Table of Contents
OPERATING MANUAL
BEDIENUNGSANLEITUNG
MODE D'EMPLOI
MANUAL DE FUNCIONAMIENTO
MANUALE DI ISTRUZIONI
ΕΓ ΕΙΡΙΔΙ
ΛΕΙΤ ΥΡΓΙΑΣ
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
MANUAL DE INSTRUÇÕES
KEEP THIS MANUAL FOR FUTURE REFERENCE
BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF
CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE
CONSERVE ESTE MANUAL PARA SU FUTURA CONSULTA
CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI
ΦΥΛΑ ΤΕ Τ ΕΓ ΕΙΡΙΔΙ
ΓΙΑ ΜΕΛΛ ΝΤΙΚΗ ΑΝΑΦ ΡΑ
СОХРАНИТЕ ДАННОЕ РУКОВОДСТВО ДЛЯ СПРАВОК В БУДУЩЕМ
P/N9374136117
GUARDE ESTE MANUAL PARA REFERÊNCIA FUTURA
Table of Contents
Related Manuals for Fujitsu Remote Control
Summary of Contents for Fujitsu Remote Control
- Page 1 OPERATING MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE FUNCIONAMIENTO MANUALE DI ISTRUZIONI ΕΓ ΕΙΡΙΔΙ ΛΕΙΤ ΥΡΓΙΑΣ РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ MANUAL DE INSTRUÇÕES KEEP THIS MANUAL FOR FUTURE REFERENCE BEWAHREN SIE DIESES HANDBUCH ZUM SPÄTEREN NACHSCHLAGEN AUF CONSERVEZ CE MANUEL POUR RÉFÉRENCE ULTÉRIEURE CONSERVE ESTE MANUAL PARA SU FUTURA CONSULTA CONSERVARE IL PRESENTE MANUALE PER FUTURE CONSULTAZIONI ΦΥΛΑ...
-
Page 2: Table Of Contents
PREPARATION ............... 3 SWING OPERATION ............9 OPERATION ..............4 ECONOMY OPERATION ..........9 TIMER OPERATION ............6 SELECTING THE REMOTE CONTROL UNIT SLEEP TIMER OPERATION ........... 7 SIGNAL CODE .............. 10 FILTER LAMP RESET ............. 7 TROUBLESHOOTING ..........11 SAFETY PRECAUTIONS ●... -
Page 3: Name Of Parts
NAME OF PARTS Display panel Display To facilitate explanation, the accompanying illustration has been drawn to show all possible indicators; in ac- tual operation, however, the display will only show those indicators appropriate to the current operation. F Signal Transmitter 1 MODE button G Temperature SET Display 2 ECONOMY button... -
Page 4: Load Batteries
This completes the time setting and starts the clock. To Use the Remote Control Unit ● The Remote Control Unit must be pointed at signal receiver to operate correctly. ● Operating Range: About 7 meters. ● When a signal is properly received by the air conditioner, a beeping sound will be heard. -
Page 5: Operation
Cooling/Dry ......18-30 °C The thermostat cannot be used to set room temperature during the FAN mode (the temperature will not appear on the Remote Control Unit’s Display). About three seconds later, the entire display will reappear. The thermostat setting should be considered a standard value, and may differ somewhat from the actual room temperature. -
Page 6: Auto Changeover/Mode Operation
OPERATION To Stop Operation Press the START/STOP button. The OPERATION Indicator Lamp (red) will go out. About AUTO CHANGEOVER Operation ● When AUTO CHANGEOVER operation first selected, the fan will oper- AUTO: ate at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode. -
Page 7: Timer Operation
TIMER OPERATION Before using the timer function, be sure that the Remote Control Unit is set to the correct current time (☞ P. 3). If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the timer. -
Page 8: Sleep Timer Operation
SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped. If the indoor unit is connected to a wired remote controller, the wireless remote controller cannot be used to set the sleep timer. -
Page 9: Adjusting The Direction Of Air Circulation
ADJUSTING THE DIRECTION OF AIR CIRCULATION ● Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Control Unit. ● Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airflow-direction louvers have stopped moving. -
Page 10: Swing Operation
ECONOMY OPERATION Begin Air Conditioner operation before performing this procedure. To Use the ECONOMY Operation Press the ECONOMY button. “ECO” appears on the Remote Control Unit display. Economy operation begins. To Stop the ECONOMY Operation Press the ECONOMY button again. -
Page 11: Selecting The Remote Control Unit Signal Code
When two or more air conditioners are installed in a room and the remote control unit is operating an air conditioner other than the one you wish to set, change the signal code of the remote control unit to operate only the air conditioner you wish to set (four selections possible). -
Page 12: Troubleshooting
The unit operates differ- ● Are the remote control unit’s batteries dead? ently from the remote con- ● Are the remote control unit’s batteries loaded properly? trol unit’s setting: ● Are you using an air conditioner signal code other than signal...