4Gbit/S Fc I/O Module Setting - Fujitsu PRIMERGY 4Gbit/s FC I/O Modules Owner's Manual

5.1

There are two methods for this product setting. The results will bring no difference.

"5.1.1 Using LightPulse Utility / NT"(pg.63)

"5.1.2 Using HBAnyware Utility"(pg.68)

5.1.1

Using LightPulse Utility / NT

This product name displayed in LightPulse Utility/NT is "Adapter * -BX600FC42E -* Port *".

To identify the 4Gbit/s FC I/O Module from LightPulse Utility/NT in an environment where multiple

4Gbit/s FC I/O Module are installed, refer to "Appendix A How to Identify the Adapter" ( pg.74).

1

Click the "Start" button

"Emulex"

When adding this product after installation, the settings for the existing product

may be changed. Therefore, after adding this product or driver, check the detailed

settings and correct them if necessary.

2

Select "Driver Parameters" in the "Category" field.

3

Select "Parameters".

The following parameter data are displayed.

For PG-FCD201, Adapter 0 and 1are displayed.

→

"Programs" or "All Programs"

→

"lpUtilNT" in this order.

→

5 4Gbit/s FC I/O Module Details Setting

E

63