Table of Contents
Quick Links
Table of Contents
Related Manuals for AEG 353 WK-M
Summary of Contents for AEG 353 WK-M
- Page 1 INSTRUCTION BOOK Wok burner 353 WK-m 949600808...
-
Page 2: Your New Appliance
Your New Appliance Thank you for purchasing an AEG appliance. To enable you to use your new hob efficiently and safely, please read this instruction book carefully before installing or using the appliance, and retain for future reference. Should the hob be transferred to a new owner please... - Page 3 How to read the operating instructions: 1... 2...Step by step Hint and tips Safety information Environmental information...
- Page 4 OFF position when not in use. Dispose of any packaging material and Do not use the wok if it is damaged in old appliances at an authorised any way, contact your local AEG disposal site. Service Centre. Never use plastic or aluminium dishes on the wok.
- Page 6 The operating knob has a ring showing the scale of markings. Off. Max. flame and ignition position Min. flame...
- Page 7 Burner cover/inner burner ring/outer burner ring Burner ring Cover Together with the inner burner ring the outer burner ring forms a space where the final mixture of gas and air takes place in order for the gas burn correctly. Please note: It is very important that the inner burner ring/outer burner ring is placed correctly, together with the cover.
- Page 9 Please note: If the wok is mounted in a table top with a cupboard underneath, the flame might be blown out if the door is slammed. The wok-unit has a special pan support which enables use of a wok pot with curved bottom.
- Page 10 1. Depress and turn the control knob for the burner, the left to Max. flame 2. The ignition electrode will emit sparks, and when the mixture of gas and air is correct, the burner will be ignited. Is not possible to connect the unit to mains, a match may be used to ignite the burner 3.
- Page 11 For reasons of hygiene and safety, the cooking burner must be kept clean. Grease stains and spilled food generate smoke when heated, and can even cause fire. The splashguard can be removed to make it easier to clean the surface. What to do: 1.
-
Page 12: Stainless Steel Surfaces
Stainless steel surfaces Perform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in the direction of the steel finish. To ensure that the steel retains its shine, it is recommended that you use a polishing agent for stainless steel on a regular basis. - Page 13 240 V 1N + PE...
- Page 14 This hob must be installed in This hob must be installed by accordance with the Gas Safety qualified personnel to the (Installation and Use) Regulations relevant British Standards. (Current Edition) and the IEE Wiring Regulations (Current Any gas installation must be Edition).
-
Page 15: Gas Connection
Gas installation In accordance with local requirements for domestic gas cooking appliances. Gas installation must only be carried out by an authorised person. For gas types see technical data. Gas connection The gas intake is situated at the lower rear of the appliance. The intake has a ½"... - Page 16 Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installation The hob unit can be mounted in any type of kitchen with a table surface whose thickness is between 28 mm and 40 mm.
- Page 17 It is not necessary to attach the reinforcement beam to the work top surface, as it is held in place by a specially designed moulding, which is incorporated in the hob units flanges. The units externally measured length 145 mm: Cooker hood 290 mm: Two-zone ceramic-top electric hob...
- Page 18 Installation of wok burner It is extremely important that both the inner and outer burner rings are fitted correctly into their “guide notch”, otherwise the burner will burn with an incorrect flame pattern and could be ruined within a very short Air valve period.
- Page 19 Cover plate 3. Place the cover plate over. See Fig. 3 fig. 3. Fig. 4 Outer burner ring 4. Finally, fit the outer burner ring, taking care that the guide pin engages in the notch. See fig. 4.
- Page 21 If the hob is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre. IMPORTANT: If you call out an engineer to a fault caused by incorrect use or installation, a charge will be made even if the hob is under guarantee.
- Page 22 This information can be found on the rating plate. Customer Care For general enquiries concerning your AEG appliance, or for further information on AEG products, you are invited to contact our Customer Care Department by letter or telephone: Customer Care Department...
- Page 23 6. The purchaser's statutory rights are AEG offer the following guarantee to not affected by this guarantee. the first purchaser of this appliance: 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first...
- Page 24 Before you move please contact your nearest Customer Care centre, listed below, to give them details of your new home. They will then ensure that the local service organisation is aware of your move and able to look after you and your appliances.