Related Manuals for Fujitsu MVGA-NVG11A
Summary of Contents for Fujitsu MVGA-NVG11A
- Page 1 User ’ s Manual MVGA-NVG11A MVGA-NVG11P MVGA-NVG11AL MVGA-NVG11AT MVGA-NVG11PT MVGA-NVG11AM MVGA-NVG11AD DOC NO: 54-0NV11-05 Rev.D 01/02/21...
- Page 2 FCC Requirement This device has been certified to comply with the limits for a Class B computing device pursuant to Subpart J of Part 15 of the FCC Rules. See instructions if interference to radio reception is suspected. WARNING: This equipment generates and uses radio frequency energy and, if not installed or used properly, that is, in strict accordance with the manufacturer's instructions, may cause interference to radio or television reception.
- Page 3 Notice The information in this document is subject to change in order to improve reliability, design, or function without prior notice and does not represent a commitment on the part of this company. In no event will we be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or the inability to use the product or documentation, even if advised of the possibility of such damages.
-
Page 4: Table Of Contents
TABLE OF CONTENTS 1. Introduction .................... 1 1.1 Features ......................1 1.2 System Requirements..................2 1.3 Package Contents ..................... 2 2. Har dware Installation ................4 2.1 Adapter Configuration..................4 2.2 Installing your VGA adapter ................10 3. Software Installation ................11 3.1 Installing driver on Windows 98SE/ME ............ -
Page 5: Introduction
1. Introduction The MVGA-NVG11A/P/AL/AT/PT/AM/AD is the 3D graphics processors and multimedia controller. Its innovative architectures combine, transform, and light technology with a rendering engine that delivers 4 pixels per clock. The nVIDIA GeForce2 MX not only speed up graphics processing for richer 3D graphics, it also frees up CPU bandwidth, to the computer systems use, by incorporating GeForce2 MX break-through 3D architecture. -
Page 6: System Requirements
□ Microsoft Windows 98SE / ME / Windows 2000. □ DirectX 7 and OpenGL Features. 1.3 Package Contents MVGA-NVG11A □ MVGA-NVG11A adapter. □ Auto-Run Driver CD-Title. □ User’ s Manual. □ IVI’ s WinDVD CD-Title. (Optional) □ S-Video Cable 1.8m. (Optional for TV-OUT) □... - Page 7 MVGA-NVG11AT □ MVGA-NVG11AT adapter. □ Auto-Run Driver CD-Title. □ User’ s Manual. □ IVI’ s WinDVD CD-Title. (Optional) □ DVI to D-sub connect. (Optional For LCD) MVGA-NVG11PT □ MVGA-NVG11PT adapter. □ Auto-Run Driver CD-Title. □ User’ s Manual. □ IVI’ s WinDVD CD-Title. (Optional) □...
-
Page 8: Hardware Installation
2. Hardware Installation 2.1 Adapter Configuration MVGA-NVG11A 32MB SDRAM on board TV-OUT encoder chip TV-OUT Output S-Video Output BIOS To monitor GeForce2 MX MVGA-NVG11A (w/ TV-OUT) 32MB SDRAM on board BIOS To monitor GeForce2 MX MVGA-NVG11A (w/o TV-OUT) - Page 9 MVGA-NVG11P 32MB SDRAM on board TV-OUT encoder chip TV-OUT Output S-Video Output BIOS GeForce2 MX To monitor PCI Interface MVGA-NVG11P (w/ TV-OUT) 32MB SDRAM on board BIOS GeForce2 MX To monitor PCI Interface MVGA-NVG11P (w/o TV-OUT)
- Page 10 MVGA-NVG11AL 64MB SDRAM on board S-Video Output To monitor TV-OUT encoder chip BIOS GeForce2 MX MVGA-NVG11AL (w/ TV-OUT) 64MB SDRAM on board BIOS To monitor GeForce2 MX MVGA-NVG11AL (w/o TV-OUT)
- Page 11 MVGA-NVG11AT 32MB SDRAM on board Secondary RCA BIOS Primary RCA GeForce2 MX MVGA-NVG11AT 32MB SDRAM on board To LCD monitor BIOS To RCA monitor GeForce2 MX MVGA-NVG11AT (DVI)
- Page 12 MVGA-NVG11PT 32MB SDRAM on board Secondary RCA BIOS Primary RCA GeForce2 MX MVGA-NVG11PT 32MB SDRAM on board To LCD monitor BIOS To RCA monitor GeForce2 MX MVGA-NVG11PT(DVI)
- Page 13 MVGA-NVG11AM 32MB SDRAM on board To monitor nVIDIA GeForce2 MX MVGA-NVG11AM MVGA-NVG11AD 32MB SDRAM on board To monitor nVIDIA GeForce2 MX MVGA-NVG11AD...
-
Page 14: Installing Your Vga Adapter
Note: Before installing your new VGA card, you must first set the VGA option to either Standard VGA or Standard Display VGA. 2. Remove your old graphics card, and install your new VGA card into the AGP slot. MVGA-NVG11A MVGA-NVG11P MVGA-NAG11AL MVGA-NVG11PT... -
Page 15: Software Installation
3. Software Installation After installing the VGA card in your computer, please turn on your PC, and your computer will be automatically detected. 3.1 Installing driver on Windows 98SE/ME Please set the VGA card as ‘Standar d PCI Gr aphics Adapter (VGA)’. When asked if you want to restart your PC, click ‘... -
Page 16: View User's Manual
3.3 View User's manual Click ‘User ’s Manual’ to view detailed information regarding the various Drivers/Programs and FAQ located on the CD. 3.4 Installing driver on Windows 2000 Please set the VGA card as ‘Video Contr oller (VGA Compatible)’. When asked if you want to restart your PC, click ‘No’. -
Page 17: Tv-Out Function Instructions
3.5.1 How to enable the TV-OUT function The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV input. Connect the signal cable between TV-OUT at VGA card and TV's Video input, and turn on the TV before launch ‘ Display War ning: Properties’... - Page 18 3.5.2 How to change TV setting? 1. You can click ‘TV’ to switch VGA output to A. Click ‘Change TV For mat’ to select which standard TV you want. When you select ‘Make this for mat the power -up default’; the system will change BIOS default to the format when you boot-up it next time.
- Page 19 3.5.3 How to adjustment screen position? 1. Click on ‘Display’ icon at Control Panel. Select ‘Settings’ tab and click ‘Advanced Pr oper ties’. You will see the window. A. When the output of your VGA is set to Monitor, You can click ‘Device Setting’ to adjust the screen position WARNING: The Monitor display may become...
-
Page 20: How To Change Output To Digital Flat Panel
3.6 How to change output to Digital Flat Panel? 1. A. You can select ‘ ’ Digital Flat Panel switch VGA output to Digital Flat Panel. B. Click ‘ ’ ‘ ’ Apply to switch your display device. 2. Click ‘OK’ to make sure. 3. -
Page 21: Twinview Function Instructions
3.7 TwinView Function instructions 3.7.1 Extended Mode 1. A. You can select ‘Extended Desktop’ to add second device output of Extended desktop. B. Click ‘OK’ or ‘Apply’ to switch your display mode. 2. When asked if you want to restart your PC, click ‘Yes’... -
Page 22: Clone Mode
3.7.2 Clone mode 1. A. You can select ‘Clone’ to add second device Output of clone. B. Click ‘OK’ or ‘Apply’ to switch your display mode. 2. When asked if you want to restart your PC, click ‘Yes’ to finish the settings and reboot your Windows. -
Page 23: Display Information
4. Display Information 4.1 Resolutions Supported Resolutions Color Depth Refresh Rate (Hz) 8bit 60 70 72 75 85 100 120 140 144 150 170 200 240 640 x 480 16bit 60 70 72 75 85 100 120 140 144 150 170 200 240 32bit 60 70 72 75 85 100 120 140 144 150 170 200 240 8bit... -
Page 24: Faq
A: Please check your monitor’ s specifications. Some monitors connect the DDC signal to ground: Which causes the BIOS not to detect your monitor. Therefore, causing your MVGA-NVG11A/P /AL/AT/PT not to receive any data or refresh rates. Q: The image on my monitor keeps on flickering and the driver can't change the refresh-rate. - Page 25 Q: TV-OUT is grayed out on my TV-OUT capable MVGA-NVG11A/P /AL/AT/PT. How can I fix it? A: 1. The MVGA-NVG11A/P/AL/AT/PT needs to see real 75 ohms AV input. However, not all TVs have this, and some have a switch labeled ‘Ter minate’...
- Page 26 Q: When I install the 5.xx series of drives Windows 9x locks up at the bootup screen. How can I fix it? A: Make sure your MVGA-NVG11A/P/AL/AT/PT is not sharing an IRQ with any other devices. If you find that it is, try either moving the device into another PCI slot, or reassigning the PCI IRQs in the BIOS.
- Page 27 Q: I can't get my system to work with AGP4X. It only can work in AGP2X. A: 1. You must enable AGP in 4X mode in BIOS of motherboard. 2. You need to confirm motherboard have support AGP 4X mode. 3.