displays as follows on the upper line. When the ADF glass cleaning is necessary, the scanner displays as follows on the LCD.
  • Page 21 Temporary error This message is displayed if there is no more paper on the ADF paper chute during a read operation in ADF mode. Fill the ADF paper chute with paper. To enable the read operation, press the stop button. This message is displayed if a ducument is jammed in the ADF.
  • Page 22 Alarm One of the following message is displayed if an error occurs in the scanner. If one of the following error message is displayed, turn the power off and then on again. If the same message is displayed, contact your service representative.

  • Page 23: Chapter 2 Installation And Connections

    CHAPTER INSTALLATION AND CONNECTIONS The chapter describes how to install and connect the scanner. Precautions Inspection Removing the Carrier Fixing Bracket Cable Connection Mounting the Stacker SCSI-ID Setting (M3097DG)

  • Page 24: Precautions

    Do not install the scanner in the following places and environments. • Place the scanner away from electrical noise sources, strong magnetic fields and air flow. If the scanner is used near an air conditioner, copying machine, or TV set, the scanner may operate incorrectly.

  • Page 25: Inspection

    Inspection This section describes how to check the labels. Label A (An example) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interferenca and (2) This device must accept any Interference received, including interference that may cause undesired operations: This Class A digital apparatus meets all taquiraents of the Canadian Interferance Causing Equipment Regulations.
  • Page 26 Label B (An example) IMAGE SCANNER M3097DE MODEL CAO **** - **** PART NO. ***** SER. NO. 1997- ** DATE FUJITSU LIMITED MODEL NAME Rev. Label 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9...

  • Page 27: Removing The Carrier Fixing Bracket

    Place the image scanner on the edge of the desk top so that the left side (where ADF is placed) of the scanner extends from the desk top. Do not set the image scanner upside down or on its side.

  • Page 28: Cable Connection

    Cable Connection This section describes how to connect the cables. Connect the cables as follows: Turning the power switch off Press “O” side of the power switch to turn the power off. Connecting the power cable Connect the power cable to the power inlet of the device and a power outlet. Power inlet Power switch for North America...

  • Page 29: Connecting The Interface Cable

    Connect the SCSI interface cables and secure them with hooks and connect the other ends to the host machine. When the scanner is at the terminal side, connect the terminator to the connector to which an interface cable is not connected.

  • Page 30: Mounting The Stacker

    Mounting the Stacker Mount the stacker using the following procedure. q Mount the stacker. Hook the pins on the stacker to the claws on the image scanner. Stacker Pin (inside) Claw...

  • Page 31: Scsi-Id Setting (M3097Dg)

    The default of SCSI-ID is 5. SCSI-ID is set by Setup mode of the operator panel. The procedure to set SCSI ID is; 1 Turn the power ON by pressing “I” side of the power switch. The scanner displays “Scanner Ready” on the lower line of LCD.

  • Page 32: Chapter 3 Operating Instruction

    This chapter describes how to turn the power on, and also de- scribes button specification and reading mode setting. Refer to Cleaning and Maintenance about information on loading document and maintenance. Turning the Power On Reading Mode Setting (M3097DE) Manual Feed Mode Setting...

  • Page 33: Turning The Power On

    Turning the Power On This section describes how to turn the power on. Press “I” side of the power switch. The power goes on and the green Power lamp at the operator panel lights. Power OFF Power switch Power ON...

  • Page 34: Reading Mode Setting (M3097De)

    Reading Mode Setting (M3097DE) This section describes the button specifications and setup details for each of the simplex (front-side), duplex (front-side) and duplex (back-side) reading modes. When reading mode is set by the command from the host computer, the following button operation is not required.
  • Page 35 7 Select Size by pressing press . The scanner displays Screen 5. 8 Select Resolution by pressing As the cursor moves to left 100/150 may appear. Then press . The scanner displays Screen 6. 9 Select Front Density by pressing .
  • Page 36 Scanner displays Screen 9. 12 Select Back Halftone (when “Duplex” was specified) by pressing parameters are same as 11. Press to admit. Then scanner displays Screen 13 Select Front Document Type by pressing . As the . Scanner ...
  • Page 37 If all parameter is acceptable, press to return to “Scanner Ready” screen. Portrait Paper size Front side (F) or Back side (B)

  • Page 38: Manual Feed Mode Setting

    Manual Feed Mode Setting In this mode, the scanner waits for some predetermined time without issuing “Paper Empty” after all documents are read. This predetermined time (time-out limit) is specified by Setup mode. Therefore you can set next documents on ADF chute without interrupting reading operation. The procedures for setting manual feed mode are as follows.

  • Page 39: Chapter 4 Adf Document Specification

    CHAPTER ADF DOCUMENT SPECIFICATION This chapter describes the document size and document guality of the ADF. Document Size Document Quality...

  • Page 40: Document Size

    Document Size The following figure shows document sizes that the scanner can read. Maximum Scanner M3097DE/DG 432 (17 in) 297 (11.7 in) Minimum 148 (5.8 in) 105 (4.1 in) 105 (4.1 in) 148 (5.8 in) (Unit : mm)

  • Page 41: Document Quality

    Document Quality This section describes document types and weights available for the scanner, and precautions. Document type The recommended paper type for document is as follows: • Woodfree paper • Plain paper (for example, the paper specified for XEROX 4024) When using all other type paper, check that it is successfully fed by ADF before performing a reading operation.
  • Page 42 CAUTION Do not feed an important original document to prevent damage to it on the off chance. When scanning a translucent document, set the density to light mode. Carbon-less papers have the chemical composition which damages the pad and pick roller. Therefore, note the following remarks Cleaning: If the miss pick occurs frequently, clean the pad and pick roller in accordance with...

  • Page 44: Chapter 5 Specifications

    CHAPTER SPECIFICATIONS This chapter describes the installation specifications, dimen- sions, consumables, option. Installation Specifications Dimensions Consumables Option...

  • Page 45: Installation Specifications

    Installation Specifications The following table lists the installation specifications of the scanner. Item Dimensions (mm) Weight (kg) Voltage Input power Phases Frequency Power consumption Device status Ambient Temperature condition Humidity Heat capacity Specification Width Depth 696 (27.4 in) 497 (19.6 in) 20 (44.2 lb.)

  • Page 46: Dimensions

    Dimensions (unit: mm)

  • Page 47: Consumables

    Consumables The following table lists consumables used for the scanner. Be sure to keep some consumables in stock. Customer is responsible to change these items periodically. The abrasion counter can be used to check the number of scanned documents. Name...

  • Page 48: Option

    The following table lists options of the scanner. Name Extended Memory IPC-2D* IPC-3D* * One of these option can be installed at a time Contact your Fujitsu sales agent for more information. Specification Remark 16MB, EDO SIMM, 72pin, 60ns without parity One per unit...

  • Page 49: Chapter 6 Setup Mode

    CHAPTER SETUP MODE This chapter describes the setup mode of the scanner. Activating the Setup Mode Contents of the Setup Mode...

  • Page 50: Activating The Setup Mode

    1 Turn the power ON. Then the scanner displays “Scanner Ready” on LCD. 2 If the scanner is M3097DG, go to the procedure 3. Press then the scan- ner (M3097DE) displays Screen M2. 3 Press then the scanner displays Screen M3. 4 Press then the scanner displays Screen M4.

  • Page 51: Contents Of The Setup Mode

    This section describes the contents of the setup mode. Item Double feed check IPC pre-setting Rest of abrasion counter Pick start time setting Time-out limit setting The time that the scanner waits for next ADF front offset setting* ADF back offset setting* FB offset setting* IPC/Memory status display SCSI ID setting * This offset means the deference from the value adjusted by automatic offset adjustment.

  • Page 52: Setting Double Feed Detection

    Double Feed detection is effective only when the length of the all document on ADF is same. NOTE Scanner stops document feeding at the double feed detection. When the document in ADF is not the double fed document, previous document may be double fed.
  • Page 53 Screen 42. 2 At Screen 42, press the document number and press activate the IPC pre-setting. Then the scanner displays Screen 42-1. Go to procedure 3. If you want to disable the IPC pre-setting, select “No” then press . Finally press “Scanner Ready”...
  • Page 54 NOTE • When IPC pre-set is executed in setup mode Scanner checks that IPC-2D or IPC-3D are installed when the scanner enters in IPC pre-set. If IPC-2D or IPC-3D is not installed, the scanner does not enter in IPC pre-set.

  • Page 55: Reset Of Abrasion Counter

    2 At Screen 44, press to increase the Pick start time or press the Pick start time. Then press activate the setting. Finally press return to “Scanner Ready” screen. button and . If you do ...
  • Page 56 Then press activate the setting. Finally press return to “Scanner Ready” screen. Setting Offset 1 Press and let the scan- ner display as follows; • Front Offset by ADF : Screen 46.
  • Page 57 Then press to activate the setting. The scanner displays the next item of the setup mode. ...
  • Page 58 Reviewing the IPC/Memory Status 1 Press and let the scanner display Screen 49. 2 Screen 49 displays the IPC option installed and total image memory in- stalled. Press to return to “Scanner Ready” screen. Setting SCSI-ID (M3097DG) 1 Press ant let the scan- ner display Screen 4A.
  • Page 59 6-10...

  • Page 60: Glossary Of Teams

    Automatic separation The image processing method to detect the difference between text and photos and choose the threshold accordingly. Automatic separation allows the scanner to switch between line mode and half tone mode in one pass. Automatic start mode (<-> manual start mode) In this mode the reading operation is activated only by START command.

  • Page 61: Double Feed Detection

    Double feed detection A function which detects the status when multiple sheets are fed in the ADF unit. Dots per inch. Drop-out color A color which is used to the document but does not appear in the read image. Duplex reading mode Both sides of the document are read in this mode.

  • Page 62: Image Emphasis

    IPC pre-set mode While reading binary images, it is necessary to set the scanner according to the quality of the sheet to be read. In this mode these settings can be performed in advance by corresponding each setting to a pattern number.

  • Page 63: Mirror Image

    Isolated noise from an image appearing as black spots in white areas and voids in black areas is removed to improve image quality. Operator panel A panel containing the scanner indicators and buttons. The operator panel is used to control scanner operations such as loading document, selecting features, and changing setup options. Outline extraction The boundary between black and white areas is traced and the outline extracted for closed areas.

  • Page 64: Read Operation

    A standard computer interface. Information is transferred between devices over a single wire (although other wires are used for control). With a serial interface, an interface cable greater than 3 meters (10 feet) can be used. This is often necessary in networking environments, where the scanner may be shared. GL-5...

  • Page 65: Temporary Error

    Time-out limit This is the time which the scanner waits for next document insertion after the last document feeding. The scanner returns Paper Empty when no document is set after time-out limit.

  • Page 66: Index

    INDEX Abrasion counter Activating the Setup Mode 1-2, 1-3 Lever 1-2, 1-3 mode paper chute Alarm 1-10 Ambient condition Arrangement Assemblies Belt Button /LED Function Cable Connection Carrier fixing bracket Checking the Components Connecting the interface cable the power cable Consumables Contents of the Setup Mode Conventions...
  • Page 67 2-5, 3-1 Precautions 2-1, 4-2 Previous button Reading mode face Reset of abrasion counter Resolution Reviewing the IPC/Memory Status Scanner Setting double feed detection IPC pre-set mode Offset picking start time SCSI-ID time-out limit Setup mode 6-1, 6-2 Simplex...
  • Page 68 the Power On the power switch off Units Units and Assemblies Weight button button (START) button (STOP) button IN-3...
  • Page 69 IN-4...

This manual is also suitable for:

M3097dg

Table of Contents